From: IT Resource Center (support_feedbackus-support2-mail.external.hp.com)
Date: Sun Mar 23 2003 - 23:41:00 CST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

                        HP Support Information Digests

===============================================================================
o IT Resource Center World Wide Web Service
   ---------------------------------------------------

   If you subscribed through the IT Resource Center and would
   like to be REMOVED from this mailing list, access the
   IT Resource Center on the World Wide Web at:

     http://support.itrc.hp.com/

   Login using your IT Resource Center User ID and Password.
   Then select Support Information Digests (located under
   Maintenance and Support). You may then unsubscribe from the
   appropriate digest.

   To download a patch referenced below, access the
   IT Resource Center on the World Wide Web at:

     http://support.itrc.hp.com/

   Login using your IT Resource Center User ID and Password.
   Then select Individual Patches (under Maintenance and Support)
   to access the patch. You may also download a patch via anonymous
   ftp(1) from ftp.itrc.hp.com.
===============================================================================


Digest Name: weekly HP-UX series 700 10.X patch digest
    Created: Sun Mar 23 6:05:46 EST 2003

Table of Contents:

Document ID Title
--------------- -----------
PHSS_28580 s700_800 10.X OV OB3.50 patch - ORACLE8 packet
PHSS_28582 s700_800 10.20 OV OB4.10 patch - ORACLE8 packet
PHSS_28333 s700_800 10.20 OV OB4.10 patch - MA packet
PHSS_28584 s700_800 10.20 OV OB4.10 patch - CORE packet

The documents are listed below.
-------------------------------------------------------------------------------


Document ID: PHSS_28580
Date Loaded: 20030321
      Title: s700_800 10.X OV OB3.50 patch - ORACLE8 packet

Patch Name: PHSS_28580

Patch Description: s700_800 10.X OV OB3.50 patch - ORACLE8 packet

Creation Date: 03/03/19

Post Date: 03/03/21

Hardware Platforms - OS Releases:
        s700: 10.00 10.01 10.10 10.20
        s800: 10.00 10.01 10.10 10.20

Products:
        OmniBackII A.03.50

Filesets:
        OMNIBACK-II.OMNI-OR8-P,A.03.50

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28580

Symptoms:
        PHSS_28580:
        Id = HSLco36925 SR: H555008734
            Split-mirror backup of Oracle 8 fails with:

               "Oracle8SmbBackup|5|: TARGET_DB_LOGIN: not found"

        Id = HSLco38032 SR: H555008977
            During Oracle Split Mirror Backup Data Protector
            displays error:

             "Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
              cannot create
              Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
              cannot open
              |Major| From: ob2rman.exe<hostname> "<barlist_name>"
               Time: mm/dd/yy hh:mm:ss
              The Production Database is not in automatic archival
              mode.
              Please set log_archive_start = true in your init.ora
              file".

        Id = HSLco38855 SR: H555009216
            Backup of Oracle8 database fails with:

              "RMAN-00558: error encountered while parsing input
               command."

        PHSS_26891:
        Id = HSLco33404 SR: H555007447
            ob2rman.exe script fails when executed on Solaris 8
            system.

        Id = JAGad70781 SR: 8606201607
            Recovery Catalog Database is not backed up in
            environments with different Oracle8 version in use.

        Id = JAGae06736 SR: 8606237698
            Backup of controlfilecopy fails when using
            split-mirror Oracle8 backup.

        PHSS_26217:
        Id = HSLco32267 SR: H555006995
            Script ob2rman.exe contains incorrect patch for
            HP-UX-like operating systems.

        Id = HSLco32861 SR: H555007210
            Recovery Manager abnormally ends due to objects
            missing from the database.

        PHSS_25000:
        Id = JAGad47613 SR: 8606178386
            Oracle 8i backup fails with:

              "ORA-03217: invalid option for alter of
               TEMPORARY TABLESPACE"

        Id = HSLco29318 SR: H555006325
            Linking procedure fails due to wrong checking.
            OmniBack II checks for Oracle 8.0.x as linked by
              "make -f ins_rdbms.mk ioracle"
            although Oracle 8.0.6 is linked by soft link.

        Id = HSLco28781 SR: H555006139
            When linking libobk.so with libob2oracle8_64bit.so,
            the OmniBack II is failing with:

              "ld: fatal: file
               $ORACLE_HOME/lib64/libobk.so
               wrong ELF class: ELFCLASS32"

        Id = HSLco30362 SR: H555006619
            Oracle SysAdmin password can be seen in a list of
            running processes during a backup of an Oracle database.

        PHSS_22438:
        Id = HSLco21865
            Certification of Oracle 8.1.6 on Sun Solaris 8
            32/64 bit.

        Id = HSLco22161
            Command "util_oracle8 -APP" returns nothing instead of
            list of Oracle 8 databases.

        Id = NSMbb37117
            util_oracle8.exe complains that Oracle is not linked
            with OmniBack II for backup.

        Id = NSMex03603
            Backup of Oracle 8 database fails with an error:

              "[Major]From BSM<hostname> "<ORA_SID_1>" Time:<time>
               [61:8000]Client named "<ORA_SID>" not configured in
               the barlist."

            where <ORA_SID_1> has an underscore in its name and
            <ORA_SID> is the same as a part of the name in front
            of underscore.

        Id = NSMex03723
            Split mirror backup of Oracle 8 fails with an error:

              "Can not mount database on Backup Host.".

        Id = NSMex03726
            Oracle 8i backup fails if more than 30 channels are
            allocated to be used for the backup.

        Id = NSMex03765
            Concurrent backup of two split mirror integrations does
            not work.

        Id = NSMex03972
            Oracle SysAdmin password can be seen in a list of
            running processes during a backup of an Oracle
            database.

        Id = JAGad42897
            OmniBack II reports successful backup although Oracle
            Recovery Manager core dumped.
              "[Major]From BSM<hostname> "<ORA_SID_1>" Time:<time>
               [61:8000]Client named "<ORA_SID>" not configured in
               the barlist."

            where <ORA_SID_1> has an underscore in its name and
            <ORA_SID> is the same as a part of the name in front
            of underscore.

Defect Description:
        PHSS_28580:
        Id = HSLco36925
            TARGET_DB_LOGIN variable is incorrectly set.

        Resolution:
            TARGET_DB_LOGIN variable is correctly set.

        Id = HSLco38032
            The /var/opt/omni/tmp/smb.(PID) file is not removed
            at the completion of the smb_common.sh script.
            When the PID is duplicated then the new
            /var/opt/omni/tmp/smb.(PID) file can not be created.

        Resolution:
            The /var/opt/omni/tmp/smb.(PID) file is removed
            at the completion of the smb_common.sh script.

            Part of SSPUX350_086.

        Id = HSLco38855
            Recovery Manager fails in cases when it receives input
            from barlists with very long lines.

        Resolution:
            Barlists are being sent to Recovery Manager as files and
            not as a single line.

        PHSS_26891:
        Id = HSLco33404
            ob2rman.exe script contains a grep command with "-x"
            option which does not exist on Solaris 8 systems.

        Resolution:
            Option "-x" is removed from the script.

        Id = JAGad70781
            OmniBack exports the path to export utility from the
            local system before backing up Recovery Catalog
            Database. If different version of Oracle8 is used on
            remote system, Recovery Catalog Database backup fails
            because of incorrect path to it is exported.

        Resolution:
            Environment variable ORA_EXP is introduced. Setting its
            value to path to export utility on the system in
            /etc/opt/omni/oracle8/${ORACLE_SID}/.profile file
            resolved described problem.

        Id = JAGae06736
            ob2rman.exe script incorrectly assumes that certain
            lines in Recovery Manager script are put in certain
            order. If this is not the case controlfilecopy backup
            fails.

        Resolution:
            ob2rman.exe script logic is adjusted.

        PHSS_26217:
        Id = HSLco32267
            Script ob2rman.exe contains "/etc/opt/omni" instead of
            "/usr/omni" paths for Solaris, AIX and Linux systems.

        Resolution:
            Script ob2rman.exe contains correct paths for different
            operating systems.

        Id = HSLco32861
            Recovery Manager abnormally ends on HP-UX systems
            after the installation of Oracle 8.1.7.2 patch and
            because of incorrect error handling on Solaris systems.

        Resolution:
            Error handling for Solaris systems is improved. To
            avoid Recovery Manager core dump on HP-UX systems,
            latest Oracle patches have to be applied as well.

            Part of SSPUX350_069.

        PHSS_25000:
        Id = JAGad47613
            OmniBack II integration did not skip locally managed
            tablespaces. This resulted in failure of Session
            Manager Backup in case the database contained this
            kind of tablespaces.

        Resolution:
            Code fixed to skip listing locally managed tablespaces.
            This kind of tablespaces will also be skipped when
            putting database in backup mode during Session Manager
            Backup.

        Id = HSLco29318
            When linking OmniBack II with Oracle 8.0.6, linking
            procedure fails.

