|
Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com |
HP-UX series 800 11.X patch digest
From: IT Resource Center (support_feedback
us-support2-mail.external.hp.com)
Date: Sun Mar 09 2003 - 21:30:03 CST
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
HP Support Information Digests
===============================================================================
o IT Resource Center World Wide Web Service
---------------------------------------------------
If you subscribed through the IT Resource Center and would
like to be REMOVED from this mailing list, access the
IT Resource Center on the World Wide Web at:
http://support.itrc.hp.com/
Login using your IT Resource Center User ID and Password.
Then select Support Information Digests (located under
Maintenance and Support). You may then unsubscribe from the
appropriate digest.
To download a patch referenced below, access the
IT Resource Center on the World Wide Web at:
http://support.itrc.hp.com/
Login using your IT Resource Center User ID and Password.
Then select Individual Patches (under Maintenance and Support)
to access the patch. You may also download a patch via anonymous
ftp(1) from ftp.itrc.hp.com.
===============================================================================
Digest Name: weekly HP-UX series 800 11.X patch digest
Created: Sun Mar 9 6:05:18 EST 2003
Table of Contents:
Document ID Title
--------------- -----------
PHSS_28824 s700_800 11.X OV SIP3.1 alarms in chronological order
PHSS_28768 s700_800 11.X OV SIP3.1 SIP3.1 aggregate patch
PHSS_28577 s700_800 11.X OV OB4.00 patch - DA packet
PHSS_28575 s700_800 11.X OV OB4.00 patch - CC packet
PHSS_28573 s700_800 11.X OV OB4.00 patch - CORE packet
PHSS_26675 s700_800 11.X Cluster Object Manager A.01.03.01
PHKL_28720 s700_800 11.22 MCA patch
PHKL_28566 s700_800 11.22 SCSI IO Subsystem Cumulative Patch
PHKL_28475 s700_800 11.11 vPars panic; Syscall cumulative
PHKL_28474 s700_800 11.11 signal cumulative patch
PHCO_28597 s700_800 11.22 iconv cumulative patch
PHSS_28332 s700_800 11.X OV OB4.10 patch - CC packet
PHCO_28316 s700_800 11.00 rc scripts patch
PHSS_28705 s700_800 11.X OV NNM6.2 Intermediate Patch, Feb 2003
PHKL_28670 s700_800 11.22 Memory pressure with JFS3.3
PHSS_28592 s700_800 11.X OpenMail B.07.00 March 03 Periodic Patch
PHSS_28590 s700_800 11.X OpenMail B.06.00 March 03 Periodic Patch
PHCO_28414 s700_800 11.11 pax(1) cumulative patch
PHCO_28007 s700_800 11.11 pwgrd(1M) cumulative patch
PHSS_28201 s700_800 11.X OV ITO7.1X JavaGUI client A.07.12
PHSS_28305 s700_800 11.22 libcl compatibility libraries
PHSS_28336 s700_800 11.X OV OB4.10 patch - DA packet
PHSS_28340 s700_800 11.X OV DP5.00 patch - CS packet
PHSS_27991 s700_800 11.X Cluster Object Manager B.01.04.01
The documents are listed below.
-------------------------------------------------------------------------------
Document ID: PHSS_28824
Date Loaded: 20030307
Title: s700_800 11.X OV SIP3.1 alarms in chronological order
Patch Name: PHSS_28824
Patch Description: s700_800 11.X OV SIP3.1 alarms in chronological order
Creation Date: 03/03/05
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.00 11.11
s800: 11.00 11.11
Products:
OpenView Service Information Portal 3.1
Filesets:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_28824
Symptoms:
PHSS_28824:
In any alarm group, if customer configures the alarms
module to have more alarms than default, then the alarms
no longer appear in the correct chronological order.
Defect Description:
PHSS_28824:
Due to a thread synchronization problem, the portal
sometimes requests alarms from ovalarmsrv in pages of 0
size. When this occurs NNM sends back alarms in pages of
size 100 if it has more than 100 alarms for the category
requested. Due to the difference in the number of alarms
expected and the number of alarms received, the portal
logic mixes up the chronological order in which alarms are
receeived.
Resolution:
The thread synchronization problem has been fixed. Also
the logic for sorting the alarms has been changed to take
care of the case where more than the expected number of
alarms are received.
Enhancement:
No
SR:
8606277319
Patch Files:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP:
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/alarms/NmAlarmCommEvtR.class
what(1) Output:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP:
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/alarms/NmAlarmCommEvtR.class:
None
cksum(1) Output:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP:
3668739155 21342 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/alarms/
NmAlarmCommEvtR.class
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes: None
Equivalent Patches:
OVSIPSOL_00016:
sparcSOL: 2.6 2.7 2.8
OVSIPNT_00015:
intelWIN2000: 1.00
Patch Package Size: 50 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28824
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_28824.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_28824. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_28824.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHSS_28824.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28824.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
========================================================
BEFORE LOADING THIS PATCH...
- Stop the Tomcat server.
- If you want to reinstall SIP, then you will have to
remove the patch. Once the re-install is over you
can apply the patch again.
NOTE : Tomcat is not started after the patch is loaded
You will need to manually start it.
Also, in order to keep a history of the patches
installed on your system the post-install script
will attempt to copy this <patch_name>.text file
to /opt/OV/SIP/patches. Please make
sure this file is in /tmp before installation.
========================================================
-----End of Document ID: PHSS_28824------------------------------------------
Document ID: PHSS_28768
Date Loaded: 20030307
Title: s700_800 11.X OV SIP3.1 SIP3.1 aggregate patch
Patch Name: PHSS_28768
Patch Description: s700_800 11.X OV SIP3.1 SIP3.1 aggregate patch
Creation Date: 03/03/04
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.00 11.11
s800: 11.00 11.11
Products:
OpenView Service Information Portal 3.1
Filesets:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_28768
Symptoms:
PHSS_28768:
1) SIPConfig does not recognize previously configured
OVO/UX stations
2) Bookmark module does not allow URLs greater than 60
characters
3) I18N: OVO Messages with localized
Application/MessageGroup/Object are not filtered properly
4) OVO/UX: filtering by Node name does not work
properly, throws exception
5) OVO/W: newlines are stripped from message text and/or
annotations
6) many extraneous NullPointerExceptions seen in log
file when tracing is enabled
Defect Description:
PHSS_28768:
1) ovoConfig.dtd is missing "unix" as default platform
2) too restrictive default value
3) data is not always converted to UTF-8
4) invalid column name used in query
5) newlines stripped from data during retrieval
6) resources checked for null before referenced
Resolution:
source code changed to address problems
Enhancement:
No
SR:
8606298010
Patch Files:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP:
/opt/OV/SIP/cgi-bin/WindowsNT/ovow2sip.asp
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/util/OVURLEncoder.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/util/OVResourceBundle.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ApplicationSummarizer.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/DBSummarizer.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/DFSummarizer.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/MessageGroupSummarizer.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/NodeSummarizer.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ObjectSummarizer.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ServiceSummarizer.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/OVOConnImpl_DB.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/OVOConnXML.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/OVOConnImpl_HTTP.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ListView.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/SummaryView.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/bookmarks/Bookmark.class
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/bookmarks/Bookmark$BookmarkObj.class
/opt/OV/SIP/conf/share/stations/ovoConfig.dtd
what(1) Output:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP:
/opt/OV/SIP/cgi-bin/WindowsNT/ovow2sip.asp:
ovow2sip.asp $Revision: /main/ARUBA/13 $
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/util/OVURLEncoder.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/util/OVResourceBundle.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ApplicationSummarizer.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/DBSummarizer.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/DFSummarizer.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/MessageGroupSummarizer.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/NodeSummarizer.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ObjectSummarizer.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ServiceSummarizer.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/OVOConnImpl_DB.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/OVOConnXML.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/OVOConnImpl_HTTP.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/ListView.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/ovo/SummaryView.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/bookmarks/Bookmark.class:
None
/opt/OV/SIP/webapps/ovportal/WEB-INF/classes/com/hp/ov/
portal/modules/bookmarks/Bookmark$BookmarkObj.class:
None
/opt/OV/SIP/conf/share/stations/ovoConfig.dtd:
None
cksum(1) Output:
HPOVSIP.OVSIP,fr=B.01.10,fa=HP-UX_B.11.00_32/64,v=HP:
2417996046 6352 /opt/OV/SIP/conf/share/stations/
ovoConfig.dtd
3645267264 17370 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/bookmarks/
Bookmark.class
1464406487 1506 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/bookmarks/Bookmark$
BookmarkObj.class
2313552004 1156 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/
ApplicationSummarizer.class
336302463 802 /opt/OV/SIP/webapps/ovportal/WEB-INF/classes/
com/hp/ov/portal/modules/ovo/DBSummarizer.class
2714216145 481 /opt/OV/SIP/webapps/ovportal/WEB-INF/classes/
com/hp/ov/portal/modules/ovo/DFSummarizer.class
2047349351 1358 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/
MessageGroupSummarizer.class
3596274665 949 /opt/OV/SIP/webapps/ovportal/WEB-INF/classes/
com/hp/ov/portal/modules/ovo/NodeSummarizer.class
794443401 1146 /opt/OV/SIP/webapps/ovportal/WEB-INF/classes/
com/hp/ov/portal/modules/ovo/ObjectSummarizer.class
3948720969 1118 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/
ServiceSummarizer.class
153939210 33347 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/
OVOConnImpl_DB.class
2272887225 1912 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/
OVOConnXML.class
3729390777 35683 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/
OVOConnImpl_HTTP.class
1895396925 7000 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/ListView.class
2298432134 13610 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/modules/ovo/
SummaryView.class
1822911269 2622 /opt/OV/SIP/webapps/ovportal/WEB-INF/
classes/com/hp/ov/portal/util/OVURLEncoder.class
865434702 7774 /opt/OV/SIP/webapps/ovportal/WEB-INF/classes/
com/hp/ov/portal/util/OVResourceBundle.class
536992964 112263 /opt/OV/SIP/cgi-bin/WindowsNT/ovow2sip.asp
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes: None
Equivalent Patches:
OVSIPSOL_00015:
sparcSOL: 2.6 2.7 2.8
OVSIPNT_00014:
intelWIN2000: 1.00
Patch Package Size: 300 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28768
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_28768.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_28768. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_28768.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHSS_28768.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28768.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
========================================================
BEFORE LOADING THIS PATCH...
- Stop the Tomcat server.
- If you want to reinstall SIP, then you will have to
remove the patch. Once the re-install is over you
can apply the patch again.
NOTE : Tomcat is not started after the patch is loaded
You will need to manually start it.
Also, in order to keep a history of the patches
installed on your system the post-install script
will attempt to copy this <patch_name>.text file
to /opt/OV/SIP/patches. Please make
sure this file is in /tmp before installation.
========================================================
PHSS_28768:
The new version of ovow2sip.asp delivered with this patch
($OVSIP/cgi-bin/WindowsNT/ovow2sip.asp) must be deployed
on each OVO/Windows management server in order for the
patch to be effective. Please consult your installation
documentation for deployment procedures.
-----End of Document ID: PHSS_28768------------------------------------------
Document ID: PHSS_28577
Date Loaded: 20030307
Title: s700_800 11.X OV OB4.00 patch - DA packet
Patch Name: PHSS_28577
Patch Description: s700_800 11.X OV OB4.00 patch - DA packet
Creation Date: 03/02/19
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Products:
OmniBackII A.04.00
Filesets:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
OMNIBACK-II.OMNI-OMNIST-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release manual_dependencies
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_28577
Symptoms:
PHSS_28577:
Id = HSLco30587 SR:H555006667
Backup of a JFS 3.3 filesystem reports error:
"Cannot read ACLs: ([21] Is a directory)".
Id = HSLco34580 SR:H555007992
Filesystem backup fails with an error:
"[Major] From: BSM<computer> "<object>" Time: <time>
[61:3003] Lost connection to VBDA named <object>
on host <host>.
Ipc subsystem reports: "IPC Read Error
System error: [232] Connection reset by peer"
Id = HSLco38200 SR:H555009032
Option "omit deleted files" replaces existing files on
the disk with files from the backup.
Id = HSLco38494 SR:H555009141
Backup of JFS 3.3 File System reports error:
"Cannot read ACLs: ([13] Permission denied)."
Id = HSLco39001 SR:H555009249
Raw disk restore fails on Tru 64 systems.
Id = HSLco39524 SR:H555009425
Files are corrupted after restore.
Id = HSLco39544 SR:H555009435
Restore session on HP-UX with VXFS 3 reports error:
"Cannot restore ACLs"
for every file restored.
PHSS_24979:
Id = HSLco28006 SR: H555005834
OmniBack II OmniStorage integration does not work.
Id = NSMex03397 SR: B554000528
File attributes on Sun Solaris are not restored.
Id = NSMex04470, NSMex04563 SR: H555005924, H555006283
During the backup an error:
"Can not read ACLs
([251] Function is not available)."
is reported.
Id = HSLco28412 SR: H555006014
Restore session is filling debug.log.
Id = NSMex04502 SR: H555006430
Backup of a JFS 3.3 filesystem reports an error:
"Cannot read ACLs: ([251] Function is not
available)".
Id = NSMex04545 SR: H555006179
When backing up files greater than 4Gb on IRIX
systems, Volume Backup Disk Agent reports an error:
"File is shorter than it was when it was opened.".
Id = NSMex04616 SR: H555006346
Restore of a JFS 3.3 filesystem reports an error:
"Can not set ACL: ([22] Invalid argument)".
Id = NSMex04644 SR: H555006432
Backup of a JSF 3.3 filesystem reports an error:
"Cannot read ACLs: ([223] Operation not
supported)".
Id = NSMex04683 SR: H555006504
Restore of a JFS 3.3 filesystem reports the error:
"Can not set ACL: ([22] Invalid argument)".
Defect Description:
PHSS_28577:
Id = HSLco30587 SR:H555006667
In case that JFS 3.3 filesystem contains Loopback FS
entries, Disk Agent is not able to get ACL's for such
files because they do not exist.
Resolution:
Disk Agent ignores error in case of LOFS.
Id = HSLco34580 SR:H555007992
Last message from Disk Agent is sometimes lost. This
causes Disk Agent's status reported as "Failed".
Resolution:
New OmniBack II environment variable:
OB2VBDASLEEPBEFORECLOSE
is introduced.
Its default value is 0. Setting it to a positive
number, in /<OMNIBACK_HOME>/.omnirc file specifies
number of seconds to pass before Disk Agent completes
after sending the last block of data.
Sleep time insignificantly influences backup
performance.
Id = HSLco38200 SR:H555009032
When option "omit deleted files" is enabled for restore
it ignores options "no overwrite" and "keep most
recent" although it should not.
Resolution:
"omit deleted files" option is properly interpreted
when used together with "no overwrite" and/or "keep
most recent" options.
Id = HSLco38494 SR:H555009141
In case that JFS 3.3 File System has a softlink which
points to different File System, read of ACL's can fail.
Resolution:
Disk Agent ignores such error in case of softlinks.
Id = HSLco39001 SR:H555009249
Raw disk restore does not work correctly on Tru 64
systems if disks are grouped into logical units.
Resolution:
New OB2 environment variable OB2NODIOCWLABEL is
introduced. In case that this variable is set to "1",
OB2 does not perform disk related ioctl() commands.
NOTE: In case that OB2 variable is set, and restore is
started on the normal raw disk, restore reports that
disk is "Read-only file system" and aborts.
Id = HSLco39524 SR:H555009425
In case that OB2ALIGN variable is set backup is
corrupt and restore is not possible.
Resolution:
Backup disk agent is fixed in order to work correctly
with OB2ALIGN option.
Id = HSLco39544 SR:H555009435
If files are backed up on JFS filesystem and restored
to VXFS filesystem, minor error is reported for every
file restored.
Resolution:
Message "Destination file system does not support ACLs!"
is added and is reported only once, subsequent error
messages are suppressed.
PHSS_24979:
Id = HSLco28006
Binaries for OmniStorage integration are named
incorrectly.
Resolution:
Binaries for OmniStorage integration are named
correctly.
Id = NSMex03397
When restoring files to nfs mount point on Sun Solaris
system, the files' time attributes are not restored.
Resolution:
Restore Disk Agent restores file attributes as they
were backed up.
Id = NSMex04470, NSMex04563
OmniBack II reports an error message for each softlink
on JFS filesystem that points to a non-existing file.
Resolution:
Error message for softlinks to non-existing files is
ignored.
Id = HSLco28412
Restore session on HP-UX 11.11 is filling debug.log
with following message:
"HpUxCreateObject: <filename> ioctl(VX_SETEXT)
failed, errno 251".
Resolution:
Disk Agent checking for the VXFS layout version is
improved.
Id = NSMex04502
Disk Agent is not able to get ACLs for a subdirectory
of JFS 3.3 filesystem being mountpoint for a HFS
filesystem.
Resolution:
Disk Agent ignores the error reported.
Id = NSMex04545
Type casting on IRIX systems is 32-bit.
Resolution:
Type casting on IRIX systems is changed to 64-bit.
Part of SSPUX400_002.
Id = NSMex04616
When "-overwrite" option is not used for restore,
Volume Restore Disk Agent tries to set ACLs to an
existing directory and fails.
Resolution:
Handling of JFS 3.3 objects is improved.
Id = NSMex04644
Omniback reports an error if there are softlinks from
JSF 3.3 to HFS filesystem.
Resolution:
Disk Agent ignores error in case of softlinks.
Id = NSMex04683
Omniback fails to restore files with maximum number
(17) of ACLs.
Resolution:
Backup Disk Agent is improved in order to correctly
backup files with maximum number of ACLs.
Part of SSPUX400_007.
Enhancement:
No
SR:
H555006667 H555007992 H555009032 H555006969 H555009141
H555009425 H555009435 H555009249 H555006346 H555006283
H555006014 H555005924 H555005834 H555006430 H555006504
H555006432 H555006179 B554000528
Patch Files:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/da/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/hp/s800/hp-ux-11/A.04.00/
packet.Z
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/da/sun/sparc/solaris-26/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/dec/alpha/osf1-4/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/gpl/i386/linux-60/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/ibm/rs6000/aix-42/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/ncr/i386/mp-ras/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/sco/i386/sco_sv/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/sco/i386/unixware/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/sequent/i386/dynix/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/sgi/mips/irix-62/A.04.00/
packet.Z
/opt/omni/databases/vendor/da/siemens/r400/sinix/A.04.00/
packet.Z
OMNIBACK-II.OMNI-OMNIST-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/omnist/hp/s800/hp-ux-11/A.04.00/
packet.Z
what(1) Output:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/da/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/da/sun/sparc/solaris-26/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/dec/alpha/osf1-4/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/gpl/i386/linux-60/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/ibm/rs6000/aix-42/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/ncr/i386/mp-ras/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/sco/i386/sco_sv/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/sco/i386/unixware/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/sequent/i386/dynix/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/sgi/mips/irix-62/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/da/siemens/r400/sinix/A.04.00/
packet.Z:
None
OMNIBACK-II.OMNI-OMNIST-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/omnist/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
cksum(1) Output:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
80910152 1196462 /opt/omni/databases/vendor/da/hp/s800/
hp-ux-1020/A.04.00/packet.Z
1299386790 1241423 /opt/omni/databases/vendor/da/hp/s800/
hp-ux-11/A.04.00/packet.Z
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
388173432 795710 /opt/omni/databases/vendor/da/sun/sparc/
solaris-26/A.04.00/packet.Z
3307239232 981607 /opt/omni/databases/vendor/da/dec/alpha/
osf1-4/A.04.00/packet.Z
1127132399 608547 /opt/omni/databases/vendor/da/gpl/i386/
linux-60/A.04.00/packet.Z
334942990 690446 /opt/omni/databases/vendor/da/ibm/rs6000/
aix-42/A.04.00/packet.Z
1592659862 746885 /opt/omni/databases/vendor/da/ncr/i386/
mp-ras/A.04.00/packet.Z
2988089306 721475 /opt/omni/databases/vendor/da/sco/i386/
sco_sv/A.04.00/packet.Z
247549786 719021 /opt/omni/databases/vendor/da/sco/i386/
unixware/A.04.00/packet.Z
1165474101 784299 /opt/omni/databases/vendor/da/sequent/
i386/dynix/A.04.00/packet.Z
2898863267 1365433 /opt/omni/databases/vendor/da/sgi/mips/
irix-62/A.04.00/packet.Z
3376119793 1223401 /opt/omni/databases/vendor/da/siemens/
r400/sinix/A.04.00/packet.Z
OMNIBACK-II.OMNI-OMNIST-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
1992847815 403374 /opt/omni/databases/vendor/omnist/hp/s800/
hp-ux-11/A.04.00/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If any newer SSP for the Disk Agent is installed
on your system, you must re-apply the SSP after
installing this Disk Agent patch.
