|
Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com |
HP-UX series 800 10.X patch digest
From: IT Resource Center (support_feedback
us-support2-mail.external.hp.com)
Date: Sun Jun 29 2003 - 09:03:57 CDT
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
HP Support Information Digests
===============================================================================
o IT Resource Center World Wide Web Service
---------------------------------------------------
If you subscribed through the IT Resource Center and would
like to be REMOVED from this mailing list, access the
IT Resource Center on the World Wide Web at:
http://support.itrc.hp.com/
Login using your IT Resource Center User ID and Password.
Then select Support Information Digests (located under
Maintenance and Support). You may then unsubscribe from the
appropriate digest.
To download a patch referenced below, access the
IT Resource Center on the World Wide Web at:
http://support.itrc.hp.com/
Login using your IT Resource Center User ID and Password.
Then select Individual Patches (under Maintenance and Support)
to access the patch. You may also download a patch via anonymous
ftp(1) from ftp.itrc.hp.com.
===============================================================================
Digest Name: weekly HP-UX series 800 10.X patch digest
Created: Sun Jun 29 6:05:02 EDT 2003
Table of Contents:
Document ID Title
--------------- -----------
PHSS_29202 s700_800 10.20 CDE DevKit Patch
PHSS_28745 s700_800 10.20 OV OB4.10 patch - MA packet
PHCO_29280 s700_800 10.26 cumulative manpages patch
PHCO_29216 s700_800 10.26 libsecurity cumulative patch
PHSS_29137 s700_800 10.20 OV OB4.10 patch - CORE packet
PHSS_28742 s700_800 10.20 OV OB4.10 patch - SSEA packet
The documents are listed below.
-------------------------------------------------------------------------------
Document ID: PHSS_29202
Date Loaded: 20030627
Title: s700_800 10.20 CDE DevKit Patch
Patch Name: PHSS_29202
Patch Description: s700_800 10.20 CDE DevKit Patch
Creation Date: 03/05/30
Post Date: 03/06/27
Hardware Platforms - OS Releases:
s700: 10.20
s800: 10.20
Products:
CDE Developer Kit B.10.20.00 B.10.20.01 B.10.20.02
Filesets:
CDEDevKit.CDE-DEMOS,B.10.20.00,B.10.20.01,B.10.20.02
CDEDevKit.CDE-PRG,B.10.20.00,B.10.20.01,B.10.20.02
CDEDevKit.CDE-MAN-DEV,B.10.20.00,B.10.20.01,B.10.20.02
Automatic Reboot?: No
Status: General Release
Critical:
No (superseded patches were critical)
PHSS_22340: ABORT
PHSS_18426: CORRUPTION ABORT
PHSS_11148: HANG ABORT
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_29202
Symptoms:
PHSS_29202:
1. Problem with dtterm.
2. Problem with dtaction.
3. xterm, hpterm and dtterm were not
updating the wtmp file, when invoked
with -ls option.
PHSS_27878:
1. Invoking terminal with -e option does
not show correct IDLE time when viewed
by 'w' command.
2. Problem with dtspcd.
3. Changing certain CDE applications so
that they always use the message
catalogs in "/usr/dt/lib/nls/msg/%L".
4. Problems in DtSvc.
PHSS_25193:
1. kana_ME character cannot be entered into a CDE
workspace title.
PHSS_23799:
1. TT_AUTHFILE_ENTRY_MISSING error is not reported
correctly in syslog file.
2. libtt.1 seems to have unresolved external
references.
3. dtfile consumes cpu/memory when it tries to open
a folder of large size.
4. Buffer overflow in help search string causes core
dump.
5. Warnings in swagent.log file.
PHSS_22340:
1. Dtterm -tm to change a tty setting does not give
proper result, for invalid entries.
2. Core dump selecting text from display of CDE help
files.
3. dtterm cannot handle more than 32k savelines.
4. dtfile fails on NFS mounted files with no read
permissions.
5. dtterm problem with -tn option.
PHSS_20858:
1. "who -R" shows improper hostname who logged from
dtterm, hpterm, xterm when the hostname is greater
than 16 chars.
2. dtterm writes incorrect information in /etc/utmp,
hence "who -u" returns incorrect information.
3. Missing line feed("\n") while saving dtpad files.
PHSS_18426:
1. CDE - dtpad corrupts files without notice if
target filesystem is full.
2. dtpad fails to open large (>~30Mb) files.
3. ER: rpc.ttdbserver to exclude systems in
'tt_dbexclude' config file.
4. Problem with dtspcd.
5. Buffer overflow in libdthelp.
6. Core dump bringing up index box with DtHelp.
7. Permissions problem in /usr/dt/bin/dtterm.
8. Wants dtterm to have an option to flush
the log on each write.
9. root directory should not be in INFO file.
PHSS_15796:
1) Fixed buffer overflow in DtSvc.
2) dthelpview cannot display utf8 characters correctly.
3) "DtTermDisplaySend" function can not handle a string
greater than 1024 bytes
4) Unresolved symbol XtAppAddSignal caused by wrong
links in /usr/dt/lib
PHSS_14003:
1) ER: wants dtpad to show results of a find in the middle
of the display.
2) 11.00 dthelptag inserts HP-ROMAN8 as charset for C
locale.
3) CDE Development Kit man page directories have incorrect
permissions.
PHSS_12883:
1) dthelpprint - &ohm does not show up when helpfile is
printed.
2) dthelp does not handle &sigspace correctly.
PHSS_12139:
1) Fix condition whereby a string copy of an environment
variable can overflow the stack buffer causing various
applications to core dump.
PHSS_11148:
1) DtWsmSetCurrentWorkspace returns the wrong RETURN VALUE.
2) Helpviewer hangs on help volume for C++.
3) core dump as soon as help/contents asked to xsnapadmin,
or start.
4) HP CDE/VUE (newer version) adding 'newline' after
!!emphasized!! text.
PHSS_9885:
1) Duplicate symbol names in libDtSvc cause conflicts.
2) Index does not redisplay topic after choosing a second
different topic.
3) dthelpview -man doesn't manage the text widget
correctly if resize. ViewW.
4) dthelpview can't view a help volume index when one is
empty.
PHSS_8668:
1) libDtHelp uses the Default Visual and Default Root
window to set up GC's and the visual information.
Defect Description:
PHSS_29202:
1. Problem with dtterm.
Resolution:
The problem with dtterm is resolved.
2. Problem with dtaction.
Resolution:
The problem with dtaction is fixed.
3. dtterm, hpterm, and xterm do not create
entries in wtmp.
Resolution:
The xterm, hpterm and dtterm were modified
to update the /etc/wtmp file when invoked
with -ls option.
PHSS_27878:
1. xterm -e program fails to report
correct idle time when viewed by
'w' command.
Resolution:
The solution updates the access time of
the tty file whenever -e option of
terminal is used.
2. Problem with dtspcd.
Resolution:
Problem with dtspcd is resolved.
3. Changing certain CDE applications so
that they always use the message
catalogs in "/usr/dt/lib/nls/msg/%L".
Resolution:
dtsession, dtmail, dtaction, dtprintinfo and dtterm
are changed so that they always use the message catalogs
in "/usr/dt/lib/nls/msg/%L" and hpterm uses those in
"/usr/lib/nls/msg/%L".
4. Problems in DtSvc.
Resolution:
Problems in DtSvc are fixed.
PHSS_25193:
1. kana_ME character cannot be entered into a CDE
workspace title.
Resolution:
kana_ME character can be entered into a CDE
workspace title.
PHSS_23799:
1. TT_AUTHFILE_ENTRY_MISSING error not reported
correctly.
Resolution:
Proper error message "TT_AUTHFILE_ENTRY_MISSING" is
logged into syslog file, if TT_AUTHFILE is missing.
2. libtt.1 seems to have unresolved external
references.
Resolution:
libtt.1 does not have any unresolved external
references.
3. dtfile consumes cpu/memory when it tries to open
a folder of large size.
Resolution:
dtfile will not consume cpu/memory when it opens
folders of any size.
4. Problem in dtprintinfo.
Resolution:
Buffer overflow is prevented in libDtHelp to avoid
core dump.
5. PHSS_18426 postinstall script fails to swmodify IPD
for X11MotifDevKit.
Resolution:
Code is added to the postinstall script to modify the
IPD and eliminate the warnings in the swagent.log file.
