aixservaustin.ibm.com

• Previous message: AIX Service Mail Server: "Re: New_AIXV4_Fixes"
• Maybe reply: AIX Service Mail Server: "Re: New_AIXV4_Fixes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

APAR: IY10783 COMPID: 576514500 REL: 130
ABSTRACT: LOADLEVELER NEGOTIATOR HAS MEMORY LEAK

PROBLEM DESCRIPTION:
LoadL_negotiator has a memory leak. A multi-step job with
dependencies will cause a memory leak if a step is skipped
because a dependency from an earlier step was not satisfied.

PROBLEM SUMMARY:
LoadL_negotiator has a memory leak that can cause it to run
out of memory if it is left running long enough between
restarts.

PROBLEM CONCLUSION:
The code was fixed to free memory more carefully and to
allow more memory to be used.

------

APAR: IY12522 COMPID: 5765E5400 REL: 440
ABSTRACT: CL_SWAP_HW_ADDRESS SHOWS INCORRECT LSATTR ATTRIBUTES

PROBLEM DESCRIPTION:
cl_swap_HW_address uses incorrectly "alt_addr" and
"use_alt_addr" as attributes for lsattr.

PROBLEM CONCLUSION:
Use correct attributes.

------

APAR: IY12781 COMPID: 5765E5400 REL: 440
ABSTRACT: HAES: CLSTRMGR CORE DUMPS DURING DARE OPERATION.

PROBLEM DESCRIPTION:
When performing a Dare operation the clstrmgr will coredump
with the following stack trace:
strlen 98
_doprnt 163C
vsprintf 44
Msg__7HaD 90
offline__ 30
resourceD A4
approvalC 10BC
ha_gs_dis 1098
DoMainLoo 3A4
FR7ostrea 99C
__start 8C

LOCAL FIX:
The only local fix is to stop hacmp on all nodes
and synchronize changes while hacmp is inactive.

PROBLEM SUMMARY:
Clstrmgr will core dump when performing a Dare operation.
The stack trace is as follows:
strlen 98
_doprnt 163C
vsprintf 44
Msg__7HaD 90
offline__ 30
resourceD A4
approvalC 10BC
ha_gs_dis 1098
DoMainLoo 3A4
FR7ostrea 99C
__start 8C

PROBLEM CONCLUSION:
Increase size of resource variable.

------

APAR: IY12983 COMPID: 5765E5400 REL: 440
ABSTRACT: FAILURE TO RESET RESERVE ON 7135 DISKS - HACMP,HAES

PROBLEM DESCRIPTION:
The customer was using Hitachi disks which emulate a 7135 and
when he halted one node, the other node failed on the takeover
attempt when trying to mkdev the original device after having
removed a ghost disk. Error message received was:
Method error (/etc/methods/cfgscarray):
  0514-050 Cannot perform the requested function because the
           specified device was not detected.
The problem could be reproduced on 7135 disks as well.

PROBLEM SUMMARY:
The customer was using Hitachi disks which emulate a 7135 and
when he halted one node, the other node failed on the takeover
attempt when trying to mkdev the original device after having
removed a ghost disk. Error message received was:
Method error (/etc/methods/cfgscarray):
0514-050 Cannot perform the requested function because the
specified device was not detected.
The problem could be reproduced on 7135 disks as well.

PROBLEM CONCLUSION:
The changes made by defect 293610 were not correct for the
7135 array, which does not support lun resets. This change
corrects that so that target reset is used as it used to and
in addition adds a command to try to open the disk even
if scdiskutil indicates it is not reserved, and if the open
fails it then issues a reset (old code used to always issue
either a reset alone if no reserve reported on disk, or a
reset then setting of a reserve if the disk did have a
reserve on it).

------

APAR: IY12984 COMPID: 5765E5400 REL: 440
ABSTRACT: DISK TYPE INDEPENDENT FENCING

PROBLEM DESCRIPTION:
Applications or subsystems cannot control disk fencing.

PROBLEM CONCLUSION:
Provide routines to manipulate fencing support that are
independent of the disk technology, and of the cluster
configuration.

