From: Gambin Dejan (Dejan.Gambinpula.hr)
Date: Mon Apr 10 2006 - 08:06:31 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Thanks Karsten...now I have cretaed the keypair successfully....if I can
only know how to install the cert and try using PKCS#11...or at least
how to debug it so I can see what is going wrong??

dejan

> -----Original Message-----
> From: muscle-bounceslists.musclecard.com
> [mailto:muscle-bounceslists.musclecard.com] On Behalf Of Karsten Ohme
> Sent: Monday, April 10, 2006 2:56 PM
> To: MUSCLE
> Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>
>
> Gambin Dejan wrote:
> > I am using a new applet. How do I "log in"? Do I need to run verify
> > command before doing something like genkeys? resume rsa gives me:
>
> Use rsacrt instead of rsa. The JCOP only generates RSA CRT
> keys. The resume command and the applet cannot differentiate this.
>
> Karsten
> >
> > 00CC
> >
> > RSA Capabilities Supported
> > ---------------------------------------------------------------
> >
> > Possible Key Lengths:
> >
> > 512 Bit
> > 768 Bit
> > 1024 Bit X
> > 2048 Bit X
> > 512 Bit CRT
> > 768 Bit CRT
> > 1024 Bit CRT X
> > 2048 Bit CRT X
> >
> > Possible Key Generations:
> >
> > 512 Bit
> > 768 Bit
> > 1024 Bit
> > 2048 Bit
> > 512 Bit CRT
> > 768 Bit CRT
> > 1024 Bit CRT X
> > 2048 Bit CRT X
> >
> > Possible Signature Algorithms:
> >
> > Signature with MD5 Hash and PKCS#1 Padding X
> > Signature with MD5 Hash and RFC 2409 Padding
> > Signature with RIPE MD-160 Hash and ISO 9796 Padding Signature with
> > RIPE MD-160 Hash and PKCS#1 Padding Signature with SHA-1
> Hash and ISO
> > 9796 Padding
> > Signature with SHA-1 Hash and PKCS#1 Padding X
> > Signature with SHA-1 Hash and RFC 2409 Padding
> > Signature with SHA-1 Hash and PKCS#1-PSS Padding
> > Signature with MD5 Hash and PKCS#1-PSS Padding
> > Signature with RIPE MD-160 Hash and PKCS#1-PSS Padding
> >
> > Possible Cipher Algorithms:
> >
> > Cipher with ISO 14888 Padding
> > Cipher with ISO 9796 Padding
> > Cipher with No Padding X
> > Cipher with PKCS#1 Padding X
> > Cipher with PKCS#1-OAEP Padding
> > GetCapabilities Successful
> >
> > I tried running "genkey rsa 1024" and "verify 1" before
> that (I have
> > setstatus for keygeneration to 0x0002, is it OK). I
> specified 6 and 7
> > for key numbers and 0x0002 for all ACLs. I get "Feature unsupported"
> > (9C05) error....
> >
> > dejan
> >
> >
> >>-----Original Message-----
> >>From: muscle-bounceslists.musclecard.com
> >>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
> Karsten Ohme
> >>Sent: Monday, April 10, 2006 12:16 PM
> >>To: MUSCLE
> >>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
> >>
> >>
> >>Gambin Dejan wrote:
> >>
> >>>Well, I don't know where to go from here. MuscleTools gives me the
> >>>following:
> >>>
> >>>1. resume lists many MSCxxx functions and all have "X" under
> >>>"Supported". Does it mean "supported" or "not supported"?
> >>
> >>x is supported.
> >>
> >>
> >>>2. status gives me:
> >>>
> >>> Protocol Version: 1.30
> >>
> >>You have used the new applet? I thought you wanted to use the
> >>old applet? I think 1.30 is the version for new applets.
> But it is OK.
> >>
> >>
> >>> Software Version: 1.1
> >>> Free Memory: 9998
> >>> Total Memory: 10000
> >>> PINs Used: 2
> >>> Keys Used: 0
> >>> Logged IDs: NONE
> >>> How can create IDs:
> >>> PIN #1
> >>>How can create objects:
> >>> PIN #1
> >>> How can create keys:
> >>> PIN #1
> >>> Card Label: Not set.
