|
Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com |
From: IT Resource Center (support_feedback_at_us-support2-mail.external.hp.com)
Date: Sun Nov 17 2002 - 07:04:05 CST
HP Support Information Digests
===============================================================================
o IT Resource Center World Wide Web Service
---------------------------------------------------
If you subscribed through the IT Resource Center and would
like to be REMOVED from this mailing list, access the
IT Resource Center on the World Wide Web at:
Login using your IT Resource Center User ID and Password.
Then select Support Information Digests (located under
Maintenance and Support). You may then unsubscribe from the
appropriate digest.
To download a patch referenced below, access the
IT Resource Center on the World Wide Web at:
Login using your IT Resource Center User ID and Password.
Then select Individual Patches (under Maintenance and Support)
to access the patch. You may also download a patch via anonymous
ftp(1) from ftp.itrc.hp.com.
===============================================================================
Digest Name: weekly HP-UX series 800 10.X patch digest
Created: Sun Nov 17 6:05:02 EST 2002
Table of Contents:
Document ID Title
--------------- -----------
PHSS_27587 s700_800 10.20 OV OB4.10 patch - CC packet
PHSS_27585 s700_800 10.20 OV OB4.00 patch - MA packet
The documents are listed below.
-------------------------------------------------------------------------------
Document ID: PHSS_27587
Date Loaded: 20021112
Title: s700_800 10.20 OV OB4.10 patch - CC packet
Patch Name: PHSS_27587
Patch Description: s700_800 10.20 OV OB4.10 patch - CC packet
Creation Date: 02/11/08
Post Date: 02/11/12
Hardware Platforms - OS Releases:
s700: 10.20
s800: 10.20
Products:
OmniBackII A.04.10
Filesets:
OMNIBACK-II.OMNI-HPUX-P,A.04.10
OMNIBACK-II.OMNI-OTHUX-P,A.04.10
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_27587
Symptoms:
PHSS_27587:
Id = HSLco33238 SR:H555007372
Multiple messages:
"Memory copy mode activated"
appear in the session output during MS SQL backup
with the Fast Direct mode enabled.
Id = HSLco34581 SR:H555007993
"devbra" returns 'rewind on close' devices.
Id = HSLco35611 SR:H555008476
Restore GUI can not handle two separate Oracle7
database with the same SID. GUI does not display
all objects versions.
Id = HSLco36219 SR:H555008624
When viewing sessions in database context and then
switching context, GUI ends abnormally.
Id = HSLco36343 SR:H555008636
Statistics for DCBF directory are incorrect in GUI.
Id = HSLco36478 SR:H555008657
While attempting to restore an Informix Backup
GUI ends abnormally.
Id = HSLco36526 SR:B555014660
Sanconf does not distinguish between tape devices
having serial numbers longer than 10 digits.
Id = HSLco36751 SR:H555008700
Move client operation does not move the client from
one cell to another but returns the message that
selected client exists in all cells.
Id = HSLco36798 SR:H555008715
GUI does not respond when view is clicked in main menu.
Id = HSLco36983 SR:H555008752
Fields on notification page disappear after switching
contexts.
Id = HSLco36986 SR:H555008754
Report "Extended report on used media" gives wrong info
about used media in selected timeframe.
Id = HSLco36988 SR:H555008755
When saving a XP datalist or barlist created through
the GUI, the following message pops up:
"This backup will not start because the SureStore
Disk Array XP license is not available.".
Id = HSLco36998 SR:H555008757
When filesystem is chosen for restore error message
pops up:
"error: Error details unknown.".
Id = HSLco37094 SR:H555008779
Notifications script can be run from anywhere even
with ExternalScriptMode set to 1.
Id = HSLco37174 SR:H555008803
Menu item /Tools/Database Administration is grayed
out in MOM GUI.
Id = HSLco37359 SR:H555008849
OmniBack II GUI abnormally ends on exit.
Id = HSLco37939 SR:H555008927
While configuring OmniBack II reports using GUI only
datalists are listed (barlists are missing).
Id = JAGae12418 SR:8606245960
Backup GUI displays selection, which is inconsistent
with datalist.
Id = JAGae27939 SR:8606263614
GUI session restore picks the last version of file.
Id = JAGae36127 SR:8606271949
MS Exchange 2000 objects are not shown.
PHSS_26877:
Id = HSLco31458 SR:H555006839
When using "omnir -rawdisk", the following is reported:
"[Warning] From: RSM
<host> "" Time:<time>
Following trees from <host>: <Label> session <ID>
were not found in database:
ToSection=Section".
Id = HSLco33515 SR:H555007485
After using CLI command omnimm -chkfreemedia
the following messages are logged in the debug.log
file:
"06/13/01 12:00:01 OMNIMM.10542.0
["lib/cmn/obstr.c /main/17":187] A.04.00 b364
StrToUserSessionId: "0": not in correct format
06/13/01 12:00:01 OMNIMM.10542.0
["lib/cmn/obstr.c /main/17":428] A.04.00 b364
StrFromObjectName: "Default LTO": no host/mpoint
delimiter"
Id = HSLco33578 SR:H555007518
Description and Location fields in select media dialog
box do not allow wildcards.
Id = HSLco33579 SR:H555007519
When browsing pre-allocation media list only hexID and
label are displayed. Other properties are missing.
Id = HSLco33645 SR:H555007546
"Point in time restore" restore option of
Transaction log backup in OmniBack II MSSQL
integration is not limited.
Id = HSLco33767 SR:H555007591
GUI crashes during browsing SQL 7 restore objects.
Id = HSLco34046 SR:H555007697
When device different from original device is selected
for restore, device is not changed and original device
is used for restore.
Id = HSLco34166 SR:H555007748
OmniBack II SSEA integration option
"Keep Version available for Instant Restore" for
Continuous Access XP and Combined
(Continuous Access XP + Business Copy XP)
is not supported, but is selectable.