------

APAR: IY13038 COMPID: 5765E5400 REL: 440
ABSTRACT: LIBCLM_R.A IS MISSING IN INSTALL MEDIA

PROBLEM DESCRIPTION:
libclm_r.a is not found in the HACMP 4.4.0 install CD.

PROBLEM SUMMARY:
libclm_r.a is not found in the HACMP 4.4.0/4.3.1 install CD.

PROBLEM CONCLUSION:
Ship missing library.

------

APAR: IY13294 COMPID: 5765E5400 REL: 440
ABSTRACT: NETWORK FAILURE DETECTION ON TMSSA TAKES LONGER THAN NIM SETTING

PROBLEM DESCRIPTION:
The customer was testing the time to fall over when a node
is halted and found that though the tmssa network was set to
detect failure in 6 seconds, it was taking close to 60 seconds
for this network to fail.

PROBLEM CONCLUSION:
The tmssa network module (nim) was changed to use
non-blocking writes so that error retries by the hardware
would not keep the nim from continuing to look for received
data. This change required a change to the Makefile as well
and to read the status of the write at the correct point.
Some additional debug information was also added to
jim_main.c which will provide this information for all
nims.

------

APAR: IY13432 COMPID: 5765E5400 REL: 440
ABSTRACT: ADD SUPPORT FOR SDD IN CONCURRENT MODE

PROBLEM DESCRIPTION:
HACMP does not accept a vpath device as concurrent capable,
nor does it take over and process the disks correctly.

PROBLEM CONCLUSION:
Correctly handle the particular characteristics of SDD 1.2
vpath disks.

------

APAR: IY13529 COMPID: 5765C3403 REL: 430
ABSTRACT: IKE CMD=LIST CANNOT GET TUNNEL INFO

PROBLEM DESCRIPTION:
When using ike=list, get following error message
"Could not get tunnel from tunnel manager."

PROBLEM CONCLUSION:
This is because there is locking problem in tmd. When tmd
receives P2_err_msg from isakmpd, it locks P2_collection, but
it wouldn't relase the lock if this P2 tunnel was already
deleted.
The lock is relased in this fix.

------

APAR: IY13935 COMPID: 5765E5400 REL: 440
ABSTRACT: HACMP/HAES: CLDARE MOVING RESOURCE, STOP_SERVER NOT PASSED

PROBLEM DESCRIPTION:
When using cldare to move a resource group, the APPLICATION
variable arguments are not passed correctly, which causes
stop_server, called from node_down_local, to fail to stop
the application server.

PROBLEM CONCLUSION:
Make changes to scripts, reconfig_resource_acquire.sh
reconfig_resource_complete.sh, and
reconfig_resource_release.sh, to export the environment
variables correctly.

------

APAR: IY13955 COMPID: 5765E5400 REL: 440
ABSTRACT: INAPPROPRIATE ERR MESSAGES TO CONSOLE ON SYSTEM SHUTDOWN -HACMP,

PROBLEM DESCRIPTION:
When the customer issued a shutdown -Fr command the following
inappropriate error messages were issued to the console:
 dspmsg: 1312-042 Invalid argument index in message. May need
   more arguments on the command line.
xxxxxxxxxx
!!!!!ERROR!!!!!
xxxxxxxxxx
Could not varyoffvg
513-004 The Subsystem or Group clstrmgrES, is currently
  inoperative.

PROBLEM SUMMARY:
When the customer issued a shutdown -Fr command the following
inappropriate error messages were issued to the console:
dspmsg: 1312-042 Invalid argument index in message. May need
more arguments on the command line.
xxxxxxxxxx
!!!!!ERROR!!!!!
xxxxxxxxxx
Could not varyoffvg
513-004 The Subsystem or Group clstrmgrES, is currently
inoperative.

PROBLEM CONCLUSION:
The message index was corrected in the hacmp.clean and
hacmp.term scripts.

------

APAR: IY13984 COMPID: 5765E5400 REL: 440
ABSTRACT: SWAP_ADAPTER FAILS WHEN MANY ALIAS IP ADDRS EXIST - HACMP,HAES,H

PROBLEM DESCRIPTION:
The customer was adding a large number of alias IP addresses
for a webserver application. In testing this with HACMP, the
swap_adapter event would fail because it could not find the
standby adapter interface.

