OSEC

Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com
 
From: Stephen Liu (satimiswriteme.com)
Date: Mon Jun 17 2002 - 03:05:51 CDT

  • Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

    Hi Ray,

    Lot of thanks for your information.

    Stephen

    At 09:30 PM 2002/6/15 -0700, Ray wrote:
    >On Fri, Jun 14, 2002 at 09:47:12AM +0800, Stephen Liu wrote:
    > > Hi Ray,
    > >
    > > Thanks for your response.
    > >
    > > Could you please give me more detail. Or any pointer shall be
    > appreciated.
    > >
    > > I am now testing a K12 Terminal Server project.
    >
    >Basically I just start with a used PC, usually 486 or Pentium based thin
    >desktops but just about anything will do. I consider a 486dx33, 16M ram,
    >and 400MB hard drive to be a minimum for an easy setup but you can get away
    >with less if necessary. I typically add 1 network card, a pcmcia/isa
    >adapter, a modem, and a second ethernet card if I need a DMZ. the modem is
    >handy for a backup internet connection or to allow remote access in case
    >there are problems. For software I use the Debian Linux distro. I
    >temporarly attach a CD (or just clone an existing box) and choose a bare
    >miimum of packages. I then add dhcp, ssh, mgetty, joe, and anything else
    >that looks usefull (depending on available disk space, it's easy to over do
    >it and run out of space). An alternative to a full Linux distro is one of
    >the LRP (Linux Router Project) based distros. They are smaller (many fit on
    >a single floppy) and there are some commercial versions that add nice gui
    >config tools. These should be ok for just a router but if you want a print
    >server, Squid proxy etc. a normal distro such as Debian is probably a better
    >choice. If you go with Debian don't forget to check out the Books secion of
    >their web site since there is at least one good free Debian book. You'll
    >probably be using ipchains or iptables for firewalling and NAT. There are
    >several decent config tools for these but I prefer to set them up manually.
    >A google search for "iptables sample scripts" should help here.
    >
    >Some Links:
    >
    >http://www.debian.org Debian
    >http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ Linux & Wireless
    >lan card support
    >http://www.ltsp.org/index.php Linux Terminal
    >Server Project
    >http://www.linuxrouter.org Linux Router Project
    >
    >I hope this helps.
    >
    >--
    >Ray