> >>> Serial Number: Not set.
> >>>GetStatus Successful
> >>>
> >>>3. Genkeys rsa 1024 fails with "Feature unsupported" (I have set
> >>>public key number to 0 and private to 1 don't know if this is
> >>>correct!)
> >>
> >>If you have used the new applet, the first available key
> >>number is 6, the numbers below are reserved for external
> >>authentication, but if you have logged in with PIN#1
> >>
> >>How can create IDs:
> >>
> >>> PIN #1
> >>
> >>you should also be able to use the lower key numbers.
> >>
> >>If you have used the new applet there are a lot of
> >>compilation switches, you must specify want should be
> >>enabled. See the README.
> >>
> >>Execute a resume rsa.
> >>
> >>
> >>>4. challenge works OK
> >>>5. PIN functions work ok
> >>>6. importkey - don't know which file format do I need?
> >>
> >>Key blobs. Documented in the Card Edge specification. Read it
> >>or skip it. Someday trivial PEM oder DER encoded keys can
> be imported.
> >>
> >>Karsten
> >>
> >>>...anyway, I am wondering if maybe the problem is not in pkcs#11?
> >>>
> >>>dejan
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>-----Original Message-----
> >>>>From: muscle-bounceslists.musclecard.com
> >>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
> >>
> >>Karsten Ohme
> >>
> >>>>Sent: Monday, April 10, 2006 11:27 AM
> >>>>To: MUSCLE
> >>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
> >>>>
> >>>>
> >>>>Gambin Dejan wrote:
> >>>>
> >>>>
> >>>>>Hi,
> >>>>>
> >>>>>After importing the cert to the software security device
> >>>>
> >>>>(it is doing
> >>>>
> >>>>
> >>>>>this by default, doesn't ask anything) I get this in PKCS11.log:
> >>>>>
> >>>>>10/04 11:11:35 +C_GetSlotList : start
> >>>>>10/04 11:11:35 Active session list:
> >>>>>10/04 11:11:35 Session ID: 2AC4EB0
> >>>>>10/04 11:11:35 Returning slot count: 1
> >>>>>10/04 11:11:35 -C_GetSlotList : end RV(0x0)
> >>>>>10/04 11:11:35 +C_GetSlotInfo : start
> >>>>>10/04 11:11:35 Checking slot: 1
> >>>>>10/04 11:11:35 Active session list:
> >>>>>10/04 11:11:35 Session ID: 2AC4EB0
> >>>>>10/04 11:11:35 SlotInfo.flags: 7
> >>>>>10/04 11:11:35 -C_GetSlotInfo : end RV(0x0)
> >>>>>10/04 11:11:35 +C_GetSessionInfo : start
> >>>>>10/04 11:11:35 Active session list:
> >>>>>10/04 11:11:35 Session ID: 2AC4EB0
> >>>>>10/04 11:11:35 Session state: 0
> >>>>>10/04 11:11:35 -C_GetSessionInfo : end RV(0x0)
> >>>>>10/04 11:11:36 +C_GetSlotList : start
> >>>>>10/04 11:11:36 Active session list:
> >>>>>10/04 11:11:36 Session ID: 2AC4EB0
> >>>>>10/04 11:11:36 Returning slot count: 1
> >>>>>10/04 11:11:36 -C_GetSlotList : end RV(0x0)
> >>>>>10/04 11:11:36 +C_GetSlotInfo : start
> >>>>>10/04 11:11:36 Checking slot: 1
> >>>>>10/04 11:11:36 Active session list:
> >>>>>10/04 11:11:36 Session ID: 2AC4EB0
> >>>>>10/04 11:11:36 SlotInfo.flags: 7
> >>>>>10/04 11:11:36 -C_GetSlotInfo : end RV(0x0)
> >>>>>10/04 11:11:36 +C_GetSessionInfo : start
> >>>>>10/04 11:11:36 Active session list:
> >>>>>10/04 11:11:36 Session ID: 2AC4EB0
> >>>>>10/04 11:11:36 Session state: 0
> >>>>>10/04 11:11:36 -C_GetSessionInfo : end RV(0x0)
> >>>>>10/04 11:11:37 +C_GetSlotList : start
> >>>>>10/04 11:11:37 Active session list:
