NEOHAPSIS - Peace of Mind Through Integrity and Insight

Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com

Neohapsis > Archives > MUSCLE Smartcard Development> 2006-q2

Re: [Muscle] Installing MuscleCard on JCOP41 v2.2

From: Karsten Ohme (widerstandt-online.de)
Date: Mon Apr 10 2006 - 08:15:32 CDT

Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Gambin Dejan wrote:
> Thanks Karsten...now I have cretaed the keypair successfully....if I can
> only know how to install the cert and try using PKCS#11...or at least
> how to debug it so I can see what is going wrong??

Insert other debug messages to the point where it fails. You must look
into the source and the PKCS#11 specification will help. Maybe somebody
out there has a working PKCS#11 module for this. Don' know.

Karsten
>
> dejan
>
>
>>-----Original Message-----
>>From: muscle-bounceslists.musclecard.com
>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of Karsten Ohme
>>Sent: Monday, April 10, 2006 2:56 PM
>>To: MUSCLE
>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>>
>>
>>Gambin Dejan wrote:
>>
>>>I am using a new applet. How do I "log in"? Do I need to run verify
>>>command before doing something like genkeys? resume rsa gives me:
>>
>>Use rsacrt instead of rsa. The JCOP only generates RSA CRT
>>keys. The resume command and the applet cannot differentiate this.
>>
>>Karsten
>>
>>>00CC
>>>
>>>RSA Capabilities Supported
>>>---------------------------------------------------------------
>>>
>>>Possible Key Lengths:
>>>
>>>512 Bit
>>>768 Bit
>>>1024 Bit X
>>>2048 Bit X
>>>512 Bit CRT
>>>768 Bit CRT
>>>1024 Bit CRT X
>>>2048 Bit CRT X
>>>
>>>Possible Key Generations:
>>>
>>>512 Bit
>>>768 Bit
>>>1024 Bit
>>>2048 Bit
>>>512 Bit CRT
>>>768 Bit CRT
>>>1024 Bit CRT X
>>>2048 Bit CRT X
>>>
>>>Possible Signature Algorithms:
>>>
>>>Signature with MD5 Hash and PKCS#1 Padding X
>>>Signature with MD5 Hash and RFC 2409 Padding
>>>Signature with RIPE MD-160 Hash and ISO 9796 Padding Signature with
>>>RIPE MD-160 Hash and PKCS#1 Padding Signature with SHA-1
>>
>>Hash and ISO
>>
>>>9796 Padding
>>>Signature with SHA-1 Hash and PKCS#1 Padding X
>>>Signature with SHA-1 Hash and RFC 2409 Padding
>>>Signature with SHA-1 Hash and PKCS#1-PSS Padding
>>>Signature with MD5 Hash and PKCS#1-PSS Padding
>>>Signature with RIPE MD-160 Hash and PKCS#1-PSS Padding
>>>
>>>Possible Cipher Algorithms:
>>>
>>>Cipher with ISO 14888 Padding
>>>Cipher with ISO 9796 Padding
>>>Cipher with No Padding X
>>>Cipher with PKCS#1 Padding X
>>>Cipher with PKCS#1-OAEP Padding
>>>GetCapabilities Successful
>>>
>>>I tried running "genkey rsa 1024" and "verify 1" before
>>
>>that (I have
>>
>>>setstatus for keygeneration to 0x0002, is it OK). I
>>
>>specified 6 and 7
>>
>>>for key numbers and 0x0002 for all ACLs. I get "Feature unsupported"
>>>(9C05) error....
>>>
>>>dejan
>>>
>>>
>>>
>>>>-----Original Message-----
>>>>From: muscle-bounceslists.musclecard.com
>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
>>
>>Karsten Ohme
>>
>>>>Sent: Monday, April 10, 2006 12:16 PM
>>>>To: MUSCLE
>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>>>>
>>>>
>>>>Gambin Dejan wrote:
>>>>
>>>>
>>>>>Well, I don't know where to go from here. MuscleTools gives me the
>>>>>following:
>>>>>
>>>>>1. resume lists many MSCxxx functions and all have "X" under
>>>>>"Supported". Does it mean "supported" or "not supported"?