PHSS_28573:
Release Date: Available
Id = HSLco39544 SR:H555009435
Bad catalog access message is displayed without PHSS_28573.
Supersedes:
PHSS_24979
Equivalent Patches:
PHSS_28576:
s700: 10.20
s800: 10.20
Patch Package Size: 11260 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28577
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_28577.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_28577. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_28577.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHSS_28577.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28577.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_28577:
NOTE!
Patch has to be installed on the Installation Server host.
The Disk Agent packets must be redistributed to the Cell
Manager system and client systems afterwards to get the
fixes into effect.
Patch includes the following Site Specific Patches:
SSPUX400_002
SSPUX400_007
-----End of Document ID: PHSS_28577------------------------------------------
Document ID: PHSS_28575
Date Loaded: 20030307
Title: s700_800 11.X OV OB4.00 patch - CC packet
Patch Name: PHSS_28575
Patch Description: s700_800 11.X OV OB4.00 patch - CC packet
Creation Date: 03/03/05
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Products:
OmniBackII A.04.00
Filesets:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release manual_dependencies
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_28575
Symptoms:
PHSS_28575:
Id = HSLco37939 SR:H555008927
While configuring OmniBack II reports using GUI,
only datalists are listed (barlists are missing).
Id = HSLco38201 SR:H555009033
GUI is unable to select Lotus object backup version
for restore.
Id = HSLco39130 SR:H555009286
Catalog binary file is deleted if original medium with
copy is recycled or exported. Importing the catalog
from copy medium is not possible.
Id = HSLco39326 SR:H555009339
Excluded directories are reselected in restore
context.
Id = HSLco39486 SR:H555009404
GUI started with "Manager.exe -restore -debug 1-99"
ends abnormally when Informix server option in
Restore context is selected.
Id = JAGae19133 SR:8606254802
'BalanceNone' option for SAP integration does
not work from GUI.
PHSS_27601:
Id = HSLco33238 SR:H555007372
Multiple messages:
"Memory copy mode activated"
appear in the session output during MS SQL backup
with the Fast Direct mode enabled.
Id = HSLco34581 SR:H555007993
"devbra" returns 'rewind on close' devices.
Id = HSLco36219 SR:H555008624
When viewing sessions in database context and then
switching context, GUI ends abnormally.
Id = HSLco36343 SR:H555008636
Statistics for DCBF directory are incorrect in GUI.
Id = HSLco36478 SR:H555008657
While attempting to restore an Informix Backup
GUI ends abnormally.
Id = HSLco36751 SR:H555008700
Move client operation does not move the client from
one cell to another but returns the message that
selected client exists in all cells.
Id = HSLco36983 SR:H555008752
Fields on notification page disappear after switching
contexts.
Id = HSLco36998 SR:H555008757
When filesystem is chosen for restore error message
pops up:
"error: Error details unknown.".
Id = HSLco37094 SR:H555008779
Notifications script can be run from anywhere even
with ExternalScriptMode set to 1.
Id = HSLco37174 SR:H555008803
Menu item /Tools/Database Administration is grayed
out in MOM GUI.
Id = HSLco37359 SR:H555008849
OmniBack II GUI abnormally ends on exit.
Id = JAGae12418 SR:8606245960
Backup GUI displays selection, which is inconsistent
with datalist.
Id = JAGae27939 SR:8606263614
GUI session restore picks the last version of file.
Id = JAGae36127 SR:8606271949
MS Exchange 2000 objects are not shown.
PHSS_26362:
Id = HSLco31458 SR:H555006839
When using "omnir -rawdisk", the following is reported:
"[Warning] From: RSM<host> "" Time:<time>
Following trees from <host>: <Label> session <ID>
were not found in database:
ToSection=Section".
Id = HSLco33515 SR:H555007485
Purgeadvisor reports that filename purge is needed
even after the purge is done.
Id = HSLco33553 SR:H555007502
If filename has the same name as directory that
previously existed, restore from GUI does not work.
Id = HSLco33579 SR:H555007519
When browsing pre-allocation media list only hexID and
label are displayed. Other properties are missing.
Id = HSLco33767 SR:H555007591
GUI crashes during browsing SQL 7 restore objects.
Id = HSLco34046 SR:H555007697
When device different from original device is selected
for restore, device is not changed and original device
is used for restore.
Id = HSLco34174 SR:H555007752
"omnicellinfo -dlobj" ends abnormally.
Id = HSLco34683 SR:H555008049
If xomni is started with -cde option, characters on
tabs in the results area are not readable.
Id = HSLco35007 SR:H555008226
Windows mount points can not be excluded from host
backup if they do not have drive letter assigned.
Id = HSLco35458 SR:H555008431
MOM GUI does not display users.
Id = HSLco35611 SR:H555008476
Restore GUI can not handle two separate Oracle7
database with the same SID. GUI does not display
all objects versions.
Id = HSLco35714 SR:H555008510
SAP restore objects are not displayed.
Id = HSLco35716 SR:H555008511
Data protection and catalog protection date for same
object differs for one day.
Id = HSLco35943 SR:H555008559
After modifying OBII 3.5 Oracle8 barlist using the
4.x GUI, RMAN script gets corrupted.
Id = JAGad92807 SR:8606223711
The current link in the Info menu is labeled
'OmniBack II FAQ' and it points to:
http://ovweb3.external.hp.com/ovfaq
PHSS_26208:
Id = HSLco31198 SR:H555006778
Restore of Oracle7 database to a different host
(backup host and target host are not the same)
fails with the following error message:
"grep: can't open
/etc/opt/omni/oracle/rcs/<Oracle_Sid>.rcs".
Id = HSLco31357 SR:H555006818
GUI crashes during object messages check.
Id = HSLco31665 SR:H555006875
When files are selected for restore and restore is
started, Restore Session Manager reports:
"Error starting VBDA <DATALIST_NAME> on <computer>:
Maximum number of files/directories specified
=> DA will not be started.
Try to specify less files/directories and
restart backup.".
Id = HSLco31031 SR:H555006752
During client upgrade it is not possible to
automatically select all the hosts for the same
Installation Server.
Id = JAGad95458 SR:8606226389
Compress option for the SAP integration in GUI is
enabled.
Id = HSLco31733 SR:H555006893
Additional dates added to periodic backup schedule
after 13 months.
Id = HSLco32409 SR:H555007048
GUI shows incorrect number of SQL objects for the
system.
Id = HSLco32637 SR:H555007125
Printing in OmniBack II 4.x HP-UX GUI does not work.
Id = HSLco32898 SR:H555007231
SNMP traps in language different than English are not
sent. Some messages in Japanese which are send trough
SNMP are truncated.
Id = HSLco32864 SR:H555007211
Linux clients can not be updated from GUI.
Id = JAGae02797 SR:8606233574
Comments can not be added to RMAN script via OmniBack
if '#' is specified before comment.
Id = HSLco32873 SR:H555007218
If you try to restore files in interval that does not
include full backup the following error appears:
"DB unknown error".
Id = HSLco33095 SR:H555007294
Device wizard text update is not working on HPUX 4.X
GUI.
Id = HSLco33471 SR:H555007472
Split pre-exec and post-exec scripts in the EMC
integration are grayed out.
PHSS_24993:
Id = HSLco23175 SR: H555003773
OmniBack II does not support Lotus Domino.
Id = HSLco26518 SR: H555005364
Copying Oracle 8 barlist using the GUI creates
incorrect barlists.
Id = HSLco27575 SR: H555005709
Command "omnimm -enter [slot_range]" returns
"Invalid slot" errors.
Id = HSLco27731 SR: H555005738
Incorrect message is displayed when trying to
browse locked internal database.
Id = HSLco27802 SR: H555005770
It is not possible to get session ID from the
database for Oracle 8 backup sessions.
Id = HSLco27803 SR: H555005771
It is not possible to use "duplex" option.
Id = HSLco27804 SR: H555005772
Number of allocated channels to be used for the
backup cannot be changed.
Id = HSLco27833 SR: H555005786
"Check Installation", "Add Components" and "Upgrade"
in GUI Clients context show incorrect information.
Id = HSLco27837 SR: H555005788
Owner's e-mail address from Administration tab in
Clients context GUI cannot be removed.
Id = HSLco28793 SR: H555006144
Omnir command starts multiple Database Session
Managers.
Id = NSMbb42370 SR: H555006525
Listing from media with "Log Files" selected results
in an internal error.
Id = NSMex04561 SR: H555006119
Restore GUI ends abnormally when trying to display
properties of a file to be restored.
Defect Description:
PHSS_28575:
Id = HSLco37939 SR:H555008927
Barlists are members of a group which is not displayed
under reporting group in GUI Reporting.
Resolution:
Barlists are moved to a group that is displayed in GUI.
Id = HSLco38201 SR:H555009033
Lotus object versions are not correctly stored in the
Internal Database which prevents GUI to find them.
Resolution:
Record structure containing information about the Lotus
object versions is changed.
Id = HSLco39130 SR:H555009286
When Recycling or exporting original medium from
OmniBack II database purge deletes Detail Catalog
Binary Files (DCBF) even if the copy medium is still
protected in the OmniBack II database. In addition
importing catalog from copy is not possible.
Resolution:
Catalog import from copy medium is possible.
Part of SSPUX400_051.
Id = HSLco39326 SR:H555009339
When object version is changed, all tree sub items
are marked again and all excludes are deleted.
Resolution:
All explicit excludes are left in restore tree after
changing object version.
Id = HSLco39486 SR:H555009404
DbgPlain function is called with wrong string format.
Resolution:
String format for DbgPlain() is corrected.
Id = JAGae19133 SR:8606254802
From OmniBack II A.04.00 onwards, 'BalanceNone' is
obsoleted and changed to 'BalanceLoad'.
Resolution:
'BalanceNone' option for SAP integration is implemented
again in GUI.
PHSS_27601:
Id = HSLco33238
MS SQL backup using Fast Direct mode results as
"proper backup", but there are too many messages.
Resolution:
Only one message of type:
"[Normal] From: BMA<hostname> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
Memory copy mode activated."
per Backup Media Agent (BMA) is displayed.
Id = HSLco34581
In case that "st_san_safe" kernel parameter is enabled,
system cannot work with 'rewind on close' devices.
So "devbra" is returning devices which are not usable.
Resolution:
"devbra" is changed in order to return
'non-rewind on close' devices only.
Id = HSLco36219
Problem occurs when there are a lot of sessions or
when there are a lot of tree nodes in scoping pane.
Resolution:
Tree control in scoping pane is dynamically collapsed
before context is switched.
Part of SSPUX400_045.
Id = HSLco36343
GUI reports incorrect statistics for DCBF directory.
Resolution:
GUI is improved in order to report correct
statistics for DCBF directory.
Id = HSLco36478
Incorrect indirection operator is used.
Resolution:
Indirection operator is used correctly.
Id = HSLco36751
List of clients residing in the destination cell
server is not updated.
Resolution:
List of clients residing in the destination cell
server is now properly updated.
Id = HSLco36983
During second initialization of combo box an error
occurs while retrieving datalist and leaving the rest
of the fields uninitialized.
Resolution:
Fields on notification page do not disappear after
switching contexts.
Id = HSLco36998
The cause for the error message is refreshing of media
tab. While refreshing it tries to retrieve object
versions of subfolders, which were not clicked, hence
not initialized.
Resolution:
GUI now searches only folders which have object
versions initialized.
Id = HSLco37094
Script can be run from anywhere because omnirpt does
not check the global options file.
Resolution:
Omnirpt was changed and now it checks the global
options file for ExternalScriptMode entry.
Id = HSLco37174
GUI expects "start backup" instead of "monitor" user
rights for starting Database context GUI.
Resolution:
GUI now checks "monitor" user rights for showing
/Tools/Database Administration menu item.
Id = HSLco37359
OmniBack II GUI abnormally ends on exit, when
there are two "Schedule" tabs opened at a time.
Resolution:
OmniBack II GUI ends normally.
Id = JAGae12418
GUI is not able to handle nested mount points.
When GUI receives excluded directory from datalist
file it assumes that the part of the string between
first and second slash represents mount point.
Besides this, mount point is shown in GUI as a
mountpoint and as directory.
Resolution:
GUI is aware of nested mountpoints.
Id = JAGae27939
Even though session selected for restore is not the
last one, GUI will pick the latest version of file
for restore.
Resolution:
Version selection mechanism is fixed.
Id = JAGae36127
"omnidb" options "-msese" and "-msexchange" do not show
MS Exchange 2000 objects.
Resolution:
New "omnidb -msese" option is implemented.
PHSS_26362:
Id = HSLco31458
Restore Session Manager in integration protocol is
changed and omnir is not updated correctly.
Resolution:
Omnir is corrected.
Id = HSLco33515
Purge advisor incorrectly predicts the growth of
the database and reports daily needed purges.
Resolution:
Purge advisor correctly recognizes when database
purge is needed.
Id = HSLco33553
Binaries are incorrectly built.
Resolution:
Binaries are correctly built.
Id = HSLco33579
Message handler for device medium object does not
parse MS_GETTEXT message correctly. Therefore
pre-allocation list does not display all the data.
Resolution:
Message parsing in device medium object improved.
Id = HSLco33767
Insufficient amount of memory is allocated.
Resolution:
Enough memory is allocated.
Id = HSLco34046
Change device option is not working in host
restore mode.
Resolution:
Code is corrected.
Id = HSLco34174
The array, which holds the objects of datalist, is too
small.
Resolution:
The array is increased.
Id = HSLco34683
CDE text default color is white. OmniBack II has white
background so text is not readable.
Resolution:
Instead of button text we now use info text for tabs,
which is black.
Id = HSLco35007
GUI is handling Windows mount point drive paths as
directories.
Resolution:
New global option HandleNestedMountPointsAsRootObjects
is introduced. If this option is set, Windows mount
points are not treated as directories and are not
excluded from backup.
Id = HSLco35458
MOM GUI is not aware of users and the result is "Not
Available" message in results area.
Resolution:
MOM GUI correctly displays users.
Part of SSPUX400_039.
Id = HSLco35611
GUI does not check on which host Oracle7 database is
backed up and all backup versions are appended to
the first one found.
Resolution:
Host matching and object version adding to list is
improved.
Id = HSLco35714
If SAP host is selected in restore context, number of
objects is correct, but first object is displayed for
every object. Cause for the problem is definition of
variable mount.
Resolution:
Value of mount is not initialized but assigned.
Id = HSLco35716
Data protection value is improperly calculated.
Resolution:
Data protection calculation is improved.
Id = HSLco35943
OBII 4.x GUI reparses RMAN script and incorrectly
recomposes it.
Resolution:
RMAN script parsing can be disabled by specifying the
following global variable:
NoGUIRMANScriptParsing=1
Part of SSPUX400_043.
Id = JAGad92807
This page is outdated. It must be labeled 'eCare
Support' and it must point to:
http://support.openview.hp.com/support.jsp?FromPROD
=ob_4_0
Resolution:
Label and links are fixed.
PHSS_26208:
Id = HSLco31198
When restoring Oracle7 tablespace that is backed
up on one backup host to another target Oracle
client, the Restore Session Manager copies the rcs
file to the backup host instead of target host.
Resolution:
The rcs files are properly restored to the
target host.
Id = HSLco31357
In case that object has large number of messages,
GUI crashes during message check.
Resolution:
GUI is improved in order not to crash.
Part of SSPUX400_013.
Id = HSLco31665
Files which are grayed out in GUI are excluded with
option -exclude. Since the number of '-exclude' options
is limited, this can cause restore to fail.
Resolution:
Handling of excluded files is changed.
Id = HSLco31031
During client upgrade it is not possible to
automatically select all the hosts for the same
Installation Server.
Resolution:
GUI is improved.
Id = JAGad95458
The Release Notes state that compression is not
supported for any of the database integrations.
Resolution:
The Compress option in GUI is disabled.
Id = HSLco31733
In next year the same date is not the same day in
week. Scheduled dates after one year are just copied,
so backups are scheduled on wrong days.
Resolution:
Days are correctly moved to next year.
Id = HSLco32409
GUI incorrectly determines which SQL objects has
already been added to SQL restore and which not.
Consequently GUI may display no objects at all,
though omnidb shows objects or the same object
several times.
Resolution:
GUI now correctly determines which SQL objects
have to be added to restore tree.
Id = HSLco32637
Printing is not possible due to missing windu xprinter
directory and *.drv files in OmniBack II installation.
Resolution:
Files are copied to the correct location.
Id = HSLco32898
Formatting of messages for other languages is
different. In case of Japanese messages the buffer
size, which holds SNMP messages, is incorrectly
calculated.
Resolution:
Calculation of buffer size is changed.
Id = HSLco32864
GUI expects Windows Installation Server for Linux
client. However the right one is UNIX Installation
Server.
Resolution:
Checking is improved with new macro for GUI.
Id = JAGae02797
OmniBack II uses '#' character for internal parsing.
Resolution:
Code is changed. New character <alt + 178> is used for
OmniBack II internal parsing.
Id = HSLco32873
Selecting files for restore within interval that does
not include the full backup will trigger an error in
the list_full_rest_chain function.
Resolution:
The function marks an error and sends it to GUI, which
will show a message:
"You have chosen an interval which does not include
all the sessions needed to compose a full restore
chain. Please reconnect to the Cell Server".
Id = HSLco33095
When adding new device in GUI and device type is
changed to SCSI library in first step of wizard,
data format is not changed to interface type.
Resolution:
Window is invalidated and updated.
Id = HSLco33471
Split pre-exec and post-exec scripts working with the
EMC integration are disabled.
Resolution:
Split pre-exec and post-exec scripts working with the
EMC integration are enabled again.
Part of SSPUX400_027.
PHSS_24993:
Id = HSLco23175
OmniBack II does not support Lotus Domino.
Resolution:
OmniBack II supports Lotus Domino.
OmniBack II Lotus Domino integration will work when in
addition these patches (or their successors) are
available and installed:
PHSS_24994/PHSS_24995 (Core)
PHSS_24990/PHSS_24991 (Lotus)
Id = HSLco26518
Copying Oracle 8 barlist using the GUI does not
replace old barlist's name throughout the new
barlist.
Resolution:
Copying Oracle 8 barlists using the GUI works
properly.
Id = HSLco27575
When the slot range is between 1 and 99, a leading
zero is appended to "slot_range" value, which causes
"Invalid slot" errors.
Resolution:
Command "omnimm -enter [slot_range]" works as
expected.
Id = HSLco27731
When trying to browse Omniback's internal database
during the database purge execution, incorrect
"Errors - Details Unknown"
message is displayed.
Resolution:
When trying to browse Omniback's internal database
during the database purge execution, proper
"Cannot open database! Somebody is running
omnidbcheck or omnidbutil command!"
message is displayed.
Id = HSLco27802
Starting Oracle8 backup session immediately after
saving the barlist results in changing barlists' name
to default "New1".
Resolution:
Correct barlist name is set when searching for
the Oracle 8 backup sessions using barlist name
as a filter.
Id = HSLco27803
Recovery Manager script is overwrites duplex every
time it is generated.
Resolution:
GUI part responsible for handling Oracle 8 objects is
improved.
Id = HSLco27804
Generating the Recovery Manager script for backup
calculates the number of channels needed based on
concurrency and default options.
Resolution:
GUI part responsible for handling Oracle 8 objects is
improved.
Id = HSLco27833
"Check Installation", "Add Components" and "Upgrade"
in GUI Clients list all the clients regardless of
Installation Server type (HP-UX or
Windows NT/2000).
Resolution:
Correct list of clients is listed when using option in
GUI Clients context.
Id = HSLco27837
The entries to Owner e-mail text box are added to
cell_info file and cannot be removed.
Resolution:
General Owner email text box displays last e-mail
address entered.
Id = HSLco28793
New Database Session Manager instance is started
every time when omnir is trying to retrieve object
information from the database.
Resolution:
Omnir reuses existing connections.
Part of SSPUX400_003.
Id = NSMbb42370
"Log Files" option is not properly implemented.
Resolution:
"Log Files" option is properly implemented.
Id = NSMex04561
A NULL pointer is set to one of the structures
controlling the files' properties. This causes Restore
Gui to end abnormally.
Resolution:
Files' properties are properly displayed.