        Resolution:
            In condition for making soft link, version 8.0.6 was
            added beside 8.1.x version of Oracle.

        Id = HSLco28781
            Linkig procedure fails because library is 32-bit only
            and the 64-bit library is missing in the PHSS_22438 /
            PHSS_22439.

        Resolution:
            64-bit libob2oracle8_64bit.so file for OmniBack II
            A.03.50 is added.

            Part of SSPUX350_045.

        Id = HSLco30362
            Database connection parameters are improperly sent.

        Resolution:
            Database connection parameters are sent in a secure
            manner.

            Part of SSPUX350_058.

        PHSS_22438:
        Id = HSLco21865
            Certification of Oracle 8.1.6 on Sun Solaris 8
            32/64 bit.

        Resolution:
            Oracle 8.1.6 can be used with OmniBack II A.03.50 on
            Sun Solaris 8 32/64 bit systems.
        Id = HSLco22161
            Location of oratab file varies on Unix-like platforms.

        Resolution:
            "util_oracle8 -APP" returns list of Oracle 8 databases
            on specified system.

        Id = NSMbb37117
            Library $ORACLE_HOME/lib/libobk.so is not properly
            linked.

        Resolution:
            Library $ORACLE_HOME/lib/libobk.so is properly linked.

        Id = NSMex03603
            OmniBack II Oracle 8 integration can not handle
            underscores in database names.

        Resolution:
            OmniBack II Oracle 8 integration backs up and restores
            databases with underscores in its names.

        Id = NSMex03723
            If Oracle 8 is configured using Oracle native tools
            (for example, dbassist), user gets an error message:

              "Not able to use log_archive_dest_1 and
               log_archive_dest in Oracle configuration file."

            because log_archive_dest_1 can not be overridden. This
            causes split mirror backup to fail with:

              "Can not mount database on Backup Host".

        Resolution:
            Configuration script for OmniBack II Oracle 8
            integration is modified to be able to set
            log_archive_dest properly.

        Id = NSMex03726
            Parameters used in Oracle 8i backup inside the "rman"
            statement are sent through sed as a single line. Since
            sed has a limitation (2kB per line), backup fails.

        Resolution:
            Parameters for a backup are sent in a file.

            Part of SSPUX350_009.

        Id = NSMex03765
            Shell scripts executed for concurrent sessions use same
            temporary files which causes concurrent split mirror
            backups to fail.

        Resolution:
            All the temporary used files have "_${OB2BARLIST}"
            appended to its names.

            Part of SSPUX350_012.

        Id = NSMex03972
            Database connection parameters are improperly sent.

        Resolution:
            Database connection parameters are sent in a secure
            manner.

            Part of SSPUX350_025.

        Id = JAGad42897
            OmniBack II does not check Oracle Recovery Manager's
            exit code.

        Resolution:
            OmniBack II checks exit code from Oracle Recovery
            Manager.

            Part of SSPUX350_019.

SR:
        H555009216 B554000856 H555008734 H555008977 8606201607
        H555007447 8606237698 H555007210 H555006995 H555006139
        H555006619 H555005612 8606178386 H555005442 H555006325
        B554000853 H555004430 H555004155 B554000895 H555003435
        8606173640 B555007579 H555003488 B554000734

Patch Files:
        /opt/omni/databases/vendor/oracle8/gpl/i386/linux/A.03.50/
                packet.Z
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-1020/
                A.03.50/packet.Z
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-11/A.03.50/
                packet.Z
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-42/
                A.03.50/packet.Z
        /opt/omni/databases/vendor/oracle8/sun/sparc/solaris-26/
                A.03.50/packet.Z

what(1) Output:
        /opt/omni/databases/vendor/oracle8/gpl/i386/linux/A.03.50/
                packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-1020/
                A.03.50/packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-11/A.03.50/
                packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-42/
                A.03.50/packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/sun/sparc/solaris-26/
                A.03.50/packet.Z:
                None

cksum(1) Output:
        875295657 341337 /opt/omni/databases/vendor/oracle8/gpl/
                i386/linux/A.03.50/packet.Z
        799866666 2016799 /opt/omni/databases/vendor/oracle8/hp/
                s800/hp-ux-1020/A.03.50/packet.Z
        3830693439 2004525 /opt/omni/databases/vendor/oracle8/hp/
                s800/hp-ux-11/A.03.50/packet.Z
        800747744 521349 /opt/omni/databases/vendor/oracle8/ibm/
                rs6000/aix-42/A.03.50/packet.Z
        3774675108 1073075 /opt/omni/databases/vendor/oracle8/sun/
                sparc/solaris-26/A.03.50/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes:
        PHSS_22438 PHSS_25000 PHSS_26217 PHSS_26891

Equivalent Patches:
        PHSS_28581:
        s700: 11.00 11.11 11.20
        s800: 11.00 11.11 11.20

Patch Package Size: 5880 KBytes

Installation Instructions:
        Please review all instructions and the Hewlett-Packard
        SupportLine User Guide or your Hewlett-Packard support terms
        and conditions for precautions, scope of license,
        restrictions, and, limitation of liability and warranties,
        before installing this patch.
        ------------------------------------------------------------
        1. Back up your system before installing a patch.

        2. Login as root.

        3. Copy the patch to the /tmp directory.

        4. Move to the /tmp directory and unshar the patch:

                cd /tmp
                sh PHSS_28580

        5a. For a standalone system, run swinstall to install the
            patch:

                swinstall -x autoreboot=true -x match_target=true \
                        -s /tmp/PHSS_28580.depot

        By default swinstall will archive the original software in
        /var/adm/sw/patch/PHSS_28580. If you do not wish to retain a
        copy of the original software, you can create an empty file
        named /var/adm/sw/patch/PATCH_NOSAVE.

        WARNING: If this file exists when a patch is installed, the
                 patch cannot be deinstalled. Please be careful
                 when using this feature.

        It is recommended that you move the PHSS_28580.text file to
        /var/adm/sw/patch for future reference.

        To put this patch on a magnetic tape and install from the
        tape drive, use the command:

                dd if=/tmp/PHSS_28580.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
        PHSS_28580:
        NOTE!
        Patch has to be installed on the Installation Server host.

        The Oracle 8 packets must be redistributed to the Oracle 8
        client system(s) afterwards to get the fixes into effect.

        It is strongly recommended to stop all Oracle services
        running on clients using OmniBack II Oracle8 integration
        before applying the fixes from this patch.

        Patch includes the following Site Specific Patches:
           SSPUX350_009
           SSPUX350_012
           SSPUX350_019
           SSPUX350_025
           SSPUX350_045
           SSPUX350_058
           SSPUX350_069
           SSPUX350_086
-----End of Document ID: PHSS_28580------------------------------------------


Document ID: PHSS_28582
Date Loaded: 20030320
      Title: s700_800 10.20 OV OB4.10 patch - ORACLE8 packet

Patch Name: PHSS_28582

Patch Description: s700_800 10.20 OV OB4.10 patch - ORACLE8 packet

Creation Date: 03/03/19

Post Date: 03/03/20

Hardware Platforms - OS Releases:
        s700: 10.20
        s800: 10.20

Products:
        OmniBackII A.04.10

Filesets:
        OMNIBACK-II.OMNI-OR8-P,A.04.10

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28582

Symptoms:
        PHSS_28582:
        Id = HSLco36196 SR: H555008622
            OmniBack II Oracle8 integration is not supported on
            IBM AIX 5L operating system.

        Id = HSLco36623 SR: H555008671
            ob2rman.exe fails to export environment variables on
            Linux systems.

        Id = HSLco38855 SR: H555009216
            Backup of Oracle8 database fails with:

              "RMAN-00558: error encountered while parsing input
               command."

        Id = HSLco39136 SR: H555009291
            Backup of Oracle8 database fails on Sun Solaris
            system if OMNI_HOSTS variable is set.

        PHSS_26221:
        Id = HSLco30536 SR: H555006648
            OmniBack II Oracle8 integration is not supported on
            64-bit versions of AIX operating system.

        Id = HSLco30537 SR: H555006649
            OmniBack II Oracle8 integration is not supported on
            Compaq Tru64 operating system.

        Id = HSLco31519 SR: H555006850
            Debug files for Oracle8 sessions are always put
            in /tmp/directory.

        Id = HSLco33404 SR: H555007447
            ob2rman.exe script fails when executed on Solaris 8
            system.

        Id = JAGad70781 SR: 8606201607
            Recovery Catalog Database is not backed up in
            environments with different Oracle8 version in use.

        Id = JAGae06736 SR: 8606237698
            Backup of controlfilecopy fails when using
            split-mirror Oracle8 backup.

Defect Description:
        PHSS_28582:
        Id = HSLco36196
            OmniBack II Oracle8 integration is not supported on
            IBM AIX 5L operating system.

        Resolution:
            OmniBack II Oracle8 integration is supported on
            IBM AIX 5L operating system.