>>>>
>>>>x is supported.
>>>>
>>>>
>>>>
>>>>>2. status gives me:
>>>>>
>>>>> Protocol Version: 1.30
>>>>
>>>>You have used the new applet? I thought you wanted to use the
>>>>old applet? I think 1.30 is the version for new applets.
>>
>>But it is OK.
>>
>>>>
>>>>> Software Version: 1.1
>>>>> Free Memory: 9998
>>>>> Total Memory: 10000
>>>>> PINs Used: 2
>>>>> Keys Used: 0
>>>>> Logged IDs: NONE
>>>>> How can create IDs:
>>>>> PIN #1
>>>>>How can create objects:
>>>>> PIN #1
>>>>> How can create keys:
>>>>> PIN #1
>>>>> Card Label: Not set.
>>>>> Serial Number: Not set.
>>>>>GetStatus Successful
>>>>>
>>>>>3. Genkeys rsa 1024 fails with "Feature unsupported" (I have set
>>>>>public key number to 0 and private to 1 don't know if this is
>>>>>correct!)
>>>>
>>>>If you have used the new applet, the first available key
>>>>number is 6, the numbers below are reserved for external
>>>>authentication, but if you have logged in with PIN#1
>>>>
>>>>How can create IDs:
>>>>
>>>>
>>>>> PIN #1
>>>>
>>>>you should also be able to use the lower key numbers.
>>>>
>>>>If you have used the new applet there are a lot of
>>>>compilation switches, you must specify want should be
>>>>enabled. See the README.
>>>>
>>>>Execute a resume rsa.
>>>>
>>>>
>>>>
>>>>>4. challenge works OK
>>>>>5. PIN functions work ok
>>>>>6. importkey - don't know which file format do I need?
>>>>
>>>>Key blobs. Documented in the Card Edge specification. Read it
>>>>or skip it. Someday trivial PEM oder DER encoded keys can
>>
>>be imported.
>>
>>>>Karsten
>>>>
>>>>
>>>>>...anyway, I am wondering if maybe the problem is not in pkcs#11?
>>>>>
>>>>>dejan
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>-----Original Message-----
>>>>>>From: muscle-bounceslists.musclecard.com
>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
>>>>
>>>>Karsten Ohme
>>>>
>>>>
>>>>>>Sent: Monday, April 10, 2006 11:27 AM
>>>>>>To: MUSCLE
>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>>>>>>
>>>>>>
>>>>>>Gambin Dejan wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Hi,
>>>>>>>
>>>>>>>After importing the cert to the software security device
>>>>>>
>>>>>>(it is doing
>>>>>>
>>>>>>
>>>>>>
>>>>>>>this by default, doesn't ask anything) I get this in PKCS11.log:
>>>>>>>
>>>>>>>10/04 11:11:35 +C_GetSlotList : start
>>>>>>>10/04 11:11:35 Active session list:
>>>>>>>10/04 11:11:35 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:35 Returning slot count: 1
>>>>>>>10/04 11:11:35 -C_GetSlotList : end RV(0x0)
>>>>>>>10/04 11:11:35 +C_GetSlotInfo : start
>>>>>>>10/04 11:11:35 Checking slot: 1
>>>>>>>10/04 11:11:35 Active session list:
>>>>>>>10/04 11:11:35 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:35 SlotInfo.flags: 7
>>>>>>>10/04 11:11:35 -C_GetSlotInfo : end RV(0x0)
>>>>>>>10/04 11:11:35 +C_GetSessionInfo : start
>>>>>>>10/04 11:11:35 Active session list:
>>>>>>>10/04 11:11:35 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:35 Session state: 0
>>>>>>>10/04 11:11:35 -C_GetSessionInfo : end RV(0x0)
>>>>>>>10/04 11:11:36 +C_GetSlotList : start
>>>>>>>10/04 11:11:36 Active session list:
>>>>>>>10/04 11:11:36 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:36 Returning slot count: 1
>>>>>>>10/04 11:11:36 -C_GetSlotList : end RV(0x0)
