OSEC

Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com
 
From: BJORKMAN MARTIN (MARTIN.BJORKMAN_at_SiemensSG.com)
Date: Fri Jul 26 2002 - 09:59:00 CDT

  • Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

    Goodmorning boys and girls!

    I've a slight problem getting a Siemens I-Gate card working under linux
    2.4.18. I use the lnwg-ng drivers which should work.

    The card is a PCMCIA situated in a PCI->PCMCIA adapter.

    I have the correct SSID, macadress of the AP, no irq conflicts, and so on
    and so forth.

    modprobe prism2_plx
    wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
    wlanctl-ng wlan0 lnxreq_autojoin ssid=1WAEH2KB00VI authtype=opensystem
    ifconfig wlan0 137.223.140.141 netmask 255.255.254.0 broadcast
    137.223.140.255
    route add default gw 137.223.140.1

    And an ifconfig gets me:
    wlan0 Link encap:Ethernet HWaddr 00:90:D1:00:6D:B5
              inet addr:137.223.140.141 Bcast:137.223.140.255
    Mask:255.255.254.0
              UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:100
              RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
              Interrupt:5 Base address:0x3400

    dmesg doesn't reveal anything intressting at all, it finds the card and
    everything seems to be fine..

    Any ideas ?
    Too bad Siemens doesn't support linux =/ 

    --
Martin Bjørkman
Siemens support Norway 
Telefon: 22708400
Fax:     22708401
Int ext. 8919
"Kotae wa nai sa   Mayowasete gomen ne"