PHSS_22340:
1. Dtterm -tm to disable a tty setting does not work.
Resolution:
Proper validation has been added so that the -tm
option in dtterm gives proper results for invalid entries.
2. Core dump selecting text from display of CDE help files.
Resolution:
Fix was done to make dthelpview function properly when
text is selected from display and scrolled down vertically.
3. dtterm cannot handle more than 32k saveLines.
Resolution:
The fix has been made in dtterm to make it handle more
than 32k savelines.
4. dtfile fails on NFS mounted file with no read
permissions.
Resolution:
Fix has been made so that dtfile will display a
NFS mounted file with no read permissions.
5. dtterm problem.
Resolution:
Error Checking has been introduced to avoid
the problem with dtterm -tn option.
PHSS_20858:
1. who -R shows improper hostname who logged from
hpterm, xterm, dtterm.
Resolution:
Fix was made so that "who -R" shows proper hostname
for users using dtterm, hpterm,xterm when the
hostname is greater than 16 chars.
2. Dtterm writes incorrect information in /etc/utmp,
hence " who -u" returns incorrect information.
Resolution:
Fix has been made in dtterm to write the correct
information in /etc/utmp."who -u" returns correct
values after the fix.
3. Customer requesting dtpad add a line feed when
a file is saved.
Resolution:
The line feed("\n") is added at the end of dtpad
text file while saving.
PHSS_18426:
1. CDE - dtpad corrupts files without notice if
target filesystem is full.
Resolution:
Checked the return status of the write calls to
monitor the error condition.
2. dtpad fails to open large (>~30Mb) files.
Resolution:
Fix involves display of error dialog when large
files opened through dtpad under low memory
conditions.
3. ER: rpc.ttdbserver to exclude systems in
'tt_dbexclude' config file.
Resolution:
Created capability for rpc.ttdbserver to exclude systems
from the ttdb list. This was done by considering the list
of hosts mentioned in /etc/tt/ttdb_exclude as hosts that
are not to be contacted.
4. Problem with dtspcd.
Resolution:
Error checking for limits has been added and
error dialogs are displayed when limits are
exceeded.
5. Buffer overflow in libdthelp.
Resolution:
Included checks for boundary validations in
Searchpath.
6. Core dump bringing up index box with DtHelp.
Resolution:
Dthelp was corrected to avoid core dump
while bringing up index box with a particular
Font set.
7. Permissions problem in /usr/dt/bin/dtterm.
Resolution:
The fix was made to set correct uid for
temporary files created.
8. Wants dtterm to have an option to flush
the log on each write.
Resolution:
The fix has been done to include the '-f'
option to flush the buffer on to the log file
as and when an entry is made on dtterm.
9. The actual mode, owner and group of CDEDevKit
filesets after installation does not match with
that given in the INFO file of all the CDEDevKit
filesets.
Resolution:
Added script in postinstall script to change
the ipd value of the root directory INFO.
PHSS_15796:
1) Fixed buffer overflow in DtSvc.
2) dthelpview cannot display utf8 characters correctly.
3) "DtTermDisplaySend" function can not handle a string
greater than 1024 bytes
4) Unresolved symbol XtAppAddSignal caused by wrong
links in /usr/dt/lib
PHSS_14003:
1) ER: wants dtpad to show results of a find in the middle
of the display.
2) 11.00 dthelptag inserts HP-ROMAN8 as charset for C
locale.
3) CDE Development Kit man page directories have incorrect
permissions.
PHSS_12883:
1) dthelpprint - &ohm does not show up when helpfile is
printed.
2) dthelp does not handle &sigspace correctly.
PHSS_12139:
1) Fix condition whereby a string copy of an environment
variable can overflow the stack buffer causing various
applications to core dump.
PHSS_11148:
1) DtWsmSetCurrentWorkspace returns the wrong RETURN VALUE.
2) Helpviewer hangs on help volume for C++.
3) core dump as soon as help/contents asked to xsnapadmin,
or start.
4) HP CDE/VUE (newer version) adding 'newline' after
!!emphasized!! text.
PHSS_9885:
1) Duplicate symbol names in libDtSvc cause conflicts.
2) Index does not redisplay topic after choosing a second
different topic.
3) dthelpview -man doesn't manage the text widget
correctly if resize. ViewW.
4) dthelpview can't view a help volume index when one is
empty.
PHSS_8668:
1) libDtHelp uses the Default Visual and Default Root
window to set up GC's and the visual information.
SR:
8606296536 8606296537 8606193796 8606235437 8606225329
8606231863 8606280479 8606181140 8606144170 8606156317
8606178908 8606183236 8606131946 5003462663 8606108885
8606125281 8606126450 8606155712 8606102998 8606104358
5003432401 5003360545 4701421487 4701410621 1653257485
5003386656 5003394171 4701336693 5003342246 1653199927
5003362095 1653211110 4701369611 4701369629
Patch Files:
/usr/dt/share/examples/dtterm/Makefile
/usr/dt/lib/libDtHelp.a
/usr/dt/lib/libDtSvc.a
/usr/dt/lib/libDtWidget.a
/usr/dt/lib/libDtTerm.a
/usr/dt/share/man/man3.Z/DtWsmSetCurrentWorkspace.3
/usr/dt/lib/libtt.a
what(1) Output:
/usr/dt/lib/libDtHelp.a:
libDtHelp: $Revision: 2.12 $
X Window System, Version 11 R6+ HP-UX B.10.20.00 CDE
Patch Release
(build date: Fri Oct 11 16:43:02 IST 2002)
/usr/dt/lib/libDtSvc.a:
libDtSvc: $Revision: 1.5 $
X Window System, Version 11 R6+ HP-UX B.10.20.00 CDE
Patch Release
(build date: Mon May 26 19:47:06 IST 2003)
/usr/dt/lib/libDtWidget.a:
libDtWidget: $Revision: 1.4 $
X Window System, Version 11 R6+ HP-UX B.10.20.00 CDE
Patch Release
(build date: Fri Oct 11 16:40:50 IST 2002)
/usr/dt/lib/libDtTerm.a:
DtTermPrimitiveWidget: $Revision: 1.196 $
libDtTerm: $Revision: 1.172 $
X Window System, Version 11 R6+ HP-UX B.10.20.00 CDE
Patch Release
(build date: Mon May 26 20:53:39 IST 2003)
/usr/dt/lib/libtt.a:
X Window System, Version 11 R6+ HP-UX B.10.20.00 May
2001 Patch Release
(build date: Sat Apr 7 06:14:44 IST 2001)
/usr/dt/share/man/man3.Z/DtWsmSetCurrentWorkspace.3:
None
/usr/dt/share/examples/dtterm/Makefile:
None
cksum(1) Output:
3679151826 881074 /usr/dt/lib/libDtHelp.a
291779299 718048 /usr/dt/lib/libDtSvc.a
1013722336 327608 /usr/dt/lib/libDtWidget.a
2738717924 453104 /usr/dt/lib/libDtTerm.a
860967532 1588642 /usr/dt/lib/libtt.a
1349443970 1253 /usr/dt/share/man/man3.Z/
DtWsmSetCurrentWorkspace.3
2774786901 1190 /usr/dt/share/examples/dtterm/Makefile
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHSS_8668 PHSS_9885 PHSS_11148 PHSS_12139 PHSS_12883 PHSS_14003
PHSS_15796 PHSS_18426 PHSS_20858 PHSS_22340 PHSS_23799 PHSS_25193
PHSS_27878
Equivalent Patches: None
Patch Package Size: 1390 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_29202
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHSS_29202.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHSS_29202. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHSS_29202.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_29202.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
The CDE environment must not be running when this
patch is installed. The CDE environment can be shut
down by running the following commands as root:
- /usr/dt/bin/dtconfig -d
- /usr/dt/bin/dtconfig -kill
Note that these commands will terminate all CDE sessions
for all CDE users.