Id = HSLco34174 SR:H555007752
"omnicellinfo -dlobj" ends abnormally.
Id = HSLco34683 SR:H555008049
If xomni is started with -cde option, characters on
tabs in the results area are not readable.
Id = JAGad92807 SR:8606223711
The current link in the Info menu is labeled
'OmniBack II FAQ' and it points to:
http://ovweb3.external.hp.com/ovfaq
Id = NSMbb44613 SR:B555013242
The OmniBack II GUI startup performance is poor
on HP-UX systems.
Id = HSLco34610 SR:H555008004
When GUI does not get MSSQL instances properly and user
enters the instance manually by typing, GUI instead of
proceeding asks for instance configuration.
Id = HSLco34641 SR:H555008020
"Restore to another instance field" is missing in
SQL 2000 restore context.
Id = HSLco35458 SR:H555008431
MOM GUI does not display users.
Id = HSLco35714 SR:H555008510
SAP restore objects are not displayed.
Id = HSLco35716 SR:H555008511
Data protection and catalog protection date for same
object differs for one day.
Id = HSLco35943 SR:H555008559
After modifying OBII 3.5 Oracle8 barlist using the
4.x GUI, RMAN script gets corrupted.
PHSS_26341:
Id = HSLco31198 SR: H555006778
Restore of Oracle7 database to a different host
(backup host and target host are not the same)
fails with the following error message:
"grep: can't open
/etc/opt/omni/oracle/rcs/<Oracle_Sid>.rcs"
Id = HSLco31665 SR: H555006875
When files are selected for restore and restore is
started, RSM reports:
"Error starting VBDA <DATALIST_NAME> on <computer>:
Maximum number of files/directories specified
=> DA will not be started.
Try to specify less files/directories and
restart backup."
Id = HSLco31733 SR: H555006893
Additional dates added to periodic backup schedule
after 13 months.
Id = HSLco31949 SR: H555006942
OmniBack II A.04.10 GUI abnormally ends when trying to
connect to OmniBack II A.04.00 Cell Manager.
Id = HSLco32409 SR: H555007048
GUI shows incorrect number of SQL objects for the
system.
Id = JAGad95458 SR: 8606226389
Compress option for the SAP integration in GUI is
enabled.
Id = HSLco32637 SR:H555007125
Printing in OmniBack II 4.x HP-UX GUI does not work.
Id = HSLco32864 SR:H555007211
Linux clients can not be updated from GUI.
Id = HSLco32873 SR:H555007218
If you try to restore files in interval that does not
include full backup the following error appears:
"DB unknown error".
Id = HSLco33095 SR:H555007294
Device wizard text update is not working on HPUX 4.X
GUI.
Id = HSLco33471 SR:H555007472
Split pre-exec and post-exec scripts in the EMC
integration are grayed out.
Id = JAGae02797 SR:8606233574
Comments can not be added to RMAN script via OmniBack
if '#' is specified before comment.
Id = HSLco31357 SR:H555006818
GUI crashes during object messages check.
Id = HSLco31031 SR:H555006752
During client upgrade it is not possible to
automatically select all the hosts for the same
Installation Server.
Defect Description:
PHSS_27587:
Id = HSLco33238
MS SQL backup using Fast Direct mode results as
"proper backup", but there are too many messages.
Resolution:
Only one message of type:
"[Normal] From: BMA<hostname> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
Memory copy mode activated."
per Backup Media Agent (BMA) is displayed.
Id = HSLco34581
In case that "st_san_safe" kernel parameter is enabled,
system cannot work with 'rewind on close' devices.
So "devbra" is returning devices which are not usable.
Resolution:
"devbra" is changed in order to return
'non-rewind on close' devices.
Id = HSLco35611
GUI does not check on which host Oracle7 database is
backed up and all backup versions are appended to
the first one found.
Resolution:
Host matching and object version adding to list is
improved.
Id = HSLco36219
Problem occurs when there are a lot of sessions or
when there are a lot of tree nodes in scoping pane.
Resolution:
Tree control in scoping pane is dynamically collapsed
before context is switched.
Part of SSPUX410_034
Id = HSLco36343
GUI reports incorrect statistics for DCBF directory.
Resolution:
GUI is improved in order to report correct
statistics for DCBF directory.
Id = HSLco36478
Incorrect indirection operator is used.
Resolution:
Indirection operator is used correctly.
Id = HSLco36526
Devbra and sanconf are limited to 10 character serial
numbers only. When there are devices with 12 digit
SN detected, devbra truncates the last two digits.
As a result, several physical devices are then treated
as one and the same device.
Resolution:
Devbra is using all digits of the device SN to
distinguish between devices.
Part of SSPUX410_040.
Id = HSLco36751
List of clients residing in the destination cell
server is not updated.
Resolution:
List of clients residing in the destination cell
server is now properly updated.
Id = HSLco36798
After installation of SSPUX410_024 or SSPUX410_029,
GUI goes into infinite loop when view is clicked in
main menu.
Resolution:
Additional activation checking is added in users
context.
Id = HSLco36983
During second initialization of combo box an error
occurs while retrieving datalist and leaving the rest
of the fields uninitialized.
Resolution:
Fields on notification page do not disappear after
switching contexts.
Id = HSLco36986
OmniBack II does not properly create list of sessions
for used media in selected timeframe.
Resolution:
"Extended report on used media" report is removed from
reporting.
Id = HSLco36988
GUI never looks for the new 1TB XP license, but always
looks for the old XP standard license. The same is with
the new 1TB EMC license.
Resolution:
GUI also looks for the new 1TB EMC and 1TB XP licenses.