            Part of SSPUX410_060.

        Id = HSLco36623
            Redirected "while" command executes in subshell on Linux
            systems causing environment variables not to be properly
            exported.

        Resolution:
            Environment variables are properly exported on Linux
            systems.

        Id = HSLco38855
            Recovery Manager fails in cases when it receives input
            from barlists with very long lines.

        Resolution:
            Barlists are being sent to Recovery Manager as files and
            not as a single line.

        Id = HSLco39136
            IP address in not properly converted on 64-bit Sun
            Solaris system where OMNI_HOSTS variable is set.

        Resolution:
            IP addresses are properly resolved regardless of
            OMNI_HOSTS variable settings.

        PHSS_26221:
        Id = HSLco30536
            OmniBack II Oracle8 integration is not supported on
            64-bit versions of AIX operating system.

        Resolution:
            OmniBack II Oracle8 integration is supported on
            64-bit versions of AIX operating system.

            Part of SSPUX410_018.

        Id = HSLco30537
            OmniBack II Oracle8 integration is not supported on
            Compaq Tru64 operating system.

        Resolution:
            OmniBack II Oracle8 integration is supported on
            Compaq Tru64 operating system.

        Id = HSLco31519
            OmniBack ignores OB2OPTS variable and puts debug files
            to default location.

        Resolution:
            Debug files for Oracle8 sessions are put to location
            specified in OB2OPTS variable.

        Id = HSLco33404
            ob2rman.exe script contains a grep command with "-x"
            option which does not exist on Solaris 8 systems.

        Resolution:
            Option "-x" is removed from the script.

        Id = JAGad70781
            OmniBack exports the path to export utility from the
            local system before backing up Recovery Catalog
            Database. If different version of Oracle8 is used on
            remote system, Recovery Catalog Database backup fails
            because of incorrect path to it is exported.

        Resolution:
            Environment variable ORA_EXP is introduced. Setting its
            value to path to export utility on the system in
            /etc/opt/omni/oracle8/${ORACLE_SID}/.profile file
            resolved described problem.

        Id = JAGae06736
            ob2rman.exe script incorrectly assumes that certain
            lines in Recovery Manager script are put in certain
            order. If this is not the case controlfilecopy backup
            fails.

        Resolution:
            ob2rman.exe script logic is adjusted.

SR:
        H555009035 H555009216 H555008622 H555009291 H555008671
        H555009059 H555006649 H555006850 8606201607 H555007447
        8606237698 H555006648

Patch Files:
        /opt/omni/databases/vendor/oracle8/gpl/i386/linux-60/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-1020/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-42/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-51/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-51/
                A.04.10/require.dat
        /opt/omni/databases/vendor/oracle8/sun/sparc/solaris-26/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/oracle8/dec/alpha/osf1-4/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/oracle8/dec/alpha/osf1-4/A.04.10/
                require.dat

what(1) Output:
        /opt/omni/databases/vendor/oracle8/gpl/i386/linux-60/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-1020/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-42/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-51/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/ibm/rs6000/aix-51/
                A.04.10/require.dat:
                None
        /opt/omni/databases/vendor/oracle8/sun/sparc/solaris-26/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/dec/alpha/osf1-4/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/oracle8/dec/alpha/osf1-4/A.04.10/
                require.dat:
                None

cksum(1) Output:
        3004174531 378551 /opt/omni/databases/vendor/oracle8/gpl/
                i386/linux-60/A.04.10/packet.Z
        2470002943 1264419 /opt/omni/databases/vendor/oracle8/hp/
                s800/hp-ux-1020/A.04.10/packet.Z
        977252934 1264041 /opt/omni/databases/vendor/oracle8/hp/
                s800/hp-ux-11/A.04.10/packet.Z
        2137086808 867829 /opt/omni/databases/vendor/oracle8/ibm/
                rs6000/aix-42/A.04.10/packet.Z
        1438687582 874805 /opt/omni/databases/vendor/oracle8/ibm/
                rs6000/aix-51/A.04.10/packet.Z
        184065075 19 /opt/omni/databases/vendor/oracle8/ibm/rs6000/
                aix-51/A.04.10/require.dat
        1195526059 1079987 /opt/omni/databases/vendor/oracle8/sun/
                sparc/solaris-26/A.04.10/packet.Z
        3483439680 516125 /opt/omni/databases/vendor/oracle8/dec/
                alpha/osf1-4/A.04.10/packet.Z
        3512108347 17 /opt/omni/databases/vendor/oracle8/dec/alpha/
                osf1-4/A.04.10/require.dat

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
        If any newer SSP for the Oracle8 is installed
        on your system, you must re-apply the SSP after
        installing this Oracle8 patch.
        PHSS_28584:
        Release Date: Late March
        Id = HSLco36196 SR: H555008622
        PHSS_28584 (or later) is required for this enhancement.

Supersedes:
        PHSS_26221

Equivalent Patches:
        PHSS_28583:
        s700: 11.00 11.11 11.20
        s800: 11.00 11.11 11.20

Patch Package Size: 6170 KBytes

Installation Instructions:
        Please review all instructions and the Hewlett-Packard
        SupportLine User Guide or your Hewlett-Packard support terms
        and conditions for precautions, scope of license,
        restrictions, and, limitation of liability and warranties,
        before installing this patch.
        ------------------------------------------------------------
        1. Back up your system before installing a patch.

        2. Login as root.

        3. Copy the patch to the /tmp directory.

        4. Move to the /tmp directory and unshar the patch:

                cd /tmp
                sh PHSS_28582

        5a. For a standalone system, run swinstall to install the
            patch:

                swinstall -x autoreboot=true -x match_target=true \
                        -s /tmp/PHSS_28582.depot

        By default swinstall will archive the original software in
        /var/adm/sw/patch/PHSS_28582. If you do not wish to retain a
        copy of the original software, you can create an empty file
        named /var/adm/sw/patch/PATCH_NOSAVE.

        WARNING: If this file exists when a patch is installed, the
                 patch cannot be deinstalled. Please be careful
                 when using this feature.

        It is recommended that you move the PHSS_28582.text file to
        /var/adm/sw/patch for future reference.

        To put this patch on a magnetic tape and install from the
        tape drive, use the command:

                dd if=/tmp/PHSS_28582.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
        PHSS_28582:
        NOTE!
        Patch has to be installed on the Installation Server host.

        The Oracle 8 packets must be redistributed to the Oracle 8
        client system(s) afterwards to get the fixes into effect.

        Patch includes the following Site Specific Patches:
           SSPUX410_018
           SSPUX410_060
-----End of Document ID: PHSS_28582------------------------------------------


Document ID: PHSS_28333
Date Loaded: 20030319
      Title: s700_800 10.20 OV OB4.10 patch - MA packet

Patch Name: PHSS_28333

Patch Description: s700_800 10.20 OV OB4.10 patch - MA packet

Creation Date: 03/03/18

Post Date: 03/03/19

Hardware Platforms - OS Releases:
        s700: 10.20
        s800: 10.20

Products:
        OmniBackII A.04.10

Filesets:
        OMNIBACK-II.OMNI-ACS-P,A.04.10
        OMNIBACK-II.OMNI-DAS-P,A.04.10
        OMNIBACK-II.OMNI-HPUX-P,A.04.10
        OMNIBACK-II.OMNI-OTHUX-P,A.04.10
        OMNIBACK-II.OMNI-FXMA-P,A.04.10
        OMNIBACK-II.OMNI-NDMP-P,A.04.10

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28333

Symptoms:
        PHSS_28333:
        Id = HSLco31403 SR: H555006826
            Tape is not marked poor after append fails.

        Id = HSLco37256 SR: H555008826
            Restore of incrementally backed up objects fails.

        Id = HSLco37582 SR: H555008870
            "ssi.sh" script fails with error:

              "/opt/omni/acs/ssi.sh|17|: grep: not found.

               Starting ACS daemons...
               /opt/omni/acs/ssi.sh|4|: ps: not found.
               /opt/omni/acs/ssi.sh|4|: grep: not found.
               Problems starting ACS Event Logger
               Unsuccessful in starting ACS daemons".

        Id = HSLco38124 SR: H555009018
            OmniBack II is not gathering tape I/O operation
            statistics.

        Id = HSLco38160 SR: H555009027
            OmniBack II does not show the copy progress of tapes
            in the GUI/CLI session report.

        Id = HSLco38372 SR: H555009078
            Autoconfiguration of Mammoth2 device fails.

        Id = HSLco38412 SR: H555009095
            When running backup and "omnimm -silo_query" command
            at the same time, status of tapes that are used for
            backup is set to "non resident".

        Id = HSLco38420 SR: H555009101
            Initialization of Magneto Optical (MO) medium fails
            with error:

            "|Major| From: MMA<host> "device" Time: <time>
             |90:129| Medium has no capacity."

