*******************************************************************************
* *
* This is an update to an existing patch... *
* *
* Online links can be found at *
* http://ftp.support.compaq.com/patches/public/vms/axp/v7.2-1/dec-axpvms-vms721_delete-v0200--4.README
*******************************************************************************

TITLE: OpenVMS VMS721_DELETE-V0200 Delete Alpha V7.2-1 ECO Summary

New Kit Date: 13-JUN-2002
Modification Date: Not Applicable
Modification Type: NEW KIT
 
NOTE: An OpenVMS saveset or PCSI installation file is stored
       on the Internet in a self-expanding compressed file.
 
       For OpenVMS savesets, the name of the compressed saveset
       file will be kit_name.a-dcx_vaxexe for OpenVMS VAX or
       kit_name.a-dcx_axpexe for OpenVMS Alpha. Once the OpenVMS
       saveset is copied to your system, expand the compressed
       saveset by typing RUN kitname.dcx_vaxexe or kitname.dcx_alpexe.
 
       For PCSI files, once the PCSI file is copied to your system,
       rename the PCSI file to kitname.pcsi-dcx_axpexe or
       kitname.pcsi-dcx_vaxexe, then it can be expanded by typing
       RUN kitname.pcsi-dcx_axpexe or kitname.pcsi-dcx_vaxexe. The
       resultant file will be the PCSI installation file which can be
       used to install the ECO.
 

 
Copyright (c) Compaq Computer Corporation 2001, 2002. All rights reserved.

OP/SYS: OpenVMS Alpha V7.2-1

COMPONENT: System

SOURCE: Compaq Computer Corporation

ECO INFORMATION:

     ECO Kit Name: VMS721_DELETE-V0200
                    DEC-AXPVMS-VMS721_DELETE-V0200--4.PCSI
     ECO Kits Superseded by This ECO Kit: None
     ECO Kit Approximate Size: 144 Blocks
     Kit Applies To: OpenVMS Alpha V7.2-1
     System/Cluster Reboot Necessary: No
     Rolling Re-boot Supported: Information Not Available
     Installation Rating: INSTALL_3
                            3 - To be installed on all systems running
                                the listed versions of OpenVMS which
                                are experiencing the problems described.
     Kit Dependencies:

       The following remedial kit(s), or later, must be installed BEFORE
       installation of this, or any required kit:

         VMS721_UPDATE-V0300
         VMS721_PCSI-V0100

       In order to receive all the corrections listed in this
       kit, the following remedial kits should also be installed:

         None

ECO KIT SUMMARY:

An ECO kit exists for System Components on OpenVMS Alpha V7.2-1. This
kit addresses the following problems:

PROBLEMS ADDRESSED IN VMS721_DELETE-V0200 KIT:

  o A PURGE/LOG <node>::[...]*.* command results in a
     SYSTEM-F-ACCVIO.

     SYSTEM-F-ACCVIO, Access violation, Reason mask=00,
     virtual address=00000000304c4154, PC=FFFFFFFF804C1CDC,
     PS=0000001B

          Images Affected: [SYSEXE]DELETE.EXE

INSTALLATION NOTES:

No reboot is necessary after successful installation of the kit.

INSTALLATION INSTRUCTIONS:

Install this kit with the {Installation Utility} utility by logging
into the SYSTEM account, and typing the following at the DCL
prompt:

PRODUCT INSTALL VMS721_DELETE /SOURCE=[location of Kit]

The kit location may be a tape drive, CD, or a disk directory that
contains the kit.

Additional help on installing PCSI kits can be found by typing
HELP PRODUCT INSTALL at the system prompt

SPECIAL INSTALLATION INSTRUCTIONS:

  o Scripting of Answers to Installation Questions

     During installation, this kit will ask and require user
     response to several questions. If you wish to automate the
     installation of this kit and avoid having to provide responses
     to these questions, you must create a DCL command procedure
     that includes the following definitions and commands:

       - $ DEFINE/SYS NO_ASK$BACKUP TRUE

       - Add the following qualifiers to the PRODUCT INSTALL
          command and add that command to the DCL procedure.

             /PROD=DEC/BASE=AXPVMS/VER=V2.0

       - De-assign the logicals assigned

     For example, a sample command file to install the
     VMS721_DELETE-V0200 kit would be:

          $
          $ DEFINE/SYS NO_ASK$BACKUP TRUE
          $!
          $ PROD INSTALL VMS721_DELETE/PROD=DEC/BASE=AXPVMS/VER=V2.0
          $!
          $ DEASSIGN/SYS NO_ASK$BACKUP
          $!
          $ exit

All trademarks are the property of their respective owners.

---

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]