Id = HSLco36998
The cause for the error message is refreshing of media
tab. While refreshing it tries to retrieve object
versions of subfolders, which were not clicked, hence
not initialized.
Resolution:
GUI now searches only folders which have object
versions initialized.
Id = HSLco37094
Script can be run from anywhere because omnirpt does
not check the global options file.
Resolution:
Omnirpt was changed and now it checks the global
options file for ExternalScriptMode entry.
Id = HSLco37174
GUI expects "start backup" instead of "monitor" user
rights for starting Database context GUI.
Resolution:
GUI now checks "monitor" user rights for showing
/Tools/Database Administration menu item.
Id = HSLco37359
OmniBack II GUI abnormally ends on exit, when
there are two "Schedule" tabs opened at a time.
Resolution:
OmniBack II GUI ends normally.
Id = HSLco37939
Barlists are members of a group which is not displayed
under reporting group in GUI Reporting.
Resolution:
Barlists are moved to a group that is displayed in GUI.
Id = JAGae12418
GUI is not able to handle nested mount points.
When GUI receives excluded directory from datalist
file it assumes that the part of the string between
first and second slash represents mount point.
Besides this, mount point is shown in GUI as a
mountpoint and as directory.
Resolution:
GUI is aware of nested mountpoints.
Id = JAGae27939
Even though session selected for restore is not the
last one, GUI will pick the latest version of file
for restore.
Resolution:
Version selection mechanism is fixed.
Id = JAGae36127
"omnidb" options "-msese" and "-msexchange" do not show
MS Exchange 2000 objects.
Resolution:
New "omnidb -msese" option is implemented.
PHSS_26877:
Id = HSLco31458
Restore Session Manager in integration protocol is
changed and omnir is not updated correctly.
Resolution:
omnir is corrected.
Id = HSLco33515
After using CLI command omnimm -chkfreemedia
inappropriate messages are logged in the debug.log
file.
Resolution:
Inappropriate messages are no longer logged in the
debug.log file.
Id = HSLco33578
Description and Location fields in the Select Media
dialog box do not allow wildcards.
Resolution:
Description and Location fields in the Select Media
dialog box now support wildcards.
Id = HSLco33579
Message handler for device medium object does not
parse MS_GETTEXT message correctly. Therefore
pre-allocation list does not display all the data.
Resolution:
Message parsing in device medium object improved.
Id = HSLco33645
"Point in time restore" restore option of
Transaction log backup in OmniBack II MSSQL
integration is not limited.
Resolution:
"Point in time restore" restore option is limited by
the backups. The maximum time is limited by start of
backup session selected for restore. The minimum time
is limited by first previous full or differential
backup.
Id = HSLco33767
Insufficient amount of memory is allocated.
Resolution:
Enough memory is allocated.
Id = HSLco34046
Change device option is not working in host
restore mode.
Resolution:
Code is corrected.
Id = HSLco34166
OmniBack II SSEA integration option
"Keep Version available for Instant Restore" for
Continuous Access XP and Combined
(Continuous Access XP + Business Copy XP)
is not supported, but is selectable.
Resolution:
Option "Keep Version available for Instant Restore"
for other than Business Copy XP is grayed out.
Id = HSLco34174
The array that holds the objects of datalist is too
small.
Resolution:
The array is increased.
Id = HSLco34683
CDE text default color is white. OmniBack II has white
background so text is not readable.
Resolution:
Instead of button text we now use info text for tabs,
which is black.
Id = JAGad92807
This page is outdated. It must be labeled 'eCare
Support' and it must point to:
http://support.openview.hp.com/support.jsp?FromPROD
=ob_4_1
Resolution:
Label and links are fixed.
Id = NSMbb44613
At startup time all contexts/dlls are loaded.
On UX systems this needs ~2 seconds for each.
On top of that, ReadSubTree() is performed 3 times for
each context.
Resolution:
Usually administrator does not need all contexts from
the start. It is enough to first load database, monitor,
and backup. dlls for other contexts are only loaded when
the context is accessed during GUI session.
Id = HSLco34610
GUI does not check if instance is already configured.
Resolution:
GUI checks if instance is already configured.
Id = HSLco34641
"Restore to another instance" combo box for displaying
instances installed on SQL Server 2000 is missing.
Resolution:
"Restore to another instance" combo box is added.
Id = HSLco35458
MOM GUI is not aware of users and the result is "Not
Available" message in results area.
Resolution:
MOM GUI correctly displays users.
Part of SSPUX410_024.
Id = HSLco35714
If SAP host is selected in restore context, number of
objects is correct, but first object is displayed for
every object. Cause for the problem is definition of
variable mount.
Resolution:
Value of mount is not initialized but assigned.
Id = HSLco35716
Data protection value is improperly calculated.
Resolution:
Data protection calculation is improved.
Id = HSLco35943
OBII 4.x GUI reparsed RMAN script and incorrectly
recomposes it.
Resolution:
RMAN script parsing can be disabled by specifying the
following global variable:
NoGUIRMANScriptParsing=1
Part of SSPUX410_029.
PHSS_26341:
Id = HSLco31198
When restoring Oracle7 tablespace that is backed
up on one backup host to another target Oracle
client, the Restore Session Manager copies the rcs
file to the backup host instead of target host.
Resolution:
The rcs files are properly restored to the
target host.
Id = HSLco31665
Files which are grayed out in GUI are excluded with
option -exclude. Since the number of '-exclude' options
is limited, this can cause restore to fail.
Resolution:
Handling of excluded files is changed.
Id = HSLco31733
In next year the same date is not the same day in
week. Scheduled dates after one year are just copied,
so backups are scheduled on wrong days.
Resolution:
Days are correctly moved to next year.
Id = HSLco31949
Any attempt to establish connection to OmniBack II
A.04.00 Cell Manager from OmniBack II A.04.10 GUI,
when having no permissions to do so, results in
core dump of OmniBack II A.04.10 GUI.