Enhancement:
No
SR:
H555009286 H555008927 H555009202 H555009033 H555008888
H555009404 8606254802 H555009064 H555009155 H555009339
H555008764 H555008657 H555008757 H555007993 8606271949
H555008849 H555008779 H555008700 8606263614 H555008803
H555007372 H555008624 H555007429 H555008752 8606245960
H555008636 H555008476 H555006839 H555008559 8606223711
H555007697 H555008510 H555007502 H555008511 H555008431
H555008226 H555007752 H555008049 H555007519 H555007591
H555007485 H555006893 H555006875 H555007211 8606226389
H555006778 H555007231 H555007125 H555007218 H555007048
H555007472 H555006752 8606233574 H555007294 H555006818
H555005786 H555005788 H555006144 H555006119 H555005364
H555006525 H555005770 H555003773 H555005771 H555005709
H555005772 H555005738
Patch Files:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-1020/
A.04.00/packet.Z
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/dec/alpha/osf1-4/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/gpl/i386/linux-60/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/ibm/rs6000/aix-42/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/ncr/i386/mp-ras/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/sco/i386/sco_sv/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/sco/i386/unixware/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/sequent/i386/dynix/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/sgi/mips/irix-62/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/siemens/r400/sinix/A.04.00/
packet.Z
/opt/omni/databases/vendor/cc/sun/sparc/solaris-26/A.04.00/
packet.Z
what(1) Output:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-1020/
A.04.00/packet.Z:
None
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/dec/alpha/osf1-4/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/gpl/i386/linux-60/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/ibm/rs6000/aix-42/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/ncr/i386/mp-ras/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/sco/i386/sco_sv/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/sco/i386/unixware/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/sequent/i386/dynix/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/sgi/mips/irix-62/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/siemens/r400/sinix/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/cc/sun/sparc/solaris-26/A.04.00/
packet.Z:
None
cksum(1) Output:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
553804550 38652165 /opt/omni/databases/vendor/cc/hp/s800/
hp-ux-1020/A.04.00/packet.Z
3039485572 38652165 /opt/omni/databases/vendor/cc/hp/s800/
hp-ux-11/A.04.00/packet.Z
4090032144 212121 /opt/omni/databases/vendor/momgui/hp/s800/
hp-ux-11/A.04.00/packet.Z
3270119452 211969 /opt/omni/databases/vendor/momgui/hp/s800/
hp-ux-1020/A.04.00/packet.Z
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
3131590917 6673923 /opt/omni/databases/vendor/cc/dec/alpha/
osf1-4/A.04.00/packet.Z
2798086351 5283861 /opt/omni/databases/vendor/cc/gpl/i386/
linux-60/A.04.00/packet.Z
1563570633 5917638 /opt/omni/databases/vendor/cc/ibm/rs6000/
aix-42/A.04.00/packet.Z
2696817842 5837233 /opt/omni/databases/vendor/cc/ncr/i386/
mp-ras/A.04.00/packet.Z
3076148397 5691345 /opt/omni/databases/vendor/cc/sco/i386/
sco_sv/A.04.00/packet.Z
3447412972 5664859 /opt/omni/databases/vendor/cc/sco/i386/
unixware/A.04.00/packet.Z
3495701467 5788701 /opt/omni/databases/vendor/cc/sequent/
i386/dynix/A.04.00/packet.Z
2054354602 7681359 /opt/omni/databases/vendor/cc/sgi/mips/
irix-62/A.04.00/packet.Z
2958712973 6535961 /opt/omni/databases/vendor/cc/siemens/
r400/sinix/A.04.00/packet.Z
3805353894 6193257 /opt/omni/databases/vendor/cc/sun/sparc/
solaris-26/A.04.00/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If any newer SSP for the Cell Console is installed
on your system, you must re-apply the SSP after
installing this Cell Console patch.
PHSS_28235:
Release Date: Available
Id = HSLco37939 SR:H555008927
Id = HSLco39130 SR:H555009286
Id = HSLco32873 SR:H555007218
Id = HSLco32898 SR:H555007231
Id = HSLco33515 SR:H555007485
Id = HSLco35007 SR:H555008226
PHSS_28235 is required for these defect fixes.
PHSS_27586:
Release Date: Available
Id = HSLco34581 SR:H555007993
PHSS_27586 is required for this defect fix.
PHSS_27463:
Release Date: Available
Id = HSLco33553 SR:H555007502
Id = HSLco35716 SR:H555008511
Id = JAGad92807 SR:8606223711
Id = HSLco31357 SR:H555006818
Id = HSLco32873 SR:H555007218
Bad catalog access messages are displayed without
PHSS_27463.
OMNIBACK_00056:
Release Date: Available
Id = HSLco33238 SR:H555007372
OMNIBACK_00056 is required for this defect fix.
Supersedes:
PHSS_27601 PHSS_26362 PHSS_26208 PHSS_24993
Equivalent Patches:
PHSS_28574:
s700: 10.20
s800: 10.20
Patch Package Size: 135800 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28575
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_28575.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_28575. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_28575.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHSS_28575.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28575.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_28575:
NOTE!
This Patch has to be installed on the Installation
Server host.
The User Interface must be redistributed to the client
system(s) after the installation of the patch in order
to get the fixes into effect.
For distribution of the User Interface, refer to the
OmniBackII Installation guide.
Patch includes the following Site Specific Patches:
SSPUX400_003
SSPUX400_013
SSPUX400_027
SSPUX400_039
SSPUX400_043
SSPUX400_045
SSPUX400_051
-----End of Document ID: PHSS_28575------------------------------------------
Document ID: PHSS_28573
Date Loaded: 20030307
Title: s700_800 11.X OV OB4.00 patch - CORE packet
Patch Name: PHSS_28573
Patch Description: s700_800 11.X OV OB4.00 patch - CORE packet
Creation Date: 03/03/03
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Products:
OmniBackII A.04.00
Filesets:
OMNIBACK-II.OMNI-CORE,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
OMNIBACK-II.OMNI-CORE-IS,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
OMNIBACK-II.OMNI-INTEG-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_28573
Symptoms:
PHSS_28573:
Id = HSLco37433 SR:H555008856
When restoring Object with using "Interval" in the
restore Graphical User Interface the following
message is displayed:
"Bad catalog access for message #10928 in set 12".
Id = HSLco37754 SR:H555008900
In Cell Manager environment with large number of
clients, when operations like check_installation
or add_components are performed at the same time
on all clients, the error message appears for the
linux clients:
"|Critical| <host>: Unsupported architecture/OS type
(<host> <time>)
Skipping client!".
Id = HSLco37977 SR:H555008950
After running "omnidbutil -cdbsync", the Catalog
Database is lost.
Id = HSLco38032 SR:H555008977
During Oracle Split Mirror Backup Data Protector
displays error:
"Exec_SVRMGRL[5]: /var/opt/omni/tmp/smb.<PID>:
cannot create
Exec_SVRMGRL[5]: /var/opt/omni/tmp/smb.<PID>:
cannot open
[Major] From: ob2rman.exe<hostname> "<barlist_name>"
Time: mm/dd/yy hh:mm:ss
The Production Database is not in automatic archival
mode.
Please set log_archive_start = true in your init.ora
file."
Id = HSLco38113 SR:H555009015
Check Installation feature fails for Red Hat 8.0 Linux
clients.
Id = HSLco39544 SR:H555009435
Restore session on HP-UX with VXFS 3 reports error:
"Cannot restore ACLs"
for every file restored.
PHSS_27463:
Id = HSLco36403 HSLco36460 SR:H555008641 SR:H555008651
Whenever there is OmniBack II activity going on in the
Cell, the update of the NT clients fails.
Id = HSLco36565 SR:H555008667
Scheduled backup does not start.
Id = JAGad92807 SR:8606223711
The current link in the Info menu is labeled
'OmniBack II FAQ' and it points to:
http://ovweb3.external.hp.com/ovfaq
Id = JAGae08985 SR:8606241727
Upgrade fails on non HP-UX UNIX clients if OmniBack II
port is not default.
PHSS_26352:
Id = HSLco31357 SR:H555006818
GUI crashes during object messages check.
Id = HSLco32089 SR:H555006968
Autorecover fails with error:
"Current medium is refused for restore. Aborting!".
Id = HSLco32873 SR:H555007218
If you try to restore files in interval that does not
include full backup the following error appears:
"DB unknown error".
PHSS_25949:
Id = HSLco31142 SR: H555006771
Load balancing is not working properly.
Id = HSLco31532 SR: H555006852
Usage of OB2DASDRIVESTATUS2 is not described.
Id = JAGad96899 SR: 8606227839
Omniback II does not support Ext3 filesystem on
Linux systems.
Id = JAGae00863 SR: 8606231625
Installation script for SCO operating system is
incorrect.
PHSS_24995:
Id = HSLco23175 SR: H555003773
OmniBack II does not support Lotus Domino.
Id = NSMex04595 SR: H555006323
Manual installation of Omniback II 4.00 on Solaris
client fails with
"Update of the omni_info file failed for Core".
PHSS_24977:
Id = HSLco27823 H555005779
OmniBack II does not recognize Reiser filesystem on
Linux.
Id = HSLco28309 H555005988
Installation of AIX 5.1 client fails.
Id = HSLco27521 H555005696
During scheduled purge error message is displayed:
"Bad catalog access for message #3137 in set 11".
Defect Description:
PHSS_28573:
Id = HSLco37433 SR:H555008856
Message for restoring Object with using "Interval"
is not added to Japanese message catalog.
Resolution:
Message catalog is updated.
Id = HSLco37754 SR:H555008900
When adding components to more Linux clients the
variable which holds the index to machine type is
changing, so the machine type matching is not
successful.
Resolution:
Algorithm for unix platform is changed.
Id = HSLco37977 SR:H555008950
If "omnidbutil -cdbsync" is started on the
Manager-of-Managers client, local Media Management
Database (MMDB) is used for database synchronization.
Resolution:
If "omnidbutil -cdbsync" is running on a
Manager-of-Managers client, it issues an
error message and stops the operation.
Id = HSLco38032 SR:H555008977
The /var/opt/omni/tmp/smb.(PID) file is not removed
at the completion of the smb_common.sh script.
When the PID is duplicated then the new
/var/opt/omni/tmp/smb.(PID) file can not be created.
Resolution:
The /var/opt/omni/tmp/smb.(PID) file is removed
at the completion of the smb_common.sh script.
Part of SSPUX400_048.
Id = HSLco38113 SR:H555009015
Red Hat 8.0 Linux command "nslookup" outputs an extra
message which causes Check Installation to fail.
Resolution:
"-silent" option is used when running Check Installation
feature on Red Hat 8.0 Linux clients.
Id = HSLco39544 SR:H555009435
If files are backed up on JFS filesystem and restored
to VXFS filesystem, minor error is reported for every
file restored.
Resolution:
Message "Destination file system does not support ACLs!"
is added and is reported only once, subsequent error
messages are suppressed.
PHSS_27463:
Id = HSLco36403 HSLco36460
Double error unpacking, variable name confusion.
Resolution:
Removed double error unpacking, changed variable.
Id = HSLco36565
When schedule scheme 'every <number of days> days'
is used, OmniBack II is not aware of word 'days'.
Resolution:
Word 'days' is added to the catalog.
Id = JAGad92807
This page is outdated. It must be labeled 'eCare
Support' and it must point to:
http://support.openview.hp.com/support.jsp?FromPROD
=ob_4_0
Resolution:
Label and links are fixed.
Id = JAGae08985
Check for echo command is not done correctly.
Resolution:
Checking mechanism is corrected.
PHSS_26352:
Id = HSLco31357
In case that object has large number of messages,
GUI crashes during message check.
Resolution:
GUI is improved in order not to crash.
Part of SSPUX400_013.
Id = HSLco32089
Autorecover does not set the correct block size for
the device.
Resolution:
Option for setting the correct block size is added.
Id = HSLco32873
Selecting files for restore within interval that does
not include the full backup will trigger an error in
the list_full_rest_chain function.
Resolution:
The function marks an error and sends it to GUI, which
will show a message:
"You have chosen an interval which does not include
all the sessions needed to compose a full restore
chain. Please reconnect to the Cell Server".
PHSS_25949:
Id = HSLco31142
There is no warning reported when one creates a
datalist or a barlist with load balancing enabled and
minimum number of devices greater than number of
configured logical devices.
Resolution:
New warning is added.
Id = HSLco31532
Usage of environment variable is not described in
omnirc.tmpl file.
Resolution:
Latest update of omnirc.tmpl is located in /opt/omni
directory after the patch installation.
Id = JAGad96899
Omniback II does not support Ext3 filesystem on
Linux systems.
Resolution:
Omniback II supports Ext3 filesystem on Linux systems.
Part of SSPUX400_018.
Id = JAGae00863
Installation script on SCO operating system tries to
start incorrect shell.
Resolution:
Correct installation script is added.
PHSS_24995:
Id = HSLco23175
OmniBack II does not support Lotus Domino.
Resolution:
OmniBack II supports Lotus Domino on HP-UX 11.x and
AIX systems.
OmniBack II Lotus Domino integration will work when in
addition these patches (or their successors) are
available and installed:
PHSS_24992/PHSS_24993 (Cell Console)
PHSS_24990/PHSS_24991 (Lotus)
Id = NSMex04595
Component checking in omni_rinst.sh is case
sensitive.
Resolution:
Component checking in omni_rinst.sh allows usage of
"Core" and "CORE" as component name.
PHSS_24977:
Id = HSLco27823
OmniBack II does not recognize Reiser filesystem om
Linux systems.
Resolution:
OmniBack II recognizes Reiser filesystem.
Id = HSLco28309
OmniBack II does not recognize AIX 5.1 operating
system.
Resolution:
OmniBack II software can be installed on AIX 5.1
systems.
Id = HSLco27521
Message 3137 is not defined in the catalog.
Resolution:
Appropriate message is added to catalog.
Enhancement:
No
SR:
H555008891 H555008856 H555008686 H555009015 H555008977
H555008900 H555009435 H555008950 H555008667 H555008641
8606241727 H555008651 8606223711 H555008681 H555007218
H555006968 H555006818 8606227839 H555006852 H555006771
8606231625 H555003773 H555006323 H555005696 H555005779
H555005988
Patch Files:
OMNIBACK-II.OMNI-CORE,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/lbin/.util
/opt/omni/.CII_CORE
/opt/omni/newconfig/etc/opt/omni/cell/omni_format
/etc/opt/omni/install/omni_info
/etc/opt/omni/cell/omni_format
OMNIBACK-II.OMNI-CORE-IS,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
A.04.00/packet.Z
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
A.04.00/packet.Z
/opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.00/
packet.Z
/opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
A.04.00/packet.Z
/opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
A.04.00/packet.Z
/opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar
/opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar
/opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar
/opt/omni/databases/utils/gpl/i386/linux-60/utils.tar
/opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar
/opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar
/opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar
/opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar
/opt/omni/databases/utils/sco/i386/sco_sv/utils.tar
/opt/omni/databases/utils/sco/i386/unixware/utils.tar
/opt/omni/databases/utils/sequent/i386/dynix/utils.tar
/opt/omni/databases/utils/sgi/mips/irix-62/utils.tar
/opt/omni/databases/utils/siemens/r400/sinix/utils.tar
/opt/omni/lbin/bmsetup
/opt/omni/.CII_CORE-IS
OMNIBACK-II.OMNI-INTEG-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.00/
packet.Z
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.00/
packet.Z
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.00/
packet.Z
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.00/
packet.Z
/opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
A.04.00/packet.Z
what(1) Output:
OMNIBACK-II.OMNI-CORE,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/lbin/.util:
[TZ=GMT0 /opt/omni/lbin/.util -version]
/opt/omni/.CII_CORE:
None
/opt/omni/newconfig/etc/opt/omni/cell/omni_format:
None
/etc/opt/omni/install/omni_info:
None
/etc/opt/omni/cell/omni_format:
None
OMNIBACK-II.OMNI-CORE-IS,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
A.04.00/packet.Z:
None
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
A.04.00/packet.Z:
None
/opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
A.04.00/packet.Z:
None
/opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
A.04.00/packet.Z:
None
/opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar:
None
/opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar:
None
/opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar:
None
/opt/omni/databases/utils/gpl/i386/linux-60/utils.tar:
None
/opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar:
None
/opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar:
None
/opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar:
None
/opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar:
None
/opt/omni/databases/utils/sco/i386/sco_sv/utils.tar:
None
/opt/omni/databases/utils/sco/i386/unixware/utils.tar:
None
/opt/omni/databases/utils/sequent/i386/dynix/utils.tar:
None
/opt/omni/databases/utils/sgi/mips/irix-62/utils.tar:
None
/opt/omni/databases/utils/siemens/r400/sinix/utils.tar:
None
/opt/omni/lbin/bmsetup:
[TZ=GMT0 /opt/omni/lbin/bmsetup -version]
HP OpenView OmniBack II A.04.00: BMSETUP, internal b
uild PHSS_28572/PHSS_28573, built on Mon Feb
17 10:34:39 2003
/opt/omni/.CII_CORE-IS:
None
OMNIBACK-II.OMNI-INTEG-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.00/
packet.Z:
None
/opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
A.04.00/packet.Z:
None
cksum(1) Output:
OMNIBACK-II.OMNI-CORE,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
2896737699 32224 /opt/omni/lbin/.util
71270127 641 /opt/omni/.CII_CORE
2117072643 2866 /opt/omni/newconfig/etc/opt/omni/cell/
omni_format
636731399 2163 /etc/opt/omni/install/omni_info
2117072643 2866 /etc/opt/omni/cell/omni_format
OMNIBACK-II.OMNI-CORE-IS,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
2044879380 1824973 /opt/omni/databases/vendor/omnicf/dec/
alpha/osf1-4/A.04.00/packet.Z
1542707216 1344533 /opt/omni/databases/vendor/omnicf/gpl/
i386/linux-60/A.04.00/packet.Z
3317744873 1730959 /opt/omni/databases/vendor/omnicf/hp/
s800/hp-ux-1020/A.04.00/packet.Z
1143072600 1731437 /opt/omni/databases/vendor/omnicf/hp/
s800/hp-ux-11/A.04.00/packet.Z
872779850 1609531 /opt/omni/databases/vendor/omnicf/ibm/
rs6000/aix-42/A.04.00/packet.Z
3082715588 1540235 /opt/omni/databases/vendor/omnicf/ncr/
i386/mp-ras/A.04.00/packet.Z
3291415551 1497017 /opt/omni/databases/vendor/omnicf/sco/
i386/sco_sv/A.04.00/packet.Z
1399538326 1467001 /opt/omni/databases/vendor/omnicf/sco/
i386/unixware/A.04.00/packet.Z
3649912488 1340392 /opt/omni/databases/vendor/omnicf/
sequent/i386/dynix/A.04.00/packet.Z
3320549539 2161431 /opt/omni/databases/vendor/omnicf/sgi/
mips/irix-62/A.04.00/packet.Z
3464107029 1780957 /opt/omni/databases/vendor/omnicf/
siemens/r400/sinix/A.04.00/packet.Z
2384495858 1585263 /opt/omni/databases/vendor/omnicf/sun/
sparc/solaris-26/A.04.00/packet.Z
102090186 51200 /opt/omni/databases/utils/sun/sparc/
solaris-26/utils.tar
1566334526 51200 /opt/omni/databases/utils/sun/sparc/
solaris-7/utils.tar
867539568 51200 /opt/omni/databases/utils/dec/alpha/osf1-4/
utils.tar
3718933284 51200 /opt/omni/databases/utils/gpl/i386/
linux-60/utils.tar
209600688 40960 /opt/omni/databases/utils/hp/s800/
hp-ux-1020/utils.tar
209600688 40960 /opt/omni/databases/utils/hp/s800/hp-ux-11/
utils.tar
2438424798 51200 /opt/omni/databases/utils/ibm/rs6000/
aix-42/utils.tar
2438424798 51200 /opt/omni/databases/utils/ncr/i386/mp-ras/
utils.tar
2563470182 51200 /opt/omni/databases/utils/sco/i386/sco_sv/
utils.tar
663062858 51200 /opt/omni/databases/utils/sco/i386/unixware/
utils.tar
2438424798 51200 /opt/omni/databases/utils/sequent/i386/
dynix/utils.tar
2438424798 51200 /opt/omni/databases/utils/sgi/mips/irix-62/
utils.tar
2156907937 51200 /opt/omni/databases/utils/siemens/r400/
sinix/utils.tar
305615009 419007 /opt/omni/lbin/bmsetup
3684608335 71 /opt/omni/.CII_CORE-IS
OMNIBACK-II.OMNI-INTEG-P,fr=A.04.00,fa=HP-UX_B.11.00_32/64,
v=HP:
891553072 1563687 /opt/omni/databases/vendor/integ/gpl/i386/
linux-60/A.04.00/packet.Z
2208521625 2305695 /opt/omni/databases/vendor/integ/hp/s800/
hp-ux-1020/A.04.00/packet.Z
4128259661 2305001 /opt/omni/databases/vendor/integ/hp/s800/
hp-ux-11/A.04.00/packet.Z
860184195 2303071 /opt/omni/databases/vendor/integ/ibm/
rs6000/aix-42/A.04.00/packet.Z
4182339549 2013679 /opt/omni/databases/vendor/integ/sun/
sparc/solaris-26/A.04.00/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHSS_27463 PHSS_26352 PHSS_25949 PHSS_24995 PHSS_24977
Equivalent Patches:
PHSS_28572:
s700: 10.20
s800: 10.20
Patch Package Size: 30550 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28573
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_28573.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_28573. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_28573.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHSS_28573.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28573.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_28573:
NOTE!