Once the patch has been installed, you may start CDE
back up with the following commands:
- /usr/dt/bin/dtconfig -e
- /sbin/init.d/dtlogin.rc start
-----End of Document ID: PHSS_29202------------------------------------------
Document ID: PHSS_28745
Date Loaded: 20030627
Title: s700_800 10.20 OV OB4.10 patch - MA packet
Patch Name: PHSS_28745
Patch Description: s700_800 10.20 OV OB4.10 patch - MA packet
Creation Date: 03/06/23
Post Date: 03/06/27
Hardware Platforms - OS Releases:
s700: 10.20
s800: 10.20
Products:
OmniBackII A.04.10
Filesets:
OMNIBACK-II.OMNI-ACS-P,A.04.10
OMNIBACK-II.OMNI-DAS-P,A.04.10
OMNIBACK-II.OMNI-HPUX-P,A.04.10
OMNIBACK-II.OMNI-OTHUX-P,A.04.10
OMNIBACK-II.OMNI-FXMA-P,A.04.10
OMNIBACK-II.OMNI-NDMP-P,A.04.10
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28745
Symptoms:
PHSS_28745:
Id = HSLco38298 SR:H555009054
Backup fails with an error:
"|Critical| From: BMA<host> "<device>" Time:<time>
|90:30| SM/MA protocol error => aborting"
Id = HSLco39535 SR:H555009430
Sanconf does not recognize the device that does not
have the /dev/rmt/*mn file name standard.
Id = HSLco40131 SR:H555009630
Restore session from physically write protected tapes
fails with following error message:
"|Major| From: RMA-NDMPhostname.com <host> <time>
Cannot open device (The medium is Write Protected.)"
Id = HSLco40554 SR:H555009873
Format of SuperDLT tape fails with an error:
"|Critical| From: <host> "datalist" <time>
|90:41| Invalid device type specified (14) =>
aborting".
Id = HSLco40634 SR:H555009914
TapeAlert functionality for detecting dirty drives is
disabled by default.
Id = HSLco40877 SR:H555010030
During NDMP Backup Session Omniback II Database gets
corrupted, which can be detected by running a
"omnidbcheck -sibf" command .
Id = HSLco41099 SR:H555010150
Backup session fails with an error:
"|Minor| From: <host> "datalist" <time>
|90:190| Invalid format version of OmniBack
II medium."
Id = HSLco41118 SR:H555010157
Device T9840 is not supported.
Id = HSLco41191 SR:H555010199
NDMP restore of the appending backup fails on EMC Calera
systems.
Id = HSLco41222 SR:H555010214
Autoconfiguration of Bnchmark VS160, Compaq VS160,
HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
FastStor 2 Autoloader, HP SS1016 Artic Wolf, HP MSL6000
Series, HP ESL9000 Series, SEAGATE DAT DAT 06241-xxx
and Spectra-Logic Gator libraries fails.
Id = HSLco41392 SR:H555010277
There are inconsistencies in output of silo query
command. Comparing the output of two commands: "omnimm
-repository" and "omnimm -silo_query" returuns different
results.
Id = HSLco41551 SR:H555010317
Tape does not get unloaded at the end of the backup
session.
Id = HSLco41583 SR:H555010332
Media Agent fails when it tries to connect to the STK
library if logical drive name is different from user id.
Id = HSLco41800 SR:H555010392
ACS and DAS Media Agent do not create tape statistics
logs.
PHSS_28333:
Id = HSLco31403 SR: H555006826
Tape is not marked poor after append fails.
Id = HSLco37256 SR: H555008826
Restore of incrementally backed up objects fails.
Id = HSLco37582 SR: H555008870
"ssi.sh" script fails with error:
"/opt/omni/acs/ssi.sh|17|: grep: not found.
Starting ACS daemons...
/opt/omni/acs/ssi.sh|4|: ps: not found.
/opt/omni/acs/ssi.sh|4|: grep: not found.
Problems starting ACS Event Logger
Unsuccessful in starting ACS daemons".
Id = HSLco38124 SR: H555009018
OmniBack II is not gathering tape I/O operation
statistics.
Id = HSLco38160 SR: H555009027
OmniBack II does not show the copy progress of tapes
in the GUI/CLI session report.
Id = HSLco38372 SR: H555009078
Autoconfiguration of Mammoth2 device fails.
Id = HSLco38412 SR: H555009095
When running backup and "omnimm -silo_query" command
at the same time, status of tapes that are used for
backup is set to "non resident".
Id = HSLco38420 SR: H555009101
Initialization of Magneto Optical (MO) medium fails
with error:
"|Major| From: MMA<host> "device" Time: <time>
|90:129| Medium has no capacity."
Id = HSLco38492 SR: H555009139
Media Agent reports errors:
"|Minor| From: BMA<host> "<device>" Time: <time>
|90:197| Could not read data (attribute
ID=AUX_OMNIBACK_MEDIA_HEADER) from cartridge memory ().
|Minor| From: BMA<host> "<device>" Time:<time>
|90:198| Could not write data (attribute
ID=<Host attributes>) from cartridge memory ()."
Id = HSLco39232 SR: H555009315
Backup fails with error:
"|Major| From: BMA<host> "<device>" Time: <time>
|90:51| |16| Device busy
Cannot write to device ((NULL))"
Id = HSLco39489 SR: H555009407
OmniBack II is performing unnecessary cleanings on
DLT drives.
Id = HSLco40523 SR: H555009859
Even if "OB2ACS_VOLUMEDRIVE_POOR=1" option is enabled
in ".omnirc" file, OmniBack II does not mark tape as
"Poor" in case tape mount operation fails with
ACS error: "STATUS_VOLUME_IN_DRIVE".
PHSS_27458:
Id = HSLco30962, HSLco35407 SR: H555006734, H555008421
When testing the drive cleaning configuration
using OmniBack II dirty drive simulation method
on DDS4 autoloader DAT40x6i/e the tape
unload fails with the following error message:
"[12:5] Internal error in
("/src/ma/pol/polmax.c /main/r31_split/3":565)
=> process aborted
This is an unexpected condition and is likely
due to a combination of circumstances involving
both this product and the operating system.
Report this error to your post-sales OmniBack II
Support Representative."
Id = HSLco34581 SR: H555007993
devbra is not working properly with devices in
environments where "st_san_safe" kernel parameter
is enabled.
Id = HSLco34684 SR: H555008050
Backup on LTO device on AIX platform fails with error:
"Cannot close after write problem. ([5] There is an
input or output error.)"
Id = HSLco34910 SR: H555008179
New inquiry strings are needed for Compaq devices.
Id = HSLco35035 SR: H555008242
During backup of NDMP integration Backup Media Agent
session completes with failures.
Id = HSLco35178 SR: H555008328
Backup fails with error:
"[90:135] Can not eject medium. ([5] I/O error)"
Id = HSLco35450 SR: H555008428
Auto configuration of Overland Data Neo Series
LXN2000 and Neo Series LXN4000 with Quantum
SDLT220 tape drives does not work.
Id = HSLco35670 SR: H555008496
OmniBack II displays incorrect message in Graphical
User Interface (GUI) when Medium header check
verification is performed:
"Medium verification completed, 0 errors found"
Id = HSLco35704 SR: H555008504
Bulk eject functionality does not work after
installing patch PHSS_26357/PHSS_26358.
Id = HSLco36329 SR: H555008634
OmniBack II does not unload tape at the end of the
backup.
Id = HSLco36526 SR: B555014660
Sanconf does not distinguish between tape devices
having serial numbers longer than 10 digits.
Id = HSLco36656 SR: H555008680
Cell Manager list and reformat does not work on
UNIX platforms.
Id = HSLco35925 SR: H555008555
Backup to multihost device fails in case that
reconnect option is used.
Id = HSLco36147 SR: H555008610
When during the backup end of tape is reached BMA
ends abnormally.
Id = HSLco36472 SR: H555008655
Backup to file device fails with error:
"[Major] From: BMA<host_name> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
[90:51] /FileDevice
Cannot write to device ([27] File too large)"
Id = HSLco37281 SR: H555008834
Backup to tape device on AIX platform fails with error:
"[Major] From: MMA<host_name> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
[90:173] REQUEST SENSE call failed.
Possible cleanme signal detection failure.
([14] Bad address)"
"[Critical] From: MMA<host_name> "device_name"
Time: <dd.mm.yy hh:mm:ss>
[90:43] /dev/rmt0.1
Invalid physical device type => aborting"
Id = HSLco36985, HSLco36532 SR: H555008753, H555008662
Incremental backup of big Net App filer volumes fails
if there are a lot of exclude parameters specified.
Id = HSLco36901 SR: H555008728
Backup to direct access media fails with error:
"Cannot write to device
([6] No such device or address)"
Id = HSLco36135 SR: H555008608
ACS Media Agent does not retry on errors.
Id = HSLco36960 SR: H555008747
Backup to 9840 device fails with error:
"Invalid physical device type => aborting."
Id = JAGae28035 SR: 8606263710
Backup to tape drive fails if cleaning tape is loaded.