Resolution:
Message "No permission" is displayed when one tries to
connect to a system where one does not have
sufficient permissions.
Part of SSPUX410_004.
Id = HSLco32409
GUI incorrectly determines which SQL objects has
already been added to SQL restore and which not.
Consequently GUI may display no objects at all,
though omnidb shows objects or the same object
several times.
Resolution:
GUI now correctly determines which SQL objects
have to be added to restore tree.
Id = JAGad95458
The Release Notes state that compression is not
supported for any of the database integrations.
Resolution:
The Compress option in GUI is disabled.
Id = HSLco32637
Printing is not possible due to missing windu xprinter
directory and *.drv files in OmniBack II installation.
Resolution:
Files are copied to the correct location.
Id = HSLco32864
GUI expects Windows Installation Server for Linux
client. However the right one is UNIX Installation
Server.
Resolution:
Checking is improved with new macro for GUI.
Id = HSLco32873
Selecting files for restore within interval that does
not include the full backup will trigger an error in
the list_full_rest_chain function.
Resolution:
The function marks an error and sends it to GUI, which
will show a message:
"You have chosen an interval which does not include
all the sessions needed to compose a full restore
chain. Please reconnect to the Cell Server".
Id = HSLco33095
When adding new device in GUI and device type is
changed to SCSI library in first step of wizard,
data format is not changed to interface type.
Resolution:
Window is invalidated and updated.
Id = HSLco33471
Split pre-exec and post-exec scripts working with the
EMC integration are disabled.
Resolution:
Split pre-exec and post-exec scripts working with the
EMC integration are enabled again.
Id = JAGae02797
OmniBack II uses '#' character for internal parsing.
Resolution:
Code is changed. New character <alt + 178> is used for
OmniBack II internal parsing.
Id = HSLco31357
In case that object has large number of messages,
GUI crashes during message check.
Resolution:
GUI is improved in order not to crash.
Id = HSLco31031
During client upgrade it is not possible to
automatically select all the hosts for the same
Installation Server.
Resolution:
GUI is improved.
SR:
H555008395 H555008764 H555008755 H555008476 H555008927
H555008657 H555008757 H555007993 8606280024 H555008849
H555008779 8606263614 8606245960 B555014660 8606271949
H555008700 H555006822 H555008803 H555007372 H555008624
H555008715 H555008752 H555008636 H555008664 H555008637
H555008754 H555007748 H555006839 H555008559 8606223711
H555007697 B555013242 H555008020 H555008004 H555008510
H555008511 H555008431 H555008049 H555007518 H555007752
H555007546 H555007519 H555007591 H555007485 H555006893
H555006875 H555007211 8606226389 H555006778 H555007125
H555007218 H555007048 H555006752 H555007472 8606233574
H555006942 H555007294 H555006818
Patch Files:
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/dec/alpha/osf1-4/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/gpl/i386/linux-60/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/ncr/i386/mp-ras/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sco/i386/sco_sv/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sco/i386/unixware/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sequent/i386/dynix/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sgi/mips/irix-62/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/siemens/r400/sinix/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sun/sparc/solaris-26/A.04.10/
packet.Z
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-1020/
A.04.10/packet.Z
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-11/A.04.10/
packet.Z
what(1) Output:
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/dec/alpha/osf1-4/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/gpl/i386/linux-60/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/ncr/i386/mp-ras/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sco/i386/sco_sv/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sco/i386/unixware/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sequent/i386/dynix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sgi/mips/irix-62/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/siemens/r400/sinix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sun/sparc/solaris-26/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-1020/
A.04.10/packet.Z:
None
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
cksum(1) Output:
1880671945 39882940 /opt/omni/databases/vendor/cc/hp/s800/
hp-ux-1020/A.04.10/packet.Z
3149290066 39892415 /opt/omni/databases/vendor/cc/hp/s800/
hp-ux-11/A.04.10/packet.Z
430574151 6790583 /opt/omni/databases/vendor/cc/dec/alpha/
osf1-4/A.04.10/packet.Z
717292087 5419907 /opt/omni/databases/vendor/cc/gpl/i386/
linux-60/A.04.10/packet.Z
2031485970 6104871 /opt/omni/databases/vendor/cc/ibm/rs6000/
aix-42/A.04.10/packet.Z
2740347538 5979362 /opt/omni/databases/vendor/cc/ncr/i386/
mp-ras/A.04.10/packet.Z
3788853221 5846916 /opt/omni/databases/vendor/cc/sco/i386/
sco_sv/A.04.10/packet.Z
3396621141 5736137 /opt/omni/databases/vendor/cc/sco/i386/
unixware/A.04.10/packet.Z
998290913 5914807 /opt/omni/databases/vendor/cc/sequent/
i386/dynix/A.04.10/packet.Z
18402320 7837119 /opt/omni/databases/vendor/cc/sgi/mips/
irix-62/A.04.10/packet.Z
1213124170 6684711 /opt/omni/databases/vendor/cc/siemens/
r400/sinix/A.04.10/packet.Z
2490619783 6073867 /opt/omni/databases/vendor/cc/sun/sparc/
solaris-26/A.04.10/packet.Z
70515078 214529 /opt/omni/databases/vendor/momgui/hp/s800/
hp-ux-1020/A.04.10/packet.Z
2028230976 214613 /opt/omni/databases/vendor/momgui/hp/s800/
hp-ux-11/A.04.10/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If any newer SSP for the Cell Console is installed
on your system, you must re-apply the SSP after
installing this Cell Console patch.
OMNIBACK_00065:
Release Date: Available
Id = HSLco33238 SR:H555007372
OMNIBACK_00065 is required for this defect fix.
PHSS_27602:
Release date: Late December
Id = JAGae12418 SR:8606245960
PHSS_27602 is required for this defect fix.