PROBLEM SUMMARY:
The customer was adding a large number of alias IP addresses
for a webserver application. In testing this with HACMP, the
swap_adapter event would fail because it could not find the
standby adapter interface.

PROBLEM CONCLUSION:
The clgetif executeable was changed to allocate a larger
buffer for the configured addresses. It now allocates
enough for 1024 entries instead of the 128 that it was
previously allocating.

------

APAR: IY13985 COMPID: 5765E5400 REL: 440
ABSTRACT: SWAP ADDRESS PASSES IP ADDRS IN WRONG ORDER TO SWAP_ADAPTER - HA

PROBLEM DESCRIPTION:
The customer was adding many alias IP addresses and was testing
HACMP functions with these aliases. The customer was using
the Swap Network Adapter function through the HACMP smit panels
for testing this and it was noticed that the addresses to be
swapped were passed in to swap_adapter in the wrong order.

PROBLEM SUMMARY:
The customer was adding many alias IP addresses and was testing
HACMP functions with these aliases. The customer was using
the Swap Network Adapter function through the HACMP smit panels
for testing this and it was noticed that the addresses to be
swapped were passed in to swap_adapter in the wrong order.

PROBLEM CONCLUSION:
Corrected the order of passing of addresses to swap_adapter
event from clswapaddress.sh.

------

APAR: IY14019 COMPID: 5765E5400 REL: 440
ABSTRACT: HA44_INSTALL.HTM FILE CANNOT BE CORRECTLY DISPLAYED BY NETSCAPE

PROBLEM DESCRIPTION:
ha44_install.htm file when displayed by Netscape 4.7i will keep
moving the left margin until only one word is displayed per
line.

LOCAL FIX:
Use ha44_install.ps or ha44_install.pdf files.

PROBLEM SUMMARY:
Replacing Install html file.

PROBLEM CONCLUSION:
Created new html file.

------

APAR: IY14083 COMPID: 576550500 REL: 210
ABSTRACT: PS2AFP TRANSFORM APPEARS TO HANG OR LOOP AFTER SUBMISSION

PROBLEM DESCRIPTION:
The ps2afp transform in PSF for AIX 2.1.0 can be disabled if
you send a truncated PostScript file to it. The file this
customer sent was exactly 1,000,000 bytes in length, and ended
in the middle of a PostScript page. Subsequent jobs appear to
hang processing, and never RIP.

LOCAL FIX:
Use the ps -ef | grep ps2afpd command to determine the PID
number for the daemon process ps2afpd, and kill the process.
Once you restart the daemon the problem is eliminated. The
daemon is unable to kill the interpreter from the previous
processing of the truncated PostScript file.

PROBLEM SUMMARY:
PS2AFP transform appears to hang or loop after
submission and failure of previous job containing truncated
postscript.

PROBLEM CONCLUSION:
Code was changed to correct this problem.

------

APAR: IY14218 COMPID: 5765E5400 REL: 440
ABSTRACT: GATED INCORRECTLY STARTED WHEN A PROCESS NAME HAS THE NAME

PROBLEM DESCRIPTION:
The applications is IBM Secureway Wireless Gateway 5.1.3.1
which runs a process called wgated. HACMP is checking to see
if gated is running by issuing a ps -ef | grep gated. It finds
wgated, assumes gated should be running and tries to start
gated. When gated is started, it interferes with wgated.

LOCAL FIX:
In cl_swap_IP_address, change lines from:
ps -ef|grep gated |grep -v grep 2> /dev/null
to
ps -efo "pid,comm" | grep -w gated 2> /dev/null
and the lines:
ps -efo pid,comm | grep gated | grep -v grep 2> /dev/null
to
ps -efo "pid,comm" | grep -w gated 2> /dev/null

PROBLEM SUMMARY:
The applications is IBM Secureway Wireless Gateway 5.1.3.1
which runs a process called wgated. HACMP is checking to see
if gated is running by issuing a ps -ef | grep gated. It finds
wgated, assumes gated should be running and tries to start
gated. When gated is started, it interferes with wgated.