This Patch has to be installed on all Installation
server hosts.
Because the Core package is a part of all agents, all
client packages need to be redistributed after this patch
was installed on the installation server in order to
enable the changes (Disk Agents, Media Agents, ...).
Patch includes the following Site Specific Patches:
SSPUX400_013
SSPUX400_018
SSPUX400_048
-----End of Document ID: PHSS_28573------------------------------------------
Document ID: PHSS_26675
Date Loaded: 20030307
Title: s700_800 11.X Cluster Object Manager A.01.03.01
Patch Name: PHSS_26675
Patch Description: s700_800 11.X Cluster Object Manager A.01.03.01
Creation Date: 03/01/29
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.00 11.11
s800: 11.00 11.11
Products:
Cluster Object Manager A.01.03
Filesets:
Cluster-OM.CM-DEN-MOF,fr=A.01.03,fa=HP-UX_B.11.00_32/64,v=HP
Cluster-OM.CM-OM,fr=A.01.03,fa=HP-UX_B.11.00_32/64,v=HP
Cluster-OM.CM-OM-AUTH,fr=A.01.03,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical:
Yes
PHSS_26675: ABORT
This is critical because cmomd core dumps if a port
scanning tool like nmap talks to it.
PHSS_24292: ABORT
The Object Manager aborts with a core dump
when the where clause in the query string is
multiple of 128 bytes long.
Category Tags:
defect_repair enhancement general_release critical
halts_system
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_26675
Symptoms:
PHSS_26675:
1. In a trusted hpux system, Object Manager failed to
authenticate if the password was greater than
eight characters in length.
2. Admin functions executed through ServiceGuard
Manager are not logged in syslog on a cluster
node where operation takes place.
3. cmomd core dumps if a port scanning tool like
nmap talks to it
PHSS_24292:
1. An API client connection can cause cmomd to abort
with a core dump if client issues a query string with
a where clause exactly in the multiples of 128 bytes
long. The core is located in /var/opt/cmom directory.
PHSS_22175:
1. Without this patch and ServiceGuard patch PHSS_24678,
"ServiceGuard Manager A.02.00" cannot perform cluster
administrative operations such as running and halting
nodes, packages or the cluster. Note that ServiceGuard
Manager releases before A.02.00 do not support cluster
administrative operations.
Defect Description:
PHSS_26675:
1. As part of authentication logic, we used the crypt()
function, which can handle only eight characters.
Resolution:
Used the bigcrypt() method if the system is in
"trusted system" mode.
2. This is an enhancement request. Remote admin requests
executed through Object Manager were not tracked
through syslog on a cluster node where operation
takes place.
Resolution:
Enhanced admin code paths in config library
and ServiceGuard daemons to log more information
about the user requesting the request: where the
request is being issued and how it is issued.
In order for this additional logging to be active,
ServiceGuard 11.13 Patch PHSS_27722 must also be
installed.
3. We prematurely deallocate a configuration object,
that is needed later.
Resolution:
Deallocate the configuration object only when it
is no longer needed.
PHSS_24292:
1. The query engine does not allocate enough memory before
appending a termination character to an incoming string
while processing a where clause from the query string.
Under a heavy system load, when the Object Manager tries
to free up the reference to this memory location, it
core dumps.
Resolution:
Reallocate the query string memory required to
accomodate the termination character.
PHSS_22175:
1. This feature was not supported in prior releases.
Resolution: This patch along with ServiceGuard patch
PHSS_24678 enables cluster administrative operations.
Enhancement:
Yes
PHSS_26675:
This patch delivers new functionality for logging the
audit messages into the syslog.log for the admin
operations.
PHSS_22175:
With this patch and ServiceGuard patch PHSS_24678,
"ServiceGuard Manager A.02.00" can perform cluster
administrative operations such as running and halting
nodes, packages or the cluster.
SR:
8606215549 8606228018 8606257589 8606214892 8606286661
Patch Files:
Cluster-OM.CM-DEN-MOF,fr=A.01.03,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/cmom/mof/CMlogicalconsumer.mof
/opt/cmom/mof/OMevent.mof
Cluster-OM.CM-OM,fr=A.01.03,fa=HP-UX_B.11.00_32/64,v=HP:
/opt/cmom/lbin/cmomd
/opt/cmom/lib/libcmom.1
/opt/cmom/lib/libcmom.sl
/opt/cmom/mof/OMcore.mof
Cluster-OM.CM-OM-AUTH,fr=A.01.03,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/cmom/authenproviders/sehostbasedprovider.omp
/opt/cmom/authenproviders/seuserpasswdprovider.omp
what(1) Output:
Cluster-OM.CM-DEN-MOF,fr=A.01.03,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/cmom/mof/CMlogicalconsumer.mof:
ServiceGuard Schema 1.3.1
/opt/cmom/mof/OMevent.mof:
Schema Name: Object Manager
Version: 1.3.1
Cluster-OM.CM-OM,fr=A.01.03,fa=HP-UX_B.11.00_32/64,v=HP:
/opt/cmom/lbin/cmomd:
HP92453-02A.10.20 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
Build date: Mon Feb 24 19:50:08 PST 2003
Build id: ibld_api_a0103_patch
Product Name: HP Cluster Object Manager
Version: A.01.03.01
Patch Name: PHSS_26675
Cluster Object Manager Daemon
/opt/cmom/lib/libcmom.1:
Product Name: HP Cluster Object Manager
Version: A.01.03.01
Patch Name: PHSS_26675
Cluster Object Manager Library
Build date: Mon Feb 24 19:50:08 PST 2003
Build id: ibld_api_a0103_patch
/opt/cmom/lib/libcmom.sl:
Product Name: HP Cluster Object Manager
Version: A.01.03.01
Patch Name: PHSS_26675
Cluster Object Manager Library
Build date: Mon Feb 24 19:50:08 PST 2003
Build id: ibld_api_a0103_patch
/opt/cmom/mof/OMcore.mof:
Schema Name: Object Manager
Version: 1.3.1
Cluster-OM.CM-OM-AUTH,fr=A.01.03,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/cmom/authenproviders/sehostbasedprovider.omp:
Product Name: HP Cluster Object Manager
Version: A.01.03.01
Patch Name: PHSS_26675
HP Cluster Object Manager Host-Based Authentication
Provider
Build date: Mon Feb 24 19:47:54 PST 2003
Build id: ibld_api_a0103_patch
/opt/cmom/authenproviders/seuserpasswdprovider.omp:
Product Name: HP Cluster Object Manager
Version: A.01.03.01
Patch Name: PHSS_26675
HP Cluster Object Manager User-Password Authenticati
on Provider
Build date: Mon Feb 24 19:48:04 PST 2003
Build id: ibld_api_a0103_patch
cksum(1) Output:
Cluster-OM.CM-DEN-MOF,fr=A.01.03,fa=HP-UX_B.11.00_32/64,
v=HP:
2419401695 1321 /opt/cmom/mof/CMlogicalconsumer.mof
2205947407 3070 /opt/cmom/mof/OMevent.mof
Cluster-OM.CM-OM,fr=A.01.03,fa=HP-UX_B.11.00_32/64,v=HP:
3395332106 325328 /opt/cmom/lbin/cmomd
1845186343 1347584 /opt/cmom/lib/libcmom.1
1845186343 1347584 /opt/cmom/lib/libcmom.sl
3115965923 18850 /opt/cmom/mof/OMcore.mof
Cluster-OM.CM-OM-AUTH,fr=A.01.03,fa=HP-UX_B.11.00_32/64,
v=HP:
979664160 53248 /opt/cmom/authenproviders/
sehostbasedprovider.omp
3147888491 32768 /opt/cmom/authenproviders/
seuserpasswdprovider.omp
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHSS_22175 PHSS_24292
Equivalent Patches: None
Patch Package Size: 1780 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_26675
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_26675.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_26675. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_26675.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHSS_26675.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_26675.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
SR#: 8606215549
PHSS_22175 or later, along with ServiceGuard patch
PHSS_24678 or later and ServiceGuard Manager version
A.02.00 or later, enables Cluster Administration features.
If the customer has already installed ServiceGuard patch
PHSS_24678 or later and upgraded to ServiceGuard
Manager version A.02.00 or later, but has not yet enabled
Administration features and wishes to do so, he should
restart ServiceGuard Manager after installing this patch.
-----End of Document ID: PHSS_26675------------------------------------------
Document ID: PHKL_28720
Date Loaded: 20030307
Title: s700_800 11.22 MCA patch
Patch Name: PHKL_28720
Patch Description: s700_800 11.22 MCA patch
Creation Date: 03/03/05
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.22
s800: 11.22
Products: N/A
Filesets:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP
Automatic Reboot?: Yes
Status: General Release
Critical:
Yes
PHKL_28720: OTHER
System will not perform a crash dump when
Fatal MCAs occur,
PHKL_28093: PANIC
PHKL_28203: OTHER
Crash dump generated for INIT does not contain all
relevant register information required by kernel
debuggers and crash analyzers.
Category Tags:
defect_repair hardware_enablement general_release critical
panic manual_dependencies
Path Name: /hp-ux_patches/s700_800/11.X/PHKL_28720
Symptoms:
PHKL_28720:
( SR:8606274247 CR:JAGae38324 )
An MCA is a Machine Check Abort and indicates a serious
system error; MCAs on IPF systems are equivalent to HPMCs
on PA platforms. Note that this is an IPF only Patch.
For IPF platforms, there are a number of MCA related issues
in the 11.22 initial release of HP-UX. This patch
will supply support engineers with better memory crash
dumps for analysis in the case of an MCA. This helps them
better support customers who are experiencing difficulties
with IPF platforms.
Some MCAs may cause the system to reboot with no indication
of what happened. No console output will be seen. No crash
dump will be taken for support engineers to analyze.
The "stack unwind problem" refers to the debugger's
inability to get a stack trace of the processor crash
events from a system memory crash dump after an MCA. After
the dump is written, and the system reboots, the expected
behavior for debuggers such as kwdb, or q4 is a display of
each processor's stack trace, using the "trace event X"
command. But instead the "trace event" command fails with
an assertion failure message or unwind internal library
error.
PHKL_28093:
( SR:8606276344 CR:JAGae40422 )
On the Intel OEM i870 platform only, HP-UX will fail to
initialize the 4 port Fast Ethernet card. This console
message will print repeatedly:
btlan: Initializing 10/100BASE-TX card at 0/3/31/0/2/0/4/0.
btlan: Failed to link driver ISR.
wsio_claim init failed isc=0xe00000010dff1400 name=btlan
PHKL_28203:
( SR:8606276202 CR:JAGae40280 )
On IPF, the stack unwind problem after INIT refers to the
inability to get a stack trace of the processor crash events
from a system memory dump after an INIT. After the dump is
written, and the system reboots, the expected behavior for
debuggers such as kwdb, q4, or p4 is a display of each
processor's stack trace, using the "trace event X" command.
But instead the "trace event" command fails with an
assertion failure message or unwind internal library error.
This problem exists for IPF systems only.
Defect Description:
PHKL_28720:
( SR:8606274247 CR:JAGae38324 )
Fatal MCAs are MCAs that will cause a PCI bus to be reset
thus leaving all the devices on that bus in a reset turn-on
state. When such an MCA occurs, the OS_MCA handler
cannot access any I/O devices resulting in no console
output and no crash dump taken.
The complete internal state of the system at the time
of an MCA is not being preserved by the kernel
in the crash event structures. Additionally, the
debuggers are using the incorrect unwind context
to unwind the stack after an MCA.
Resolution:
On IPF platforms, the patch will allow the correct
information to be stored in a crash dump in the case of an
MCA. The kernel fixes in this patch include changes to save
all register information to be later used by the debuggers.
This will help support engineers in analyzing problems more
effectively when they have the correct stack trace and
processor save state information.
This patch PHKL_28720 will allow PCI devices to function
enough to take a crash dump and print to the serial console
after a FATAL MCA occurs and causes PCI buses to be reset.
Restoration of the VGA console when using an ATI Radeon
based graphics card will not be supported at this time. If
a FATAL MCA occurs when using the VGA console (as in a
workstation setup) the system will perform a crash dump but
no output will be printed to the screen. Fire-GL Cards are
supported and will print to the screen. For this to work X
windows must be running and VGA the only console selected.
All serial consoles are supported.
The following dump devices will be supported when this
patch is installed (without the need for other supporting
patches):
Workstations
-----------------
On board IDE on zx2000
Add-in SCSI on zx2000 and zx6000 (A6829A, A6828A)
Add-n Fiber Channel on zx2000 and zx6000 (A6795A)
Servers
---------
Add-in SCSI on rx2600 and rx5670 (A6829A,A6828A)
Add-in Fiber Channel on rx2600 and rx5670 (A6795A)
(A6795A)
The following dump devices will be supported when this
patch is installed with the following supporting patches
(as indicated) With out any the following patches the crash
dump will not occur on the specified devices:
Workstations
-----------------
On board SCSI on zx6000 (PHSS_27990)
Servers
---------
On Board SCSI on rx2600 (PHSS_27990)
On Board SCSI on rx5670 (PHKL_28787) released 6/03
Firmware Dependencies
---------------------
For HP platforms (rx5670, rx2600, zx6000, and zx2000),
a firmware upgrade to the following version is needed
for a complete solution for the stack unwind problem.
With out this firmware update a correct stack trace may
not be obtainable.:
rx5670 - SFW 2.11 or better rx2600, zx6000,
zx2000 - SFW 1.61 or better
For HP platforms (rx5670, rx2600, and zx6000), a firmware
upgrade to the versions below are required so the systems
will not reboot before a crash dump is performed. These
firmware dependencies are only needed on systems with more
than one processor. Without upgrading to the firmware
revisions listed below the system may still suffer from
reset after an MCA, though less often if the patch were not
installed at all:
rx5670 (SFW with Madison Support) or better, released 7/03
rx2600, zx6000 - SFW 1.90 or better
Other Dependencies
------------------
Patch Dependency:
PHCO_28066 Patch adds support for Q4 and Kwdb.
These patches must be installed together.
PHKL_28093:
( SR:8606276344 CR:JAGae40422 )
On the Intel OEM i870 platform, HP-UX does not properly
initialize PCI cards that contain a bus bridge, such as
the 4 port Fast Ethernet card. They will not be seen by
HP-UX.
Resolution:
The fix was made to support the following configuration:
PCI Root Bridge
|
Built-in PCI-PCI Bridge
|
Add-on Generic PCI-PCI Bridge
|
I/O Controller
The root cause of this defect is that HP-UX assumes only
one level of PCI-to-PCI bus bridge. The 4 port Fast Ethernet
card has a PCI-to-PCI bus bridge on it, and so uncovered
two places in the HP-UX kernel that assumed one level of
bridge.
PHKL_28203:
( SR:8606276202 CR:JAGae40280 )
On IPF the complete internal state of the system at the time
of an INIT is not being preserved by the kernel in the crash
event structures. Additionally, the debuggers are using the
incorrect unwind context to unwind the stack after an INIT.
Resolution:
The kernel fixes include changes to save all register
information to be later used by the debuggers.
Enhancement:
No
SR:
8606274247 8606276202 8606276344
Patch Files:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
/usr/conf/lib/libdump-pdk.a(asm_crash.o)
/usr/conf/lib/libdump-pdk.a(mca.o)
/usr/conf/lib/libdump-pdk.a(mca_asm.o)
/usr/conf/lib/libio-pdk.a(ia64_psm.o)
/usr/conf/lib/libpci.a(p2pb_cdio.o)
/usr/conf/lib/libpci.a(pci_cdio.o)
what(1) Output:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
/usr/conf/lib/libdump-pdk.a(asm_crash.o):
asm_crash.s $Date: 2003/02/19 08:24:16 $Revision: r1
1.22/2 PATCH_11.22 (PHKL_28720)
/usr/conf/lib/libdump-pdk.a(mca.o):
mca.c $Date: 2003/02/19 08:24:16 $Revision: r11.22/1
PATCH_11.22 (PHKL_28720)
/usr/conf/lib/libdump-pdk.a(mca_asm.o):
mca_asm.s $Date: 2003/02/19 08:24:16 $Revision: r11.
22/1 PATCH_11.22 (PHKL_28720)
/usr/conf/lib/libio-pdk.a(ia64_psm.o):
ia64_psm.c $Date: 2003/02/19 08:24:16 $Revision: r11
.22/1 PATCH_11.22 (PHKL_28720)
/usr/conf/lib/libpci.a(p2pb_cdio.o):
p2pb_cdio.c $Date: 2002/10/21 09:21:40 $Revision: r1
1.22/1 PATCH_11.22 (PHKL_28093)
/usr/conf/lib/libpci.a(pci_cdio.o):
pci_cdio.c $Date: 2003/02/19 08:24:16 $Revision: r11
.22/2 PATCH_11.22 (PHKL_28720)
cksum(1) Output:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
776155804 85664 /usr/conf/lib/libdump-pdk.a(asm_crash.o)
3621983446 119440 /usr/conf/lib/libdump-pdk.a(mca.o)
1072969818 8048 /usr/conf/lib/libdump-pdk.a(mca_asm.o)
3563885995 254368 /usr/conf/lib/libio-pdk.a(ia64_psm.o)
3657876146 20544 /usr/conf/lib/libpci.a(p2pb_cdio.o)
1149294561 138416 /usr/conf/lib/libpci.a(pci_cdio.o)
Patch Conflicts: None
Patch Dependencies:
s700: 11.22: PHCO_28066
s800: 11.22: PHCO_28066
Hardware Dependencies: None
Other Dependencies:
Firmware Dependencies
---------------------
For HP platforms (rx5670, rx2600, zx6000, and zx2000),
a firmware upgrade to the following version is needed
for a complete solution for the stack unwind problem.
With out this firmware update a correct stack trace may
not be obtainable.:
rx5670 - SFW 2.11 or better rx2600, zx6000,
zx2000 - SFW 1.61 or better
For HP platforms (rx5670, rx2600, and zx6000), a firmware
upgrade to the versions below are required so the systems
will not reboot before a crash dump is performed. These
firmware dependencies are only needed on systems with more
than one processor. Without upgrading to the firmware
revisions listed below the system may still suffer from
reset after an MCA, though less often if the patch were not
installed at all:
rx5670 (SFW with Madison Support) or better, released 7/03
rx2600, zx6000 - SFW 1.90 or better
For HP platforms (rx5670, rx2600, zx6000, and zx2000),
a firmware upgrade to the following version is desirable
for a complete solution:
rx5670 - SFW 2.11 or better
rx2600, zx6000, zx2000 - SFW 1.61 or better
Supersedes:
PHKL_28203 PHKL_28093
Equivalent Patches: None
Patch Package Size: 650 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHKL_28720
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHKL_28720.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHKL_28720. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHKL_28720.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHKL_28720.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHKL_28720.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
-----End of Document ID: PHKL_28720------------------------------------------
Document ID: PHKL_28566
Date Loaded: 20030307
Title: s700_800 11.22 SCSI IO Subsystem Cumulative Patch
Patch Name: PHKL_28566
Patch Description: s700_800 11.22 SCSI IO Subsystem Cumulative Patch
Creation Date: 03/02/26
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.22
s800: 11.22
Products: N/A
Filesets:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP
Automatic Reboot?: Yes
Status: General Release
Critical:
Yes
PHKL_28566: PANIC CORRUPTION HANG
Category Tags:
defect_repair general_release critical panic halts_system
corruption manual_dependencies
Path Name: /hp-ux_patches/s700_800/11.X/PHKL_28566
Symptoms:
PHKL_28566:
( SR:8606288219 CR:JAGae52150 )
System panics with the following stack trace :
bad_news+0x580
bubbledown+0x0
c8xx_isrAbortDone+0x590
c8xx_isrUDC+0x450
c8xx_isrDIP+0x4b0
c8xx_isr+0x5f0
sapic_interrupt+0x60
external_interrupt+0x250
bubbledown+0x0
idle+0x7b0
netcall_stub+0x0
idle+0x740ubbledown
( SR:8606265839 CR:JAGae30093 )
ioscan process hangs forever during system boot-up.
( SR:8606268016 CR:JAGae32255 )
Unkillable process seen on systems without I/O
Translation Look-aside Buffers (TLBs).
( SR:8606266332 CR:JAGae30581 )
When two systems are connected in multi-initiator
configuration using A6828A or A6829A Ultra160 SCSI
cards, with I/O's happening on both systems, if one of
the systems panic, it enters into an endless reboot
loop.