> >>>>>10/04 11:11:37 Session ID: 2AC4EB0
> >>>>>10/04 11:11:37 Returning slot count: 1
> >>>>>10/04 11:11:37 -C_GetSlotList : end RV(0x0)
> >>>>>10/04 11:11:37 +C_GetSlotInfo : start
> >>>>>10/04 11:11:37 Checking slot: 1
> >>>>>10/04 11:11:37 Active session list:
> >>>>>10/04 11:11:37 Session ID: 2AC4EB0
> >>>>>10/04 11:11:37 SlotInfo.flags: 7
> >>>>>10/04 11:11:37 -C_GetSlotInfo : end RV(0x0)
> >>>>>10/04 11:11:37 +C_GetSessionInfo : start
> >>>>>10/04 11:11:37 Active session list:
> >>>>>10/04 11:11:37 Session ID: 2AC4EB0
> >>>>>10/04 11:11:37 Session state: 0
> >>>>>10/04 11:11:37 -C_GetSessionInfo : end RV(0x0)
> >>>>
> >>>>Seems not to be much, no token, no reader detected. In
> times were it
> >>>>worked I got something like this in some situation:
> >>>>
> >>>>01/09 20:03:03 Slot 2 changed
> >>>>01/09 20:03:03 +slot_DisconnectSlot : start
> >>>>01/09 20:03:03 -slot_DisconnectSlot : end RV(0x0)
> >>>>01/09 20:03:03 Attempting establish
> >>>>01/09 20:03:03 Establish connection
> >>>>01/09 20:03:03 Begin transaction: 2, rv=0
> >>>>01/09 20:03:04 Token: MuscleCard Applet
> >>>>01/09 20:03:04 Card supports RSA
> >>>>01/09 20:03:04 Card supports RSA key gen
> >>>>01/09 20:03:04 Card supports RSA NOPAD
> >>>>01/09 20:03:04 Card supports RSA PKCS#1
> >>>>01/09 20:03:04 Card supports DES
> >>>>01/09 20:03:04 Card supports 3DES
> >>>>01/09 20:03:04 Card supports AES
> >>>>01/09 20:03:04 Attempting release
> >>>>01/09 20:03:04 Releasing connection
> (slot_ReleaseConnection) 01/09
> >>>>20:03:04 Done releasing (slot_ReleaseConnection)
> >>>>01/09 20:03:04 End transaction: 2, rv=0
> >>>>01/09 20:03:04 SlotInfo.flags: 6
> >>>>01/09 20:03:04 -C_GetSlotInfo : end RV(0x0)
> >>>>01/09 20:03:04 +C_GetSlotInfo : start
> >>>>
> >>>>Karsten
> >>>>
> >>>>
> >>>>>regards, dejan
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>-----Original Message-----
> >>>>>>From: muscle-bounceslists.musclecard.com
> >>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
> >>>>
> >>>>Karsten Ohme
> >>>>
> >>>>
> >>>>>>Sent: Monday, April 10, 2006 10:49 AM
> >>>>>>To: MUSCLE
> >>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
> >>>>>>
> >>>>>>
> >>>>>>Gambin Dejan wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>Hi,
> >>>>>>>
> >>>>>>>I have finally built MuscleTools on Windows. I had to
> >>
> >>use an older
> >>
> >>>>>>>Bison version from cygwin. I have also successfully
> >>
> >>formatted the
> >>
> >>>>>>>token using MuscleTools after installing the applet (developer
> >>>>>>>version) in Eclipse.
> >>>>>>>
> >>>>>>>After that I have built PKCS#11. There were some problems
> >>>>>>
> >>>>>>that needed
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>thread_win32.c from pcsc/lite to be installed but it
> >>
> >>went ok after
> >>
> >>>>>>>that. I have installed PKCS#11 module in Mozilla Firefox
> >>>>>>
> >>>>>>but I don't
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>know if/how can I install ther certificate onto the MuscleCard
> >>>>>>>security device? I don't have "Log in" option enabled
> so Mozilla
> >>>>>>>imports my cert.p12 into software security
> device...does it mean
> >>>>>>>PKCS#11 is not working?