PROBLEM CONCLUSION:
Change lines which grep for gated in the process table so
that they match only the word "gated".

------

APAR: IY14219 COMPID: 5765E5400 REL: 440
ABSTRACT: CLVERIFY DISPLAYS VG NAME INSTEAD OF LV NAME IN ERROR MESSAGE.

PROBLEM DESCRIPTION:
If, by mistake, a logical volume is created in a shared
VG and the new info is nor imported on the other hacmp
nodes, the following incorect error message is displayed:
ERROR: Logical volume testvg not found for VG testvg on
node testnode2. Note that the volume group name is
displayed instead of the logical volume name.

PROBLEM SUMMARY:
If, by mistake, a Logical Volume is created inside a shared
VG, and the the VG is not reexported and reimported on
the remote nodes, Cluster Verification will display the
following incorrect ERROR message:
ERROR: Logical volume testvg not found for VG testvg on node
testnode2.
Note that the volume group name is displayed instead of the
logical volume name.

PROBLEM CONCLUSION:
Modify clver to display the logical volume name.

------

APAR: IY14245 COMPID: 5765E5400 REL: 440
ABSTRACT: SWAP_ADAPTER FAILS AFTER MOVING RESOURCE GROUP TO ANOTHER

PROBLEM DESCRIPTION:
The swap_adapter event will fail on a node which has
assumed a resource group through a sticky migration
if the service ip label and the node name are the same.

LOCAL FIX:
 hange the line in swap_adapter from:
to
 ROUP=$(odmget -q "value=$SERVICE_LABEL" HACMPresource
GROUP=$(odmget -q "name=SERVICE_LABEL and value=$SERVICE_LABEL"
HACMPresource | grep -w group | awk '{print $3}'| sed
's/"//g')

PROBLEM CONCLUSION:
Change swap_adapter event so that odmget "group" query is more
specific.

------

APAR: IY14247 COMPID: 5765E5400 REL: 440
ABSTRACT: HANDLE CLVM CHANGES FOR HARDWARE INDEPENDENT CONCURRENT MODE

PROBLEM DESCRIPTION:
Concurrent volume groups will not be vary'd on by HACMP.

PROBLEM CONCLUSION:
Change the code in HACMP that checks for valid concurrent
volume groups to correctly recognize all types considered
valid by CLVM.

------

APAR: IY14504 COMPID: 5765E5400 REL: 440
ABSTRACT: DARE OF HACMPLOGS RUNS TOP EVENTS: SHOULD BE NO EVENTS

PROBLEM DESCRIPTION:
DARE in a change to HACMP logs directories on HAES runs a
topology reconfig instead of a resource reconfig. On HAS, no
reconfig is run at all.

PROBLEM CONCLUSION:
Integrated HACMPlogs check sum functionality into both HAS and
HAES to catch a change in the HACMPlogs ODM, and to trigger
a resource reconfig.

------

APAR: IY14505 COMPID: 5765E5400 REL: 440
ABSTRACT: MISSING SMIT FASTPATHS FOR CSPOC COMMANDS

PROBLEM DESCRIPTION:
The following CSPOC commands do not have
SMIT fastpaths as described in the manpages.
cl_rmfs
cl_rmlv
cl_lsvg
cl_lsuser
cl_lsgroup
cl_chlv
cl_chfs

PROBLEM CONCLUSION:
Added the needed stanzas to the cspoc smit file.

------

APAR: IY14506 COMPID: 5765E5400 REL: 440
ABSTRACT: DARE RESOURCE CHANGE CAUSES CONSOLE MSG: FILE DOES NOT EXIST

PROBLEM DESCRIPTION:
in HAS, a DARE resource change results in a message appearing
on the console of every node EXCEPT the alphabetically first
node, at the very end of the DARE. The message is
"/usr/sbin/cluster/etc/objrepos/stage: A file or directory in
the path name does not exist." Of course, the SCD should not
exist at the end of a DARE, so this isn't really an error. It
is nonetheless potentially confusing to our users.

PROBLEM CONCLUSION:
The message is produced by logPerror, which sends its message
to both cm.log and the console. A new function, QlogPerror,
was created, to emit messages only to cm.log. Then this
function was used in the offending line instead of logPerror.