        Id = HSLco38492 SR: H555009139
            Media Agent reports errors:

            "|Minor| From: BMA<host> "<device>" Time: <time>
             |90:197| Could not read data (attribute
             ID=AUX_OMNIBACK_MEDIA_HEADER) from cartridge memory ().

             |Minor| From: BMA<host> "<device>" Time:<time>
             |90:198| Could not write data (attribute
             ID=<Host attributes>) from cartridge memory ()."

        Id = HSLco39232 SR: H555009315
            Backup fails with error:

            "|Major| From: BMA<host> "<device>" Time: <time>
             |90:51| |16| Device busy
                Cannot write to device ((NULL))"

        Id = HSLco39489 SR: H555009407
            OmniBack II is performing unnecessary cleanings on
            DLT drives.

        Id = HSLco40523 SR: H555009859
            Even if "OB2ACS_VOLUMEDRIVE_POOR=1" option is enabled
            in ".omnirc" file, OmniBack II does not mark tape as
            "Poor" in case tape mount operation fails with
            ACS error: "STATUS_VOLUME_IN_DRIVE".

        PHSS_27458:
        Id = HSLco30962, HSLco35407 SR: H555006734, H555008421
            When testing the drive cleaning configuration
            using OmniBack II dirty drive simulation method
            on DDS4 autoloader DAT40x6i/e the tape
            unload fails with the following error message:

              "[12:5] Internal error in
               ("/src/ma/pol/polmax.c /main/r31_split/3":565)
                => process aborted
                This is an unexpected condition and is likely
                due to a combination of circumstances involving
                both this product and the operating system.
                Report this error to your post-sales OmniBack II
                Support Representative."

        Id = HSLco34581 SR: H555007993
            devbra is not working properly with devices in
            environments where "st_san_safe" kernel parameter
            is enabled.

        Id = HSLco34684 SR: H555008050
            Backup on LTO device on AIX platform fails with error:

              "Cannot close after write problem. ([5] There is an
               input or output error.)"

        Id = HSLco34910 SR: H555008179
            New inquiry strings are needed for Compaq devices.

        Id = HSLco35035 SR: H555008242
            During backup of NDMP integration Backup Media Agent
            session completes with failures.

        Id = HSLco35178 SR: H555008328
            Backup fails with error:

              "[90:135] Can not eject medium. ([5] I/O error)"

        Id = HSLco35450 SR: H555008428
            Auto configuration of Overland Data Neo Series
            LXN2000 and Neo Series LXN4000 with Quantum
            SDLT220 tape drives does not work.

        Id = HSLco35670 SR: H555008496
            OmniBack II displays incorrect message in Graphical
            User Interface (GUI) when Medium header check
            verification is performed:

               "Medium verification completed, 0 errors found"

        Id = HSLco35704 SR: H555008504
            Bulk eject functionality does not work after
            installing patch PHSS_26357/PHSS_26358.

        Id = HSLco36329 SR: H555008634
            OmniBack II does not unload tape at the end of the
            backup.

        Id = HSLco36526 SR: B555014660
            Sanconf does not distinguish between tape devices
            having serial numbers longer than 10 digits.

        Id = HSLco36656 SR: H555008680
            Cell Manager list and reformat does not work on
            UNIX platforms.

        Id = HSLco35925 SR: H555008555
            Backup to multihost device fails in case that
            reconnect option is used.

        Id = HSLco36147 SR: H555008610
            When during the backup end of tape is reached BMA
            ends abnormally.

        Id = HSLco36472 SR: H555008655
            Backup to file device fails with error:

            "[Major] From: BMA<host_name> "<device_name>"
             Time: <dd.mm.yy hh:mm:ss>
             [90:51] /FileDevice
                Cannot write to device ([27] File too large)"

        Id = HSLco37281 SR: H555008834
            Backup to tape device on AIX platform fails with error:

             "[Major] From: MMA<host_name> "<device_name>"
              Time: <dd.mm.yy hh:mm:ss>
              [90:173] REQUEST SENSE call failed.
              Possible cleanme signal detection failure.
                ([14] Bad address)"

             "[Critical] From: MMA<host_name> "device_name"
              Time: <dd.mm.yy hh:mm:ss>
              [90:43] /dev/rmt0.1
                 Invalid physical device type => aborting"

        Id = HSLco36985, HSLco36532 SR: H555008753, H555008662
            Incremental backup of big Net App filer volumes fails
            if there are a lot of exclude parameters specified.

        Id = HSLco36901 SR: H555008728
            Backup to direct access media fails with error:

            "Cannot write to device
             ([6] No such device or address)"

        Id = HSLco36135 SR: H555008608
            ACS Media Agent does not retry on errors.

        Id = HSLco36960 SR: H555008747
            Backup to 9840 device fails with error:

            "Invalid physical device type => aborting."

        Id = JAGae28035 SR: 8606263710
            Backup to tape drive fails if cleaning tape is loaded.

        PHSS_26357:
        Id = HSLco33017 SR:H555007269
            Library robotic mechanism is not released after tape
            eject.

        Id = HSLco33264 SR:H555007381
            After failed backup session due to an I/O drive status
            error, important information about the error in
            debug.log file is missing.

        Id = HSLco33563 SR:H555007513
            Medium verification error is reported after
            successfully completed backup:

              "Medium verification completed, 1 errors found".

        Id = HSLco33982 SR:H555007663
            ACSLS query fails for STK 9940 media.

        Id = HSLco34050 SR:H555007700
            Backup fails with an error:

            "[Critical] From: BMA<HOST> "<DEVICE>" Time:<TIME>
             [90:30] SM/MA protocol error => aborting"

        Id = HSLco34139 SR:H555007739
            After OmniBack II detects dirty drive and loads a
            cleaning tape, option for medium header check aborts
            the backup session.

        Id = HSLco34266 SR:H555007798
            If 'InitOnLoosePolicy' is set to 0 and foreign tape
            is loaded OmniBack II aborts backup session instead
            of issuing a mount request.

        Id = NSMbb44407 SR:B555013119
            Sony DTF device does not work correctly.

        PHSS_26219:
        Id = HSLco30584 SR: H555006666
            Omniback does not check if the medium is corrupted
            at the end of the backup.

        Id = HSLco31274 SR: H555006790
            DAS Media Agent cannot handle more than 15 drives.

        Id = HSLco31293 SR: H555006798
            Querying GRAU libraries hangs.

        Id = HSLco31696 SR: H555006885
            ACS Media Agent does not recognize LTO drives.

        Id = NSMbb44086 SR: B555012905
            NDMP Media Agent packages do not contain devbra.

        Id = HSLco30326 SR: H555006608
            OmniBackII A.04.10 does not support HP VS80 and
            Benchmark VS640 libraries.

        Id = HSLco32416 SR: H555007051
            During backup following messages are reported:

            [Normal] From: BSMHostName "Datalist" Time: <time>
            [61:1011] Received reconnect request from BMAHostName
            "Device".

            [Normal] From: BSMHostName "Datalist" Time: <time>
            BMAHostName "Device" reconnected successfully.

Defect Description:
        PHSS_28333:
        Id = HSLco31403
            If append fails during positioning, the tape is not
            marked poor.

        Resolution:
            Error handling is improved.

        Id = HSLco37256
            Because of drive problems, Media Agent does not
            position the tape to the right location.

        Resolution:
            The way Restore Media Agent finds the right position
            on the tape has been changed. If you receive error
            message:

              "|Major|From RMA<host> "<device>" time:<time>
               |90:184| Cannot forward block. |Details unknown.|"

            then set new environment variable OB2NOBLOCKSEEK in
            .omnirc file to 1 .

        Id = HSLco37582
            When started during the system startup, "ssi.sh"
            script fails because environment variable PATH is
            not set.

        Resolution:
            PATH is set in the "ssi.sh" script and works
            correctly during the system startup.

            Part of SSPUX410_045.

        Id = HSLco38124
            Tape I/O operation statistics functionality is not
            implemented in OmniBack II.

        Resolution:
            Tape I/O operation statistics functionality was added.
            To enable it, add the new environment variable
            "OB2TAPESTATISTICS" to the ".omnirc" file and switch
            it on (OB2TAPESTATISTICS=1).
            Tape I/O operation statistics is then logged in
            "/var/opt/omni/log/tapestatistics.log" file.
            The statistics consist of:
             1. Errors corrected without substantial delay
             2. Errors corrected with possible delays
             3. Total rewrites or rereads
             4. Total errors corrected
             5. Total times correction algorithm processed
             6. Total bytes processed
             7. Total uncorrected errors

            Part of SSPUX410_049.

        Id = HSLco38160
            OmniBack II does not include 'show tape copy progress'
            functionality.

        Resolution:
            This functionality is added. To enable it, add the
            new environment variable "OB2COPYTAPEMSG=k"
            in ".omnirc" file. OmniBack II then for every k-th
            segment shows a message:

            "|Normal| From: CMA-ACS<hostname> "<device>"
             Time: <time>
                 Copying segment k"

        Id = HSLco38372
            The device autoconfiguration fails, because the drive
            is not recognized.