( SR:8606224108 CR:JAGad93204 )
Unexpected SCSI bus resets are seen using A6828A and
A6829A Ultra160 SCSI cards connected to two systems in
multi-initiator configuration with the following
message logged in syslog:
"SCSI Gross Error on <hardware_path>"
( SR:8606265090 CR:JAGae29421 )
The following informative message is logged in the
syslog with A5150A and A5838A SCSI cards :
SCSI 896 chip: Enabling DPR workaround in CCNTL
( SR:8606262931 CR:JAGae27261 )
System panics with a spinlock deadlock message and the
following stack trace :
panic+0x14
too_much_time+0x2e0
wait_for_lock+0x14c
sl_retry+0x1c
c8xx_if_tgt_open+0x50
sctl_open+0x1370
call_open_close+0x188
opend+0x128
spec_open+0xa8
vns_copen+0x4c
vn_open+0xa8
copen+0xd0
open+0x3c
syscall+0x200
$syscallrtn+0x0
( SR:8606226043 CR:JAGad95114 )
Data integrity issues or High Priority Machine Check
(HPMC) are seen with Channel B of A5159A FWD SCSI HBA.
( SR:8606266447 CR:JAGae30695 )
Processes appear to have hung forever following an
abort request because of a bus hang condition.
Defect Description:
PHKL_28566:
( SR:8606288219 CR:JAGae52150 )
The system panicked with a Data TLB fault, because it
was trying to dereference an invalid pointer.
Resolution:
Checks have been made in the driver so that invalid
pointers are not dereferenced.
( SR:8606265839 CR:JAGae30093 )
The ioscan process hung because of a missing SCSI
interrupt.
The ioscan request and all subsequent I/O requests did
not get processed because the timer routine did not
clear a flag after it processed the previous interrupt.
Resolution:
The fix is to clear the flag in the timer routine.
( SR:8606268016 CR:JAGae32255 )
On systems without I/O TLBs, if the allocation of SCSI
Control Block (SCB) fails during the first LUN open,
then the process would remain sleeping without being
woken up ever. This resulted in the process hanging
forever.
Resolution:
The timer routine which gets called every 10 seconds is
modified to wake up any process waiting for memory.
( SR:8606266332 CR:JAGae30581 )
The system was going into an endless reboot sequence
because the initiator did not respond to the REQs sent
by the target device.
Resolution:
The driver has been modified so that the initiator
sends ACKs for the REQs received.
( SR:8606224108 CR:JAGad93204 )
When A6828A and A6829A SCSI Ultra160 cards are
connected in multi-initiator configuration, where more
than one initiator tries to arbitrate for the bus, the
card may go into hang state which can result in not
detecting the Dual Transition (DT) edge of the SCSI
clock. The card goes into hang state because the
device parameters were written into the card registers
before winning the arbitration. This results in the
SCSI Gross Error (SGE) and driver resets the SCSI bus.
Resolution:
The driver has been modified to not write the device
parameters onto the card registers when the initiator
tries to arbitrate for the bus. Only the device ID is
written to the card registers to do the arbitration.
The other parameters are set after winning the
arbitration.
( SR:8606265090 CR:JAGae29421 )
The SCSI workaround message must be printed only when
the logging level is increased.
Resolution:
The code has been modified to print the informative
message in the syslog when the logging level is
increased.
( SR:8606262931 CR:JAGae27261 )
A local variable inside a function got corrupted which
caused the function to be executed in an infinite loop.
The spinlock was held while entering the function and
hence the system panicked with a spinlock deadlock
because the lock was never released.
Resolution:
Code has been modified to prevent the variable from
getting corrupted.
( SR:8606226043 CR:JAGad95114 )
In extremely rare conditions, single byte writes to
onboard memory (SCRIPT RAM) may not complete on Channel
B of A5159A FWD SCSI HBA. This may result in the
following problems:
a. Data integrity issues
b. System crash due to HPMC.
Resolution:
The driver has been changed to perform word writes
instead of byte writes.
( SR:8606266447 CR:JAGae30695 )
When an abort request times out, currently, the driver
ignores the time-out. This could lead to process
timeouts and the process appears to have hung forever.
Resolution:
The driver code has been changed to reset the SCSI bus
if an abort request times out, to prevent aborts
happening again and again.
Enhancement:
No
SR:
8606224108 8606226043 8606262931 8606265090 8606265839
8606266332 8606266447 8606268016 8606288219
Patch Files:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
/usr/conf/lib/libwsio-pdk.a(scsi_c8xx_pdk.o)
/usr/conf/lib/libwsio.a(scsi_c8xx.o)
/usr/conf/lib/libwsio.a(scsi_ctl.o)
what(1) Output:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
/usr/conf/lib/libwsio-pdk.a(scsi_c8xx_pdk.o):
scsi_c8xx_pdk.c $Date: 2003/01/27 14:46:25 $Revision
: r11.22/1 PATCH_11.22 (PHKL_28566)
/usr/conf/lib/libwsio.a(scsi_c8xx.o):
scsi_c8xx.c $Date: 2003/01/27 14:40:45 $Revision: r1
1.22/1 PATCH_11.22 (PHKL_28566)
/usr/conf/lib/libwsio.a(scsi_ctl.o):
scsi_ctl.c $Date: 2003/01/27 14:44:43 $Revision: r11
.22/1 PATCH_11.22 (PHKL_28566)
cksum(1) Output:
OS-Core.CORE2-KRN,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
3958110997 42840 /usr/conf/lib/
libwsio-pdk.a(scsi_c8xx_pdk.o)
1558585923 384800 /usr/conf/lib/libwsio.a(scsi_c8xx.o)
459765678 387456 /usr/conf/lib/libwsio.a(scsi_ctl.o)
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
Multi-initiator support is available on Ultra160 SCSI
cards with hardware revisions later than A6828-60001
and A6829-60001.
Supersedes: None
Equivalent Patches: None
Patch Package Size: 820 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHKL_28566
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHKL_28566.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHKL_28566. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHKL_28566.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHKL_28566.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHKL_28566.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
-----End of Document ID: PHKL_28566------------------------------------------
Document ID: PHKL_28475
Date Loaded: 20030307
Title: s700_800 11.11 vPars panic; Syscall cumulative
Patch Name: PHKL_28475
Patch Description: s700_800 11.11 vPars panic; Syscall cumulative
Creation Date: 03/01/30
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.11
s800: 11.11
Products: N/A
Filesets:
OS-Core.CORE-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP
ProgSupport.C-INC,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP
Automatic Reboot?: Yes
Status: General Release
Critical:
No (superseded patches were critical)
PHKL_27172: PANIC
Category Tags:
defect_repair enhancement general_release critical panic
manual_dependencies
Path Name: /hp-ux_patches/s700_800/11.X/PHKL_28475
Symptoms:
PHKL_28475:
( SR:8606278471 CR:JAGae42529 )
Programs using swapcontext() or setcontext() can fail in a
non-deterministic manner, due to incorrect values in
general registers gr3-gr18 (the "callee-save" registers),
if passing a context generated by a call to getcontext().
PHKL_27172:
( SR:8606258396 CR:JAGae22696 )
Applications that use system calls that pass more than four
(4) arguments which worked on an earlier release of HP-UX
may improperly return an EFAULT error. This only affects
32-bit applications running on 64-bit operating systems.
( SR:8606253687 CR:JAGae18035 )
The system can panic during boot when Virtual Partitions
(vPars) are enabled. Note that this panic does not occur if
the HP-UX Virtual Partitions product is not installed and in
use.
The stack trace looks like the following:
panic: Data page fault
panic+0x6c
report_trap_or_int_and_panic+0x94
trap+0xedc
nokgdb+0x8
PHKL_26467:
( SR:8606231620 CR:JAGae00858 )
Enhancement: This product update is a member of a set
needed to enable "Release mode" functionality for
PTHREAD_PROCESS_SHARED mutexes.
The full list of product updates required for this feature
are: PHKL_26467, PHKL_26468, PHKL_26469 and PHCO_26466.
If any member of this set of product updates is not
installed, this product update will have no impact on
your system.
PHKL_26240:
( SR:8606178913 CR:JAGad48138 )
Obtaining complete filesystem mount information can be a
performance problem for some applications on systems having
a large number of mounts.
( SR:8606232147 CR:JAGae01383 )
Enhancement: This product update is member of a set needed
to improve the performance of application using shared
mutexes. Performance of a PTHREAD_PROCESS_SHARED mutex
unlock operation is slower than that of a
PTHREAD_PROCESS_PRIVATE mutex, even in the non-contended
(i.e., no waiters) case.
The full list of product updates required for this feature
are: PHKL_26316, PHKL_26240, and PHCO_25751.
If any member of this set of product updates is not
installed, this product update will have no impact on your
system.
PHKL_26042:
( SR:8606230908 CR:JAGae00146 )
This change provides pre-enablement of the Direct Register
Access feature.
This change will have no impact on your system until Direct
Register Access is fully enabled.
Defect Description:
PHKL_28475:
( SR:8606278471 CR:JAGae42529 )
According to the C runtime rules, the callee-save
registers will always have their original values upon
return from the kernel system call. However, these values
are not copied into the kernel where they can be provided
to getcontext(). Consequently, getcontext() cannot place
the correct values in the user ucontext structure, and
setcontext()/swapcontext() cannot restore them. The
program proceeds with incorrect values and fails in a
non-deterministic manner.
Resolution:
The system call entry path now copies these register
values so that getcontext() can retrieve them. The system
call return path now reloads these registers for
setcontext() (or swapcontext()) calls. This ensures these
registers have the same value as at the time the
application called getcontext(), and resolves the
failures.
PHKL_27172:
( SR:8606258396 CR:JAGae22696 )
When 32-bit applications invoke system calls having more
than four arguments on 64-bit kernels, these fifth, sixth,
etc., arguments are stored in the outgoing parameters area
of the caller's stack frame. There are situations where a
register used to calculate the pointer to the arguments
could have some residual left over bits in the high order
32-bits that will result in problems when attempting to
retrieve those arguments. These extraneous bits create an
address that is outside the range of the 32-bit address
space causing the EFAULT.
Resolution:
Mask off the upper 32-bits of the system call's argument(s)
pointer.
( SR:8606253687 CR:JAGae18035 )
The system can panic upon invoking the first 32-bit system
call after the kernel is booted because the system call
initialization path attempts to reference the per-processor
data before the processor is set to wide mode.
Resolution:
Enable the wide 64-bit address mode before any data
reference is done.
PHKL_26467:
( SR:8606231620 CR:JAGae00858 )
This product update contains minor enhancements
required to enable the "Release mode" functionality
for PTHREAD_PROCESS_SHARED mutexes.
Resolution:
This product update provides support for a new system
call interface, used internally by the POSIX
thread library to support release mode for
PTHREAD_PROCESS_SHARED mutexes.
PHKL_26240:
( SR:8606178913 CR:JAGad48138 )
The existing system call to obtain lists of filesystems
mounted returns information for one mount at a time. The
overhead in making this call, and obtaining kernel locks,
can be quite high, and contend with other system activity.
Resolution:
Provide a new system call which returns information for
multiple mounts with each call (rather than one per call).
This patch provides the new system call hooks. (Patch
PHKL_26239, also required for this performance improvement,
provides the new system call content.)
( SR:8606232147 CR:JAGae01383 )
In the PTHREAD_PROCESS_SHARED mutex case, the unlock
operation always makes a system call to synchronize with
threads in other processes which may be waiting for the
mutex. This makes the code path significantly longer.
Resolution:
To increase shared mutex performance in the non-contended
(i.e., no waiters) case, this change adds a new light weight
system call to be used in place of the regular system call
in the unlock operation. This is entirely transparent to
the applications. It greatly reduces the transition time
between kernel and user space. If waiters are detected,
the light weight call will transfer into the regular system
call path for proper handling. Thus, this performance
enhancement is effective only for shared mutexes which do
not experience heavy contention. (PHKL_26316, also
required for this enhancement, adapts the existing system
call which handles waiters of shared mutexes to coordinate
with the light weight call. PHCO_25751, also
required for this enhancement, adapts the libpthread
library to use the new light weight system call.)
PHKL_26042:
( SR:8606230908 CR:JAGae00146 )
This change contains minor enhancements required to
pre-enable the Direct Register Access feature.
Resolution:
Provide a new Light Weight System call providing Direct
Register Access.
Enhancement:
No (superseded patches contained enhancements)
PHKL_28475:
Enhancements were delivered in a patch this one has
superseded. Please review the Defect Description
text for more information.
SR:
8606178913 8606230908 8606231620 8606232147 8606253687
8606258396 8606278471
Patch Files:
OS-Core.CORE-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP:
/usr/conf/sys/scall_define.h
ProgSupport.C-INC,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP:
/usr/include/sys/scall_define.h
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP:
/usr/conf/lib/libscall-pdk.a(asm_scall.o)
/usr/conf/lib/libscall-pdk.a(gateway.o)
/usr/conf/lib/libscall-pdk.a(lw_scall.o)
/usr/conf/lib/libscall-pdk.a(pdk_syscall.o)
/usr/conf/lib/libscall-pdk.a(scall_stubs.o)
/usr/conf/lib/libscall.a(init_sent.o)
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP:
/usr/conf/lib/libscall-pdk.a(asm_scall.o)
/usr/conf/lib/libscall-pdk.a(gateway.o)
/usr/conf/lib/libscall-pdk.a(lw_scall.o)
/usr/conf/lib/libscall-pdk.a(pdk_syscall.o)
/usr/conf/lib/libscall-pdk.a(scall_stubs.o)
/usr/conf/lib/libscall.a(init_sent.o)
what(1) Output:
OS-Core.CORE-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP:
/usr/conf/sys/scall_define.h:
None
ProgSupport.C-INC,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP:
/usr/include/sys/scall_define.h:
None
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP:
/usr/conf/lib/libscall-pdk.a(asm_scall.o):
asm_scall.s $Date: 2003/01/08 11:46:45 $Revision: r1
1.11/3 PATCH_11.11 (PHKL_28475)
/usr/conf/lib/libscall-pdk.a(gateway.o):
gateway.s $Date: 2002/03/12 11:44:15 $Revision: r11.
11/3 PATCH_11.11 (PHKL_26467)
/usr/conf/lib/libscall-pdk.a(lw_scall.o):
lw_scall.s $Date: 2002/06/24 11:20:09 $Revision: r11
.11/5 PATCH_11.11 (PHKL_27172)
/usr/conf/lib/libscall-pdk.a(pdk_syscall.o):
pdk_syscall.c $Date: 2002/06/24 11:20:45 $Revision:
r11.11/2 PATCH_11.11 (PHKL_27172)
/usr/conf/lib/libscall-pdk.a(scall_stubs.o):
scall_stubs.s $Date: 2002/03/12 11:44:48 $Revision:
r11.11/3 PATCH_11.11 (PHKL_26467)
/usr/conf/lib/libscall.a(init_sent.o):
init_sent.c $Date: 2002/03/12 11:43:13 $Revision: r1
1.11/3 PATCH_11.11 (PHKL_26467)
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP:
/usr/conf/lib/libscall-pdk.a(asm_scall.o):
asm_scall.s $Date: 2003/01/08 11:46:45 $Revision: r1
1.11/3 PATCH_11.11 (PHKL_28475)
/usr/conf/lib/libscall-pdk.a(gateway.o):
gateway.s $Date: 2002/03/12 11:44:15 $Revision: r11.
11/3 PATCH_11.11 (PHKL_26467)
/usr/conf/lib/libscall-pdk.a(lw_scall.o):
lw_scall.s $Date: 2002/06/24 11:20:09 $Revision: r11
.11/5 PATCH_11.11 (PHKL_27172)
/usr/conf/lib/libscall-pdk.a(pdk_syscall.o):
pdk_syscall.c $Date: 2002/06/24 11:20:45 $Revision:
r11.11/2 PATCH_11.11 (PHKL_27172)
/usr/conf/lib/libscall-pdk.a(scall_stubs.o):
scall_stubs.s $Date: 2002/03/12 11:44:48 $Revision:
r11.11/3 PATCH_11.11 (PHKL_26467)
/usr/conf/lib/libscall.a(init_sent.o):
init_sent.c $Date: 2002/03/12 11:43:13 $Revision: r1
1.11/3 PATCH_11.11 (PHKL_26467)
cksum(1) Output:
OS-Core.CORE-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP:
1590940645 21710 /usr/conf/sys/scall_define.h
ProgSupport.C-INC,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP:
1590940645 21710 /usr/include/sys/scall_define.h
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP:
3485289930 9524 /usr/conf/lib/libscall-pdk.a(asm_scall.o)
1806665573 7336 /usr/conf/lib/libscall-pdk.a(gateway.o)
1457731577 6468 /usr/conf/lib/libscall-pdk.a(lw_scall.o)
3647372443 2384 /usr/conf/lib/libscall-pdk.a(pdk_syscall.o)
1252207800 1500 /usr/conf/lib/libscall-pdk.a(scall_stubs.o)
1999675199 36600 /usr/conf/lib/libscall.a(init_sent.o)
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP:
130784508 11576 /usr/conf/lib/libscall-pdk.a(asm_scall.o)
3605248680 46848 /usr/conf/lib/libscall-pdk.a(gateway.o)
4099012366 11360 /usr/conf/lib/libscall-pdk.a(lw_scall.o)
2965220215 5848 /usr/conf/lib/libscall-pdk.a(pdk_syscall.o)
960607575 142576 /usr/conf/lib/libscall-pdk.a(scall_stubs.o)
3170408596 141224 /usr/conf/lib/libscall.a(init_sent.o)
Patch Conflicts: None
Patch Dependencies:
s700: 11.11: PHKL_28474
s800: 11.11: PHKL_28474
Hardware Dependencies: None
Other Dependencies:
PHKL_26467: To enable the process shared mutex performance,
the following must be installed: PHKL_26467, PHKL_26468,
PHKL_26469 and PHCO_26466. These product updates may be
installed in any order. If any of these product updates are
not installed, this product update will have no impact on
your system.
PHKL_26240: To enable the pthread shared mutex performance
enhancement related to JAGae01383, the following must be
installed: PHKL_26240, PHKL_26316, and PHCO_25751 In order
to realize a performance improvement in obtaining mount
information related to JAGad48138, PHKL_26239 must also be
installed.
Supersedes:
PHKL_27172 PHKL_26467 PHKL_26240 PHKL_26042
Equivalent Patches: None
Patch Package Size: 510 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHKL_28475
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHKL_28475.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHKL_28475. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHKL_28475.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHKL_28475.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHKL_28475.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
-----End of Document ID: PHKL_28475------------------------------------------
Document ID: PHKL_28474
Date Loaded: 20030307
Title: s700_800 11.11 signal cumulative patch
Patch Name: PHKL_28474
Patch Description: s700_800 11.11 signal cumulative patch
Creation Date: 03/01/30
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.11
s800: 11.11
Products: N/A
Filesets:
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP
Automatic Reboot?: Yes
Status: General Release
Critical:
No (superseded patches were critical)
PHKL_27283: ABORT
Category Tags:
defect_repair general_release critical halts_system
Path Name: /hp-ux_patches/s700_800/11.X/PHKL_28474
Symptoms:
PHKL_28474:
( SR:8606278471 CR:JAGae42529 )
Programs using swapcontext() or setcontext() can fail in a
non-deterministic manner, due to incorrect values in
general registers gr3-gr18 (the "callee-save" registers),
if passing a context generated by a call to getcontext().
PHKL_27283:
( SR:8606259602 CR:JAGae23920 )
Applications which are compiled for the 32-bit data model
and run on a 64-bit kernel can sometimes abort with the
messages: "Pid <nnn> killed due to trashed stack. Pid <nnn>
was killed due to failure in writing the signal context."
In most cases, the application was compiled with +O2
optimization or uses alloca(3C) with a computed size
argument.
Defect Description:
PHKL_28474:
( SR:8606278471 CR:JAGae42529 )
According to the C runtime rules, the callee-save
registers will always have their original values upon
return from the kernel system call. However, these values
are not copied into the kernel where they can be provided
to getcontext(). Consequently, getcontext() cannot place
the correct values in the user ucontext structure, and
setcontext()/swapcontext() cannot restore them. The
program proceeds with incorrect values and fails in a
non-deterministic manner.
Resolution:
A new flag has been added to setcontext() to trigger the
system call return path to reload the "callee-save"
registers.
PHKL_27283:
( SR:8606259602 CR:JAGae23920 )
The problem is that the upper half of the 64-bit stack
pointer can sometimes contain non-zero data (e.g., due to
overflows in calculating the size argument for alloca(); or
due to optimizer use of the upper half of the register for
temporary storage). This causes the kernel to make invalid
references to the user stack, resulting in program aborts.
Resolution:
For 32-bit programs, the kernel will now use only the lower
half of the stack pointer register, which is the correct and
complete address.