PHSS_26357:
Id = HSLco33017 SR:H555007269
Library robotic mechanism is not released after tape
eject.
Id = HSLco33264 SR:H555007381
After failed backup session due to an I/O drive status
error, important information about the error in
debug.log file is missing.
Id = HSLco33563 SR:H555007513
Medium verification error is reported after
successfully completed backup:
"Medium verification completed, 1 errors found".
Id = HSLco33982 SR:H555007663
ACSLS query fails for STK 9940 media.
Id = HSLco34050 SR:H555007700
Backup fails with an error:
"[Critical] From: BMA<HOST> "<DEVICE>" Time:<TIME>
[90:30] SM/MA protocol error => aborting"
Id = HSLco34139 SR:H555007739
After OmniBack II detects dirty drive and loads a
cleaning tape, option for medium header check aborts
the backup session.
Id = HSLco34266 SR:H555007798
If 'InitOnLoosePolicy' is set to 0 and foreign tape
is loaded OmniBack II aborts backup session instead
of issuing a mount request.
Id = NSMbb44407 SR:B555013119
Sony DTF device does not work correctly.
PHSS_26219:
Id = HSLco30584 SR: H555006666
Omniback does not check if the medium is corrupted
at the end of the backup.
Id = HSLco31274 SR: H555006790
DAS Media Agent cannot handle more than 15 drives.
Id = HSLco31293 SR: H555006798
Querying GRAU libraries hangs.
Id = HSLco31696 SR: H555006885
ACS Media Agent does not recognize LTO drives.
Id = NSMbb44086 SR: B555012905
NDMP Media Agent packages do not contain devbra.
Id = HSLco30326 SR: H555006608
OmniBackII A.04.10 does not support HP VS80 and
Benchmark VS640 libraries.
Id = HSLco32416 SR: H555007051
During backup following messages are reported:
[Normal] From: BSMHostName "Datalist" Time: <time>
[61:1011] Received reconnect request from BMAHostName
"Device".
[Normal] From: BSMHostName "Datalist" Time: <time>
BMAHostName "Device" reconnected successfully.
Defect Description:
PHSS_28745:
Id = HSLco38298
In case that reconnect option is used for backup,
it is possible that Media Agent fails due to a
protocol error.
Resolution:
Protocol between Session Manager and Media Agent is
changed in order not to acknowledge normal formatted
messages.
Id = HSLco39535
Only device files of the format /dev/rmt/*mn are
filtered in devlist_ux.c.
Resolution:
New environment variable OB2BROWSEALLDEVICES is
introduced in ".omnirc" file. Possible values are
0 (default) and 1. If set to 1 the function will
also browse the /dev/rmt/*n device files.
Id = HSLco40131
The tape is unnecessarily checked for physical write
protection during Restore Session.
Resolution:
OmniBack II properly handles physically write protected
tapes.
Id = HSLco40554
SuperDLT is not supported.
Resolution:
SuperDLT is added as supported device in OmniBack II
DAS Media Agent.
Id = HSLco40634
TapeAlert functionality for detecting dirty drives is
disabled by default.
Resolution:
TapeAlert functionality for detecting dirty drives is
enabled by default.
Id = HSLco40877
Meta files are removed although there are still object
versions in the Omniback II Database with reference to
those meta files.
Resolution:
Meta files are no longer removed if there are object
versions in the Omniback II Database with references
to them.
Id = HSLco41099
Backup session on Linux Red Hat fails if IBM 3581 driver
is not installed.
Resolution:
In case that IBM 3581 driver is not installed on the
system, environment variable OB2NOIBM3581=1 must be
added in ".omnirc" file.
Id = HSLco41118
Entry for T9840 and T9940 devices is missing from device
table.
Resolution:
Devices T9840 and T9940 are added to the device table.
Id = HSLco41191
NDMP by default skips tape filemarks, but Celera
implements filemark read in NDMP protocol version 3
and filemarks are not skipped.
Resolution:
By setting variable OB2NDMPFMV4=1 in ".omnirc" file
OmniBack II properly handles filemark skip when
backup is appended.
Id = HSLco41222
Autoconfiguration of Bnchmark VS160, Compaq VS160,
HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
FastStor 2 Autoloader, HP SS1016 Artic Wolf Lib,
HP MSL6000 Series Lib, HP ESL9000 Series Lib,
SEAGATE DAT DAT 06241-xxx and Spectra-Logic Gator
libraries fails because they are not supported by
Data Protector.
Resolution:
New entries are added in "scsitab" file in order to
support Bnchmark VS160, Compaq VS160, HP 2Gen LTO,
Seagate DAT STDL42401LW drives and ADIC FastStor 2
Autoloader, HP SS1016 Artic Wolf Lib, HP MSL6000
Series Lib, HP ESL9000 Series Lib, SEAGATE DAT DAT
06241-xxx and Spectra-Logic Gator libraries.
Id = HSLco41392
omnimm -silo_query command returns invalid number of
media because every 1000th medium is counted twice.
Resolution:
Function returning the list and number of media
is changed.
Id = HSLco41551
If connection between BMA and UMA is broken during
the backup and no IPC error is reported, BMA terminates
session when it fails to instruct UMA to unload the
tape.
Resolution:
New instance of UMA is started.
Id = HSLco41583
All MA agents use logical drive names as user_id when
accessing a STK library. Library only accepts unique
user_id, so Omniback II MA should access it with a
unique user_id.
Resolution:
The user_id MA used to access the library has been
unified.
Id = HSLco41800
Tape statistics logging is not implemented in ACS
and DAS Media Agent.
Resolution:
Functionality is implemented.
Part of SSPUX410_072.
PHSS_28333:
Id = HSLco31403
If append fails during positioning, the tape is not
marked poor.
Resolution:
Error handling is improved.
Id = HSLco37256
Because of drive problems, Media Agent does not
position the tape to the right location.
Resolution:
The way Restore Media Agent finds the right position
on the tape has been changed. If you receive error
message:
"|Major|From RMA<host> "<device>" time:<time>
|90:184| Cannot forward block. |Details unknown.|"
then set new environment variable OB2NOBLOCKSEEK in
.omnirc file to 1 .
Id = HSLco37582
When started during the system startup, "ssi.sh"
script fails because environment variable PATH is
not set.
Resolution:
PATH is set in the "ssi.sh" script and works
correctly during the system startup.
Part of SSPUX410_045.
Id = HSLco38124
Tape I/O operation statistics functionality is not
implemented in OmniBack II.
Resolution:
Tape I/O operation statistics functionality was added.
To enable it, add the new environment variable
"OB2TAPESTATISTICS" to the ".omnirc" file and switch
it on (OB2TAPESTATISTICS=1).
Tape I/O operation statistics is then logged in
"/var/opt/omni/log/tapestatistics.log" file.
The statistics consist of:
1. Errors corrected without substantial delay
2. Errors corrected with possible delays
3. Total rewrites or rereads
4. Total errors corrected
5. Total times correction algorithm processed
6. Total bytes processed
7. Total uncorrected errors
Part of SSPUX410_049.
Id = HSLco38160
OmniBack II does not include 'show tape copy progress'
functionality.
Resolution:
This functionality is added. To enable it, add the
new environment variable "OB2COPYTAPEMSG=k"
in ".omnirc" file. OmniBack II then for every k-th
segment shows a message:
"|Normal| From: CMA-ACS<hostname> "<device>"
Time: <time>
Copying segment k"
Id = HSLco38372
The device autoconfiguration fails, because the drive
is not recognized.
Resolution:
Autoconfiguration "Product ID" string in scsitab file
is changed from "Mammoth2" to "MAMMOTH2".
Id = HSLco38412
OmniBack II does not properly handle mounted tapes.
Resolution:
Tapes in home position and mounted tapes are handled
the same way. They are both considered 'resident'.
Id = HSLco38420
In case that Media Agent host uses the old NIO SCSI
bus, OmniBack II is not able to get the capacity of
a mounted Magneto Optical (MO) medium.
Resolution:
Media Agent is improved to correctly get the
capacity of the MO medium.
Id = HSLco38492
Read/write of Cartridge Memory on LTO devices does not
work properly.
Resolution:
Media Agent is improved to work correctly with
Cartridge Memory on LTO devices.
Id = HSLco39232
In AIX SAN environment it is possible that a device
is not available for a couple of seconds due to other
activities in SAN environment. In such cases the
"write()" command fails with EBUSY error.