> >>>>>>
> >>>>>>Token is formated? Else enable debugging for PKCS#11.
> >>
> >>There should
> >>
> >>>>>>be a file PKCS11.log under C:. Maybe it must be enabled with a
> >>>>>>configuration file. Don't know anymore. See the sources for the
> >>>>>>mentioned file how it is produced ...
> >>>>>>
> >>>>>>Karsten
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>thanks
> >>>>>>>
> >>>>>>>regards, dejan
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>-----Original Message-----
> >>>>>>>>From: muscle-bounceslists.musclecard.com
> >>>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
> >>>>>>
> >>>>>>Karsten Ohme
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>Sent: Monday, April 10, 2006 12:33 AM
> >>>>>>>>To: MUSCLE
> >>>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>Dejan Gambin wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>Thanks Karsten,
> >>>>>>>>>
> >>>>>>>>>I have realised my stupid error of not setting the path
> >>>>
> >>>>to Gnuwin32
> >>>>
> >>>>
> >>>>>>>>>bin folder so m4 wasn't found. Unfortunatelly now I am
> >>
> >>getting th
> >>
> >>>>>>>>>error:
> >>>>>>>>>
> >>>>>>>>>parser.c
> >>>>>>>>>../parser.c(1130) : error C2449: found '{' at file scope
> >>>>
> >>>>(missing
> >>>>
> >>>>
> >>>>>>>>>function heade
> >>>>>>>>>r?)
> >>>>>>>>>../parser.c(2138) : error C2059: syntax error : '}'
> >>
> >>NMAKE : fatal
> >>
> >>>>>>>>>error U1077: 'cl.exe' : return code '0x2' Stop.
> >>>>>>>>>
> >>>>>>>>>I suppose Bison can be the problem...I am using the
> >>
> >>version from
> >>
> >>>>>>>>>Gnuwin32, next I'll try to use cygwin like you proposed...
> >>>>>>>>
> >>>>>>>>Don't know. I have installed cygwin and bison. Try with both.
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>Besides, you say PKCS#11 may not work with developer
> >>>>
> >>>>version. So it
> >>>>
> >>>>
> >>>>>>>>>will be better to use the stable versions of all the
> >>>>
> >>>>libraries and
> >>>>
> >>>>
> >>>>>>>>>applets? Do you think I can use the developer versions of
> >>>>>>>>>libmusclecard, MCardPlugin (that I successfully built) and
> >>>>>>>>
> >>>>>>>>MuscleTool
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>with the old/stable applet? Or you are suggesting me
> >>>>>>
> >>>>>>something else?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>The API is different, so it will not work. Try the PKCS#11
> >>>>>>>
> >>>>>>>>from the website. Else you can use the development version
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>Makefiles but must exchange some files ...
> >>>>>>>>
> >>>>>>>>Karsten
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>Sorry to bother you :-((
> >>>>>>>>>
> >>>>>>>>>thanks very much
> >>>>>>>>>
> >>>>>>>>>regards, dejan
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>>-----Original Message-----
> >>>>>>>>>>From: muscle-bounceslists.musclecard.com
> >>>>>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
> >>>>>>>>
> >>>>>>>>Karsten Ohme
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>Sent: Sunday, April 09, 2006 9:45 PM
> >>>>>>>>>>To: MUSCLE
> >>>>>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>Dejan Gambin wrote:
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>Hi Karsten,
> >>>>>>>>>>>
> >>>>>>>>>>>Thank you very much for clearifying the things. I am
> >>>>>>>>>>
> >>>>>>>>>>participating a
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>project where the new JCOP31 v2.2 card should be used. I
> >>>>>>
> >>>>>>have got a
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>sample of cards and the first thing I have to do is trying
> >>>>>>>>>>
> >>>>>>>>>>to enable
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>some PKCS#11 enabled applications to use the card just for
> >>>>>>>>>>
> >>>>>>>>>>testing. We
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>are in a process of buidling the PKCS#15 applet for this
> >>>>>>>>>>
> >>>>>>>>>>card (so it
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>can be used by OpenSC), but the working applet is not
> >>>>>>
> >>>>>>yet ready for
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>v2.2 (it is working on old JCOP31/JCOP20 cards). In the
> >>>>>>
> >>>>>>meantime I
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>would like to try using MuscleCard applet, libmusclecard,
> >>>>>>>>>>
> >>>>>>>>>>MCardPlugin
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>and PKCS#11 on this card and to write a
> >>
> >>documentation on how to
> >>
> >>>>>>>>>>>install and use everything. I will be glad to share this
> >>>>>>>>>>
> >>>>>>>>>>document on
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>the list so maybe it could help people making everything
> >>>>>>
> >>>>>>working..