Enhancement:
No
SR:
8606259602 8606278471
Patch Files:
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP:
/usr/conf/lib/libpm-pdk.a(pm_sendsig.o)
/usr/conf/lib/libpm.a(pm_context.o)
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP:
/usr/conf/lib/libpm-pdk.a(pm_sendsig.o)
/usr/conf/lib/libpm.a(pm_context.o)
what(1) Output:
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP:
/usr/conf/lib/libpm-pdk.a(pm_sendsig.o):
pm_sendsig.c $Date: 2003/01/08 11:47:07 $Revision: r
11.11/2 PATCH_11.11 (PHKL_28474)
/usr/conf/lib/libpm.a(pm_context.o):
pm_context.c $Date: 2003/01/08 11:46:42 $Revision: r
11.11/1 PATCH_11.11 (PHKL_28474)
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP:
/usr/conf/lib/libpm-pdk.a(pm_sendsig.o):
pm_sendsig.c $Date: 2003/01/08 11:47:07 $Revision: r
11.11/2 PATCH_11.11 (PHKL_28474)
/usr/conf/lib/libpm.a(pm_context.o):
pm_context.c $Date: 2003/01/08 11:46:42 $Revision: r
11.11/1 PATCH_11.11 (PHKL_28474)
cksum(1) Output:
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_32,v=HP:
4274735735 20900 /usr/conf/lib/libpm-pdk.a(pm_sendsig.o)
1711563478 3068 /usr/conf/lib/libpm.a(pm_context.o)
OS-Core.CORE2-KRN,fr=B.11.11,fa=HP-UX_B.11.11_64,v=HP:
3199018606 51400 /usr/conf/lib/libpm-pdk.a(pm_sendsig.o)
446296294 6936 /usr/conf/lib/libpm.a(pm_context.o)
Patch Conflicts: None
Patch Dependencies:
s700: 11.11: PHKL_28475
s800: 11.11: PHKL_28475
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHKL_27283
Equivalent Patches: None
Patch Package Size: 110 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHKL_28474
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHKL_28474.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHKL_28474. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHKL_28474.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHKL_28474.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHKL_28474.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
-----End of Document ID: PHKL_28474------------------------------------------
Document ID: PHCO_28597
Date Loaded: 20030307
Title: s700_800 11.22 iconv cumulative patch
Patch Name: PHCO_28597
Patch Description: s700_800 11.22 iconv cumulative patch
Creation Date: 03/02/25
Post Date: 03/03/07
Hardware Platforms - OS Releases:
s700: 11.22
s800: 11.22
Products: N/A
Filesets:
International.CHINESES,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,v=HP
OS-Core.CMDS-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,v=HP
OS-Core.CMDS2-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHCO_28597
Symptoms:
PHCO_28597:
( SR:8606294926 CR:JAGae58623 )
iconv does not support some JVC aliases
( SR:8606292044 CR:JAGae55808 )
iconv does not handle null (0x00) character
when converting between gb18030 and ucs2 (unicode).
Defect Description:
PHCO_28597:
( SR:8606294926 CR:JAGae58623 )
some aliases missing from config.iconv for JVC locales.
Resolution:
added missing aliases in config.iconv.
( SR:8606292044 CR:JAGae55808 )
mapping of null character is missing from
gb18030=ucs2 and ucs2=gb18030 converter tables.
Resolution:
added missing code point (0x00) to converter tables.
Enhancement:
No
SR:
8606292044 8606294926
Patch Files:
International.CHINESES,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,
v=HP:
/usr/lib/nls/iconv/tables.1/gb18030=ucs2
/usr/lib/nls/iconv/tables.1/ucs2=gb18030
OS-Core.CMDS-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,v=HP:
/usr/lib/nls/iconv/config.iconv
OS-Core.CMDS2-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
/usr/lib/nls/iconv/hpux32/config.iconv
/usr/lib/nls/iconv/hpux64/config.iconv
what(1) Output:
International.CHINESES,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,
v=HP:
/usr/lib/nls/iconv/tables.1/gb18030=ucs2:
None
/usr/lib/nls/iconv/tables.1/ucs2=gb18030:
None
OS-Core.CMDS-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,v=HP:
/usr/lib/nls/iconv/config.iconv:
None
OS-Core.CMDS2-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
/usr/lib/nls/iconv/hpux32/config.iconv:
None
/usr/lib/nls/iconv/hpux64/config.iconv:
None
cksum(1) Output:
International.CHINESES,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,
v=HP:
1146109721 508004 /usr/lib/nls/iconv/tables.1/gb18030=ucs2
352004952 508004 /usr/lib/nls/iconv/tables.1/ucs2=gb18030
OS-Core.CMDS-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA/PA,v=HP:
2398764152 29597 /usr/lib/nls/iconv/config.iconv
OS-Core.CMDS2-AUX,fr=B.11.22,fa=HP-UX_B.11.22_IA,v=HP:
277224314 29597 /usr/lib/nls/iconv/hpux32/config.iconv
277224314 29597 /usr/lib/nls/iconv/hpux64/config.iconv
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes: None
Equivalent Patches:
PHCO_28134:
s700: 11.11
s800: 11.11
Patch Package Size: 1110 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_28597
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHCO_28597.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHCO_28597. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHCO_28597.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHCO_28597.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_28597.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
-----End of Document ID: PHCO_28597------------------------------------------
Document ID: PHSS_28332
Date Loaded: 20030306
Title: s700_800 11.X OV OB4.10 patch - CC packet
Patch Name: PHSS_28332
Patch Description: s700_800 11.X OV OB4.10 patch - CC packet
Creation Date: 03/02/28
Post Date: 03/03/06
Hardware Platforms - OS Releases:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Products:
OmniBackII A.04.10
Filesets:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,v=HP
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release manual_dependencies
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_28332
Symptoms:
PHSS_28332:
Id = HSLco36395 SR: H555008639
Kanji "month" character is not displayed correctly in
the scheduler calendar control.
Id = HSLco36502 SR: H555008659
OmniBack II user is not able to change and save the
schedule-time specification of a backup datalist.
Id = HSLco37193 SR: H555008807
When backing up SAP integration with EMC split mirror
functionality, not all the SAP files are backed up.
Id = HSLco38141 SR: H555009022
Missing barcode from original media.
Id = HSLco38201 SR: H555009033
GUI is unable to select Lotus object backup version
for restore.
Id = HSLco38335 SR: H555009064
Japanese OmniBack II GUI displays truncated database
session messages.
Id = HSLco38443 SR: H555009111
GUI abnormally ends when accessing OmniBack II
event log.
Id = HSLco38505 SR: H555009147
Switching to Instant Recovery context randomly
displays some other context, when Cell Manager
is not configured for XP.
Id = HSLco38889 SR: H555009228
When creating a NDMP backup datalist, no valid hosts
can be selected to run pre/post-exec script in GUI.
Id = HSLco39130 SR: H555009286
Catalog binary file is deleted if original medium with
copy is recycled or exported. Importing the catalog
from copy medium is not possible.
Id = HSLco39326 SR: H555009339
Excluded directories are reselected in restore
context.
Id = HSLco39486 SR: H555009404
GUI started with "xomni -restore -debug 1-99"
ends abnormally when Informix server option in
Restore context is selected.
Id = HSLco39892 SR: H555009570
GUI does not allow blank hostname for local
pre/post-exec script.
Id = JAGae19133 SR: 8606254802
"BalanceNone"' option for SAP integration does
not work from GUI.
PHSS_27588:
Id = HSLco33238 SR:H555007372
Multiple messages:
"Memory copy mode activated"
appear in the session output during MS SQL backup
with the Fast Direct mode enabled.
Id = HSLco34581 SR:H555007993
"devbra" returns 'rewind on close' devices.
Id = HSLco35611 SR:H555008476
Restore GUI can not handle two separate Oracle7
database with the same SID. GUI does not display
all objects versions.
Id = HSLco36219 SR:H555008624
When viewing sessions in database context and then
switching context, GUI ends abnormally.
Id = HSLco36343 SR:H555008636
Statistics for DCBF directory are incorrect in GUI.
Id = HSLco36478 SR:H555008657
While attempting to restore an Informix Backup
GUI ends abnormally.
Id = HSLco36526 SR:B555014660
Sanconf does not distinguish between tape devices
having serial numbers longer than 10 digits.
Id = HSLco36751 SR:H555008700
Move client operation does not move the client from
one cell to another but returns the message that
selected client exists in all cells.
Id = HSLco36798 SR:H555008715
GUI does not respond when view is clicked in main menu.
Id = HSLco36983 SR:H555008752
Fields on notification page disappear after switching
contexts.
Id = HSLco36986 SR:H555008754
Report "Extended report on used media" gives wrong info
about used media in selected timeframe.
Id = HSLco36988 SR:H555008755
When saving a XP datalist or barlist created through
the GUI, the following message pops up:
"This backup will not start because the SureStore
Disk Array XP license is not available.".
Id = HSLco36998 SR:H555008757
When filesystem is chosen for restore error message
pops up:
"error: Error details unknown.".
Id = HSLco37094 SR:H555008779
Notifications script can be run from anywhere even
with ExternalScriptMode set to 1.
Id = HSLco37174 SR:H555008803
Menu item /Tools/Database Administration is grayed
out in MOM GUI.
Id = HSLco37359 SR:H555008849
OmniBack II GUI abnormally ends on exit.
Id = HSLco37939 SR:H555008927
While configuring OmniBack II reports using GUI only
datalists are listed (barlists are missing).
Id = JAGae12418 SR:8606245960
Backup GUI displays selection, which is inconsistent
with datalist.
Id = JAGae27939 SR:8606263614
GUI session restore picks the last version of file.
Id = JAGae36127 SR:8606271949
MS Exchange 2000 objects are not shown.
PHSS_26878:
Id = HSLco31458 SR:H555006839
When using "omnir -rawdisk", the following is reported:
"[Warning] From: RSM<host> "" Time:<time>
Following trees from <host>: <Label> session <ID>
were not found in database:
ToSection=Section".
Id = HSLco33515 SR:H555007485
After using CLI command omnimm -chkfreemedia
the following messages are logged in the debug.log
file:
"06/13/01 12:00:01 OMNIMM.10542.0
["lib/cmn/obstr.c /main/17":187] A.04.00 b364
StrToUserSessionId: "0": not in correct format
06/13/01 12:00:01 OMNIMM.10542.0
["lib/cmn/obstr.c /main/17":428] A.04.00 b364
StrFromObjectName: "Default LTO": no host/mpoint
delimiter"
Id = HSLco33578 SR:H555007518
Description and Location fields in select media dialog
box do not allow wildcards.
Id = HSLco33579 SR:H555007519
When browsing pre-allocation media list only hexID and
label are displayed. Other properties are missing.
Id = HSLco33645 SR:H555007546
"Point in time restore" restore option of
Transaction log backup in OmniBack II MSSQL
integration is not limited.
Id = HSLco33767 SR:H555007591
GUI crashes during browsing SQL 7 restore objects.
Id = HSLco34046 SR:H555007697
When device different from original device is selected
for restore, device is not changed and original device
is used for restore.
Id = HSLco34166 SR:H555007748
OmniBack II SSEA integration option
"Keep Version available for Instant Restore" for
Continuous Access XP and Combined
(Continuous Access XP + Business Copy XP)
is not supported, but is selectable.
Id = HSLco34174 SR:H555007752
"omnicellinfo -dlobj" ends abnormally.
Id = HSLco34683 SR:H555008049
If xomni is started with -cde option, characters on
tabs in the results area are not readable.
Id = JAGad92807 SR:8606223711
The current link in the Info menu is labeled
'OmniBack II FAQ' and it points to:
http://ovweb3.external.hp.com/ovfaq
Id = NSMbb44613 SR:B555013242
The OmniBack II GUI startup performance is poor
on HP-UX systems.
Id = HSLco34610 SR:H555008004
When GUI does not get MSSQL instances properly and user
enters the instance manually by typing, GUI instead of
proceeding asks for instance configuration.
Id = HSLco34641 SR:H555008020
"Restore to another instance field" is missing in
SQL 2000 restore context.
Id = HSLco35458 SR:H555008431
MOM GUI does not display users.
Id = HSLco35714 SR:H555008510
SAP restore objects are not displayed.
Id = HSLco35716 SR:H555008511
Data protection and catalog protection date for same
object differs for one day.
Id = HSLco35943 SR:H555008559
After modifying OBII 3.5 Oracle8 barlist using the
4.x GUI, RMAN script gets corrupted.
PHSS_26342:
Id = HSLco31198 SR: H555006778
Restore of Oracle7 database to a different host
(backup host and target host are not the same)
fails with the following error message:
"grep: can't open
/etc/opt/omni/oracle/rcs/<Oracle_Sid>.rcs"
Id = HSLco31665 SR: H555006875
When files are selected for restore and restore is
started, RSM reports:
"Error starting VBDA <DATALIST_NAME> on <computer>:
Maximum number of files/directories specified
=> DA will not be started.
Try to specify less files/directories and
restart backup."
Id = HSLco31733 SR: H555006893
Additional dates added to periodic backup schedule
after 13 months.
Id = HSLco31949 SR: H555006942
OmniBack II A.04.10 GUI abnormally ends when trying to
connect to OmniBack II A.04.00 Cell Manager.
Id = HSLco32409 SR: H555007048
GUI shows incorrect number of SQL objects for the
system.
Id = JAGad95458 SR: 8606226389
Compress option for the SAP integration in GUI is
enabled.
Id = HSLco32637 SR:H555007125
Printing in OmniBack II 4.x HP-UX GUI does not work.
Id = HSLco32864 SR:H555007211
Linux clients can not be updated from GUI.
Id = HSLco32873 SR:H555007218
If you try to restore files in interval that does not
include full backup the following error appears:
"DB unknown error".
Id = HSLco33095 SR:H555007294
Device wizard text update is not working on HPUX 4.X
GUI.
Id = HSLco33471 SR:H555007472
Split pre-exec and post-exec scripts in the EMC
integration are grayed out.
Id = JAGae02797 SR:8606233574
Comments can not be added to RMAN script via OmniBack
if '#' is specified before comment.
Id = HSLco31357 SR:H555006818
GUI crashes during object messages check.
Id = HSLco31031 SR:H555006752
During client upgrade it is not possible to
automatically select all the hosts for the same
Installation Server.
Defect Description:
PHSS_28332:
Id = HSLco36395
Font used in the scheduler calendar control has
incorrectly set locale information.
Resolution:
Font's locale information is correctly set.
Id = HSLco36502
OmniBack II user, with only "Start backup specification"
user right, is not able to change and save the
schedule-time specification of a backup datalist.
Resolution:
New global variable "SaveScheduleAllowed" is added
and it works in combination with "Start backup
specification" user right. Default value is 0 and
it is usual interface behavior. If value is set to 1,
"SaveScheduleAllowed=1", during saving datalist error
message is still displayed, but the schedule is saved.
Id = HSLco37193
In split mirror environment with huge SAP databases
it can happen that the size of the message buffer
OmniBack II uses is too small to receive complete list
of SAP files to be backed up.
Resolution:
Setting the OB2IPCBUFSIZE environment variable in the
/opt/omni/.omnirc file on Cell Server, R1 and R2 hosts,
specifying the desired amount of memory to be used for
the buffer solves the described problem.
Please read the following instructions and make sure
that the patches listed in "Other Dependencies" section
(see below) are installed and the environment
variable is set on Cell Server, R1 and R2 systems before
running the backup!
How to determine the buffer size?
---------------------------------
N_obj: number of objects (files)
N_fs: number of file systems
N_lvmvg: number of volume groups
N_dg: number of disk groups
N_rdsk: number of rawdisks
Obj: Object Name
ObjBack: Object Backup Name
MntPathLen: Path name on backup (R2) host
(example: /var/opt/omni/tmp/App_host)
fsmnt: File System Mount Point
fsdev: File System Device File
(example: /dev/dsk/[c0t1d1,lvol1])
vg: Volume group
(ex: /dev/vg01)
dg: Disk group (VxVM) - dependence on mapfile
which is required for creating disk group
(example:/dev/vx/dsk/dg01)
rdsk: Raw disk file name
(example: /dev/rdsk/c1t1d1)
AvgLen_<xxx> average length of <xxx>
There are two different buffers used:
1. BSM <-> R1
2. R1 <-> R2
Calculating the BSM <-> R1 buffer size
--------------------------------------
MsgSize_BSM_R1 = N_obj * (AvgLen_Obj + 1 + MntPathLen)
Calculating the R1 <-> R2 buffer size
-------------------------------------
MsgSize_R1_R2 =
N_obj*(AvgLen_Obj+1+AvgLen_ObjBack) +
N_fs*(AvgLen_fsmnt*2 + MntPathLen + AvgLen_fsdev*2)+
N_lvmvg*(AvgLen_vg*2) + N_dg*(AvgLen_dg*2) +
N_rdsk*(AvgLen_rdsk*2)
Calculating the OB2IPCBUFSIZE value
-----------------------------------
OB2IPCBUFSIZE > max (MsgSize_BSM_R1, MsgSize_R1_R2)
RESTORE NOTE:
-------------
If restore is started using the sapbda utility,
the variable OB2IPCBUFSIZE must be exported to
environment prior to starting sapbda.
Known problems:
---------------
If the calculated variable OB2IPCBUFSIZE is correctly
set, but is still too small for the file list to fit
into the message buffer, the session will fail with
the following error seen in the report:
BR295I Splitting mirror disks...
BR280I Time stamp <time>
BR279E Return code from '/opt/omni/lbin/ob2smbsplit
/<sap_homedir_path>/.<filename>.lst': 2
BR299E Split/resynchronization of mirror disks failed
In this case the variable OB2IPCBUFSIZE must be
recalculated to appropriate value. See above how to
determine it.
Part of SSPUX410_033.
Id = HSLco38141
Report for original medium does not contain barcode
information.
Resolution:
Barcode information is correctly displayed.
Id = HSLco38201
Lotus object versions are not correctly stored in the
Internal Database which prevents GUI to find them.
Resolution:
Record structure containing information about the Lotus
object versions is changed.
Id = HSLco38335
The length of database session messages in Japanese
version of OmniBack II is incorrectly determined.
Resolution:
New function was added to determine the message
length.
Id = HSLco38443
OmniBack II calls FormatMessage function with two
instead of three parameters that accesses uninitialized
memory.
Resolution:
Third parameter is added.
Id = HSLco38505
Instead of Instant Recovery context GUI randomly
initializes some other context. When Cell Manager
is configured for XP, everything works properly.
Resolution:
Instant Recovery context is unconditionally initialized.
Id = HSLco38889
Pre/post-exec script hosts selection does not contain
the appropriate hosts when creating a NDMP datalist.
Resolution:
NDMP pre/post-exec script host selection is corrected
to display the appropriate hosts.
Id = HSLco39130
When Recycling or exporting original medium from
OmniBack II database purge deletes Detail Catalog
Binary Files (DCBF) even if the copy medium is still
protected in the OmniBack II database. In addition
importing catalog from copy is not possible.
Resolution:
Catalog import from copy medium is possible.
Part of SSPUX410_053.
Id = HSLco39326
When object version is changed, all tree sub items
are marked again and all excludes are deleted.
Resolution:
All explicit excludes are left in restore tree after
changing object version.
Id = HSLco39486
DbgPlain function is called with wrong string format.
Resolution:
String format for DbgPlain() is corrected.
Id = HSLco39892
There was not blank string in the "On-Client" combo box.
Resolution:
Blank string is added to combo box context and handling
with this option is added to the algorithm for making
a data list.
Id = JAGae19133
From OmniBack II A.04.00 onwards, 'BalanceNone' is
obsoleted and changed to 'BalanceLoad'.
Resolution:
'BalanceNone' option for SAP integration is implemented
again in GUI.
PHSS_27588:
Id = HSLco33238
MS SQL backup using Fast Direct mode results as
"proper backup", but there are too many messages.
Resolution:
Only one message of type:
"[Normal] From: BMA<hostname> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
Memory copy mode activated."
per Backup Media Agent (BMA) is displayed.
Id = HSLco34581
In case that "st_san_safe" kernel parameter is enabled,
system cannot work with 'rewind on close' devices.
So "devbra" is returning devices which are not usable.
Resolution:
"devbra" is changed in order to return
'non-rewind on close' devices.
Id = HSLco35611
GUI does not check on which host Oracle7 database is
backed up and all backup versions are appended to
the first one found.
Resolution:
Host matching and object version adding to list is
improved.
Id = HSLco36219
Problem occurs when there are a lot of sessions or
when there are a lot of tree nodes in scoping pane.
Resolution:
Tree control in scoping pane is dynamically collapsed
before context is switched.
Part of SSPUX410_034
Id = HSLco36343
GUI reports incorrect statistics for DCBF directory.
Resolution:
GUI is improved in order to report correct
statistics for DCBF directory.
Id = HSLco36478
Incorrect indirection operator is used.
Resolution:
Indirection operator is used correctly.
Id = HSLco36526
Devbra and sanconf are limited to 10 character serial
numbers only. When there are devices with 12 digit
SN detected, devbra truncates the last two digits.
As a result, several physical devices are then treated
as one and the same device.