        Resolution:
            Autoconfiguration "Product ID" string in scsitab file
            is changed from "Mammoth2" to "MAMMOTH2".

        Id = HSLco38412
            OmniBack II does not properly handle mounted tapes.

        Resolution:
            Tapes in home position and mounted tapes are handled
            the same way. They are both considered 'resident'.

        Id = HSLco38420
            In case that Media Agent host uses the old NIO SCSI
            bus, OmniBack II is not able to get the capacity of
            a mounted Magneto Optical (MO) medium.

        Resolution:
            Media Agent is improved to correctly get the
            capacity of the MO medium.

        Id = HSLco38492
            Read/write of Cartridge Memory on LTO devices does not
            work properly.

        Resolution:
            Media Agent is improved to work correctly with
            Cartridge Memory on LTO devices.

        Id = HSLco39232
            In AIX SAN environment it is possible that a device
            is not available for a couple of seconds due to other
            activities in SAN environment. In such cases the
            "write()" command fails with EBUSY error.

        Resolution:
            Retry is added in case of EBUSY error. Retry can be
            configured with environment variables
            OB2SPTRETRY (default 10 retries) and
            OB2SPTSLEEP (default 10 seconds) in ".omnirc" file.

            Part of SSPUX410_057.

        Id = HSLco39489
            OmniBack II is performing cleaning of DLT drives in
            case that cleaning light is on. But in some cases
            this light is still on even after drive is cleaned
            and OmniBack II repeats cleaning cycle.

        Resolution:
            New environment variable, "OB2DLTCLEANINGLIGHTCHECK"
            is added in ".omnirc" file. By default it is set to
            "0" and cleaning is not performed when cleaning light
            is on. If variable is set to "1", cleaning is performed.

        Id = HSLco40523
            OmniBack II is not designed to mark tape as occupied
            when tape mounting fails with "STATUS_VOLUME_IN_DRIVE".

        Resolution:
            OmniBack II properly marks tape as "Poor" in case
            when mount operation fails with ACS error:
            "STATUS_VOLUME_IN_DRIVE".

            Part of SSPUX410_058.

        PHSS_27458:
        Id = HSLco30962, HSLco35407
            When the devices automatically unloads, OmniBack II
            tries to unload but fails since the device already
            unloaded tape.

        Resolution:
            New environment variable OB2NOEJECTCLEANINGTAPE which
            has to be set to 1 in omnirc file, was implemented in
            order to prevent OmniBack II to unload the cleaning
            tape.

        Id = HSLco34581
            Enabled "st_san_safe" parameter causes incorrect
            system handling for the devices with "rewind on close"
            implemented. This causes devbra to return unusable
            devices.

        Resolution:
            devbra is adapted in order to work properly when
            "st_san_safe" kernel parameter is enabled.

        Id = HSLco34684
            Media Agent on AIX platform does not handle End
            of Medium correctly for LTO devices.

        Resolution:
            End of Medium handling is improved for LTO devices
            on AIX platform.

        Id = HSLco34910
            New inquiry strings are needed for Compaq devices.

        Resolution:
            New inquiry strings are added for Compaq devices.

        Id = HSLco35035
            In case that NDMP backup contains large number of
            files, Backup Media Agent uses large amount of memory.

        Resolution:
            Backup Media Agent memory usage is improved so it can
            backup up to 5 million files.

        Id = HSLco35178
            Sometimes it is possible that eject operation fails
            after the medium header verification.

        Resolution:
            Additional medium rewind operation is added before the
            offline operation.

        Id = HSLco35450
            Auto configuration of Overland Data Neo Series
            LXN2000 and Neo Series LXN4000with Quantum
            SDLT220 tape drives does not work because of
            inquiry strings missing.

        Resolution:
            Inquiry strings are added for auto configuration.

        Id = HSLco35670
            Message is implying that medium verification has been
            done although only the medium header sanity check has
            been performed.

        Resolution:
            Message is changed to:

              "Medium header verification completed".

            Part of SSPUX410_028.

        Id = HSLco35704
            When performing bulk eject media agent aborts session.

        Resolution:
            Ejecting tape from mailslot works properly.

        Id = HSLco36329
            If during the backup connection between BMA and UMA
            is broken and no IPC error is reported, BMA terminates
            when it fails to instruct UMA to unload the tape.

        Resolution:
            New instance of UMA is started.

        Id = HSLco36526
            Devbra and sanconf are limited to 10 character serial
            numbers only. When there are devices with 12 digit
            SN detected, devbra truncates the last two digits.
            As a result, several physical devices are then treated
            as one and the same device.

        Resolution:
            Devbra is using all digits of the device SN to
            distinguish between devices.

            Part of SSPUX410_040.

        Id = HSLco36656
            Reading and accessing the Cell Manager info resulted
            in xma ending abnormally.

        Resolution:
            Source code for updating Cell Manager info has been
            modified slightly.

        Id = HSLco35925
            Media Agent protocol is incorrect for the devices
            with multi-host connection.

        Resolution:
            Media Agent protocol is improved for the devices using
            multi-host connections.

            Part of SSPUX41_031.

        Id = HSLco36147
            Solaris Media Agent is not capable of handling SCSI
            sense information bigger than 144 bytes.
            Problem typically occurs in combination with certain
            types of SAN FC switches/drivers.

        Resolution:
            Buffer receiving SCSI sense information is increased.

            Part of SSPUX410_035.

        Id = HSLco36472
            Media Agent is not able to write beyond 2GB limitation
            on file devices.

        Resolution:
            The 2Gb limitation on file devices is increased.

            Part of SSPUX410_037.

        Id = HSLco37281
            OmniBack II does not support FC devices on
            AIX platform.

        Resolution:
            Support for FC devices on AIX platform is added.

            Part of SSPUX410_038.

        Id = HSLco36985, HSLco36532
            Ascii to Unicode conversions of large number of
            filenames generate stack overflow while transferring
            the catalog information.

        Resolution:
            Function for Ascii to Unicode conversion is replaced.

            Part of SSPUX410_042.

        Id = HSLco36901
            In case that backup to direct access devices contains
            large number of small files, it is possible that
            catalog size is bigger than space available on medium.
            Because of this backup fails to write complete catalog
            to the medium.

        Resolution:
            Calculation of space needed for catalog is improved in
            order not to exceed available space.

        Id = HSLco36135
            New values are returned by SN6000.

        Resolution:
            New returned values for SN6000 are supported.

        Id = HSLco36960
            OmniBack II does not work correctly with 9840 device
            which product ID starts with "T9840".

        Resolution:
            Media Agent is improved in order to support 9840
            devices which product ID starts with "T9840".

        Id = JAGae28035
            Automatic cleaning does not work if library does not
            have barcode support.

        Resolution:
            New OmniBack II environment variable is added:
            OB2CLNSLOT. Variable has to be set on Media Agent host
            and has to contain number of Cleaning slot configured
            for the library.

        PHSS_26357:
        Id = HSLco33017
            When split library in SAN environment is assigned to
            2 systems and "omnimm -eject" is run on host B, host A
            can no longer access the changer.

        Resolution:
            Library robotic mechanism is released after tape
            eject.

        Id = HSLco33264
            Not all information is written to the debug.log after
            I/O drive status error occurs.

        Resolution:
            Information is added to the debug.log file.

        Id = HSLco33563
            With OmniBack II A.04.00 release verification of DA
            block part is introduced. In case that data length for
            the data record is "0", verify reports an error.

        Resolution:
            Verify is changed in order to ignore "0" data length
            for data record, because this does not influence data
            restore.

            Part of SSPUX410_016.

        Id = HSLco33982
            In case that STK 9940 drives are configured as T9840,
            query does not work correctly because OB2 expects that
            those drives are configured as type 3590.

        Resolution:
            Configuration for STK 9940 is changed in order to be
            recognized as T9840 media type.

        Id = HSLco34050
            In case in which reconnect option is used for backup,
            it is possible that Media Agent fails due to a protocol
            error.

        Resolution:
            Protocol between Session Manager and Media Agent is
            changed in order not to acknowledge normal formatted
            messages.

            Complete functionality of this fix will be available
            when Cell Server patch PHSS_26353/PHSS_26354 is
            installed - or successors of it.

            Part of SSPUX410_017.

        Id = HSLco34139
            Header verification can not handle a dirty drive
            situation.

        Resolution:
            If OmniBack II detects cleaning tape medium header is
            not checked before unloading.

        Id = HSLco34266
            When loading a tape medium header check is run. If the
            medium is foreign or blank OmniBack II aborts backup
            session.

        Resolution:
            If loaded tape is foreign or blank OmniBack II does not
            check medium header when closing device.

        Id = NSMbb44407
            In order for Sony DTF device to work correctly,
            "OB2DBD=1" entry has to be added to omnirc file.

        Resolution:
            Entry for Sony DTF drive is updated in order to make
            the device work correctly without omnirc entry.