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>I don't know if it is better to use the stable
> >>
> >>version or the
> >>
> >>>>>>>>>>>developer one. I have tried the following (remember this
> >>>>>>
> >>>>>>is all on
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>Windows!):
> >>>>>>>>>>>
> >>>>>>>>>>>I went to
> http://www.musclecard.com/musclecard/index.html. I
> >>>>>>>>>>>downloaded CFlexAccess32Loader.zip and took the CardEdge
> >>>>>>
> >>>>>>bin from
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>there. I have successfully installed this bin file onto
> >>>>>>
> >>>>>>the JCOP31
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>card using the modified GPShell examples (as you told me).
> >>>>>>>>>>
> >>>>>>>>>>After that
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>I wanted to get the latest stable libmusclecard library. I
> >>>>>>>>>>
> >>>>>>>>>>found the
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>only one available on CVS (version
> >>>>>>>>>>>1.3.2) but unfortunatelly it has no documentation on how to
> >>>>>>>>>>
> >>>>>>>>>>build it on
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>Windows. The same is for muscleframework-1.1.5,
> >>>>>>>>>>
> >>>>>>>>>>MCardApplet-0.9.11 and
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>muscleTool 2.1.0.
> >>>>>>>>>>>So it looked pretty difficult to me to install it on
> >>>>>>>>>>
> >>>>>>>>>>Windows and I went to
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>your development versions. They are all on one place, they
> >>>>>>>>>>
> >>>>>>>>>>all have the
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>Install.w32 so I thought it would be easier to install.
> >>>>>>>>>>
> >>>>>>>>>>Since this developer
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>version had no cap or bin applet file, I have successfully
> >>>>>>>>>>
> >>>>>>>>>>installed the
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>applet in Eclipse,
> >>>>>>>>>>
> >>>>>>>>>>OK, but there are xml build files for Ant. But the new
> >>>>>>
> >>>>>>version are
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>compatible with the old applet, so it should work
> >>
> >>with the old
> >>
> >>>>>>>>>>version.
> >>>>>>>>>>
> >>>>>>>>>>The PKCS#11 module on the development page may not
> >>>>
> >>>>work(?). It is
> >>>>
> >>>>
> >>>>>>>>>>not updated.
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>and also libmusclecard and mscCardPlugin but I got
> >>>>>>>>>>
> >>>>>>>>>>unsupported errors
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>in muscletest. I supposed this was because of
> >>>>>>>>>>
> >>>>>>>>>>"nonpersonalized" card
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>so
> >>>>>>>>>>
> >>>>>>>>>>Can be the case.