PHSS_27458:
Release Date: Available
Id = HSLco34581 SR:H555007993
PHSS_27458 is required for this defect fix.
Id = HSLco36526 SR:B555014660
PHSS_27458 is required for this defect fix.
PHSS_27454:
Release Date: Available
Id = HSLco32873 SR:H555007218
Fix is not working without PHSS_27454.
Id = HSLco33515 SR:H555007485
Fix is not working without PHSS_27454.
Id = HSLco37939 SR:H555008927
Fix is not working without PHSS_27454.
PHSS_27456:
Release Date: Available
Id = HSLco32873 SR:H555007218
Bad catalog access message is displayed without PHSS_27456.
Id = HSLco34641 SR:H555008020
Bad catalog access message is displayed without PHSS_27456.
Id = HSLco35716 SR:H555008511
Bad catalog access message is displayed without PHSS_27456.
Id = JAGad92807 SR:8606223711
Bad catalog access message is displayed without PHSS_27456.
Supersedes:
PHSS_26341 PHSS_26877
Equivalent Patches:
PHSS_27588:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Patch Package Size: 139330 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_27587
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHSS_27587.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHSS_27587. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHSS_27587.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_27587.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_27587:
NOTE!
This Patch has to be installed on the Installation
Server host.
The User Interface must be redistributed to the client
system(s) after the installation of the patch in order
to get the fixes into effect.
For distribution of the User Interface, refer to the
OmniBackII Installation guide.
Patch includes the following Site Specific Patches:
SSPUX410_004
SSPUX410_024
SSPUX410_029
SSPUX410_034
SSPUX410_040
-----End of Document ID: PHSS_27587------------------------------------------
Document ID: PHSS_27585
Date Loaded: 20021112
Title: s700_800 10.20 OV OB4.00 patch - MA packet
Patch Name: PHSS_27585
Patch Description: s700_800 10.20 OV OB4.00 patch - MA packet
Creation Date: 02/11/07
Post Date: 02/11/12
Hardware Platforms - OS Releases:
s700: 10.20
s800: 10.20
Products:
OmniBackII A.04.00
Filesets:
OMNIBACK-II.OMNI-ACS-P,A.04.00
OMNIBACK-II.OMNI-DAS-P,A.04.00
OMNIBACK-II.OMNI-HPUX-P,A.04.00
OMNIBACK-II.OMNI-OTHUX-P,A.04.00
OMNIBACK-II.OMNI-FXMA-P,A.04.00
OMNIBACK-II.OMNI-NDMP-P,A.04.00
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_27585
Symptoms:
PHSS_27585:
Id = HSLco30962 SR: H555006734
When testing the drive cleaning configuration
using OmniBack II dirty drive simulation method
on DDS4 autoloader DAT40x6i/e the tape
unload fails with the following error message:
"[12:5] Internal error in
("/src/ma/pol/polmax.c /main/r31_split/3":565)
=> process aborted
This is an unexpected condition and is likely
due to a combination of circumstances involving
both this product and the operating system.
Report this error to your post-sales OmniBack II
Support Representative."
Id = HSLco34581 SR: H555007993
devbra is not working properly with devices in
environments where "st_san_safe" kernel parameter
is enabled.
Id = HSLco34684 SR: H555008050
Backup on LTO device on AIX platform fails with error:
"Cannot close after write problem. ([5] There is an
input or output error.)"
Id = HSLco34910 SR: H555008179
New inquiry strings are needed for Compaq devices.
Id = HSLco35178 SR: H555008328
Backup fails with error:
"[90:135] Can not eject medium. ([5] I/O error)"
Id = HSLco35450 SR: H555008428
Auto configuration of Overland Data Neo Series
LXN2000 and Neo Series LXN4000 with Quantum
SDLT220 tape drives does not work.
Id = HSLco35670 SR: H555008496
OmniBack II displays incorrect message in Graphical
User Interface (GUI) when Medium header check
verification is performed:
"Medium verification completed, 0 errors found"
Id = HSLco36329 SR: H555008634
OmniBack II does not unload tape at the end of the
backup.
Id = HSLco35925 SR: H555008555
Backup to multihost device fails in case that
reconnect option is used.
Id = HSLco36147 SR: H555008610
When during the backup end of tape is reached BMA
ends abnormally.
Id = HSLco36472 SR: H555008655
Backup to file device fails with error:
"[Major] From: BMA<host_name> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
[90:51] /FileDevice
Cannot write to device ([27] File too large)"
Id = HSLco36901 SR: H555008728
Backup to direct access media fails with error:
"Cannot write to device
([6] No such device or address)"
Id = HSLco36960 SR: H555008747
Backup to 9840 device fails with error:
"Invalid physical device type => aborting."
Id = JAGae28035 SR: 8606263710
Backup to tape drive fails if cleaning tape is loaded.
PHSS_26875:
Id = HSLco32416 SR:H555007051
During backup following messages are reported:
"[Normal] From: BSM<host> "<datalist>" Time:<time>
[61:1011] Received reconnect request from
BMA<host> "file".
[Normal] From: BSM<host> "<datalist>" Time:<time>
BMA<host> "file" reconnected successfully.".
Id = HSLco33017 SR:H555007269
Library robotic mechanism is not released after tape
eject.
Id = HSLco33264 SR:H555007381
After failed backup session due to an I/O drive status
error, important information about the error in
debug.log file is missing.
Id = HSLco33563 SR:H555007513
Medium verification error is reported after
successfully completed backup:
"Medium verification completed, 1 errors found".
Id = HSLco33982 SR:H555007663
ACSLS query fails for STK 9940 media.
Id = HSLco34050 SR:H555007700
Backup fails with an error:
"[Critical] From: BMA<host> "<device>" Time:<time>
[90:30] SM/MA protocol error => aborting".
