Hi,

I am trying to use the Compaq WL100 card but I am having problems (I think
to do with the configuration).

I have attached the debug output below.

When the card is inserted, I can immediately see the interface wlan0 when
using ifconfig.

I've had a look at the configuration script, and the part where it is
bombing out is when the following command is given :
wlanctl-ng wlan0 dot11req_associate "listeninterval=0"

A short period after this fails, I can no longer view the interface wlan0
using ifconfig.

Any information as to what the problem is would be much appreciated as I'm
not particularly knowledgable about wlan.

Thanks very much,
Talei.

============================================================================
==================

cardmgr[62]: initializing socket 0
cardmgr[62]: socket 0: Compaq WL100 11Mb/s WLAN Card
cardmgr[62]: executing: 'modprobe prism2_cs'
p80211.o: 0.1.7 Loaded
init_module: prism2_cs.o: 0.1.7 Loaded
init_module: dev_info is: prism2_cs
bitsy_pcmcia_configure_socket: socket=0 vcc=50 reset=0
bitsy_pcmcia_configure_socket: finished
bitsy_pcmcia_configure_socket: socket=0 vcc=50 reset=0
bitsy_pcmcia_configure_socket: finished
prism2_cs: index 0x01: Vcc 5.0, irq 42, io 0xf6000000-0xf600003f
ident: nic h/w: id=0x8002 1.0.1
ident: pri f/w: id=0x15 0.2.1
ident: sta f/w: id=0x1f 0.8.0
sizeof(hfa384x_caplevel_t)=10
MFI:SUP:role=0x00:id=0x01:var=0x00:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x00:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/1
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/5
PRI-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 39 39 53 41 30 31 30 30 30 30 30 30
cardmgr[62]: executing: './wlan-ng start wlan0'
cardmgr[62]: + message=dot11req_mibset
cardmgr[62]: + mibattribute=dot11DesiredSSID=linux-wlan
cardmgr[62]: + resultcode=success
cardmgr[62]: + message=dot11req_associate
cardmgr[62]: + peerstaaddress=no_value
cardmgr[62]: + associatefailuretimeout=no_value
cardmgr[62]: + cfpollable=no_value
cardmgr[62]: + cfpollreq=no_value
cardmgr[62]: + privacy=no_value
cardmgr[62]: + listeninterval=262144
cardmgr[62]: + resultcode="argument_item_data_is_invalid"
sh-2.04# cardmgr[62]: + Operation failed.

- Talei.

-----------------------------------------------
The Linux WLAN User's Mailing List
For more information about this list see:
http://www.absoval.com/linux-wlan/lists.html

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]