------

APAR: IY14508 COMPID: 5765E5400 REL: 440
ABSTRACT: C-SPOC MKVG LEAVES VG ON FIRST NODE VARIED ON

PROBLEM DESCRIPTION:
When C-SPOC mkvg (cl_mkvg) is run, the vg remains varied on.

PROBLEM CONCLUSION:
Add logic to cl_mkvg to do a varyoffvg.

------

APAR: IY14509 COMPID: 5765E5400 REL: 440
ABSTRACT: SUPPORT THE COLONY SWITCH IN SINGLE/SINGLE MODE

PROBLEM DESCRIPTION:
The Estart and Eunfence commands will fail in the node_up
and node_down sequence resulting in an event failure.

PROBLEM CONCLUSION:
The Estart and Eunfence commands will be skipped if the switch
type is Colony.

------

APAR: IY14510 COMPID: 5765E5400 REL: 440
ABSTRACT: HAES/RSCT 1.2 FAIL_STANDBY NOT RUN AFTER SWAP_ADAPTER

PROBLEM DESCRIPTION:
After a swap_adapter event is run, a fail_standby event should
occur for the standby adapter that now holds the service
address. This is not happening.

PROBLEM CONCLUSION:
Add logic to generate the fail_standby event.

------

APAR: IY14511 COMPID: 5765E5400 REL: 440
ABSTRACT: SETENVGRPN: ACQUIRES GROUP ALREADY UP ON NODE

PROBLEM DESCRIPTION:
node_up_local script is run for a resource group that is alreay
up on the node. This may occur if the node hosting the
resource group has been forced down.

PROBLEM CONCLUSION:
add code to check for a resource group being up, even if it
is the first node in the resource group to join the cluster

------

APAR: IY14514 COMPID: 5765E5400 REL: 440
ABSTRACT: REDIRECTLOGFILE ONLY WORKS ONCE

PROBLEM DESCRIPTION:
The first redirection of the clstrmgr.debug file will work,
but subsequent redirections will not work.

PROBLEM CONCLUSION:
The problem is in the RedirectLog function of the hacmpdbg
class. This function assigned the address of a string pointer
to another rather than copying the contents.

------

APAR: IY14516 COMPID: 5765E5400 REL: 440
ABSTRACT: FALLOVER TAKES TOO LONG WITH BIGVGS - HACMP,HAES

PROBLEM DESCRIPTION:
The customer is using bigvgs and found that a fallover was
taking a very long time, >16 minutes with 4 vgs composed of
> 300 disks. The customer found that most of this time was
related to LVM commands such as lsvg and specfically an lsvg
command which was being issued to determine if there were
any STALE lvs so that syncvg should be issued. The
get_disk_vg_fs script was calling cl_sync_vgs with indication
to schedule sync in background but the lsvg to determine
whether to syncvg or not was issued in foreground.

PROBLEM SUMMARY:
The customer is using bigvgs and found that a fallover was
taking a very long time, >16 minutes with 4 vgs composed of
> 300 disks. The customer found that most of this time was
related to LVM commands such as lsvg and specfically an lsvg
command which was being issued to determine if there were
any STALE lvs so that syncvg should be issued. The
get_disk_vg_fs script was calling cl_sync_vgs with indication
to schedule sync in background but the lsvg to determine
whether to syncvg or not was issued in foreground.

PROBLEM CONCLUSION:
Replaced the call to cl_sync_vgs in get_disk_vg_fs with a
subroutine which is scheduled in the background for each vg
and the determination of whether to syncvg or not is done
within the bacgrounded subroutine.

------

APAR: IY14517 COMPID: 5765E5400 REL: 440
ABSTRACT: SYNC SHOULD NOT USE ACD IF CLUSTER DOWN

PROBLEM DESCRIPTION:
When doing a cluster sync the active ODM should not be used
if the cluster is down.

PROBLEM SUMMARY:
clstrmgr exits when started because cluster_version = 0 in
HACMPcluster ODM.

PROBLEM CONCLUSION:
When a sync of the cluster is started check if the clstrmgr
is not running and the cluster_version is the same in the ACD
and DCD, if they are not equal remove the ACD.

