> cardmgr[62]: initializing socket 0
> cardmgr[62]: socket 0: Compaq WL100 11Mb/s WLAN Card
> cardmgr[62]: executing: 'modprobe prism2_cs'
> p80211.o: 0.1.7 Loaded
> init_module: prism2_cs.o: 0.1.7 Loaded
> init_module: dev_info is: prism2_cs
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 reset=0
> bitsy_pcmcia_configure_socket: finished
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 reset=0
> bitsy_pcmcia_configure_socket: finished
> prism2_cs: index 0x01: Vcc 5.0, irq 42, io 0xf6000000-0xf600003f

vcc 5.0 is wrong, these cards usually operate at 3.3 V

i dont know if this will solve your problem

my wl100 cards dont work at all at 5.0 V

try setting the card to 3.3 V

probably, you have to do this manually by editing i82365.c or whatever you
are using, if you want, i can send you a patch for i82365.c, which forces
all cards to operate at 3.3 V (for pcmcia-cs 3.1.24)

and irq42 also sounds strange... what kind of system are you using ?

Gruß,
Thorsten
__________________________________________________________
Thorsten Jungblut
Universität Koblenz, Fachbereich Informatik
tjungbluuni-koblenz.de -> ask for pgp public key

-----------------------------------------------
The Linux WLAN User's Mailing List
For more information about this list see:
http://www.absoval.com/linux-wlan/lists.html

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]