Thanks for the suggestion Bin. But that is not the
problem since the SMC options (two of them) appear
under Ethernet cards in .config.

I have CONFIG_HERMES=m, CONFIG_PCMCIA_HERMES=m,
CONFIG_NET_RADIO=y, CONFIG_NET_WIRELESS=y set in my
config file, which I think should take care of my
SMC2632W card. Can someone correct me if I am missing
something in my .config? Also does anyone have any
other suggestions. If someone could mail me their
working .config file, then it would be great (email:
rake_arora AT yahoo dot com).

Thanks,
rakesh

--- Bin Zhou <binzhousite.uottawa.ca> wrote:
>
> Hi, Rakesh
>
> Did you set smc2632w card in .config?
> I notice you set 3c590/900 card as y, smc card not
> set.
> And it should be set as y, not m.
>
> Best regars,
>
> Bin
>
> On Mon, 7 Jan 2002, Rakesh Arora wrote:
>
> > Hi,
> > Recently I got an Orinoco Silver card
> working
> > on my desktop using an Orinoco PCI adapter. I am
> using
> > kernel 2.4.16 and pcmcia-cs-3.1.29. However, my
> > SMC2632W card doesn't work with the same
> > configuration. The only change I have made is to
> the
> > wireless.opts file. The network.opts file is set
> up
> > correctly as are config.opts, ifcfg-eth1 etc. The
> > output of ifconfig, iwconfig and lsmod are as
> follows:
> >
> > [rootlocalhost sysconfig]# iwconfig eth1
> > eth1 IEEE 802.11-DS ESSID:"1e8146"
> > Nickname:"localhost.localdomain"
> > Frequency:2.412GHz Sensitivity:1/3 Mode:Managed
>
> > Access Point: 00:02:2D:1E:81:46
> > Bit Rate:11Mb/s RTS thr:off Fragment thr:off
>
> > Power Management:off
> > Link quality:92/92 Signal level:2/153 Noise
> > level:108/153
> > Rx invalid nwid:0 invalid crypt:0 invalid misc:0
> > Segmentation fault (core dumped)
> >
> >
> > [rootlocalhost sysconfig]# ifconfig eth1
> > eth1 Link encap:Ethernet HWaddr
> > 00:04:E2:1E:05:57
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:3 errors:0 dropped:0 overruns:0
> carrier:0
> > collisions:0 txqueuelen:100
> > Interrupt:9 Base address:0x100
> >
> >
> > [rootlocalhost /root]# lsmod
> > Module Size Used by
> > orinoco_cs 4416 0
> > orinoco 30160 0 [orinoco_cs]
> > hermes 3328 0 [orinoco_cs
> orinoco]
> > ds 6736 1 [orinoco_cs]
> > yenta_socket 8816 1
> > pcmcia_core 39040 0 [orinoco_cs ds
> > yenta_socket]
> > 3c59x 25920 1 (autoclean)
> >
> > I hope that someone in the list can tell me what I
> am
> > doing wrong and guide me in the right direction.
> >
> > Thanks a lot,
> > rakesh
> >

__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]