------

APAR: IY14523 COMPID: 5765E5400 REL: 440
ABSTRACT: UPDATE TO HACMP INSTALLATION GUIDE DOC-HACMP-R440

PROBLEM DESCRIPTION:
HACMP R440 Installation Guide Updates

------

APAR: IY14524 COMPID: 5765E5400 REL: 440
ABSTRACT: CL_SNAAPP FAILS WITH KSH: XX01: NOT FOUND ERROR

PROBLEM DESCRIPTION:
cl_SNAapp fails with ksh: xx01: not found error or
ksh: xx03: not found error. This happens because the
rm of the file can happen before the background shell
starts.

PROBLEM SUMMARY:
The defined Highly Available Communications Link startup script
may fail to start or stop the application layer processes.

PROBLEM CONCLUSION:
Don't delete the script after it is started in the background.
Add a call to stop in cl_stop_snalink.
Add note to README UPDATE.

------

APAR: IY14525 COMPID: 5765E5400 REL: 440
ABSTRACT: HAS:SWAP_ADDRESS TO SWAP BOOT ADDRESS TO STANDBY ADDRESS FAILS

PROBLEM DESCRIPTION:
In HAS:
Calling a swap_address (NOT a swap_adapter) event to swap a
boot address with a standby address fails with failure text
going to hacmp.out indicating that SNA_CONNECTIONS is not
set.
Swapping a service address that is in a resource group with a
standby works fine.
A workaround is to comment out the "set -u" line in
/usr/sbin/cluster/events/swap_address.

PROBLEM CONCLUSION:
Skip over code that deals with resource groups by checking if
the $GROUP variable is empty.

------

APAR: IY14527 COMPID: 5765E5400 REL: 440
ABSTRACT: WHEN ADDING ERROR NOTIFY METHOD ALL SHOULD NOT BE CHOICE FOR

PROBLEM DESCRIPTION:
If the All choice is selected for Error Label in add notify
method the actions required to support this are not done.
The All was not an intended function because and will not
work for emulation or notify.

PROBLEM CONCLUSION:
Remove the echo All for the -l case.

------

APAR: IY14528 COMPID: 5765E5400 REL: 440
ABSTRACT: HACMP OEM DISK ENABLEMENT

PROBLEM DESCRIPTION:
When HACMP is run with OEM disks, its decisions as to the
technique used for disk takeover will not be based on the
characteristics of the disks themselves, but by whatever
is the 'default' case in the code, as a result of not finding
a match between the device definition and those that HACMP
is designed to support.

PROBLEM CONCLUSION:
Function added to the product to enable use of OEM disks with
HACMP.

------

APAR: IY14556 COMPID: 5765E5400 REL: 440
ABSTRACT: SYNCHRONIZATION OR VERIFICATION GIVES ERROR ABOUT HW ADDRESS OF

PROBLEM DESCRIPTION:
HACMP Topology or Resources Verification or Synchronization
gives error about Hardware address of ATM at<x> interface.

LOCAL FIX:
No needed; ignore errors.

PROBLEM CONCLUSION:
ver_get_addr_info will append the interface number (selector
byte) as the 7th byte to ATM adapter HW address.

------

APAR: IY14683 COMPID: 5765E5400 REL: 440
ABSTRACT: HACMP TO SET SDD PR KEY HACMP-HAES-ENH

PROBLEM DESCRIPTION:
Serial access (non-concurrent) volume groups can be vary'd on
on multiple nodes when SDD persistent reserve support used.

PROBLEM CONCLUSION:
Have HACMP put together a reasonably unique PR key and put
it in the ODM for SDD usage.

------

APAR: IY15120 COMPID: 5765E5400 REL: 440
ABSTRACT: HAES: SWAP_ADAPTER FAILS WITH SNA_CONNECTIONS: PARAMETER NOT

PROBLEM DESCRIPTION:
The swap_adapter script will fail with the error
Paramter not set: SNA_CONNECTIONS

PROBLEM CONCLUSION:
Remove set -u and make error messages the same as other
releases.