        PHSS_26219:
        Id = HSLco30584 SR: H555006666
            Medium header verification is not implemeted.

        Resolution:
            Environment variable OB2DISABLEHEADERCHECK is
            introduced.
            Medium header is checked by default. Setting the
            variable to 1 in /opt/omni/.omnirc file turns the
            functionality off.

        Id = HSLco31274
            DAS Media Agent is checking incorrect environment
            variable.

        Resolution:
            Setting environment variable OB2DASDRIVESTATUS2 to 1
            in the /opt/omni/omnirc file makes usage of more than
            15 drives possible.

        Id = HSLco31293
            Query operation hangs when performed on GRAU
            libraries with more than 1000 tapes.

        Resolution:
            Query operation can handle more than 1000 tapes
            within GRAU library.

        Id = HSLco31696
            LTO drives are not supported with Omniback ACS
            integration.

        Resolution:
            Omniback ACS integration supports LTO drives.

        Id = NSMbb44086
            NDMP Media Agent packages do not contain devbra.

        Resolution:
            devbra is added to NDMP Media Agent packages.

        Id = HSLco30326
            OmniBackII A.04.10 does not support HP VS80 and
            Benchmark VS640 libraries.

        Resolution:
            OmniBackII A.04.10 supports HP VS80 and Benchmark VS640
            libraries on HP-UX, Linux and Sun Solaris systems.

            Part of SSPUX410_002.

        Id = HSLco32416
            In case that reconnect option is used and OB2PORTRANGE
            environment variable is set, it is possible that
            reconnect occurs at the beginning of the session
            due to incorrectly set timeout.

        Resolution:
            Timeout is set to correct value.

SR:
        H555009101 H555009859 H555009315 H555009018 H555009027
        H555009407 H555009139 H555006826 H555008870 H555009095
        H555008826 H555009078 H555008728 H555008179 H555008747
        H555008496 H555007993 8606263710 B555014660 H555008050
        H555008421 H555008610 H555008242 H555008504 H555006734
        H555008328 H555008634 H555008608 H555008428 H555008662
        H555008680 H555008834 H555008753 H555008555 H555008655
        B555013119 H555007739 H555007700 H555007798 H555007513
        H555007381 H555007663 H555007269 B555012905 H555006885
        H555006608 H555007051 H555006798 H555006790 H555006666

Patch Files:
        /opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
                A.04.10/packet.Z

what(1) Output:
        /opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
                A.04.10/packet.Z:
                None

cksum(1) Output:
        1486778762 2442893 /opt/omni/databases/vendor/ma/hp/s800/
                hp-ux-1020/A.04.10/packet.Z
        4052295106 2443071 /opt/omni/databases/vendor/ma/hp/s800/
                hp-ux-11/A.04.10/packet.Z
        3094311167 2055663 /opt/omni/databases/vendor/ma/gpl/i386/
                linux-60/A.04.10/packet.Z
        1778647469 2138828 /opt/omni/databases/vendor/ma/ibm/rs6000/
                aix-42/A.04.10/packet.Z
        2233245699 1868914 /opt/omni/databases/vendor/ma/sco/i386/
                sco_sv/A.04.10/packet.Z
        3178890692 2101773 /opt/omni/databases/vendor/ma/sequent/
                i386/dynix/A.04.10/packet.Z
        2522069662 2405669 /opt/omni/databases/vendor/ma/siemens/
                r400/sinix/A.04.10/packet.Z
        3049575455 2396864 /opt/omni/databases/vendor/ma/sun/sparc/
                solaris-26/A.04.10/packet.Z
        3613476845 3001827 /opt/omni/databases/vendor/acs/hp/s800/
                hp-ux-11/A.04.10/packet.Z
        100167657 3001067 /opt/omni/databases/vendor/acs/hp/s800/
                hp-ux-1020/A.04.10/packet.Z
        3489653480 3000611 /opt/omni/databases/vendor/acs/sun/sparc/
                solaris-26/A.04.10/packet.Z
        3242408115 2685613 /opt/omni/databases/vendor/acs/ibm/
                rs6000/aix-42/A.04.10/packet.Z
        1607133819 2560073 /opt/omni/databases/vendor/das/hp/s800/
                hp-ux-11/A.04.10/packet.Z
        3739291639 2567581 /opt/omni/databases/vendor/das/hp/s800/
                hp-ux-1020/A.04.10/packet.Z
        2695531049 2534099 /opt/omni/databases/vendor/das/ibm/
                rs6000/aix-42/A.04.10/packet.Z
        2388816155 2895342 /opt/omni/databases/vendor/ndmp/hp/s800/
                hp-ux-1020/A.04.10/packet.Z
        155584380 2890980 /opt/omni/databases/vendor/ndmp/hp/s800/
                hp-ux-11/A.04.10/packet.Z
        2225408463 2772759 /opt/omni/databases/vendor/ndmp/sun/
                sparc/solaris-7/A.04.10/packet.Z
        2868937580 2880123 /opt/omni/databases/vendor/fxma/hp/s800/
                hp-ux-1020/A.04.10/packet.Z
        2193838621 2877571 /opt/omni/databases/vendor/fxma/hp/s800/
                hp-ux-11/A.04.10/packet.Z
        1186704692 2746508 /opt/omni/databases/vendor/fxma/sun/
                sparc/solaris-26/A.04.10/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
        If any newer SSP for the Media Agent is installed
        on your system, you must re-apply the SSP after
        installing this Media Agent patch.

        If the Cell Server is running on HP-UX, then the
        Cell Server patch PHSS_27454/PHSS_27455 (or later)
        for HP-UX must be installed before this Media Agent
        patch. If this is not done, the connection between
        Media Agents and Cell Server will no longer work.

        In a mixed environment, if the Cell Server is running
        on Windows NT/2000, then Cell Server patch
        OMNIBACK_00061 (or later) must be installed at the
        same time.

        PHSS_27602:
        Release Date: Available
        Id = HSLco36656 SR:H555008680
        Id = HSLco35035 SR:H555008242
        Id = HSLco34050 SR:H555007700
        PHSS_27602 is required for these defect fixes.

        PHSS_27587:
        Release Date: Available
        Id = HSLco36526 SR: B555014660
        PHSS_27587 is required for this defect fix.

Supersedes:
        PHSS_26219 PHSS_26357 PHSS_27458

Equivalent Patches:
        PHSS_28334:
        s700: 11.00 11.11 11.20
        s800: 11.00 11.11 11.20

Patch Package Size: 53080 KBytes

Installation Instructions:
        Please review all instructions and the Hewlett-Packard
        SupportLine User Guide or your Hewlett-Packard support terms
        and conditions for precautions, scope of license,
        restrictions, and, limitation of liability and warranties,
        before installing this patch.
        ------------------------------------------------------------
        1. Back up your system before installing a patch.

        2. Login as root.

        3. Copy the patch to the /tmp directory.

        4. Move to the /tmp directory and unshar the patch:

                cd /tmp
                sh PHSS_28333

        5a. For a standalone system, run swinstall to install the
            patch:

                swinstall -x autoreboot=true -x match_target=true \
                        -s /tmp/PHSS_28333.depot

        By default swinstall will archive the original software in
        /var/adm/sw/patch/PHSS_28333. If you do not wish to retain a
        copy of the original software, you can create an empty file
        named /var/adm/sw/patch/PATCH_NOSAVE.

        WARNING: If this file exists when a patch is installed, the
                 patch cannot be deinstalled. Please be careful
                 when using this feature.

        It is recommended that you move the PHSS_28333.text file to
        /var/adm/sw/patch for future reference.

        To put this patch on a magnetic tape and install from the
        tape drive, use the command:

                dd if=/tmp/PHSS_28333.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
        PHSS_28333:
        NOTE!
        This Patch has to be installed on the Installation
        Server host.

        The OB2 Media Agent must be redistributed to the Media
        Agent client system(s) after the installation of the patch
        in order to get the fixes into effect.

        For distribution of the Media Agent, refer to the
        OmniBackII Installation guide.

        Patch includes the following Site Specific Patches:
           SSPUX410_002
           SSPUX410_016
           SSPUX410_017
           SSPUX410_028
           SSPUX410_031
           SSPUX410_035
           SSPUX410_037
           SSPUX410_038
           SSPUX410_040
           SSPUX410_042
           SSPUX410_045
           SSPUX410_049
           SSPUX410_057
           SSPUX410_058
-----End of Document ID: PHSS_28333------------------------------------------


Document ID: PHSS_28584
Date Loaded: 20030318
      Title: s700_800 10.20 OV OB4.10 patch - CORE packet

Patch Name: PHSS_28584

Patch Description: s700_800 10.20 OV OB4.10 patch - CORE packet

Creation Date: 03/02/24

Post Date: 03/03/18

Hardware Platforms - OS Releases:
        s700: 10.20
        s800: 10.20

Products:
        OmniBackII A.04.10

Filesets:
        OMNIBACK-II.OMNI-CORE-IS,A.04.10
        OMNIBACK-II.OMNI-JPN-LS-P,A.04.10
        OMNIBACK-II.OMNI-INTEG-P,A.04.10

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28584

Symptoms:
        PHSS_28584:
        Id = HSLco40059 SR: H555009621
            Backup of Oracle8 database reports the following
            warning:

             "Warning: Invalid environment setting".