>>>>>>>10/04 11:11:36 +C_GetSlotInfo : start
>>>>>>>10/04 11:11:36 Checking slot: 1
>>>>>>>10/04 11:11:36 Active session list:
>>>>>>>10/04 11:11:36 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:36 SlotInfo.flags: 7
>>>>>>>10/04 11:11:36 -C_GetSlotInfo : end RV(0x0)
>>>>>>>10/04 11:11:36 +C_GetSessionInfo : start
>>>>>>>10/04 11:11:36 Active session list:
>>>>>>>10/04 11:11:36 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:36 Session state: 0
>>>>>>>10/04 11:11:36 -C_GetSessionInfo : end RV(0x0)
>>>>>>>10/04 11:11:37 +C_GetSlotList : start
>>>>>>>10/04 11:11:37 Active session list:
>>>>>>>10/04 11:11:37 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:37 Returning slot count: 1
>>>>>>>10/04 11:11:37 -C_GetSlotList : end RV(0x0)
>>>>>>>10/04 11:11:37 +C_GetSlotInfo : start
>>>>>>>10/04 11:11:37 Checking slot: 1
>>>>>>>10/04 11:11:37 Active session list:
>>>>>>>10/04 11:11:37 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:37 SlotInfo.flags: 7
>>>>>>>10/04 11:11:37 -C_GetSlotInfo : end RV(0x0)
>>>>>>>10/04 11:11:37 +C_GetSessionInfo : start
>>>>>>>10/04 11:11:37 Active session list:
>>>>>>>10/04 11:11:37 Session ID: 2AC4EB0
>>>>>>>10/04 11:11:37 Session state: 0
>>>>>>>10/04 11:11:37 -C_GetSessionInfo : end RV(0x0)
>>>>>>
>>>>>>Seems not to be much, no token, no reader detected. In
>>
>>times were it
>>
>>>>>>worked I got something like this in some situation:
>>>>>>
>>>>>>01/09 20:03:03 Slot 2 changed
>>>>>>01/09 20:03:03 +slot_DisconnectSlot : start
>>>>>>01/09 20:03:03 -slot_DisconnectSlot : end RV(0x0)
>>>>>>01/09 20:03:03 Attempting establish
>>>>>>01/09 20:03:03 Establish connection
>>>>>>01/09 20:03:03 Begin transaction: 2, rv=0
>>>>>>01/09 20:03:04 Token: MuscleCard Applet
>>>>>>01/09 20:03:04 Card supports RSA
>>>>>>01/09 20:03:04 Card supports RSA key gen
>>>>>>01/09 20:03:04 Card supports RSA NOPAD
>>>>>>01/09 20:03:04 Card supports RSA PKCS#1
>>>>>>01/09 20:03:04 Card supports DES
>>>>>>01/09 20:03:04 Card supports 3DES
>>>>>>01/09 20:03:04 Card supports AES
>>>>>>01/09 20:03:04 Attempting release
>>>>>>01/09 20:03:04 Releasing connection
>>
>>(slot_ReleaseConnection) 01/09
>>
>>>>>>20:03:04 Done releasing (slot_ReleaseConnection)
>>>>>>01/09 20:03:04 End transaction: 2, rv=0
>>>>>>01/09 20:03:04 SlotInfo.flags: 6
>>>>>>01/09 20:03:04 -C_GetSlotInfo : end RV(0x0)
>>>>>>01/09 20:03:04 +C_GetSlotInfo : start
>>>>>>
>>>>>>Karsten
>>>>>>
>>>>>>
>>>>>>
>>>>>>>regards, dejan
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>-----Original Message-----
>>>>>>>>From: muscle-bounceslists.musclecard.com
>>>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
>>>>>>
>>>>>>Karsten Ohme
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>Sent: Monday, April 10, 2006 10:49 AM
>>>>>>>>To: MUSCLE
>>>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>>>>>>>>
>>>>>>>>
>>>>>>>>Gambin Dejan wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>Hi,
>>>>>>>>>
>>>>>>>>>I have finally built MuscleTools on Windows. I had to
>>>>
>>>>use an older
>>>>
>>>>
>>>>>>>>>Bison version from cygwin. I have also successfully
>>>>
>>>>formatted the
>>>>
>>>>
>>>>>>>>>token using MuscleTools after installing the applet (developer
>>>>>>>>>version) in Eclipse.