------

APAR: IY15328 COMPID: 5765D2800 REL: 430
ABSTRACT: CLUSTER.MAN.EN_US MISSING FROM HACMP/ES

PROBLEM DESCRIPTION:
The installation image for cluster.man.en_US was is not
included on the HACMP/ES Installation Media.
This APAR will be used to make this image available.

PROBLEM CONCLUSION:
The installation image for cluster.man.en_US was is not
included on the HACMP/ES Installation Media.
This APAR will be used to make this images available.
To apply this PTF on an HACMP system:
1. Type "smit install_latest"
2. Specify the device or directory containing this PTF/APAR
   as the "INPUT device/directory for software" and press
   enter.
3. Press F4 List to list the SOFTWARE to install.
4. Select "cluster.man.en_US" and press enter to begin the
   install.
To reject this update, enter "smit remove" to Remove
the filesets:
        cluster.man.en_US.cspoc.data
        cluster.man.en_US.client.data
        cluster.man.en_US.server.data

------

APAR: IY15329 COMPID: 5765E5400 REL: 440
ABSTRACT: CLUSTER.MAN.EN_US MISSING FROM HACMP/ES

PROBLEM DESCRIPTION:
The installation image for cluster.man.en_US was is not
included on the HACMP/ES Installation Media.
This APAR will be used to make this image available.

PROBLEM CONCLUSION:
The installation image for cluster.man.en_US was is not
included on the HACMP/ES Installation Media.
This APAR will be used to make this images available.
To apply this PTF on an HACMP system:
1. Type "smit install_latest"
2. Specify the device or directory containing this PTF/APAR
   as the "INPUT device/directory for software" and press
   enter.
3. Press F4 List to list the SOFTWARE to install.
4. Select "cluster.man.en_US" and press enter to begin the
   install.
To reject this update, enter "smit remove" to Remove
the filesets:
        cluster.man.en_US.cspoc.data
        cluster.man.en_US.client.data
        cluster.man.en_US.server.data

------

APAR: IY15333 COMPID: 576550500 REL: 210
ABSTRACT: PCL2AFP TRANSFORM PLACES DATA INCORRECTLY. THIS IS NOT THRU

PROBLEM DESCRIPTION:
Ps2afp transfomr is placing some of the customers data incorrect
on the page. Not all data is placed incorrectly.

PROBLEM SUMMARY:
Character placed incorrectly on AIX, NT is ok.

PROBLEM CONCLUSION:
Code was changed to correct this error.

------

APAR: IY15351 COMPID: 5765C3403 REL: 433
ABSTRACT: LATEST AIX 4.3.3 UPDATES AS OF DECEMBER 2000

PROBLEM DESCRIPTION:
Order this APAR to receive the latest AIX 4.3.3 updates
available as of December 2000. These updates are applicable to
AIX 4.3.3 with the 4330-06 Recommended Maintenance Level, and
should be ordered using service level 433006.
This is not a recommended preventive service package and could
contain unresolved PTFs in error (PEs). This is simply a
packaging of the latest available updates.
This is is packaging APAR only. It will not appear in the list
of APARs on the SMIT "Update Software by Fix (APAR)" panel, nor
will the the 'instfix' command show this APAR as being installed
after the updates delivered by this package are installed.
To install selected updates from this package, use the command:
  smit update_by_fix
To install all updates from this package that apply to installed
filesets on your system, use the command:
  smit update_all

PROBLEM SUMMARY:
Packaging only.

PROBLEM CONCLUSION:
Packaging only.

------

APAR: IY15360 COMPID: 576552900 REL: 220
ABSTRACT: LATEST PSSP 2.2 FIXES AS OF DECEMBER 2000

PROBLEM DESCRIPTION:
This is the lastest PSSP ptf as of December 2000.
Order this apar to get all of the ptfs as of December 2000.

PROBLEM SUMMARY:
This is a packaging apar for PSSP 2.2 fixes
as of December 2000.

PROBLEM CONCLUSION:
This is a packaging apar for PSSP 2.2 fixes
as of December 2000.

------

• Previous message: AIX Service Mail Server: "Re: New_AIXV4_Fixes"
• Maybe reply: AIX Service Mail Server: "Re: New_AIXV4_Fixes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]