        Id = HSLco36196 SR: H555008622
            Installation and configuration packages do not exist
            for IBM AIX 5L operating system.

        PHSS_28232:
        Id = HSLco36659 SR: H555008681
            When using command "omnidb -help", -msese argument is
            not displayed.

        Id = HSLco37433 SR: H555008856
            When restoring Object with using "Interval",
            in the restore Graphical User Interface
            the following message is displayed:

            "Bad catalog access for message #10928 in set 12".

        Id = HSLco37754 SR: H555008900
            In Cell Manager environment with large number of
            clients, when operations like check_installation or
            add_components are performed at the same time on all
            clients, the error message appears for the linux
            clients:

              "|Critical| <host>: Unsupported architecture/OS type
                   (<host> <time>)
                   Skipping client!".

        Id = HSLco38032 SR: H555008977
            During Oracle Split Mirror Backup Data Protector
            displays error:

             "Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
              cannot create
              Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
              cannot open
              |Major| From: ob2rman.exe<hostname> "<barlist_name>"
               Time: mm/dd/yy hh:mm:ss
              The Production Database is not in automatic archival
              mode.
              Please set log_archive_start = true in your init.ora
              file".

        Id = HSLco38113 SR: H555009015
            Check Installation feature fails for Red Hat 8.0 Linux
            clients.

        Id = HSLco38384 SR: H555009084
            Installation of Red Hat 8.0 Linux client fails.

        Id = HSLco37977 SR: H555008950
            After running "omnidbutil -cdbsync" the Catalog
            Database (CDB) is lost.

        Id = HSLco39544 SR: H555009435
            Restore session on HP-UX with vxfs 3 reports error:

              "Cannot restore ACLs"

            for every file restored.

        PHSS_27456:
        Id = HSLco33764 SR:H555007590
            OmniBack II does not check into what slot mediums were
            entered when mount request is confirmed.

        Id = HSLco34641 SR:H555008020
            "Restore to another instance field" is missing in
            SQL 2000 restore context.

        Id = HSLco35716 SR:H555008511
            Data protection and catalog protection date for same
            object differs for one day.

        Id = JAGad92807 SR:8606223711
            The current link in the Info menu is labeled
            'OmniBack II FAQ' and it points to:

              http://ovweb3.external.hp.com/ovfaq

        Id = JAGae08985 SR:8606241727
            Upgrade fails on non HP-UX UNIX clients if OmniBack II
            port is not default.

        PHSS_26349:
        Id = HSLco32873 SR: H555007218
            When restoring files in an interval that
            does not include full backup the following error
            appears:

               "DB unknown error".

        PHSS_25964:
        Id = HSLco31142 SR: H555006771
            Load balancing is not working properly.

        Id = JAGad96899 SR: 8606227839
            Omniback II does not support Ext3 filesystem on
            Linux systems.

        Id = HSLco32089 SR: H555006968
            Autorecover fails with:

             "Current medium is refused for restore. Aborting!".

        Id = HSLco31949 SR: H555006942
            OmniBack II A.04.10 GUI abnormally ends when trying to
            connect to OmniBack II A.04.00 Cell Manager.

Defect Description:
        PHSS_28584:
        Id = HSLco40059
            Command "util_cmd -getopt" outputs random data in cases
            when empty "Enviroment" subsection in /etc/hosts is
            found. This happens because random data is collected
            from uninitialized buffer filled during the previous
            execution of util_cmd.

        Resolution:
            Buffer containing "-getopt" data is re-initialized
            before every execution.

        Id = HSLco36196
            Installation and configuration packages do not exist
            for IBM AIX 5L operating system.

        Resolution:
            Installation and configuration packages are added
            for IBM AIX 5L operating system.

        PHSS_28232:
        Id = HSLco36659
            Argument "-msese" is missing in the catalog.

        Resolution:
            Argument "-msese" is added in the catalog.

        Id = HSLco37433
            Message for restoring Object with using "Interval"
            is not added to Japanese message catalog.

        Resolution:
            Message catalog is updated.

        Id = HSLco37754
            When adding components to more Linux clients the
            variable which holds the index to machine type is
            changing, so the machine type matching is not
            successful.

        Resolution:
            Algorithm for unix platform is changed.

        Id = HSLco38032
            The /var/opt/omni/tmp/smb.(PID) file is not removed
            at the completion of the smb_common.sh script.
            When the PID is duplicated then the new
            /var/opt/omni/tmp/smb.(PID) file can not be created.

        Resolution:
            The /var/opt/omni/tmp/smb.(PID) file is removed
            at the completion of the smb_common.sh script.

            Part of SSPUX410_047.

        Id = HSLco38113
            Red Hat 8.0 Linux command "nslookup" outputs an extra
            message which causes Check Installation to fail.

        Resolution:
            "-silent" option is used when running Check Installation
            feature on Red Hat 8.0 Linux clients.

        Id = HSLco38384
            Default installation of Red Hat 8.0 Linux operating
            system does not contain "uncompress" utility.

        Resolution:
            Data Protector installation on Red Hat 8.0 Linux uses
            one of the default decompressing utilities.

        Id = HSLco37977
            If "omnidbutil -cdbsync" is started on the
            Manager-of-Managers client, local Media Management
            Database (MMDB) is used for database synchronization.

        Resolution:
            If command "omnidbutil -cdbsync" is running
            on a Manager of Mangers(MOM) client, it issues
            an error message and stops the operation.

        Id = HSLco39544
            While restoring Minor error is reported for every file.

        Resolution:
            Message "Destination file system does not support ACLs!"
            is reported once, and then further occurences of the
            error message are suppressed.

        PHSS_27456:
        Id = HSLco33764
            Before loading medium on mount request confirmation
            database is not checked properly.

        Resolution:
            On mount request confirmation database is checked
            properly.

        Id = HSLco34641
            "Restore to another instance" combo box for displaying
            instances installed on SQL Server 2000 is missing.

        Resolution:
            "Restore to another instance" combo box is added.

        Id = HSLco35716
            Data protection value is improperly calculated.

        Resolution:
            Data protection calculation is improved.

        Id = JAGad92807
            This page is outdated. It must be labeled 'eCare
            Support' and it must point to:

              http://support.openview.hp.com/support.jsp?FromPROD
              =ob_4_1

        Resolution:
            Label and links are fixed.

        Id = JAGae08985
            Check for echo command is not done correctly.

        Resolution:
            Checking mechanism is corrected.

        PHSS_26349:
        Id = HSLco32873
            Selecting files for restore within interval that
            does not include the full backup will trigger
            an error.

        Resolution:
            The error is marked and send to the Graphical User
            Interface (GUI), which displays a message:

                "You have chosen an interval which
                 doesn't include all the sessions needed to
                 compose a full restore chain. Please reconnect
                 to the Cell Server."

        PHSS_25964:
        Id = HSLco31142
            There is no warning reported when one creates a
            datalist or a barlist with load balancing enabled and
            minimum number of devices greater than number of
            configured logical devices.

        Resolution:
            New warning is added.

        Id = JAGad96899
            Omniback II does not support Ext3 filesystem on
            Linux systems.

        Resolution:
            Omniback II supports Ext3 filesystem on Linux systems.

        Id = HSLco32089
            There are duplicated strings in the messages reported
            by OmniBack during autorecover.

        Resolution:
            Duplicated messages are removed from message catalog.

        Id = HSLco31949
            Any attempt to establish connection to OmniBack II
            A.04.00 Cell Manager from OmniBack II A.04.10 GUI,
            when having no permissions to do so, results in
            core dump of OmniBack II A.04.10 GUI.

        Resolution:
            Message "No permission" is displayed when one tries to
            connect to a system where one does not have
            sufficient permissions.

            Part of SSPUX410_004.