Resolution:
Retry is added in case of EBUSY error. Retry can be
configured with environment variables
OB2SPTRETRY (default 10 retries) and
OB2SPTSLEEP (default 10 seconds) in ".omnirc" file.
Part of SSPUX410_057.
Id = HSLco39489
OmniBack II is performing cleaning of DLT drives in
case that cleaning light is on. But in some cases
this light is still on even after drive is cleaned
and OmniBack II repeats cleaning cycle.
Resolution:
New environment variable, "OB2DLTCLEANINGLIGHTCHECK"
is added in ".omnirc" file. By default it is set to
"0" and cleaning is not performed when cleaning light
is on. If variable is set to "1", cleaning is performed.
Id = HSLco40523
OmniBack II is not designed to mark tape as occupied
when tape mounting fails with "STATUS_VOLUME_IN_DRIVE".
Resolution:
OmniBack II properly marks tape as "Poor" in case
when mount operation fails with ACS error:
"STATUS_VOLUME_IN_DRIVE".
Part of SSPUX410_058.
PHSS_27458:
Id = HSLco30962, HSLco35407
When the devices automatically unloads, OmniBack II
tries to unload but fails since the device already
unloaded tape.
Resolution:
New environment variable OB2NOEJECTCLEANINGTAPE which
has to be set to 1 in omnirc file, was implemented in
order to prevent OmniBack II to unload the cleaning
tape.
Id = HSLco34581
Enabled "st_san_safe" parameter causes incorrect
system handling for the devices with "rewind on close"
implemented. This causes devbra to return unusable
devices.
Resolution:
devbra is adapted in order to work properly when
"st_san_safe" kernel parameter is enabled.
Id = HSLco34684
Media Agent on AIX platform does not handle End
of Medium correctly for LTO devices.
Resolution:
End of Medium handling is improved for LTO devices
on AIX platform.
Id = HSLco34910
New inquiry strings are needed for Compaq devices.
Resolution:
New inquiry strings are added for Compaq devices.
Id = HSLco35035
In case that NDMP backup contains large number of
files, Backup Media Agent uses large amount of memory.
Resolution:
Backup Media Agent memory usage is improved so it can
backup up to 5 million files.
Id = HSLco35178
Sometimes it is possible that eject operation fails
after the medium header verification.
Resolution:
Additional medium rewind operation is added before the
offline operation.
Id = HSLco35450
Auto configuration of Overland Data Neo Series
LXN2000 and Neo Series LXN4000with Quantum
SDLT220 tape drives does not work because of
inquiry strings missing.
Resolution:
Inquiry strings are added for auto configuration.
Id = HSLco35670
Message is implying that medium verification has been
done although only the medium header sanity check has
been performed.
Resolution:
Message is changed to:
"Medium header verification completed".
Part of SSPUX410_028.
Id = HSLco35704
When performing bulk eject media agent aborts session.
Resolution:
Ejecting tape from mailslot works properly.
Id = HSLco36329
If during the backup connection between BMA and UMA
is broken and no IPC error is reported, BMA terminates
when it fails to instruct UMA to unload the tape.
Resolution:
New instance of UMA is started.
Id = HSLco36526
Devbra and sanconf are limited to 10 character serial
numbers only. When there are devices with 12 digit
SN detected, devbra truncates the last two digits.
As a result, several physical devices are then treated
as one and the same device.
Resolution:
Devbra is using all digits of the device SN to
distinguish between devices.
Part of SSPUX410_040.
Id = HSLco36656
Reading and accessing the Cell Manager info resulted
in xma ending abnormally.
Resolution:
Source code for updating Cell Manager info has been
modified slightly.
Id = HSLco35925
Media Agent protocol is incorrect for the devices
with multi-host connection.
Resolution:
Media Agent protocol is improved for the devices using
multi-host connections.
Part of SSPUX41_031.
Id = HSLco36147
Solaris Media Agent is not capable of handling SCSI
sense information bigger than 144 bytes.
Problem typically occurs in combination with certain
types of SAN FC switches/drivers.
Resolution:
Buffer receiving SCSI sense information is increased.
Part of SSPUX410_035.
Id = HSLco36472
Media Agent is not able to write beyond 2GB limitation
on file devices.
Resolution:
The 2Gb limitation on file devices is increased.
Part of SSPUX410_037.
Id = HSLco37281
OmniBack II does not support FC devices on
AIX platform.
Resolution:
Support for FC devices on AIX platform is added.
Part of SSPUX410_038.
Id = HSLco36985, HSLco36532
Ascii to Unicode conversions of large number of
filenames generate stack overflow while transferring
the catalog information.
Resolution:
Function for Ascii to Unicode conversion is replaced.
Part of SSPUX410_042.
Id = HSLco36901
In case that backup to direct access devices contains
large number of small files, it is possible that
catalog size is bigger than space available on medium.
Because of this backup fails to write complete catalog
to the medium.
Resolution:
Calculation of space needed for catalog is improved in
order not to exceed available space.
Id = HSLco36135
New values are returned by SN6000.
Resolution:
New returned values for SN6000 are supported.
Id = HSLco36960
OmniBack II does not work correctly with 9840 device
which product ID starts with "T9840".
Resolution:
Media Agent is improved in order to support 9840
devices which product ID starts with "T9840".
Id = JAGae28035
Automatic cleaning does not work if library does not
have barcode support.
Resolution:
New OmniBack II environment variable is added:
OB2CLNSLOT. Variable has to be set on Media Agent host
and has to contain number of Cleaning slot configured
for the library.
PHSS_26357:
Id = HSLco33017
When split library in SAN environment is assigned to
2 systems and "omnimm -eject" is run on host B, host A
can no longer access the changer.
Resolution:
Library robotic mechanism is released after tape
eject.
Id = HSLco33264
Not all information is written to the debug.log after
I/O drive status error occurs.
Resolution:
Information is added to the debug.log file.
Id = HSLco33563
With OmniBack II A.04.00 release verification of DA
block part is introduced. In case that data length for
the data record is "0", verify reports an error.
Resolution:
Verify is changed in order to ignore "0" data length
for data record, because this does not influence data
restore.
Part of SSPUX410_016.
Id = HSLco33982
In case that STK 9940 drives are configured as T9840,
query does not work correctly because OB2 expects that
those drives are configured as type 3590.
Resolution:
Configuration for STK 9940 is changed in order to be
recognized as T9840 media type.
Id = HSLco34050
In case in which reconnect option is used for backup,
it is possible that Media Agent fails due to a protocol
error.
Resolution:
Protocol between Session Manager and Media Agent is
changed in order not to acknowledge normal formatted
messages.
Complete functionality of this fix will be available
when Cell Server patch PHSS_26353/PHSS_26354 is
installed - or successors of it.
Part of SSPUX410_017.
Id = HSLco34139
Header verification can not handle a dirty drive
situation.
Resolution:
If OmniBack II detects cleaning tape medium header is
not checked before unloading.
Id = HSLco34266
When loading a tape medium header check is run. If the
medium is foreign or blank OmniBack II aborts backup
session.
Resolution:
If loaded tape is foreign or blank OmniBack II does not
check medium header when closing device.
Id = NSMbb44407
In order for Sony DTF device to work correctly,
"OB2DBD=1" entry has to be added to omnirc file.
Resolution:
Entry for Sony DTF drive is updated in order to make
the device work correctly without omnirc entry.
PHSS_26219:
Id = HSLco30584 SR: H555006666
Medium header verification is not implemeted.
Resolution:
Environment variable OB2DISABLEHEADERCHECK is
introduced.
Medium header is checked by default. Setting the
variable to 1 in /opt/omni/.omnirc file turns the
functionality off.
Id = HSLco31274
DAS Media Agent is checking incorrect environment
variable.
Resolution:
Setting environment variable OB2DASDRIVESTATUS2 to 1
in the /opt/omni/omnirc file makes usage of more than
15 drives possible.
Id = HSLco31293
Query operation hangs when performed on GRAU
libraries with more than 1000 tapes.
Resolution:
Query operation can handle more than 1000 tapes
within GRAU library.
Id = HSLco31696
LTO drives are not supported with Omniback ACS
integration.
Resolution:
Omniback ACS integration supports LTO drives.
Id = NSMbb44086
NDMP Media Agent packages do not contain devbra.
Resolution:
devbra is added to NDMP Media Agent packages.
Id = HSLco30326
OmniBackII A.04.10 does not support HP VS80 and
Benchmark VS640 libraries.