Resolution:
Devbra is using all digits of the device SN to
distinguish between devices.
Part of SSPUX410_040.
Id = HSLco36751
List of clients residing in the destination cell
server is not updated.
Resolution:
List of clients residing in the destination cell
server is now properly updated.
Id = HSLco36798
After installation of SSPUX410_024 or SSPUX410_029,
GUI goes into infinite loop when view is clicked in
main menu.
Resolution:
Additional activation checking is added in users
context.
Id = HSLco36983
During second initialization of combo box an error
occurs while retrieving datalist and leaving the rest
of the fields uninitialized.
Resolution:
Fields on notification page do not disappear after
switching contexts.
Id = HSLco36986
OmniBack II does not properly create list of sessions
for used media in selected timeframe.
Resolution:
"Extended report on used media" report is removed from
reporting.
Id = HSLco36988
GUI never looks for the new 1TB XP license, but always
looks for the old XP standard license. The same is with
the new 1TB EMC license.
Resolution:
GUI also looks for the new 1TB EMC and 1TB XP licenses.
Id = HSLco36998
The cause for the error message is refreshing of media
tab. While refreshing it tries to retrieve object
versions of subfolders, which were not clicked, hence
not initialized.
Resolution:
GUI now searches only folders which have object
versions initialized.
Id = HSLco37094
Script can be run from anywhere because omnirpt does
not check the global options file.
Resolution:
Omnirpt was changed and now it checks the global
options file for ExternalScriptMode entry.
Id = HSLco37174
GUI expects "start backup" instead of "monitor" user
rights for starting Database context GUI.
Resolution:
GUI now checks "monitor" user rights for showing
/Tools/Database Administration menu item.
Id = HSLco37359
OmniBack II GUI abnormally ends on exit, when
there are two "Schedule" tabs opened at a time.
Resolution:
OmniBack II GUI ends normally.
Id = HSLco37939
Barlists are members of a group which is not displayed
under reporting group in GUI Reporting.
Resolution:
Barlists are moved to a group that is displayed in GUI.
Id = JAGae12418
GUI is not able to handle nested mount points.
When GUI receives excluded directory from datalist
file it assumes that the part of the string between
first and second slash represents mount point.
Besides this, mount point is shown in GUI as a
mountpoint and as directory.
Resolution:
GUI is aware of nested mountpoints.
Id = JAGae27939
Even though session selected for restore is not the
last one, GUI will pick the latest version of file
for restore.
Resolution:
Version selection mechanism is fixed.
Id = JAGae36127
"omnidb" options "-msese" and "-msexchange" do not show
MS Exchange 2000 objects.
Resolution:
New "omnidb -msese" option is implemented.
PHSS_26878:
Id = HSLco31458
Restore Session Manager in integration protocol is
changed and omnir is not updated correctly.
Resolution:
omnir is corrected.
Id = HSLco33515
After using CLI command omnimm -chkfreemedia
inappropriate messages are logged in the debug.log
file.
Resolution:
Inappropriate messages are no longer logged in the
debug.log file.
Id = HSLco33578
Description and Location fields in the Select Media
dialog box do not allow wildcards.
Resolution:
Description and Location fields in the Select Media
dialog box now support wildcards.
Id = HSLco33579
Message handler for device medium object does not
parse MS_GETTEXT message correctly. Therefore
pre-allocation list does not display all the data.
Resolution:
Message parsing in device medium object improved.
Id = HSLco33645
"Point in time restore" restore option of
Transaction log backup in OmniBack II MSSQL
integration is not limited.
Resolution:
"Point in time restore" restore option is limited by
the backups. The maximum time is limited by start of
backup session selected for restore. The minimum time
is limited by first previous full or differential
backup.
Id = HSLco33767
Insufficient amount of memory is allocated.
Resolution:
Enough memory is allocated.
Id = HSLco34046
Change device option is not working in host
restore mode.
Resolution:
Code is corrected.
Id = HSLco34166
OmniBack II SSEA integration option
"Keep Version available for Instant Restore" for
Continuous Access XP and Combined
(Continuous Access XP + Business Copy XP)
is not supported, but is selectable.
Resolution:
Option "Keep Version available for Instant Restore"
for other than Business Copy XP is grayed out.
Id = HSLco34174
The array that holds the objects of datalist is too
small.
Resolution:
The array is increased.
Id = HSLco34683
CDE text default color is white. OmniBack II has white
background so text is not readable.
Resolution:
Instead of button text we now use info text for tabs,
which is black.
Id = JAGad92807
This page is outdated. It must be labeled 'eCare
Support' and it must point to:
http://support.openview.hp.com/support.jsp?FromPROD
=ob_4_1
Resolution:
Label and links are fixed.
Id = NSMbb44613
At startup time all contexts/dlls are loaded.
On UX systems this needs ~2 seconds for each.
On top of that, ReadSubTree() is performed 3 times for
each context.
Resolution:
Usually administrator does not need all contexts from
the start. It is enough to first load database, monitor,
and backup. dlls for other contexts are only loaded when
the context is accessed during GUI session.
Id = HSLco34610
GUI does not check if instance is already configured.
Resolution:
GUI checks if instance is already configured.
Id = HSLco34641
"Restore to another instance" combo box for displaying
instances installed on SQL Server 2000 is missing.
Resolution:
"Restore to another instance" combo box is added.
Id = HSLco35458
MOM GUI is not aware of users and the result is "Not
Available" message in results area.
Resolution:
MOM GUI correctly displays users.
Part of SSPUX410_024.
Id = HSLco35714
If SAP host is selected in restore context, number of
objects is correct, but first object is displayed for
every object. Cause for the problem is definition of
variable mount.
Resolution:
Value of mount is not initialized but assigned.
Id = HSLco35716
Data protection value is improperly calculated.
Resolution:
Data protection calculation is improved.
Id = HSLco35943
OBII 4.x GUI reparsed RMAN script and incorrectly
recomposes it.
Resolution:
RMAN script parsing can be disabled by specifying the
following global variable:
NoGUIRMANScriptParsing=1
Part of SSPUX410_029.
PHSS_26342:
Id = HSLco31198
When restoring Oracle7 tablespace that is backed
up on one backup host to another target Oracle
client, the Restore Session Manager copies the rcs
file to the backup host instead of target host.
Resolution:
The rcs files are properly restored to the
target host.
Id = HSLco31665
Files which are grayed out in GUI are excluded with
option -exclude. Since the number of '-exclude' options
is limited, this can cause restore to fail.
Resolution:
Handling of excluded files is changed.
Id = HSLco31733
In next year the same date is not the same day in
week. Scheduled dates after one year are just copied,
so backups are scheduled on wrong days.
Resolution:
Days are correctly moved to next year.
Id = HSLco31949
Any attempt to establish connection to OmniBack II
A.04.00 Cell Manager from OmniBack II A.04.10 GUI,
when having no permissions to do so, results in
core dump of OmniBack II A.04.10 GUI.
Resolution:
Message "No permission" is displayed when one tries to
connect to a system where one does not have
sufficient permissions.
Part of SSPUX410_004.
Id = HSLco32409
GUI incorrectly determines which SQL objects has
already been added to SQL restore and which not.
Consequently GUI may display no objects at all,
though omnidb shows objects or the same object
several times.
Resolution:
GUI now correctly determines which SQL objects
have to be added to restore tree.
Id = JAGad95458
The Release Notes state that compression is not
supported for any of the database integrations.
Resolution:
The Compress option in GUI is disabled.
Id = HSLco32637
Printing is not possible due to missing windu xprinter
directory and *.drv files in OmniBack II installation.
Resolution:
Files are copied to the correct location.
Id = HSLco32864
GUI expects Windows Installation Server for Linux
client. However the right one is UNIX Installation
Server.
Resolution:
Checking is improved with new macro for GUI.
Id = HSLco32873
Selecting files for restore within interval that does
not include the full backup will trigger an error in
the list_full_rest_chain function.
Resolution:
The function marks an error and sends it to GUI, which
will show a message:
"You have chosen an interval which does not include
all the sessions needed to compose a full restore
chain. Please reconnect to the Cell Server".
Id = HSLco33095
When adding new device in GUI and device type is
changed to SCSI library in first step of wizard,
data format is not changed to interface type.
Resolution:
Window is invalidated and updated.
Id = HSLco33471
Split pre-exec and post-exec scripts working with the
EMC integration are disabled.
Resolution:
Split pre-exec and post-exec scripts working with the
EMC integration are enabled again.
Id = JAGae02797
OmniBack II uses '#' character for internal parsing.
Resolution:
Code is changed. New character <alt + 178> is used for
OmniBack II internal parsing.
Id = HSLco31357
In case that object has large number of messages,
GUI crashes during message check.
Resolution:
GUI is improved in order not to crash.
Id = HSLco31031
During client upgrade it is not possible to
automatically select all the hosts for the same
Installation Server.
Resolution:
GUI is improved.
Enhancement:
No
SR:
H555009286 H555008639 H555009111 H555008659 H555009202
H555009022 H555009033 H555009404 8606254802 H555009064
H555009570 H555009147 H555009228 H555008807 H555009339
H555008395 H555008764 H555008755 H555008476 H555008927
H555008657 H555008757 H555007993 8606280024 H555008849
H555008779 8606263614 8606245960 B555014660 8606271949
H555008700 H555006822 H555008803 H555007372 H555008624
H555008715 H555008752 H555008636 H555008664 H555008637
H555008754 H555007748 H555006839 H555008559 8606223711
H555007697 B555013242 H555008020 H555008004 H555008510
H555008511 H555008431 H555008049 H555007518 H555007752
H555007546 H555007519 H555007591 H555007485 H555006893
H555006875 H555007211 8606226389 H555006778 H555007125
H555007218 H555007048 H555006752 H555007472 8606233574
H555006942 H555007294 H555006818
Patch Files:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-1020/
A.04.10/packet.Z
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-11/A.04.10/
packet.Z
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/dec/alpha/osf1-4/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/gpl/i386/linux-60/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/ncr/i386/mp-ras/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sco/i386/sco_sv/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sco/i386/unixware/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sequent/i386/dynix/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sgi/mips/irix-62/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/siemens/r400/sinix/A.04.10/
packet.Z
/opt/omni/databases/vendor/cc/sun/sparc/solaris-26/A.04.10/
packet.Z
what(1) Output:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-1020/
A.04.10/packet.Z:
None
/opt/omni/databases/vendor/momgui/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,
v=HP:
/opt/omni/databases/vendor/cc/dec/alpha/osf1-4/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/gpl/i386/linux-60/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/ncr/i386/mp-ras/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sco/i386/sco_sv/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sco/i386/unixware/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sequent/i386/dynix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sgi/mips/irix-62/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/siemens/r400/sinix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/cc/sun/sparc/solaris-26/A.04.10/
packet.Z:
None
cksum(1) Output:
OMNIBACK-II.OMNI-HPUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,
v=HP:
3755546909 39363397 /opt/omni/databases/vendor/cc/hp/s800/
hp-ux-11/A.04.10/packet.Z
596358043 39335321 /opt/omni/databases/vendor/cc/hp/s800/
hp-ux-1020/A.04.10/packet.Z
3497793039 214245 /opt/omni/databases/vendor/momgui/hp/s800/
hp-ux-1020/A.04.10/packet.Z
3965677451 214427 /opt/omni/databases/vendor/momgui/hp/s800/
hp-ux-11/A.04.10/packet.Z
OMNIBACK-II.OMNI-OTHUX-P,fr=A.04.10,fa=HP-UX_B.11.00_32/64,
v=HP:
1816299085 6799195 /opt/omni/databases/vendor/cc/dec/alpha/
osf1-4/A.04.10/packet.Z
297119568 5433935 /opt/omni/databases/vendor/cc/gpl/i386/
linux-60/A.04.10/packet.Z
1247361839 6109916 /opt/omni/databases/vendor/cc/ibm/rs6000/
aix-42/A.04.10/packet.Z
2740347538 5979362 /opt/omni/databases/vendor/cc/ncr/i386/
mp-ras/A.04.10/packet.Z
3704196655 5861274 /opt/omni/databases/vendor/cc/sco/i386/
sco_sv/A.04.10/packet.Z
2183805223 5748319 /opt/omni/databases/vendor/cc/sco/i386/
unixware/A.04.10/packet.Z
998290913 5914807 /opt/omni/databases/vendor/cc/sequent/
i386/dynix/A.04.10/packet.Z
2951834334 7916215 /opt/omni/databases/vendor/cc/sgi/mips/
irix-62/A.04.10/packet.Z
2347356334 6698499 /opt/omni/databases/vendor/cc/siemens/
r400/sinix/A.04.10/packet.Z
2040670682 6083203 /opt/omni/databases/vendor/cc/sun/sparc/
solaris-26/A.04.10/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If any newer SSP for the Cell Console is installed
on your system, you must re-apply the SSP after
installing this Cell Console patch.
PHSS_28342:
Release Date: Available
Id = HSLco37193 SR:H555008807
PHSS_28342 is required for this defect fix.
PHSS_28344:
Release Date: Available
Id = HSLco37193 SR:H555008807
PHSS_28344 is required for this defect fix.
PHSS_27603:
Release date: Available
Id = HSLco37193 SR:H555008807
Id = HSLco39130 SR:H555009286
Id = JAGae12418 SR:8606245960
Id = HSLco32873 SR:H555007218
Id = HSLco33515 SR:H555007485
Id = HSLco37939 SR:H555008927
PHSS_27603 is required for these defect fixes.
OMNIBACK_00079:
Release Date: Available
Id = HSLco33238 SR:H555007372
OMNIBACK_00079 is required for this defect fix.
PHSS_27459:
Release Date: Available
Id = HSLco34581 SR:H555007993
Id = HSLco36526 SR:B555014660
PHSS_27459 is required for these defect fixes.
PHSS_28233:
Release Date: Available
Id = HSLco37193 SR:H555008807
Id = HSLco32873 SR:H555007218
Id = HSLco34641 SR:H555008020
Id = HSLco35716 SR:H555008511
Id = JAGad92807 SR:8606223711
Bad catalog access messages are displayed without
PHSS_28233.
Supersedes:
PHSS_27588 PHSS_26878 PHSS_26342
Equivalent Patches:
PHSS_28331:
s700: 10.20
s800: 10.20
Patch Package Size: 138420 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28332
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHSS_28332.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHSS_28332. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHSS_28332.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHSS_28332.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28332.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_28332:
NOTE!
This Patch has to be installed on the Installation
Server host.
The User Interface must be redistributed to the client
system(s) after the installation of the patch in order
to get the fixes into effect.
For distribution of the User Interface, refer to the
OmniBackII Installation guide.
Patch includes the following Site Specific Patches:
SSPUX410_004
SSPUX410_024
SSPUX410_029
SSPUX410_033
SSPUX410_034
SSPUX410_040
SSPUX410_053
-----End of Document ID: PHSS_28332------------------------------------------
Document ID: PHCO_28316
Date Loaded: 20030306
Title: s700_800 11.00 rc scripts patch
Patch Name: PHCO_28316
Patch Description: s700_800 11.00 rc scripts patch
Creation Date: 03/02/12
Post Date: 03/03/06
Hardware Platforms - OS Releases:
s700: 11.00
s800: 11.00
Products: N/A
Filesets:
OS-Core.UX-CORE,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHCO_28316
Symptoms:
PHCO_28316:
1. After the installation of the latest sh-posix
patch (PHCO_26789 or newer patch), rc scripts
on some systems show the following error message
during bootup:
"/sbin/rc[41]: 079: The specified number is not
valid for this command."
Defect Description:
PHCO_28316:
1. sh-posix now (PHCO_26789 or newer patch) adheres
to ISOC standards by recognizing the octal and
hexadecimal numbers (i.e., numbers starting with
0 should be recognized as octal and starting with
0x or 0X should be recognized as hexadecimal) in
arithmetic expressions involving let, $((..))
or ((..)).
This exposed a problem in rc.utils script containing
the following lines:
let ROWS="$rows"
let COLS="$cols"
where "rows" and "cols" contain 3 digit decimal values
of number of rows and columns of the HP terminal device.
If the $rows or $cols starts with a leading zero,
sh-posix(1) recognizes these numbers as octal numbers
instead of recognizing them as decimal numbers.
For example, if the value of "rows" is set to "079",
then sh-posix(1) will recognize the value of "rows"
as octal number while processing the let statement
"let ROWS="$rows"".Since "079" isn't a valid octal
number,the following error message is displayed during
bootup:
"/sbin/rc[41]: 079: The specified number is not
valid for this command."
Resolution:
The fix is to change the lines:
let ROWS="$rows"
let COLS="$cols"
to
let ROWS="${rows##*(0)}"
let COLS="${cols##*(0)}"
which removes the leading zeroes.
Enhancement:
No
SR:
8606249302
Patch Files:
OS-Core.UX-CORE,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP:
/sbin/rc.utils
what(1) Output:
OS-Core.UX-CORE,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP:
/sbin/rc.utils:
$Revision: 82.1.1.1 $
cksum(1) Output:
OS-Core.UX-CORE,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP:
1093630622 21781 /sbin/rc.utils
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes: None
Equivalent Patches: None
Patch Package Size: 40 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_28316
5. Run swinstall to install the patch:
swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHCO_28316.depot
By default swinstall will archive the original software in
/var/adm/sw/save/PHCO_28316. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:
-x patch_save_files=false
WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.
For future reference, the contents of the PHCO_28316.text file is
available in the product readme:
swlist -l product -a readme -d /tmp/PHCO_28316.depot
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_28316.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
Installation of this patch removes any
customization done by the user to "/sbin/rc.utils"
script. On such cases the user has to restore the
customization if required.
-----End of Document ID: PHCO_28316------------------------------------------
Document ID: PHSS_28705
Date Loaded: 20030305
Title: s700_800 11.X OV NNM6.2 Intermediate Patch, Feb 2003
Patch Name: PHSS_28705
Patch Description: s700_800 11.X OV NNM6.2 Intermediate Patch, Feb 2003
Creation Date: 03/02/27
Post Date: 03/03/05
Hardware Platforms - OS Releases:
s700: 11.00 11.11
s800: 11.00 11.11
Products:
OpenView Network Node Manager 6.2
Filesets:
OVNNMgr.OVMIB-CONTRIB,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVNNMgr.OVNNM-RUN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVNNMgr.OVNNMGR-JPN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVNNMgr.OVRPT-RUN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVNNMgr.OVWWW-JPN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVNNMgrMan.OVNNM-RUN-MAN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatform.OVEVENT-MIN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatform.OVMIN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatform.OVSNMP-MIN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatform.OVWIN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatform.OVWWW-EVNT,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatform.OVWWW-FW,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatform.OVWWW-SRV,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatformDevKit.OVWIN-PRG,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatformMan.OVEVENTMIN-MAN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatformMan.OVMIN-MAN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
OVPlatformMan.OVWIN-MAN,fr=B.06.20.00,fa=HP-UX_B.11.00_32/64,v=HP
Automatic Reboot?: No
Status: General Release
Critical: No
Category Tags:
defect_repair general_release
Path Name: /hp-ux_patches/s700_800/11.X/PHSS_28705
Symptoms:
PHSS_28705:
8606293110: "ScheduledMaintenance" circuit reports range
error in pmd.log file when input time period falls in the
last week of the year.
8606293261: When Internet Explorer with Microsoft JVM is
used, Network Presenter cannot establish a connection to
OVW running in Japanese environment on Solaris.
8606245261: It is possible to delete a map from the
command line when the map is open in a read-only OVW
session.
8606278162: Filter causes IPMap to use more than 90% CPU
when a small network is unmanaged.
8606265024: Node Submap and topology show inconsistent
status on some interface symbols. This happens when non-
IPMap symbols are placed in the Node Submap.
8606282939: Apache_1.3.0 shipped with NNM has problems
with certain web requests.
PHSS_28587:
8606284920: E-mails generated by reporting are not
received, if qmail is configured as the mail server.
PHSS_28565:
8606284812: On Remote Console, xnmevents takes a long time
to come up.
8606207670: On configuration updates, snmpCollect does not
reuse existing collections.
PHSS_28546:
8606289437: Unmanaging a network symbol inside a location
symbol causes any router connected to the network to be
unmanaged.
8606286694: Alarm Browser fails when an event containing
Shift-JIS byte code is selected. This occurs on Windows
under Japanese locale.
8606289384: Read Only map is not reflecting the same
layout as the Read-Write map.
8606288376: ovwdb core dumps due to internal buffer
overflow.
8606285768: ovw core dumps when exit button is clicked
more than once.
8606288696: Webappmon fails to handle more than 32KB of
data received from any application.
8606289286: On UNIX platforms, ovbackup.ovpl may fail.
8606287001: Network Presenter does not display error
message when ovw disconnects ungracefully.
8606284911: Cisco Gen report was showing only top 10 rows.