SR:
        H555009621 H555008622 H555008891 H555008856 H555008667
        H555008686 H555009015 H555008977 H555008900 H555008632
        H555008641 H555008651 H555009435 H555009084 H555008950
        H555008681 H555008807 H555008020 8606241727 8606223711
        H555007590 H555008511 H555007218 8606227839 H555006942
        H555006968 H555006771

Patch Files:
        /opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
                require.dat
        /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-1020/
                A.04.10/packet.Z
        /opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
                require.dat
        /opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
                packet.Z
        /opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
                require.dat
        /opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
                A.04.10/packet.Z
        /opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar
        /opt/omni/databases/utils/gpl/i386/linux-60/utils.tar
        /opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar
        /opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar
        /opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar
        /opt/omni/databases/utils/ibm/rs6000/aix-51/utils.tar
        /opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar
        /opt/omni/databases/utils/sco/i386/sco_sv/utils.tar
        /opt/omni/databases/utils/sco/i386/unixware/utils.tar
        /opt/omni/databases/utils/sequent/i386/dynix/utils.tar
        /opt/omni/databases/utils/sgi/mips/irix-62/utils.tar
        /opt/omni/databases/utils/siemens/r400/sinix/utils.tar
        /opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar
        /opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar
        /opt/omni/lbin/bmsetup
        /opt/omni/lbin/.CII_CORE-IS

what(1) Output:
        /opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
                require.dat:
                None
        /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-1020/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
                require.dat:
                None
        /opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
                packet.Z:
                None
        /opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
                require.dat:
                None
        /opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
                A.04.10/packet.Z:
                None
        /opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar:
                None
        /opt/omni/databases/utils/gpl/i386/linux-60/utils.tar:
                None
        /opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar:
                None
        /opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar:
                None
        /opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar:
                None
        /opt/omni/databases/utils/ibm/rs6000/aix-51/utils.tar:
                None
        /opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar:
                None
        /opt/omni/databases/utils/sco/i386/sco_sv/utils.tar:
                None
        /opt/omni/databases/utils/sco/i386/unixware/utils.tar:
                None
        /opt/omni/databases/utils/sequent/i386/dynix/utils.tar:
                None
        /opt/omni/databases/utils/sgi/mips/irix-62/utils.tar:
                None
        /opt/omni/databases/utils/siemens/r400/sinix/utils.tar:
                None
        /opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar:
                None
        /opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar:
                None
        /opt/omni/lbin/bmsetup:
                [TZ=GMT0 /opt/omni/lbin/bmsetup -version]
                HP OpenView OmniBack II A.04.10: BMSETUP, internal b
                        uild PHSS_28584/PHSS_28585, built on Fri Feb
                         21 15:55:33 2003
        /opt/omni/lbin/.CII_CORE-IS:
                None

cksum(1) Output:
        2514441554 1857498 /opt/omni/databases/vendor/omnicf/dec/
                alpha/osf1-4/A.04.10/packet.Z
        741144604 1374909 /opt/omni/databases/vendor/omnicf/gpl/
                i386/linux-60/A.04.10/packet.Z
        2292762645 1761767 /opt/omni/databases/vendor/omnicf/hp/
                s800/hp-ux-1020/A.04.10/packet.Z
        649829836 1760215 /opt/omni/databases/vendor/omnicf/hp/s800/
                hp-ux-11/A.04.10/packet.Z
        1412485705 1610709 /opt/omni/databases/vendor/omnicf/ibm/
                rs6000/aix-42/A.04.10/packet.Z
        1351761271 18 /opt/omni/databases/vendor/omnicf/ibm/rs6000/
                aix-51/A.04.10/require.dat
        4106946195 1618513 /opt/omni/databases/vendor/omnicf/ibm/
                rs6000/aix-51/A.04.10/packet.Z
        4133457961 1565831 /opt/omni/databases/vendor/omnicf/ncr/
                i386/mp-ras/A.04.10/packet.Z
        800977094 1525263 /opt/omni/databases/vendor/omnicf/sco/
                i386/sco_sv/A.04.10/packet.Z
        1485170503 1496661 /opt/omni/databases/vendor/omnicf/sco/
                i386/unixware/A.04.10/packet.Z
        3206128836 1540527 /opt/omni/databases/vendor/omnicf/
                sequent/i386/dynix/A.04.10/packet.Z
        2274928665 1805595 /opt/omni/databases/vendor/omnicf/
                siemens/r400/sinix/A.04.10/packet.Z
        4065637527 1627341 /opt/omni/databases/vendor/omnicf/sun/
                sparc/solaris-26/A.04.10/packet.Z
        2275822429 2243755 /opt/omni/databases/vendor/omnicf/sgi/
                mips/irix-62/A.04.10/packet.Z
        821937929 13223651 /opt/omni/databases/vendor/jpn_ls/hp/
                s800/hp-ux-1020/A.04.10/packet.Z
        3679214014 13223683 /opt/omni/databases/vendor/jpn_ls/hp/
                s800/hp-ux-11/A.04.10/packet.Z
        827543209 2314175 /opt/omni/databases/vendor/integ/dec/
                alpha/osf1-4/A.04.10/packet.Z
        2556158646 17 /opt/omni/databases/vendor/integ/dec/alpha/
                osf1-4/A.04.10/require.dat
        1402062751 1572409 /opt/omni/databases/vendor/integ/gpl/
                i386/linux-60/A.04.10/packet.Z
        2620480197 2315928 /opt/omni/databases/vendor/integ/hp/s800/
                hp-ux-1020/A.04.10/packet.Z
        200191338 2318223 /opt/omni/databases/vendor/integ/hp/s800/
                hp-ux-11/A.04.10/packet.Z
        2831315120 2316099 /opt/omni/databases/vendor/integ/ibm/
                rs6000/aix-42/A.04.10/packet.Z
        2971867501 2319157 /opt/omni/databases/vendor/integ/ibm/
                rs6000/aix-51/A.04.10/packet.Z
        1351761271 18 /opt/omni/databases/vendor/integ/ibm/rs6000/
                aix-51/A.04.10/require.dat
        3586605298 2036159 /opt/omni/databases/vendor/integ/sun/
                sparc/solaris-26/A.04.10/packet.Z
        3999542511 51200 /opt/omni/databases/utils/dec/alpha/osf1-4/
                utils.tar
        998960559 51200 /opt/omni/databases/utils/gpl/i386/linux-60/
                utils.tar
        1152941383 40960 /opt/omni/databases/utils/hp/s800/
                hp-ux-1020/utils.tar
        1152941383 40960 /opt/omni/databases/utils/hp/s800/hp-ux-11/
                utils.tar
        3550848943 51200 /opt/omni/databases/utils/ibm/rs6000/
                aix-42/utils.tar
        3550848943 51200 /opt/omni/databases/utils/ibm/rs6000/
                aix-51/utils.tar
        1459754954 51200 /opt/omni/databases/utils/ncr/i386/mp-ras/
                utils.tar
        472814854 51200 /opt/omni/databases/utils/sco/i386/sco_sv/
                utils.tar
        472814854 51200 /opt/omni/databases/utils/sco/i386/unixware/
                utils.tar
        1459754954 51200 /opt/omni/databases/utils/sequent/i386/
                dynix/utils.tar
        3510794158 51200 /opt/omni/databases/utils/sgi/mips/irix-62/
                utils.tar
        2723478847 51200 /opt/omni/databases/utils/siemens/r400/
                sinix/utils.tar
        1867883458 51200 /opt/omni/databases/utils/sun/sparc/
                solaris-26/utils.tar
        320273293 51200 /opt/omni/databases/utils/sun/sparc/
                solaris-7/utils.tar
        2324326900 427211 /opt/omni/lbin/bmsetup
        274919816 71 /opt/omni/lbin/.CII_CORE-IS

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes:
        PHSS_25964 PHSS_26349 PHSS_27456 PHSS_28232

Equivalent Patches:
        PHSS_28585:
        s700: 11.00 11.11 11.20
        s800: 11.00 11.11 11.20

Patch Package Size: 63150 KBytes

Installation Instructions:
        Please review all instructions and the Hewlett-Packard
        SupportLine User Guide or your Hewlett-Packard support terms
        and conditions for precautions, scope of license,
        restrictions, and, limitation of liability and warranties,
        before installing this patch.
        ------------------------------------------------------------
        1. Back up your system before installing a patch.

        2. Login as root.

        3. Copy the patch to the /tmp directory.

        4. Move to the /tmp directory and unshar the patch:

                cd /tmp
                sh PHSS_28584

        5a. For a standalone system, run swinstall to install the
            patch:

                swinstall -x autoreboot=true -x match_target=true \
                        -s /tmp/PHSS_28584.depot

        By default swinstall will archive the original software in
        /var/adm/sw/patch/PHSS_28584. If you do not wish to retain a
        copy of the original software, you can create an empty file
        named /var/adm/sw/patch/PATCH_NOSAVE.

        WARNING: If this file exists when a patch is installed, the
                 patch cannot be deinstalled. Please be careful
                 when using this feature.

        It is recommended that you move the PHSS_28584.text file to
        /var/adm/sw/patch for future reference.

        To put this patch on a magnetic tape and install from the
        tape drive, use the command:

                dd if=/tmp/PHSS_28584.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
        PHSS_28584:
        NOTE!
        This Patch has to be installed on all Installation
        server hosts.

        Because the Core package is a part of all agents, all
        client packages need to be redistributed after this patch
        was installed on the installation server in order to
        enable the changes (Disk Agents, Media Agents, ...).

        Patch includes the following Site Specific Patches:
           SSPUX410_004
           SSPUX410_047
-----End of Document ID: PHSS_28584------------------------------------------

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]