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>I tried building the latest developer MuscleTool using the
> >>>>>>>>>>>Install.w32 documentation supplied. But running:
> >>>>>>>>>>>
> >>>>>>>>>>>nmake -f MuscleTools.mak VERSION2=
> >>>>>>>>>>>PTHREADS_INC="C:\Mydocu~1\MyDown~1\PKI\pthreads\Pre-built.2
> >>>>>>>>>>
> >>>>>>>>>>\include"
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>PTHREADS_LIB="C:\MyDocu~1\MyDown~1\PKI\pthreads\Pre-bui
> >>>>
> >>>>lt.2\lib"
> >>>>
> >>>>
> >>>>>>>>>>>PTHREADS_NAME=pthreadVC2
> >>>>>>
> >>>>>>FLEX="C:\Progra~1\GnuWin32\bin\flex.exe"
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>FLEX_INC="C:\Progra~1\GnuWin32\include"
> >>>>>>>>>>>PCSC_INC="C:\MyDocu~1\MyDown~1\PKI\libmusclecard\src\PC
> >>>>
> >>>>SC\win32"
> >>>>
> >>>>
> >>>>>>>>>>>BISON="C:\Progra~1\GnuWin32 \bin\bison.exe"
> >>>>>>>>>>>MUSCLECARD_INC="C:\MyDocu~1\MyDown~1\PKI\libmusclecard\src"
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>MUSCLECARD_LIB="C:\MyDocu~1\MyDown~1\PKI\libmusclecard\win32
> >>>>>>>>
> >>>>>>>>\release"
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>>I got: C:\Progra~1\GnuWin32\bin\flex.exe
> >>>>>>>>>>
> >>>>>>>>>>-o../scanner.c ../scanner.l
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>> C:\Progra~1\GnuWin32\bin\bison.exe -do ../parser.c
> >>>>>>>>>>
> >>>>>>>>>>../parser.y
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>C:\Progra~1\GnuWin32\bin\bison.exe: m4: No such file or
> >>>>>>
> >>>>>>directory
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>NMAKE : fatal error U1077:
> >>>>>>
> >>>>>>'C:\Progra~1\GnuWin32\bin\bison.exe' :
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>return code '0 x1' Stop.
> >>>>>>>>>>>
> >>>>>>>>>>>any help?
> >>>>>>>>>>
> >>>>>>>>>>Install the m4 macros for GnuWin32, maybe this
> >>
> >>package is named
> >>
> >>>>>>>>>>autoconf or automake. Install all.
> >>>>>>>>>>
> >>>>>>>>>>Karsten
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>dejan
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>>-----Original Message-----
> >>>>>>>>>>>>From: muscle-bounceslists.musclecard.com
> >>>>>>>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
> >>>>>>>>>>
> >>>>>>>>>>Karsten Ohme
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>>Sent: Friday, April 07, 2006 7:25 PM
> >>>>>>>>>>>>To: MUSCLE
> >>>>>>>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>Gambin Dejan wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>Hi,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>I would like to install musclecard applet onto the JCOP41
> >>>>>>>>>>>>
> >>>>>>>>>>>>card and use
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>musclecard applications after that. Can someone tell me
> >>>>>>>>>>>>
> >>>>>>>>>>>>which software
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>do I need to install, which versions,
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>and where to get all this?
> >>>>>>>>>>>>
> >>>>>>>>>>>>All from here:
> >>
> >>http://www.musclecard.com/musclecard/index.html
> >>
> >>>>>>>>>>>>The developer builds are really developer build, you
> >>>>
> >>>>can develop
> >>>>
> >>>>
> >>>>>>>>>>>>them, improve, ... the base stuff works for me, but
> >>
> >>these are
> >>
> >>>>>>>>>>>>developer builds.
> >>>>>>>>>>>>
> >>>>>>>>>>>>Download MCardApplet from
> >>>>>>>>>>>>http://web.inf.tu-dresden.de/~ko189283/MuscleCard/
> >>>>
> >>>>and read the
> >>>>
> >>>>
> >>>>>>>>>>>>README. Replace the src directory in MCardApplet with
> >>>>
> >>>>a stable
> >>>>
> >>>>
> >>>>>>>>>>>>version, linked at
> >>>>>>>>
> >>>>>>>>http://www.musclecard.com/musclecard/index.html.
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>>>There is a Ant build script for JCOP cards. This will
> >>>>
> >>>>produce a
> >>>>
> >>>>
> >>>>>>>>>>>>binary to load.
> >>>>>>>>>>>>
> >>>>>>>>>>>>It is much easier to take a ready build binary
> >>>>
> >>>>contained in the
> >>>>
> >>>>
> >>>>>>>>>>>>MuscleCardApplet loader.
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>I was successfully installed the newest musclecard
> >>>>
> >>>>applet using
> >>>>
> >>>>
> >>>>>>>>>>>>>Eclipse,
> >>>>>>>>>>>>
> >>>>>>>>>>>>You wanted to try out the latest, that means the
> >>>>>>>>
> >>>>>>>>development applet?
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>>>If you want to do this and you do not have to expect that
> >>>>>>>>
> >>>>>>>>everything
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>>>works. It is not stable!