>>>>>>>>>
>>>>>>>>>After that I have built PKCS#11. There were some problems
>>>>>>>>
>>>>>>>>that needed
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>thread_win32.c from pcsc/lite to be installed but it
>>>>
>>>>went ok after
>>>>
>>>>
>>>>>>>>>that. I have installed PKCS#11 module in Mozilla Firefox
>>>>>>>>
>>>>>>>>but I don't
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>know if/how can I install ther certificate onto the MuscleCard
>>>>>>>>>security device? I don't have "Log in" option enabled
>>
>>so Mozilla
>>
>>>>>>>>>imports my cert.p12 into software security
>>
>>device...does it mean
>>
>>>>>>>>>PKCS#11 is not working?
>>>>>>>>
>>>>>>>>Token is formated? Else enable debugging for PKCS#11.
>>>>
>>>>There should
>>>>
>>>>
>>>>>>>>be a file PKCS11.log under C:. Maybe it must be enabled with a
>>>>>>>>configuration file. Don't know anymore. See the sources for the
>>>>>>>>mentioned file how it is produced ...
>>>>>>>>
>>>>>>>>Karsten
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>thanks
>>>>>>>>>
>>>>>>>>>regards, dejan
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>-----Original Message-----
>>>>>>>>>>From: muscle-bounceslists.musclecard.com
>>>>>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
>>>>>>>>
>>>>>>>>Karsten Ohme
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>Sent: Monday, April 10, 2006 12:33 AM
>>>>>>>>>>To: MUSCLE
>>>>>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>Dejan Gambin wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>Thanks Karsten,
>>>>>>>>>>>
>>>>>>>>>>>I have realised my stupid error of not setting the path
>>>>>>
>>>>>>to Gnuwin32
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>bin folder so m4 wasn't found. Unfortunatelly now I am
>>>>
>>>>getting th
>>>>
>>>>
>>>>>>>>>>>error:
>>>>>>>>>>>
>>>>>>>>>>>parser.c
>>>>>>>>>>>../parser.c(1130) : error C2449: found '{' at file scope
>>>>>>
>>>>>>(missing
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>function heade
>>>>>>>>>>>r?)
>>>>>>>>>>>../parser.c(2138) : error C2059: syntax error : '}'
>>>>
>>>>NMAKE : fatal
>>>>
>>>>
>>>>>>>>>>>error U1077: 'cl.exe' : return code '0x2' Stop.
>>>>>>>>>>>
>>>>>>>>>>>I suppose Bison can be the problem...I am using the
>>>>
>>>>version from
>>>>
>>>>
>>>>>>>>>>>Gnuwin32, next I'll try to use cygwin like you proposed...
>>>>>>>>>>
>>>>>>>>>>Don't know. I have installed cygwin and bison. Try with both.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>Besides, you say PKCS#11 may not work with developer
>>>>>>
>>>>>>version. So it
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>will be better to use the stable versions of all the
>>>>>>
>>>>>>libraries and
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>applets? Do you think I can use the developer versions of
>>>>>>>>>>>libmusclecard, MCardPlugin (that I successfully built) and
>>>>>>>>>>
>>>>>>>>>>MuscleTool
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>with the old/stable applet? Or you are suggesting me
>>>>>>>>
>>>>>>>>something else?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>The API is different, so it will not work. Try the PKCS#11
>>>>>>>>>
>>>>>>>>>>from the website. Else you can use the development version
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>Makefiles but must exchange some files ...