Resolution:
OmniBackII A.04.10 supports HP VS80 and Benchmark VS640
libraries on HP-UX, Linux and Sun Solaris systems.
Part of SSPUX410_002.
Id = HSLco32416
In case that reconnect option is used and OB2PORTRANGE
environment variable is set, it is possible that
reconnect occurs at the beginning of the session
due to incorrectly set timeout.
Resolution:
Timeout is set to correct value.
SR:
H555010332 H555009873 H555010317 H555010157 H555010392
H555009430 H555010277 H555009054 H555009630 H555010199
H555010030 H555009914 H555010150 H555010214 H555009101
H555009859 H555009315 H555009018 H555009027 H555009407
H555009139 H555006826 H555008870 H555009095 H555008826
H555009078 H555008728 H555008179 H555008747 H555008496
H555007993 8606263710 B555014660 H555008050 H555008421
H555008610 H555008242 H555008504 H555006734 H555008328
H555008634 H555008608 H555008428 H555008662 H555008680
H555008834 H555008753 H555008555 H555008655 B555013119
H555007739 H555007700 H555007798 H555007513 H555007381
H555007663 H555007269 B555012905 H555006885 H555006608
H555007051 H555006798 H555006790 H555006666
Patch Files:
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
packet.Z
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
A.04.10/packet.Z
what(1) Output:
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
A.04.10/packet.Z:
None
cksum(1) Output:
3188565085 2450921 /opt/omni/databases/vendor/ma/hp/s800/
hp-ux-1020/A.04.10/packet.Z
2736772 2451013 /opt/omni/databases/vendor/ma/hp/s800/
hp-ux-11/A.04.10/packet.Z
716968445 2068373 /opt/omni/databases/vendor/ma/gpl/i386/
linux-60/A.04.10/packet.Z
9845770 2148655 /opt/omni/databases/vendor/ma/ibm/rs6000/
aix-42/A.04.10/packet.Z
2636096177 1871958 /opt/omni/databases/vendor/ma/sco/i386/
sco_sv/A.04.10/packet.Z
3178890692 2101773 /opt/omni/databases/vendor/ma/sequent/
i386/dynix/A.04.10/packet.Z
577989273 2405525 /opt/omni/databases/vendor/ma/siemens/
r400/sinix/A.04.10/packet.Z
652591458 2406957 /opt/omni/databases/vendor/ma/sun/sparc/
solaris-26/A.04.10/packet.Z
2442494832 3014629 /opt/omni/databases/vendor/acs/hp/s800/
hp-ux-11/A.04.10/packet.Z
1534168841 3018955 /opt/omni/databases/vendor/acs/hp/s800/
hp-ux-1020/A.04.10/packet.Z
3169319178 3015109 /opt/omni/databases/vendor/acs/sun/sparc/
solaris-26/A.04.10/packet.Z
575881072 2701407 /opt/omni/databases/vendor/acs/ibm/rs6000/
aix-42/A.04.10/packet.Z
209902435 2572723 /opt/omni/databases/vendor/das/hp/s800/
hp-ux-11/A.04.10/packet.Z
3157661095 2585857 /opt/omni/databases/vendor/das/hp/s800/
hp-ux-1020/A.04.10/packet.Z
3424239432 2540625 /opt/omni/databases/vendor/das/ibm/
rs6000/aix-42/A.04.10/packet.Z
3393058265 2898142 /opt/omni/databases/vendor/ndmp/hp/s800/
hp-ux-1020/A.04.10/packet.Z
312596470 2895677 /opt/omni/databases/vendor/ndmp/hp/s800/
hp-ux-11/A.04.10/packet.Z
2432899589 2779265 /opt/omni/databases/vendor/ndmp/sun/
sparc/solaris-7/A.04.10/packet.Z
1713245030 2888385 /opt/omni/databases/vendor/fxma/hp/s800/
hp-ux-1020/A.04.10/packet.Z
138982856 2895092 /opt/omni/databases/vendor/fxma/hp/s800/
hp-ux-11/A.04.10/packet.Z
3251273579 2756762 /opt/omni/databases/vendor/fxma/sun/
sparc/solaris-26/A.04.10/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If any newer SSP for the Media Agent is installed
on your system, you must re-apply the SSP after
installing this Media Agent patch.
If the Cell Server is running on HP-UX, then the
Cell Server patch PHSS_27454/PHSS_27455 (or later)
for HP-UX must be installed before this Media Agent
patch. If this is not done, the connection between
Media Agents and Cell Server will no longer work.
In a mixed environment, if the Cell Server is running
on Windows NT/2000, then Cell Server patch
OMNIBACK_00061 (or later) must be installed at the
same time.
PHSS_28740:
Cell Server (CS) packet patch,
Release Date: End of July
Id = HSLco38298 SR: H555009054
Id = HSLco40877 SR: H555010030
PHSS_28740 is required for these defect fixes.
PHSS_28738:
Cell Console (CC) packet patch,
Release Date: Available
Id = HSLco36526 SR: B555014660
Id = HSLco39535 SR: H555009430
PHSS_28738 is required for these defect fixes.
PHSS_28731:
Cell Server (CS) packet patch,
Release Date: Available
Id = HSLco36656 SR:H555008680
Id = HSLco35035 SR:H555008242
Id = HSLco34050 SR:H555007700
PHSS_28731 is required for these defect fixes.
Supersedes:
PHSS_26219 PHSS_26357 PHSS_27458 PHSS_28333
Equivalent Patches:
PHSS_28746:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Patch Package Size: 50170 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28745
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHSS_28745.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHSS_28745. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHSS_28745.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28745.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_28745:
NOTE!
This Patch has to be installed on the Installation
Server host.
The OB2 Media Agent must be redistributed to the Media
Agent client system(s) after the installation of the patch
in order to get the fixes into effect.
For distribution of the Media Agent, refer to the
OmniBackII Installation guide.
Patch includes the following Site Specific Patches:
SSPUX410_002
SSPUX410_016
SSPUX410_017
SSPUX410_028
SSPUX410_031
SSPUX410_035
SSPUX410_037
SSPUX410_038
SSPUX410_040
SSPUX410_042
SSPUX410_045
SSPUX410_049
SSPUX410_057
SSPUX410_058
SSPUX410_072
-----End of Document ID: PHSS_28745------------------------------------------
Document ID: PHCO_29280
Date Loaded: 20030627
Title: s700_800 10.26 cumulative manpages patch
Patch Name: PHCO_29280
Patch Description: s700_800 10.26 cumulative manpages patch
Creation Date: 03/06/18
Post Date: 03/06/27
Hardware Platforms - OS Releases:
s700: 10.26
s800: 10.26
Products: N/A
Filesets:
SW-DIST.SD-ENG-A-MAN BLS.BLS-ENG-A-MAN
JournalFS.JFS-ENG-A-MAN OS-Core.ADMN-ENG-A-MAN
OS-Core.CMIN-ENG-A-MAN OS-Core.CORE-ENG-A-MAN
ProgSupport.PAUX-ENG-A-MAN
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHCO_29280
Symptoms:
PHCO_29280:
1. getprpwent(3) man page is not upto date.
PHCO_20022:
Update SD-UX commands manpages for the new function
"swwrapper", which acts as a security-aware front-end
to the SD-UX command set.
The wrapper specifies that the invoking user must
possess the sdcmds authorization for all commands except
the "swacl" command, which must be invoked by a user with
the isso authorization.
PHCO_18636:
No manpages for the new functions fgetprpwnam and
fputprpwnam
PHCO_17241:
Security addendum for mklost+found in fsck_hfs(1M) and
fsck_vxfs(1M)
Incorrect footer for devassign(4)
authck(1M) missing -N synopsis
Circular link for swmv(1) and swcp(1), manpage missing.
Remove links for fstat(2) and lstat(2). New pages for
fstat(2), lstat(2) and stat(2)
creat64(2) shows lock64 instead of lockf64 in synopsis.
lseek64 incorrectly shows first parameter to be a pointer.
Incorrect footer for authcap(4)
ftruncate64(2) link to creat64(2) missing
Update getprpwent(3)
Update getprdfent(3)
Update getdvagent(3)
Update getprtcent(3)
Update ttys(4)
Update chacl(1)
Update privileges(3)
Update privileges(5)
Update authorize(4)
Defect Description:
PHCO_29280:
1. getprpwent(3) man page is not upto date.