Id = HSLco34266 SR:H555007798
The earlier patch PHSS_26203 had introduced behavior
that can cause OmniBack II to abort if non-OmniBack II
tapes are detected. When this behavior occurs, messages
similar to the following will be displayed:
"[Warning] From: BSM<host> "<datalist>" Time:<time>
"tar" medium in device "<drive>".
The medium will not be used for backup.
[Minor] From: BMA<host> "<drive>" Time:<time>
[90:190] Invalid format version of OmniBack II
medium.
[Normal] From: BMA<host> "<drive>" Time:<time>
ABORTED Media Agent "<drive>"
[Critical] From: BSM<host> "<datalist>" Time:<time>
None of the Disk Agents completed successfully.
Session has failed."
Id = HSLco34139 SR:H555007739
After OmniBack II detects dirty drive and loads a
cleaning tape, option for medium header check aborts
the backup session.
PHSS_26203:
Id = HSLco30584 SR: H555006666
Omniback does not check if the medium is corrupted
at the end of the backup.
Id = HSLco30657 SR: H555006675
Some GRAU libraries cannot be properly configured
with Omniback 4.00.
Id = HSLco31274 SR: H555006790
DAS Media Agent cannot handle more than 15 drives.
Id = HSLco31293 SR: H555006798
Querying GRAU libraries hangs.
Id = HSLco31403 SR: H555006826
Tape is not marked poor after an append fails.
Id = HSLco31696 SR: H555006885
ACS Media Agent does not recognize LTO drives.
Id = HSLco30326 SR: H555006608
OmniBackII A.04.00 does not support HP VS80 and
Benchmark VS640 libraries.
PHSS_24980:
Id = HSLco27797 SR: H555005766
TapeAnalyser fails to work with Ultrium 1-SCSI drive.
Id = HSLco27834 SR: H555005787
NULL device capacity is limited to 4 GB.
Id = HSLco27870 SR: H555005799
When restoring a backup that spans over two media,
session fails with the following error:
"Invalid position specified. (Invalid seek
position.)".
Id = NSMex04534 SR: H555006003
Configuration of an Ultrium device on Solaris system
fails.
Id = HSLco27114 SR: H555005592
Cleaning signal is not detected.
Id = NSMbb42922 SR: B555012031
Backup fails with "SM/MA protocol error" mesage.
Id = NSMex04530 SR: H555006362
Media import sometimes fails due to I/O errors.
Defect Description:
PHSS_27585:
Id = HSLco30962
When a device unloads automatically, OmniBack II
tries to unload tape but fails since it is already
unloaded.
Resolution:
New environment variable OB2NOEJECTCLEANINGTAPE which
has to be set to 1 in omnirc file, was implemented in
order to prevent OmniBack II from unloading the
cleaning tape.
Id = HSLco34581
Enabled "st_san_safe" parameter causes incorrect
system handling for the devices with "rewind on close"
implemented. This causes devbra to return unusable
devices.
Resolution:
devbra is adapted in order to work properly when
"st_san_safe" kernel parameter is enabled.
Id = HSLco34684
Media Agent on AIX platform does not handle "End
of Medium" correctly for LTO devices.
Resolution:
"End of Medium" handling is improved for LTO devices
on AIX platform.
Id = HSLco34910
New inquiry strings are needed for Compaq devices.
Resolution:
New inquiry strings are added for Compaq devices.
Id = HSLco35178
Sometimes it is possible that eject operation fails
after the medium header verification.
Resolution:
Additional medium rewind operation is added before the
offline operation.
Id = HSLco35450
Auto configuration of Overland Data Neo Series
LXN2000 and Neo Series LXN4000with Quantum
SDLT220 tape drives do not work because of
inquiry strings missing.
Resolution:
Inquiry strings are added for auto configuration.
Id = HSLco35670
Message is implying that medium verification has been
done although only the medium header sanity check has
been performed.
Resolution:
Message is changed to:
"Medium header verification completed".
Id = HSLco36329
If during the backup connection between BMA and UMA
is broken and no IPC error is reported, BMA terminates
when it fails to instruct UMA to unload the tape.
Resolution:
New instance of UMA is started.
Id = HSLco35925
Media Agent protocol is incorrect for the devices
with multi-host connection.
Resolution:
Media Agent protocol is improved for the devices using
multi-host connections.
Part of SSPUX400_044.
Id = HSLco36147
Solaris Media Agent is not capable of handling SCSI
sense information bigger than 144 bytes.
Problem typically occurs in combination with certain
types of SAN FC switches/drivers.
Resolution:
Buffer receiving SCSI sense information is increased.
Id = HSLco36472
Media Agent is not able to write beyond 2GB limitation
on file devices.
Resolution:
The 2Gb limitation on file devices is increased.
Part of SSPUX400_047.
Id = HSLco36901
In case that backup to direct access devices contains
large number of small files, it is possible that
catalog size is bigger than space available on medium.
Because of this backup fails to write complete catalog
to the medium.
Resolution:
Calculation of space needed for catalog is improved in
order not to exceed available space.
Id = HSLco36960
OmniBack II does not work correctly with 9840 device
which product ID starts with "T9840".
Resolution:
Media Agent is improved in order to support 9840
devices which product ID starts with "T9840".
Id = JAGae28035
Automatic cleaning does not work if library does not
have barcode support.
Resolution:
New OmniBack II environment variable is added:
OB2CLNSLOT. Variable has to be set on Media Agent host
and has to contain number of Cleaning slot configured
for the library.
PHSS_26875:
Id = HSLco32416
Due to incorrectly set timeout it is possible that
reconnect occurs at beginning of backup if reconnect
option is used and OB2PORTRANGE environment variable
is set.
Resolution:
Timeout is set to correct value.