>>>>>>>>>>
>>>>>>>>>>Karsten
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>Sorry to bother you :-((
>>>>>>>>>>>
>>>>>>>>>>>thanks very much
>>>>>>>>>>>
>>>>>>>>>>>regards, dejan
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>-----Original Message-----
>>>>>>>>>>>>From: muscle-bounceslists.musclecard.com
>>>>>>>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
>>>>>>>>>>
>>>>>>>>>>Karsten Ohme
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>Sent: Sunday, April 09, 2006 9:45 PM
>>>>>>>>>>>>To: MUSCLE
>>>>>>>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>Dejan Gambin wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>Hi Karsten,
>>>>>>>>>>>>>
>>>>>>>>>>>>>Thank you very much for clearifying the things. I am
>>>>>>>>>>>>
>>>>>>>>>>>>participating a
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>project where the new JCOP31 v2.2 card should be used. I
>>>>>>>>
>>>>>>>>have got a
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>sample of cards and the first thing I have to do is trying
>>>>>>>>>>>>
>>>>>>>>>>>>to enable
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>some PKCS#11 enabled applications to use the card just for
>>>>>>>>>>>>
>>>>>>>>>>>>testing. We
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>are in a process of buidling the PKCS#15 applet for this
>>>>>>>>>>>>
>>>>>>>>>>>>card (so it
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>can be used by OpenSC), but the working applet is not
>>>>>>>>
>>>>>>>>yet ready for
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>v2.2 (it is working on old JCOP31/JCOP20 cards). In the
>>>>>>>>
>>>>>>>>meantime I
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>would like to try using MuscleCard applet, libmusclecard,
>>>>>>>>>>>>
>>>>>>>>>>>>MCardPlugin
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>and PKCS#11 on this card and to write a
>>>>
>>>>documentation on how to
>>>>
>>>>
>>>>>>>>>>>>>install and use everything. I will be glad to share this
>>>>>>>>>>>>
>>>>>>>>>>>>document on
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>the list so maybe it could help people making everything
>>>>>>>>
>>>>>>>>working..
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>I don't know if it is better to use the stable
>>>>
>>>>version or the
>>>>
>>>>
>>>>>>>>>>>>>developer one. I have tried the following (remember this
>>>>>>>>
>>>>>>>>is all on
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>Windows!):
>>>>>>>>>>>>>
>>>>>>>>>>>>>I went to
>>
>>http://www.musclecard.com/musclecard/index.html. I
>>
>>>>>>>>>>>>>downloaded CFlexAccess32Loader.zip and took the CardEdge
>>>>>>>>
>>>>>>>>bin from
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>there. I have successfully installed this bin file onto
>>>>>>>>
>>>>>>>>the JCOP31
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>card using the modified GPShell examples (as you told me).
>>>>>>>>>>>>
>>>>>>>>>>>>After that
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>I wanted to get the latest stable libmusclecard library. I
>>>>>>>>>>>>
>>>>>>>>>>>>found the
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>only one available on CVS (version
>>>>>>>>>>>>>1.3.2) but unfortunatelly it has no documentation on how to
>>>>>>>>>>>>
>>>>>>>>>>>>build it on
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>Windows. The same is for muscleframework-1.1.5,
>>>>>>>>>>>>
>>>>>>>>>>>>MCardApplet-0.9.11 and
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>muscleTool 2.1.0.
>>>>>>>>>>>>>So it looked pretty difficult to me to install it on
>>>>>>>>>>>>
>>>>>>>>>>>>Windows and I went to
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>your development versions. They are all on one place, they
>>>>>>>>>>>>
>>>>>>>>>>>>all have the
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>Install.w32 so I thought it would be easier to install.
>>>>>>>>>>>>
>>>>>>>>>>>>Since this developer
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>version had no cap or bin applet file, I have successfully
>>>>>>>>>>>>
>>>>>>>>>>>>installed the
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>applet in Eclipse,
>>>>>>>>>>>>
>>>>>>>>>>>>OK, but there are xml build files for Ant. But the new
>>>>>>>>
>>>>>>>>version are
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>compatible with the old applet, so it should work
>>>>
>>>>with the old
>>>>
>>>>
>>>>>>>>>>>>version.