Resolution:
getprpwent(3) man page has been updated.
PHCO_20022:
Update SD-UX commands manpages.
PHCO_18636:
New functions fgetprpwnam and fputprpwnam were created.
Manpages are needed for them.
Resolution:
Added description of the new functions fgetprpwnam and
fputprpwnam to the getprpwent man page. Links were created
for fgetprpwnam and fputprpwnam to the getprpwent man page
PHCO_17241:
Misc changes and additions
Resolution:
Misc changes and additions
SR:
0000000000
Patch Files:
/usr/share/man/man1m.Z/swconfig.1m
/usr/share/man/man1m.Z/swagentd.1m
/usr/share/man/man1m.Z/swacl.1m
/usr/share/man/man1m.Z/swinstall.1m
/usr/share/man/man1m.Z/swjob.1m
/usr/share/man/man1m.Z/swlist.1m
/usr/share/man/man1m.Z/swmodify.1m
/usr/share/man/man1m.Z/swpackage.1m
/usr/share/man/man1m.Z/swreg.1m
/usr/share/man/man1m.Z/swremove.1m
/usr/share/man/man1m.Z/swverify.1m
/usr/share/man/man5.Z/swwrapper.5
/usr/share/man/man4.Z/authorize.4
/usr/share/man/man3.Z/fgetprpwnam.3
/usr/share/man/man3.Z/fputprpwnam.3
/usr/share/man/man3.Z/getprpwent.3
/usr/share/man/man3.Z/getpwent.3c
/usr/share/man/man1.Z/chacl.1
/usr/share/man/man1.Z/swcp.1
/usr/share/man/man1.Z/swmv.1
/usr/share/man/man1m.Z/authck.1m
/usr/share/man/man1m.Z/fsck_hfs.1m
/usr/share/man/man1m.Z/fsck_vxfs.1m
/usr/share/man/man2.Z/creat64.2
/usr/share/man/man2.Z/ftruncate64.2
/usr/share/man/man2.Z/fstat.2
/usr/share/man/man2.Z/lstat.2
/usr/share/man/man2.Z/stat.2
/usr/share/man/man3.Z/getdvagent.3
/usr/share/man/man3.Z/copydvagent.3
/usr/share/man/man3.Z/enddvagent.3
/usr/share/man/man3.Z/getdvagnam.3
/usr/share/man/man3.Z/putdvagnam.3
/usr/share/man/man3.Z/setdvagent.3
/usr/share/man/man3.Z/getprdfent.3
/usr/share/man/man3.Z/endprdfent.3
/usr/share/man/man3.Z/getprdfnam.3
/usr/share/man/man3.Z/putprdfnam.3
/usr/share/man/man3.Z/setprdfent.3
/usr/share/man/man3.Z/endprpwent.3
/usr/share/man/man3.Z/getprpwnam.3
/usr/share/man/man3.Z/getprpwuid.3
/usr/share/man/man3.Z/putprpwnam.3
/usr/share/man/man3.Z/setprpwent.3
/usr/share/man/man3.Z/getprtcent.3
/usr/share/man/man3.Z/endprtcent.3
/usr/share/man/man3.Z/getprtcnam.3
/usr/share/man/man3.Z/putprtcnam.3
/usr/share/man/man3.Z/setprtcent.3
/usr/share/man/man3.Z/privileges.3
/usr/share/man/man4.Z/authcap.4
/usr/share/man/man4.Z/devassign.4
/usr/share/man/man4.Z/ttys.4
/usr/share/man/man5.Z/privileges.5
what(1) Output:
/usr/share/man/man1m.Z/swconfig.1m:
None
/usr/share/man/man1m.Z/swagentd.1m:
None
/usr/share/man/man1m.Z/swacl.1m:
None
/usr/share/man/man1m.Z/swinstall.1m:
None
/usr/share/man/man1m.Z/swjob.1m:
None
/usr/share/man/man1m.Z/swlist.1m:
None
/usr/share/man/man1m.Z/swmodify.1m:
None
/usr/share/man/man1m.Z/swpackage.1m:
None
/usr/share/man/man1m.Z/swreg.1m:
None
/usr/share/man/man1m.Z/swremove.1m:
None
/usr/share/man/man1m.Z/swverify.1m:
None
/usr/share/man/man5.Z/swwrapper.5:
None
/usr/share/man/man4.Z/authorize.4:
None
/usr/share/man/man3.Z/fgetprpwnam.3:
None
/usr/share/man/man3.Z/fputprpwnam.3:
None
/usr/share/man/man3.Z/getprpwent.3:
None
/usr/share/man/man3.Z/getpwent.3c:
None
/usr/share/man/man1.Z/chacl.1:
None
/usr/share/man/man1.Z/swcp.1:
None
/usr/share/man/man1.Z/swmv.1:
None
/usr/share/man/man1m.Z/authck.1m:
None
/usr/share/man/man1m.Z/fsck_hfs.1m:
None
/usr/share/man/man1m.Z/fsck_vxfs.1m:
None
/usr/share/man/man2.Z/creat64.2:
None
/usr/share/man/man2.Z/ftruncate64.2:
None
/usr/share/man/man2.Z/fstat.2:
None
/usr/share/man/man2.Z/lstat.2:
None
/usr/share/man/man2.Z/stat.2:
None
/usr/share/man/man3.Z/getdvagent.3:
None
/usr/share/man/man3.Z/copydvagent.3:
None
/usr/share/man/man3.Z/enddvagent.3:
None
/usr/share/man/man3.Z/getdvagnam.3:
None
/usr/share/man/man3.Z/putdvagnam.3:
None
/usr/share/man/man3.Z/setdvagent.3:
None
/usr/share/man/man3.Z/getprdfent.3:
None
/usr/share/man/man3.Z/endprdfent.3:
None
/usr/share/man/man3.Z/getprdfnam.3:
None
/usr/share/man/man3.Z/putprdfnam.3:
None
/usr/share/man/man3.Z/setprdfent.3:
None
/usr/share/man/man3.Z/endprpwent.3:
None
/usr/share/man/man3.Z/getprpwnam.3:
None
/usr/share/man/man3.Z/getprpwuid.3:
None
/usr/share/man/man3.Z/putprpwnam.3:
None
/usr/share/man/man3.Z/setprpwent.3:
None
/usr/share/man/man3.Z/getprtcent.3:
None
/usr/share/man/man3.Z/endprtcent.3:
None
/usr/share/man/man3.Z/getprtcnam.3:
None
/usr/share/man/man3.Z/putprtcnam.3:
None
/usr/share/man/man3.Z/setprtcent.3:
None
/usr/share/man/man3.Z/privileges.3:
None
/usr/share/man/man4.Z/authcap.4:
None
/usr/share/man/man4.Z/devassign.4:
None
/usr/share/man/man4.Z/ttys.4:
None
/usr/share/man/man5.Z/privileges.5:
None
cksum(1) Output:
2229312582 12379 /usr/share/man/man1m.Z/swconfig.1m
3105498393 11946 /usr/share/man/man1m.Z/swagentd.1m
2657286065 12395 /usr/share/man/man1m.Z/swacl.1m
1011679969 27311 /usr/share/man/man1m.Z/swinstall.1m
2481551003 8850 /usr/share/man/man1m.Z/swjob.1m
313471197 12535 /usr/share/man/man1m.Z/swlist.1m
3763581978 12612 /usr/share/man/man1m.Z/swmodify.1m
909963037 12822 /usr/share/man/man1m.Z/swpackage.1m
3067339459 8224 /usr/share/man/man1m.Z/swreg.1m
4233932695 17417 /usr/share/man/man1m.Z/swremove.1m
1474664054 12220 /usr/share/man/man1m.Z/swverify.1m
859153551 2025 /usr/share/man/man5.Z/swwrapper.5
3066997763 4148 /usr/share/man/man4.Z/authorize.4
1935848999 8965 /usr/share/man/man3.Z/fgetprpwnam.3
1935848999 8965 /usr/share/man/man3.Z/fputprpwnam.3
1935848999 8965 /usr/share/man/man3.Z/getprpwent.3
3560978272 5276 /usr/share/man/man3.Z/getpwent.3c
2511181116 4081 /usr/share/man/man1.Z/chacl.1
3676522966 2792 /usr/share/man/man1.Z/swcp.1
3676522966 2792 /usr/share/man/man1.Z/swmv.1
2934621433 3910 /usr/share/man/man1m.Z/authck.1m
2393183230 6941 /usr/share/man/man1m.Z/fsck_hfs.1m
3257795019 5637 /usr/share/man/man1m.Z/fsck_vxfs.1m
1848562673 3329 /usr/share/man/man2.Z/creat64.2
1848562673 3329 /usr/share/man/man2.Z/ftruncate64.2
594139021 2873 /usr/share/man/man2.Z/fstat.2
568471612 2423 /usr/share/man/man2.Z/lstat.2
2214343494 3824 /usr/share/man/man2.Z/stat.2
644408082 5468 /usr/share/man/man3.Z/getdvagent.3
644408082 5468 /usr/share/man/man3.Z/copydvagent.3
644408082 5468 /usr/share/man/man3.Z/enddvagent.3
644408082 5468 /usr/share/man/man3.Z/getdvagnam.3
644408082 5468 /usr/share/man/man3.Z/putdvagnam.3
644408082 5468 /usr/share/man/man3.Z/setdvagent.3
281204350 4454 /usr/share/man/man3.Z/getprdfent.3
281204350 4454 /usr/share/man/man3.Z/endprdfent.3
281204350 4454 /usr/share/man/man3.Z/getprdfnam.3
281204350 4454 /usr/share/man/man3.Z/putprdfnam.3
281204350 4454 /usr/share/man/man3.Z/setprdfent.3
1935848999 8965 /usr/share/man/man3.Z/endprpwent.3
1935848999 8965 /usr/share/man/man3.Z/getprpwnam.3
1935848999 8965 /usr/share/man/man3.Z/getprpwuid.3
1935848999 8965 /usr/share/man/man3.Z/putprpwnam.3
1935848999 8965 /usr/share/man/man3.Z/setprpwent.3
801463405 4460 /usr/share/man/man3.Z/getprtcent.3
801463405 4460 /usr/share/man/man3.Z/endprtcent.3
801463405 4460 /usr/share/man/man3.Z/getprtcnam.3
801463405 4460 /usr/share/man/man3.Z/putprtcnam.3