Id = HSLco33017
When split library in SAN environment is assigned to
2 systems and "omnimm -eject" is run on host B, host A
can no longer access the changer.
Resolution:
Library robotic mechanism is released after tape
eject.
Id = HSLco33264
Not all information is written to the debug.log after
I/O drive status error occurs.
Resolution:
Information is added to the debug.log file.
Id = HSLco33563
With OmniBack II A.04.00 release verification of DA
block part is introduced. In case that data length for
the data record is "0", verify reports an error.
Resolution:
Verify is changed in order to ignore "0" data length
for data record, because this does not influence data
restore.
Part of SSPUX400_029.
Id = HSLco33982
In case that STK 9940 drives are configured as T9840,
query does not work correctly because OB2 expects that
those drives are configured as type 3590.
Resolution:
Configuration for STK 9940 is changed in order to be
recognized as T9840 media type.
Id = HSLco34050
In case that reconnect option is used for backup, it
is possible that the Media Agent fails due to a
protocol error.
Resolution:
The protocol between Session Manager and Media Agent
is changed in order not to acknowledge normal
formatted messages.
Complete functionality of this fix will be available
when Cell Server patch PHSS_26209/PHSS_26210 is
installed - or successors of it.
Part of SSPUX400_031.
Id = HSLco34266
If 'InitOnLoosePolicy' is set to 0 and foreign tape
is loaded OmniBack II aborts backup session instead
of issuing a mount request.
When loading a tape medium header check is run. If the
medium is foreign or blank OmniBack II aborts backup
session.
Resolution:
If loaded tape is foreign or blank OmniBack II does not
check medium header when closing device.
Part of SSPUX400_033.
Id = HSLco34139
Header verification can not handle a dirty drive
situation.
Resolution:
If OmniBack II detects cleaning tape medium header is
not checked before unloading.
PHSS_26203:
Id = HSLco30584 SR: H555006666
Medium header verification is not implemeted.
Resolution:
Environment variable OB2DISABLEHEADERCHECK is
introduced.
Medium header is checked by default. Setting the
variable to 1 in /opt/omni/.omnirc file turns the
functionality off.
Part of SSPUX400_012 and SSPUX400_020.
Id = HSLco30657 SR: H555006675
Omniback 4.00 does not support LTO drives on GRAU
libraries.
Resolution:
Omniback 4.00 supports LTO drives in GRAU libraries.
Id = HSLco31274 SR: H555006790
DAS Media Agent is checking incorrect environment
variable.
Resolution:
Setting environment variable OB2DASDRIVESTATUS2 to 1
in the /opt/omni/omnirc file, next to OB2DASDRIVESTATUS
makes usage of more than 15 drives possible.
Part of SSPUX400_015.
Id = HSLco31293 SR: H555006798
Query operation hangs when performed on GRAU
libraries with more than 1000 tapes.
Resolution:
Query operation can handle more than 1000 tapes
within GRAU library.
Id = HSLco31403 SR: H555006826
If append fails during positioning, the tape is not
marked poor.
Resolution:
Error handling is improved.
Part of SSPUX400_017.
Id = HSLco31696 SR: H555006885
LTO drives are not supported with Omniback ACS
integration.
Resolution:
Omniback ACS integration supports LTO drives.
Id = HSLco30326
OmniBackII A.04.00 does not support HP VS80 and
Benchmark VS640 libraries.
Resolution:
OmniBackII A.04.00 supports HP VS80 and Benchmark VS640
libraries on HP-UX, Linux and Sun Solairs systems.
PHSS_24980:
Id = HSLco27797
TapeAnalyser does not recognize Ultrium 1-SCSI drive.
Resolution:
TapeAnalyser recognizes Ultrium 1-SCSI drive.
Id = HSLco27834
Checking for medium size includes NULL device as well.
Resolution:
NULL device is removed from size checking.
Id = HSLco27870
Restore fails because of nonexisting error reported.
Resolution:
Backup sessions that are span over two or more media
are properly restored.
Id = NSMex04534
Omniback does not recognize Ultrium devices on
Solaris systems.
Resolution:
Ultrium devices are properly configured on Solaris
systems.
Please see Special Installation Instructions.
Id = HSLco27114
Cleaning signal is incorrectly intercepted because of
two REQUEST SENSE.
Resolution:
REQUEST SENSE is reduced from two to one.
Id = NSMbb42922
Media Agent does not handle messages properly
in cases when reconnect is needed.
Resolution:
Media Agent handles reconnect messages properly.
Id = NSMex04530
Media import uses a lot of search operations in
order to achieve better performance. In case of
bad quality of drives or tapes, it sometimes fails
with an I/O error.
Resolution:
New OB2 environment variable is introduced:
OB2NOSEEKIMPORT.
If this variable is set to 1, Media Agent will read
through the complete tape and it will not use any
search operations.
This option reduces the chances of experiencing
I/O errors during media import, but its performance
is 3-4 times slower.
If OB2NOSEEKIMPORT is set and the tape contains
the "OB-crc" field, not only the tape is verified but
also the "OB-crc". Since a copied tape (omnimcopy)
will contain "OB-crc" field as well if the source tape
did contain "OB-crc" fields, importing such a tape
will also be "OB-crc" checked.