>>>>>>>>>>>>
>>>>>>>>>>>>The PKCS#11 module on the development page may not
>>>>>>
>>>>>>work(?). It is
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>not updated.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>and also libmusclecard and mscCardPlugin but I got
>>>>>>>>>>>>
>>>>>>>>>>>>unsupported errors
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>in muscletest. I supposed this was because of
>>>>>>>>>>>>
>>>>>>>>>>>>"nonpersonalized" card
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>so
>>>>>>>>>>>>
>>>>>>>>>>>>Can be the case.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>I tried building the latest developer MuscleTool using the
>>>>>>>>>>>>>Install.w32 documentation supplied. But running:
>>>>>>>>>>>>>
>>>>>>>>>>>>>nmake -f MuscleTools.mak VERSION2=
>>>>>>>>>>>>>PTHREADS_INC="C:\Mydocu~1\MyDown~1\PKI\pthreads\Pre-built.2
>>>>>>>>>>>>
>>>>>>>>>>>>\include"
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>PTHREADS_LIB="C:\MyDocu~1\MyDown~1\PKI\pthreads\Pre-bui
>>>>>>
>>>>>>lt.2\lib"
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>PTHREADS_NAME=pthreadVC2
>>>>>>>>
>>>>>>>>FLEX="C:\Progra~1\GnuWin32\bin\flex.exe"
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>FLEX_INC="C:\Progra~1\GnuWin32\include"
>>>>>>>>>>>>>PCSC_INC="C:\MyDocu~1\MyDown~1\PKI\libmusclecard\src\PC
>>>>>>
>>>>>>SC\win32"
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>BISON="C:\Progra~1\GnuWin32 \bin\bison.exe"
>>>>>>>>>>>>>MUSCLECARD_INC="C:\MyDocu~1\MyDown~1\PKI\libmusclecard\src"
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>MUSCLECARD_LIB="C:\MyDocu~1\MyDown~1\PKI\libmusclecard\win32
>>>>>>>>>>
>>>>>>>>>>\release"
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>>I got: C:\Progra~1\GnuWin32\bin\flex.exe
>>>>>>>>>>>>
>>>>>>>>>>>>-o../scanner.c ../scanner.l
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> C:\Progra~1\GnuWin32\bin\bison.exe -do ../parser.c
>>>>>>>>>>>>
>>>>>>>>>>>>../parser.y
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>C:\Progra~1\GnuWin32\bin\bison.exe: m4: No such file or
>>>>>>>>
>>>>>>>>directory
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>NMAKE : fatal error U1077:
>>>>>>>>
>>>>>>>>'C:\Progra~1\GnuWin32\bin\bison.exe' :
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>return code '0 x1' Stop.
>>>>>>>>>>>>>
>>>>>>>>>>>>>any help?
>>>>>>>>>>>>
>>>>>>>>>>>>Install the m4 macros for GnuWin32, maybe this
>>>>
>>>>package is named
>>>>
>>>>
>>>>>>>>>>>>autoconf or automake. Install all.
>>>>>>>>>>>>
>>>>>>>>>>>>Karsten
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>dejan
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>-----Original Message-----
>>>>>>>>>>>>>>From: muscle-bounceslists.musclecard.com
>>>>>>>>>>>>>>[mailto:muscle-bounceslists.musclecard.com] On Behalf Of
>>>>>>>>>>>>
>>>>>>>>>>>>Karsten Ohme
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>>Sent: Friday, April 07, 2006 7:25 PM
>>>>>>>>>>>>>>To: MUSCLE
>>>>>>>>>>>>>>Subject: Re: [Muscle] Installing MuscleCard on JCOP41 v2.2
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>Gambin Dejan wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>I would like to install musclecard applet onto the JCOP41
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>card and use
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>musclecard applications after that. Can someone tell me
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>which software
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>do I need to install, which versions,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>and where to get all this?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>All from here:
>>>>
>>>>http://www.musclecard.com/musclecard/index.html
>>>>
>>>>
>>>>>>>>>>>>>>The developer builds are really developer build, you
>>>>>>
>>>>>>can develop
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>them, improve, ... the base stuff works for me, but
>>>>
>>>>these are
>>>>
>>>>
>>>>>>>>>>>>>>developer builds.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>Download MCardApplet from
>>>>>>>>>>>>>>http://web.inf.tu-dresden.de/~ko189283/MuscleCard/
>>>>>>
>>>>>>and read the
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>README. Replace the src directory in MCardApplet with
>>>>>>
>>>>>>a stable
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>version, linked at
>>>>>>>>>>
>>>>>>>>>>http://www.musclecard.com/musclecard/index.html.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>>>There is a Ant build script for JCOP cards. This will
>>>>>>
>>>>>>produce a
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>binary to load.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>It is much easier to take a ready build binary
>>>>>>
>>>>>>contained in the
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>MuscleCardApplet loader.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>I was successfully installed the newest musclecard
>>>>>>
>>>>>>applet using
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>>Eclipse,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>You wanted to try out the latest, that means the
>>>>>>>>>>
>>>>>>>>>>development applet?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>>>If you want to do this and you do not have to expect that
>>>>>>>>>>
>>>>>>>>>>everything
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>>>works. It is not stable!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>but I don't know how to do it with GPShell...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>There is an example file to install an applet on a GP211
>>>>>>>>>>
>>>>>>>>>>card. Take
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>>>it. There should not be much difference. Look in
>>
>>the README.