8606288055: xnmtrap locking issue when launched
simultaneously from Windows and HP-UX/Solaris consoles.
8606282709: The Web Alarm Browser does not show correct
status for certain Alarm Categories.
PHSS_28473:
8606228571: The migratable IP address reported by Sun
Clusters are not considered as migratable by NNM.
8606288064: netmon exits on receiving an invalid PDU.
PHSS_28400:
8606283616: The UNIX port 8880 is missing in ECS URL when
launched from a remote NT console.
8606288037: The ECS URL uses fixed UNIX Port number 8880.
8606280347: In Web Alarms Browser, Print on Server
option is not working on Solaris management station.
8606281958: In Web Alarms Browser, Show Node in Network
Presenter option is not giving expected results with
Internet Explorer using Sun Java plug-in.
8606277321: IPMap takes a long time to perform the
synchronization operation, in presence of a large number
of location symbols.
8606281716: IPMap consumes a high percentage of CPU, if
devices with large number of interfaces and present under
Location symbols are managed.
8606287613: IPMap loops during synchronization.
8606277559: ScheduledMaintenance circuit reports range
error for the input time period in pmd log file in the
last week of the month.
8606285281: ovtrapd cannot listen for SNMP Traps on a
specified interface, when there are more than one
configured LAN interfaces. It occupies the snmp-trap/UDP
port on all the interfaces.
8606277815: The Description section of the ovbackup.ovpl
manual page does not indicate that backup for $OV_WWW
directory is being done by this script.
8606281767: Netmon reports the status of admin-down
interfaces as critical and not disabled.
8606283445: nmdemandpoll fails to execute from OVW on
Windows.
8606284298: nmdemandpoll fails to execute from JOVW when
the management server is on Windows.
PHSS_28348:
8606285207: "Test SNMP" operation from xnmcollect GUI
fails when it is done on a node supporting large number of
interfaces.
PHSS_28258:
8606280632: A wrong trace message is displayed when the
API OVwDbUnsetFieldValues() is invoked.
8606278320: Windows Event Viewer fills up with
message "Unable to delete interface: network submap not
found."
8606239849: netmon manual page for the pickSnmpAddrPolls
option is not clear.
8606280620: Map filter gives wrong result when applied to
existing maps when the Internet Submap contains serial
networks that are unmanaged.
8606279382: Performance Reports configured with long
Collection Group Names are not generated.
8606279896: Hanging ovw session causes ovuispmd to block
infinitely. When ovuispmd blocks, it doesn't allow new ovw
session to register with it.
8606282042: ovw -pollXServer does not work as resource
option through OVw resource file.
8606276940: Date and time do not show up properly in
Xnmevents with Simplified Chinese locale.
8606276955: Date and time do not show up properly in the
pop-up window of Xnmevents with Simplified Chinese locale.
PHSS_28095:
8606259527: ovsessionmgr is using excessive number of
threads.
8606254134: The Japanese symbol labels in the Network
Presenter are garbled while using JPI 1.3.1_02 as the
default JRE for the supported browsers.
8606272882: The Network Presenter was not handling meta-
connection symbols on the root submap not having a label.
This caused it to hang at 40%.
8606281430: The environment variable, SHLIB_PATH, used by
the reporting script was incorrect.
8606277916: ovstart does not start httpd daemon after a
system reboot.
8606276415: Incorrect explanation for the xnmtopoconf '-
delete' option.
8606276337: The '-imp' option of xnmsnmpconf is clearing
the snmpnolookupconf cache.
8606213125: Incorrect behavior of the
filter 'isCollectionStationNode'.
8606276323: Trace option is not available in ovtrapd to
log the HEX and ASCII packet dump.
8606284782: ipmap leaks memory during synchronization.
PHSS_28092:
8606249457: netmon can loop when performing config check
on a node which has some interfaces configured with
ifAlias and interface IP address configuration
changes are detected by netmon. Further netmon has
useIfAlias set to true.
8606248180: When IP addresses are changed on devices,
netmon does not reflect the latest configuration even
after performing config check.
8606273023: ipmap does not delete some symbols and
connections correctly.
PHSS_28073:
8606249222: MIB file for OV Events is not available.
PHSS_27917:
8606270618: ovw manual page is not updated with the
information for the new command line option -pollXServer.
8606275431: ovuispmd exits on ovstatus while an
ovw -mapcount is active.
8606271492: For some of the events, the information
regarding their second varbind is not properly
documented in trapd.conf.
8606271049: Description for the event
OV_DataColl_Agent_Restart is not correct in trapd.conf.
8606266330: Netmon core dumps when started with -S and -R
options.
8606228341: Expression Guru of snmpCollect does not check
all the variables in an expression when calculating the
direct expression for a given category of indirect
expression.
8606249375: xnmevents displays traps whose BER encoding
does not fully conform to X.209 standard.
8606276676: netmon man page shows garbage character "10".
8606241507: Level 2 status is not displayed as
described in the netmon manual page.
8606274196: netmon dumps core in the routine
fixSegProlifForNet.
8606276402: Searching symbols using ovw menu item "Find ->
Object by Attribute" with Pattern Matching enabled
returns "No symbols representing objects found" if the
chosen attribute is not a name field. This problem is
observed only when ovwdb is started with the "-n" option.
8606270823: SMS integration problem with NNM6.2.
8606268260: Incorrect handling of timestamp.
8606272237: NNM report templates in the patch NNM_00852
and its equivalent patches, were not being generated when
copied to the OVreporter directories.
PHSS_27867:
ovw, xnmevents, xnmgraph do not display Asian characters
correctly.
PHSS_27836:
8606274432: mmonitor daemon of NNM Multicast was not
starting after applying the patch PSOV_03184 or its
equivalents.
8606276721: The NNM ECS engine exits abnormally when using
ECS circuits provided by LOGEC.
8606276687: xnmgraph fails to start if the filename option
of the -mibFile parameter is not specified.
PHSS_27747:
8606266737: 100% CPU utilization by pmd on WinNT.
8606266915: ovlauncher fails to display Chinese or Korean
characters in the launcher window.
8606264074: Double clicking an alarm in the Alarm Browser
does not display the correct submap if the source of the
alarm appears in more than one submap in the IP Map submap
hierarchy. This problem is seen after the source is moved to
a Location submap.
8606272817: Netmon exits on receipt of an invalid SNMP
response.
8606266361: ipmap puts out messages like "ipmap : Could not
delete interface, network submap not found"
8606267983: ovactiond crashes when an event is configured as
, Don't log or display, and its additional action has a
category as an argument.
8606254823: Display of the records in a generated report was
limited to the top ten rows.
8606261353: Cut and paste or drag and drop of a device from
the internet level submap into a location container causes
loss of connections inside the location container.
8606269552: snmp-commands cannot build the correct SNMP
packet when the length of the community name is greater than
127 bytes.
8606272791: ovtrapd manual page does not include the 64KB
trap enhancement.
8606264870: snmpCollect logs misleading error messages even
though the actual collection happens properly.
8606264777: In some cases, events do not match the source
defined in trapd.conf.
8606270467: Scripts integrating ovbackup.ovpl were failing
with error messages after installation of the patch
containing the new option '-t'.
8606270556: When NNM daemons are running in a different
locale other than C or Japanese, there is a possibility that
a directory with the current locale name is created under
$OV_WWW/htdocs. Under this circumstance the Release Notes
and Online manual menu item can fail.
8606271466: The menu item "Help->NNM->Patches and
updates" gives the incorrect information.
8606267361: xnmgraph exits, if the file provided as an
option to -mibFile contains more than 150 entries to
graph.
8606246340: netmon is unable to handle the filter name when
a complete path name is provided for the discovery filter
instead of just the filter name.
PHSS_27644:
Reports do not get generated, if double quotes exist in
ifAlias value, for interfaces.
PHSS_27641:
The map database may contain invalid symbols and submaps.
A symbol becomes invalid if its map object and
corresponding object in the object database are not
present. A submap becomes invalid if its parent map object
and the associated object in the object database do not
exist. Invalid symbols and submaps are not represented in
maps by ovw, but they lie unused in the map database.
PHSS_27639:
http server process cannot handle bad HTTP request types
correctly.
PHSS_27626:
1.nodeView.ovpl is not displaying the created graphics if
an interface label has the special and/or non-printable
characters that must be escaped in XML. These characters
include: & ' " < >. These special characters can come
from the interface alias, name or description.
2.On the content pane of 'View Scheduled Reports', there
is a table consisting of 'Report', 'Status',
and 'Schedule'. Contents of the table look good when the
window is opened. However, once the Reload,Stop or
Pause button is clicked, the contents of 'Schedule'
column('daily' or 'month-to-date') is garbled.
PHSS_27624:
A router is dragged and placed on a location symbol.
Selecting an event in xnmevents corresponding to the same
router leads to ovw core dump.
PHSS_27617:
Memory leak in xnmevents when it runs with filterByMap and
filterByMapManaged options.
PHSS_27615:
ovactiond man page not clear.
PHSS_27572:
Incorrect behaviour of xnmloadmib when MIBs were loaded
with the -trapType option , under the Japanese locale.
Defect Description:
PHSS_28705:
8606293110: The time period specified
in "ScheduledMaintenance" circuit was not being handled
correctly.
Resolution:
8606293110: "ScheduledMaintenance" circuit has been
modified to properly handle the range error.
8606293261: Microsoft JVM fails to handle EUCJIS encoding.
Resolution:
8606293261: Code has been implemented to handle EUCJIS
encoding.
8606245261: Map deletion by design was not meant to
restrain administrators from deleting maps that may be
open in read-only OVW sessions. This fact was not
mentioned in the OVW man page.
Resolution:
8606245261: The OVW man page is changed to apprise users
that maps opened in Read-Only OVW session are deleted when
ovw -deleteMap option is used.
8606278162: IPMap was applying filters for retrieving node
information from topology for nodes that were already
represented in the map.
Resolution:
8606278162: Code changes have been made to prevent the
application of filters while retrieving node information
from topology.
8606265024: IPMap was not correctly handling symbols added
to Node Submap by other OVW applications.
Resolution:
8606265024: IPMap has been modified to handle symbols
added by other OVW applications.
8606282939: Apache_1.3.0 shipped with NNM did not handle
some of the web requests properly.
Resolution:
8606282939: Apache-1.3.27 is now shipped with NNM to take
care of the above problems.
PHSS_28587:
8606284920: Reporting generated E-mail format did not
conform to the qmail format specifications.
Resolution:
8606284920: E-mail format specifications for qmail have
been incorporated in the generated message content.
PHSS_28565:
8606284812: A data buffer was not fully utilized. This
resulted in reading the same data.
8606207670: snmpCollect deleted all the existing
collections on receiving a configuration update.
Resolution:
8606284812: The data buffer is now being fully utilized.
8606207670: Configuration update algorithm is modified not
to delete the existing collections if their attributes are
not changed.
PHSS_28546:
8606289437: ovw incorrectly unmanages the router if the
network it connects to is unmanaged and the network is
contained inside a location symbol.
8606286694: Locale change is not taken care of in string
operations in Alarm Browser.
8606289384: If Auto Layout is disabled for all submaps of
a Read-Write map and the submaps are never visited, the
(x,y) coordinates of the symbols in these submaps will be
set to (0,0). This leads to a symbol stacking problem in
the read only copy when a layout by symbol coordinates is
attempted.
8606288376: An internal buffer overflow was resulting in a
corrupted pointer causing the core dump.
8606285768: ovw was dereferencing a NULL pointer.
8606288696: Webappmon uses a fixed 32KB buffer for
incoming data from any application.
8606289286: Without system utilities path in the PATH
environment variable, backup script fails.
8606287001: Network Presenter does not handle the case
when ovw disconnects ungracefully.
8606284911: The number of rows to display for CRGen report
was hardcoded to 10.
8606288055: The locking mechanisms used in UNIX and
Windows are not compatible with each other.
8606282709: Status update of Alarm Categories was not
handled properly on deletion of events from Web Alarm
Browser.
Resolution:
8606289437: ovw has been made aware of symbol and submap
hierarchy, so that it does not unmanage all child objects
as a result of unmanaging the parent object.
8606286694: Code has been changed to handle the locale
changes.
8606289384: If the submaps in the Read-Write map are never
visited, an Auto Layout is now performed on the Read Only
submaps, when they are opened.
8606288376: ovwdb has been modified to truncate the buffer
in line with the stated documentation.
8606285768: A null value check has been done for the
pointer that causes the core dump.
8606288696: Webappmon has been modified to allocate memory
for the data buffer dynamically when the data size exceeds
32KB.
8606289286: System utilities path has been included in the
PATH environment variable.
8606287001: Code has been added to display an error
message when any operation is performed in jovw after
disconnection with ovw.
8606284911: Code has been modified to pick up the value,
for the number of rows to be displayed, from the
global.conf file while configuring a report.
8606288055: A common locking mechanism is provided to
resolve the incompatibility.
8606282709: The code has been modified to appropriately
update status on Alarm Categories in the Web alarm browser.
PHSS_28473:
8606228571: NNM is not designed to handle Sun Clusters.
8606288064: netmon does not handle invalid PDUs.
Resolution:
8606228571: Changed NNM to understand the migratable IP
address reported by Sun Clusters. More details on the usage
can be found in the netmon.migratable man page.
8606288064: Changed netmon to handle the invalid PDU.
PHSS_28400:
8606283616: The port number for the management server was
not being appended to the URL.
8606288037: The UNIX port number was hard-coded as 8880
for UNIX management server.
8606280347: ovalarmsrv fails to handle the print request
from Web Alarms Browser.
8606281958: Network Presenter fails to recognize Internet
Explorer when Sun Java plug-in is installed.
8606277321: IPMap does not limit the scope of the
recursive procedure used to handle addition of devices
under Location symbols.
8606281716: IPMap does not limit the scope of the
recursive procedure used to handle the manage operation,
for devices with large number of interfaces and present
under Location symbols.
8606287613: IPMap performs the cleanup operation, during
synchronization, even for unused interfaces, causing it to
loop for devices having a large number of
unused/disconnected interfaces.
8606277559: The time period specified
in ScheduledMaintenance circuit was not being handled
correctly.
8606285281: ovtrapd is designed to listen for traps on the
snmp-trap/UDP port on all the configured LAN interfaces
for forwarding them to NNM Event Subsystem.
8606277815: Manual page was not updated after the defect
fix for SR 8606168719.
8606281767: Netmon does not update the status of the
interfaces as reported by SNMP during discovery. Hence,
for an admin-down interface that does not respond to ping,
Netmon sets the status as critical.
8606283445: OVW invokes xnmappmon when nmdemandpoll is
executed. xnmappmon is not handling white spaces in the
executable path correctly.
8606284298: JOVW invokes webappmon when nmdemandpoll is
executed. webappmon is not handling white spaces in the
executable path correctly.
Resolution:
8606283616: The port number used by the UNIX management
server is now retrieved and appended to the URL.
8606288037: The port number is now being read from
$OV_CONF/ovweb.conf file.
8606280347: ovalarmsrv has been modified to handle the
print request on Solaris.
8606281958: Code has been modified to recognize Internet
Explorer if Sun Java plug-in is installed.
8606277321: The scope of recursion has been limited in
IPMap.
8606281716: The scope of recursion has been limited in
IPMap.
8606287613: Now, IPMap performs the cleanup operation only
for interfaces that changed since the last time
synchronization was performed. Unused/disconnected
interfaces are ignored.
8606277559: ScheduledMaintenance circuit has been
modified to handle the range error.
8606285281: A command line option, -I, is added to ovtrapd
to occupy the snmp-trap/UDP port on only ONE interface,
which is used by OpenView NNM daemons. For more
information refer to the ovtrapd manual page. This
enhancement does not apply to the Windows version of NNM.
8606277815: Modified the ovbackup.ovpl manual page to
include the missing information.
8606281767: Netmon has been modified to update the status
of the interfaces as reported by SNMP during discovery.
8606283445: xnmappmon has been modified to handle the
white spaces in the specified path for nmdemandpoll.
8606284298: webappmon has been modified to handle the
white spaces in the specified path for nmdemandpoll.
PHSS_28348:
8606285207: The buffer sizes used were insufficient to
handle large number of Interfaces.
Resolution:
8606285207: The buffers are now dynamically allocated as
required.
PHSS_28258:
8606280632: Trace message in the API OVwDbUnsetFieldValues
() is incorrect.
8606278320: Event viewer error message does not provide
useful information and is very repetitive.
8606239849: The netmon manual page does not document
clearly the implications of the different values for the
pickSnmpAddrPolls option.
8606280620: IPMap re-collapses serial networks after
properly un-collapsing serial networks that are unmanaged.
8606279382: The contents of the "title" field in
snmp_trend_dataset table has a size of 40 characters.
The "title" field is updated with a compound string formed
from the MIB expression and Collection Group Name. During
the export of trend data, this compound string is
truncated if it is longer than 40 characters. As a result,
the SELECT query for the scheduled report returns no
records and so the report is not generated.
8606279896: ovuispmd does not allow new ovw connections if
one or more ovw sessions hang.
8606282042: -pollXServer command line option of ovw was
not available in the OVw resource file.
8606276940: Due to wrong font in resource file, date and
time do not come properly in xnmevents.
8606276955: Due to wrong font in resource file, date and
time do not come properly in the pop-up window of
Xnmevents.
Resolution:
8606280632: The trace message has been corrected to
display the right information.
8606278320: Useful information has been added and the
Event viewer message moved to trace, rather than log.
8606239849: netmon manual page has been modified to
reflect the right explanation.
8606280620: IPMap has been modified to handle the case for
unmanaged serial networks.
8606279382: The "NNM Analysis and Reporting" section
of "HP OpenView Web Online Help" has been updated with the
safe maximum length of Collection Group Names. This length
is fixed at 10 characters.
8606279896: ovuispmd has been changed not to block when
any ovw sessions hang.
8606282042: ovw has been modified to read pollXServer
option from the OVw resource file.
8606276940: Suitable font for Simplified Chinese locale
has been put in the resource file for Xnmevents.
8606276955: Suitable font for Simplified Chinese locale
has been put in the resource file for Xnmevents.
PHSS_28095:
8606259527: ovsessionmgr is not reusing the existing
Session-ID for multiple logins from a system with the same
user-id. This results in a new thread being created for
each such login.
Resolution:
8606259527: ovsessionmgr has been modified to reuse the
existing Session-ID if the session already exists for the
IP address and User-id pair. Otherwise a new session will
be created.
8606254134: Failure to convert Bytes to Unicode format.
Resolution:
8606254134: Code has been implemented to handle the
conversion.
8606272882: The Network Presenter is throwing a Null
Pointer Exception.
Resolution:
8606272882: Network Presenter was modified to handle the
meta-connection symbols existing on the root submap.
8606281430: The performance reports fail on the HPUX
platforms.
Resolution:
8606281430: The code has been modified to set the
SHLIB_PATH variable.
8606277916: On a system reboot, if the pid existing in the
apachectl pid file was in use, the startup script assumed
that the httpd process was running.
Resolution:
8606277916: The apachectl script has been modified to
start the httpd process via ovstart after a system reboot.
8606276415: xnmtopoconf '-delete' option was defined in-
correctly in the manual page.
Resolution:
8606276415: Updated the '-delete' option in the
xnmtopoconf manual page.
8606276337: Incorrect algorithm is used to open the SNMP
configuration database for the '-imp' option of
xnmsnmpconf.
Resolution:
8606276337: The algorithm for opening the SNMP
configuration database has been modified to ensure
snmpnolookupconf cache is not truncated for the option
'-imp' of xnmsnmpconf.
8606213125: Non-availability of the
field 'isCollectionStationNode' in the filter library.
Resolution:
8606213125: Code has been modified to update the library
with the field.
8606276323: Tracing option not available for ovtrapd.
Resolution:
8606276323: Tracing option has been added for ovtrapd to
log the HEX and ASCII packet dump in the
$OV_LOG/ovtrapd.log file. Refer the ovtrapd manual page
for further details.
8606284782: memory not released after allocation.
Resolution:
8606284782: ipmap was modified to release memory after
allocation/use.
PHSS_28092:
8606249457: netmon merged a node into itself when some
interface IP address configuration changes were detected
on interfaces with ifAlias.
Resolution:
8606249457: netmon was modified to handle changes to
interface IP address configurations on interfaces with or
without alias.
8606248180: netmon was not able to handle changes to IP
addresses. The changes to IP addresses would hence not be
reflected even after a config check.
Resolution:
8606248180: netmon was modified to handle changes to IP
addresses and reflect them in the database.
8606273023:ipmap does not remove gateway symbols and their
connections from the Network and Segment submaps, if the
interface connecting the gateway to the network is removed
(loses its IP address) or changed (gets a new IP address).
Resolution:
8606273023: ipmap was modified to perform the cleanup.
PHSS_28073:
8606249222: OV Events are the internal events for
communication between the OV NNM daemons. The definition
for these events coul