SR:
H555008728 H555008179 H555008747 H555008496 H555007993
H555008050 H555008421 H555008610 8606263710 H555006734
H555008634 H555008328 H555008428 H555008555 H555008655
H555007739 H555007051 H555007700 H555007798 H555007513
H555007381 H555007372 H555007663 H555007269 H555006885
H555006608 H555006826 H555006798 H555006790 H555006675
H555006666 H555006362 B555012031 H555006003 H555005787
H555005592 H555005799 H555005766
Patch Files:
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.00/
packet.Z
/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.00/
packet.Z
/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.00/
packet.Z
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
A.04.00/packet.Z
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.00/
packet.Z
/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.00/
packet.Z
/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.00/
packet.Z
/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.00/
packet.Z
/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.00/
packet.Z
/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.00/
packet.Z
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.00/
packet.Z
what(1) Output:
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
A.04.00/packet.Z:
None
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
cksum(1) Output:
3212397690 3004792 /opt/omni/databases/vendor/acs/hp/s800/
hp-ux-1020/A.04.00/packet.Z
3680646896 3008528 /opt/omni/databases/vendor/acs/hp/s800/
hp-ux-11/A.04.00/packet.Z
3210717576 2602429 /opt/omni/databases/vendor/acs/ibm/
rs6000/aix-42/A.04.00/packet.Z
1768079420 2960877 /opt/omni/databases/vendor/acs/sun/sparc/
solaris-26/A.04.00/packet.Z
62467998 2561747 /opt/omni/databases/vendor/das/hp/s800/
hp-ux-1020/A.04.00/packet.Z
1193624817 2564719 /opt/omni/databases/vendor/das/hp/s800/
hp-ux-11/A.04.00/packet.Z
1233621330 2462489 /opt/omni/databases/vendor/das/ibm/
rs6000/aix-42/A.04.00/packet.Z
1232929803 2839201 /opt/omni/databases/vendor/fxma/hp/s800/
hp-ux-1020/A.04.00/packet.Z
346054808 2841331 /opt/omni/databases/vendor/fxma/hp/s800/
hp-ux-11/A.04.00/packet.Z
2358338948 2535299 /opt/omni/databases/vendor/fxma/sun/
sparc/solaris-26/A.04.00/packet.Z
3939082716 2448743 /opt/omni/databases/vendor/ma/hp/s800/
hp-ux-1020/A.04.00/packet.Z
4166793752 2452771 /opt/omni/databases/vendor/ma/hp/s800/
hp-ux-11/A.04.00/packet.Z
2140548586 2012401 /opt/omni/databases/vendor/ma/gpl/i386/
linux-60/A.04.00/packet.Z
4104798848 2062701 /opt/omni/databases/vendor/ma/ibm/rs6000/
aix-42/A.04.00/packet.Z
56637848 1848841 /opt/omni/databases/vendor/ma/sco/i386/
sco_sv/A.04.00/packet.Z
3543043599 2120965 /opt/omni/databases/vendor/ma/sequent/
i386/dynix/A.04.00/packet.Z
3974555029 2368799 /opt/omni/databases/vendor/ma/siemens/
r400/sinix/A.04.00/packet.Z
337966777 2372530 /opt/omni/databases/vendor/ma/sun/sparc/
solaris-26/A.04.00/packet.Z
134659655 2582087 /opt/omni/databases/vendor/ndmp/hp/s800/
hp-ux-1020/A.04.00/packet.Z
3400447398 2588221 /opt/omni/databases/vendor/ndmp/hp/s800/
hp-ux-11/A.04.00/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If any newer SSP for the Media Agent is installed
on your system, you must re-apply the SSP after
installing this Media Agent patch.
If the Cell Server is running on HP-UX, then the
Cell Server patch PHSS_27460/PHSS_27461 for HP-UX
must be installed before this Media Agent patch.
If this is not done, the connection between Media
Agents and Cell Server will no longer work.
In a mixed environment, if the Cell Server is running
on Windows NT/2000, then Cell Server patch
OMNIBACK_00071 must be installed at the same time.
PHSS_27600:
Release Date: Early December 2002
Id = HSLco34581 SR: H555007993
PHSS_27600 is required for this defect fix.
PHSS_27460:
Release Date: Available
Id = HSLco34050 SR: H555007700
PHSS_27460 is required for this defect fix.
Supersedes:
PHSS_24980 PHSS_26203 PHSS_26875
Equivalent Patches:
PHSS_27586:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Patch Package Size: 49150 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_27585
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHSS_27585.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHSS_27585. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHSS_27585.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_27585.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_27585:
NOTE!
This Patch has to be installed on the Installation
Server host.
The OB2 Media Agent must be redistributed to the Media
Agent client system(s) after the installation of the patch
in order to get the fixes into effect.
For distribution of the Media Agent, refer to the
OmniBackII Installation guide.
PHSS_26875/PHSS_26876:
NOTE!
Configuration for "st.conf" file for connecting of
LTO Ultrium, Benchmark DLT1 and SuperDLT:
tape-config-list=
"HP Ultrium 1-SCSI", "HP Ultrium", "ULTRIUM",
"BNCHMARKDLT1", "Benchmark DLT1", "DLT1",
"QUANTUM SuperDLT1", "QUANTUM SuperDLT", "SDLT";
ULTRIUM = 1,0x3b,0,0xd639,4,0x00,0x00,0x00,0x40,3;
DLT1 = 1,0x3a,0,0x8639,4,0x40,0x86,0x87,0x89,3;
SDLT = 1,0x79,0,0x8639,4,0x90,0x91,0x90,0x91,3;
For ULTRIUM number "0x3b" can be replaced with "0x7a".
For Benchmark DLT1 number "0x3a" can be replaced with
"0x38" or "0x77".
The latest st (scsi tape) driver patch for Solaris must
be installed on the system:
Solaris 6 Patch-ID# 105847-09 or later
Solaris 7 Patch-ID# 107460-10 or later
Solaris 8 Patch-ID# 108725-05 or later
Patch includes the following Site Specific Patches:
SSPUX400_005
SSPUX400_012
SSPUX400_015
SSPUX400_017
SSPUX400_020
SSPUX400_029
SSPUX400_031
SSPUX400_033
SSPUX400_044
SSPUX400_047
-----End of Document ID: PHSS_27585------------------------------------------
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]