>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>after that I wanted to
>>>>>>>>>>>>>>>install MuscleTools but again didn't know which
>>
>>version to
>>
>>>>>>>>>>>>>>>install.....I have downloaded 2.0.1 but couldn't
>>>>>>
>>>>>>install it on
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>>Windows...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>What means could not install?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>Your problem about the unsupported functions is
>>
>>probably the
>>
>>>>>>>>>>>>>>following: You want to use the development applet
>>>>>>
>>>>>>with a stable
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>>>>>>muscleTool version. There is a README or Install.w32 for
>>>>>>>>>>>>>>muscleTool, which explains how to use or disable the
>>>>>>>>
>>>>>>>>development
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>>version. If you want to use it, then you must also
>>>>
>>>>use all the
>>>>
>>>>
>>>>>>>>>>>>>>development version at
>>>>>>>>>>>>>>http://web.inf.tu-dresden.de/~ko189283/MuscleCard/ and
>>>>>>>>
>>>>>>>>maybe this
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>>>will not work, fix problems if you have any, but it is a
>>>>>>>>>>>>>>development version!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>Karsten
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Any help?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>thanks
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>regards, dejan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>>>>>Muscle mailing list
>>>>>>>>>>>>>>>Musclelists.musclecard.com
>>>>>>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>>>>Muscle mailing list
>>>>>>>>>>>>>>Musclelists.musclecard.com
>>>>>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>>>Muscle mailing list
>>>>>>>>>>>>>Musclelists.musclecard.com
>>>>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>>>>>
>>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>>Muscle mailing list
>>>>>>>>>>>>Musclelists.musclecard.com
>>>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>Muscle mailing list
>>>>>>>>>>>Musclelists.musclecard.com
>>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>>>
>>>>>>>>>>_______________________________________________
>>>>>>>>>>Muscle mailing list
>>>>>>>>>>Musclelists.musclecard.com
>>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>_______________________________________________
>>>>>>>>>Muscle mailing list
>>>>>>>>>Musclelists.musclecard.com
>>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>
>>>>>>>>_______________________________________________
>>>>>>>>Muscle mailing list
>>>>>>>>Musclelists.musclecard.com
>>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>_______________________________________________
>>>>>>>Muscle mailing list
>>>>>>>Musclelists.musclecard.com
>>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>
>>>>>>_______________________________________________
>>>>>>Muscle mailing list
>>>>>>Musclelists.musclecard.com
>>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>>>
>>>>>
>>>>>
>>>>>_______________________________________________
>>>>>Muscle mailing list
>>>>>Musclelists.musclecard.com
>>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>
>>>>_______________________________________________
>>>>Muscle mailing list
>>>>Musclelists.musclecard.com
>>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>>>
>>>
>>>
>>>_______________________________________________
>>>Muscle mailing list
>>>Musclelists.musclecard.com
>>>http://lists.drizzle.com/mailman/listinfo/muscle
>>
>>_______________________________________________
>>Muscle mailing list
>>Musclelists.musclecard.com
>>http://lists.drizzle.com/mailman/listinfo/muscle
>>
>
>
> _______________________________________________
> Muscle mailing list
> Musclelists.musclecard.com
> http://lists.drizzle.com/mailman/listinfo/muscle

_______________________________________________
Muscle mailing list
Musclelists.musclecard.com
http://lists.drizzle.com/mailman/listinfo/muscle

Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]