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>but I don't know how to do it with GPShell...
> >>>>>>>>>>>>
> >>>>>>>>>>>>There is an example file to install an applet on a GP211
> >>>>>>>>
> >>>>>>>>card. Take
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>>>it. There should not be much difference. Look in
> the README.
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>after that I wanted to
> >>>>>>>>>>>>>install MuscleTools but again didn't know which
> version to
> >>>>>>>>>>>>>install.....I have downloaded 2.0.1 but couldn't
> >>>>
> >>>>install it on
> >>>>
> >>>>
> >>>>>>>>>>>>>Windows...
> >>>>>>>>>>>>
> >>>>>>>>>>>>What means could not install?
> >>>>>>>>>>>>
> >>>>>>>>>>>>Your problem about the unsupported functions is
> probably the
> >>>>>>>>>>>>following: You want to use the development applet
> >>>>
> >>>>with a stable
> >>>>
> >>>>
> >>>>>>>>>>>>muscleTool version. There is a README or Install.w32 for
> >>>>>>>>>>>>muscleTool, which explains how to use or disable the
> >>>>>>
> >>>>>>development
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>>version. If you want to use it, then you must also
> >>
> >>use all the
> >>
> >>>>>>>>>>>>development version at
> >>>>>>>>>>>>http://web.inf.tu-dresden.de/~ko189283/MuscleCard/ and
> >>>>>>
> >>>>>>maybe this
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>>will not work, fix problems if you have any, but it is a
> >>>>>>>>>>>>development version!
> >>>>>>>>>>>>
> >>>>>>>>>>>>Karsten
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>>Any help?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>thanks
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>regards, dejan
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>_______________________________________________
> >>>>>>>>>>>>>Muscle mailing list
> >>>>>>>>>>>>>Musclelists.musclecard.com
> >>>>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>>>>>>>
> >>>>>>>>>>>>_______________________________________________
> >>>>>>>>>>>>Muscle mailing list
> >>>>>>>>>>>>Musclelists.musclecard.com
> >>>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>_______________________________________________
> >>>>>>>>>>>Muscle mailing list
> >>>>>>>>>>>Musclelists.musclecard.com
> >>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>>>>>
> >>>>>>>>>>_______________________________________________
> >>>>>>>>>>Muscle mailing list
> >>>>>>>>>>Musclelists.musclecard.com
> >>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>_______________________________________________
> >>>>>>>>>Muscle mailing list
> >>>>>>>>>Musclelists.musclecard.com
> >>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>>>
> >>>>>>>>_______________________________________________
> >>>>>>>>Muscle mailing list
> >>>>>>>>Musclelists.musclecard.com
> >>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>_______________________________________________
> >>>>>>>Muscle mailing list
> >>>>>>>Musclelists.musclecard.com
> >>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>
> >>>>>>_______________________________________________
> >>>>>>Muscle mailing list
> >>>>>>Musclelists.musclecard.com
> >>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>>>
> >>>>>
> >>>>>
> >>>>>_______________________________________________
> >>>>>Muscle mailing list
> >>>>>Musclelists.musclecard.com
> >>>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>
> >>>>_______________________________________________
> >>>>Muscle mailing list
> >>>>Musclelists.musclecard.com
> >>>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>>>
> >>>
> >>>
> >>>_______________________________________________
> >>>Muscle mailing list
> >>>Musclelists.musclecard.com
> >>>http://lists.drizzle.com/mailman/listinfo/muscle
> >>
> >>_______________________________________________
> >>Muscle mailing list
> >>Musclelists.musclecard.com
> >>http://lists.drizzle.com/mailman/listinfo/muscle
> >>
> >
> >
> > _______________________________________________
> > Muscle mailing list
> > Musclelists.musclecard.com
> > http://lists.drizzle.com/mailman/listinfo/muscle
>
> _______________________________________________
> Muscle mailing list
> Musclelists.musclecard.com
> http://lists.drizzle.com/mailman/listinfo/muscle
>

_______________________________________________
Muscle mailing list
Musclelists.musclecard.com
http://lists.drizzle.com/mailman/listinfo/muscle

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]