Hi, Rakesh

Did you set smc2632w card in .config?
I notice you set 3c590/900 card as y, smc card not set.
And it should be set as y, not m.

Best regars,

Bin

On Mon, 7 Jan 2002, Rakesh Arora wrote:

> Hi,
> Recently I got an Orinoco Silver card working
> on my desktop using an Orinoco PCI adapter. I am using
> kernel 2.4.16 and pcmcia-cs-3.1.29. However, my
> SMC2632W card doesn't work with the same
> configuration. The only change I have made is to the
> wireless.opts file. The network.opts file is set up
> correctly as are config.opts, ifcfg-eth1 etc. The
> output of ifconfig, iwconfig and lsmod are as follows:
>
> [rootlocalhost sysconfig]# iwconfig eth1
> eth1 IEEE 802.11-DS ESSID:"1e8146"
> Nickname:"localhost.localdomain"
> Frequency:2.412GHz Sensitivity:1/3 Mode:Managed
> Access Point: 00:02:2D:1E:81:46
> Bit Rate:11Mb/s RTS thr:off Fragment thr:off
> Power Management:off
> Link quality:92/92 Signal level:2/153 Noise
> level:108/153
> Rx invalid nwid:0 invalid crypt:0 invalid misc:0
> Segmentation fault (core dumped)
>
>
> [rootlocalhost sysconfig]# ifconfig eth1
> eth1 Link encap:Ethernet HWaddr
> 00:04:E2:1E:05:57
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:9 Base address:0x100
>
>
> [rootlocalhost /root]# lsmod
> Module Size Used by
> orinoco_cs 4416 0
> orinoco 30160 0 [orinoco_cs]
> hermes 3328 0 [orinoco_cs orinoco]
> ds 6736 1 [orinoco_cs]
> yenta_socket 8816 1
> pcmcia_core 39040 0 [orinoco_cs ds
> yenta_socket]
> 3c59x 25920 1 (autoclean)
>
> I hope that someone in the list can tell me what I am
> doing wrong and guide me in the right direction.
>
> Thanks a lot,
> rakesh
>
> __________________________________________________
> Do You Yahoo!?
> Send FREE video emails in Yahoo! Mail!
> http://promo.yahoo.com/videomail/
>
>

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]