801463405 4460 /usr/share/man/man3.Z/setprtcent.3
133443292 7854 /usr/share/man/man3.Z/privileges.3
3268585294 2869 /usr/share/man/man4.Z/authcap.4
2671366452 3041 /usr/share/man/man4.Z/devassign.4
1308349236 2319 /usr/share/man/man4.Z/ttys.4
1206681990 8431 /usr/share/man/man5.Z/privileges.5
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHCO_20022 PHCO_17241 PHCO_18636
Equivalent Patches: None
Patch Package Size: 350 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_29280
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHCO_29280.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHCO_29280. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHCO_29280.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_29280.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
The error message in the swagent.log regarding swcp and swmv
manpages can be ignored if you swremove this patch
from the system. This is due to the original
problem with the circular link for swmv(1) and swcp(1) in
the base system.
-----End of Document ID: PHCO_29280------------------------------------------
Document ID: PHCO_29216
Date Loaded: 20030627
Title: s700_800 10.26 libsecurity cumulative patch
Patch Name: PHCO_29216
Patch Description: s700_800 10.26 libsecurity cumulative patch
Creation Date: 03/06/25
Post Date: 03/06/27
Hardware Platforms - OS Releases:
s700: 10.26
s800: 10.26
Products: N/A
Filesets:
BLS.BLS-CORE BLS.BLS-ENG-A-MAN BLS.MAXSIX
ProgSupport.PROG-MIN
Automatic Reboot?: Yes
Status: General Release
Critical:
No (superseded patches were critical)
PHCO_28757: MEMORY_LEAK
PHCO_18179: MEMORY_LEAK
Path Name: /hp-ux_patches/s700_800/10.X/PHCO_29216
Symptoms:
PHCO_29216:
1. getprpwent() routine doesn't return NIS users if
"hipfiltered" privilege is not present in the
potential set, even if hip is not configured
in the system.
PHCO_28919:
1. Possible core dump by check_cmdauth.
PHCO_28757:
1. Applications using mapping routines like
pw_idtoname(), pw_nametoid(), gr_idtoname() or
gr_nametoid() leaks memory.
PHCO_27822:
Yppullc consumes 90% of the CPU time forever.
PHCO_23735:
Trusted login hangs for upto 15 minutes on a busy system
PHCO_20467:
The system hangs as a result of crashed mandatory
access policy daemon (macilbd).
PHCO_20430:
On starting the NIS client processes on the NIS master
machine, ypullc starts hogging the CPU time.
PHCO_19042:
Smartcard does not password authenticate correctly
PHCO_18502:
Functions to access protected password database that take
directory as argument do not exist.
Getprpwent function stops returning nis entries after
it returns the first one.
PHCO_18179:
Memory leak in security policy daemons
PHCO_17856:
We need to create strsecerror function in libsecurity.
It should work the same way as psecerror except that it
returns the message string instead of sending it to the
standard error.
PHCO_17760:
There is no way to get the classification string from
an IR in all Encodings cases. Additionally, the SHORT_WORDS
specifier has no effect on the returned classification. It
always returns the long form.
Defect Description:
PHCO_29216:
1. getprpwent() routine doesn't return NIS users if
"hipfiltered" privilege is not present in the
potential set, even if hip is not configured
in the system.
Resolution:
Code has been modified to take care of this issue.
PHCO_28919:
1. check_cmdauth dumps core if the authorization
is more than 80 characters.
Resolution:
1. Code has been modified to prevent core dump by
check_cmdauth.
PHCO_28757:
1. Applications using mapping routines like
pw_idtoname(), pw_nametoid(), gr_idtoname() or
gr_nametoid() leaks memory.
Resolution:
1. Code has been modified to reuse the previously
allocated memory.
PHCO_27822:
When a NIS map is changed in the server side,yppullc
sometimes goes in to an infinite loop.This is because
of a list that was not managed properly in the
libsecurity library.
Resolution:
Code has been modified to handle the map transferring
logic properly.
PHCO_23735:
There can be excessive delays if the system has heavy I/O
through the buffer cache.
Resolution:
Replaced the sync() system call with fsync() library
function
PHCO_20467:
Each security policy daemon maintains a cache of its
security policy database pages to reduce the I/O. The
cache is being implemented as a list of fixed number of
buffers. It uses the Least Recently Used (LRU) policy to
pick a buffer for reuse. In certain conditions, the daemon
fails to pick any buffer even if buffers are available.
It results in a crash of security policy daemons
PHCO_20430:
On starting the yppullc, it starts monitoring the password
and group maps on the NIS master machine for the updates.
On detecting a change, it triggers the regeneartion of
pw_id_map and gr_id_map on all the clients. These maps are
generated in the context of yppullc or any other processes
whoever tries to map the user name or group name to its id
first. Most of the time, it happens in the context of
yppullc. Because of a defect in the map generation logic,
it loops forever.
PHCO_19042:
The password changing commands need to know
CRString for a new password to perform the password history
checks. Currently, these commands are invoking
smartcard_PWchange() twice in succession to achieve this
functionality. The first invokation sets the new password
and the second invokation restores the old password. This is
just a workaround which is causing problem in developing the
Smartcard hook library.
Resolution: Added a new hook in the libSmartCard library to
get the CRstring for a new passwword without writing into
the Smart Card. All the commands which change the user
passwords have been modified to invoke the hook.
PHCO_18502:
Functions fgetprpwnam and fputprpwnam need to be created.
They will read/write protected password entry from the
desired directory. NIS does not need to be up.
Getprpwent function is calling other functions which will
reset the pointer when NIS users are accessed.
Resolution:
Two new functions are created:
struct pr_passwd *fgetprpwnam(char *nam, char *authdir)
int
fputprpwnam(char *nam, struct pr_passwd *p, char *authdir)
They can be used to access any desired protected password
directory and read and write entries from there.
Getprpwent function was redesigned so that it does not
call the function that reset the entry pointer so that all
the entries are now correctly returned.
PHCO_18179:
The daemon fails to release the lock on the memory
page in some error cases. This results a process
space memory leak. This size of the daemon grows
over a long period of time and eventually the daemon
dies and the system becomes unusable.
Resolution:
Release page lock under error conditions.
PHCO_17856:
New requirement.
Resolution:
Create the function and the man page.
PHCO_17760:
New requirement.
Resolution:
Provide a new interface to retrieve classification from a
valid IR.
SR:
0000000000
Patch Files:
/usr/lib/libsec.a(smartcard.o)
/usr/lib/libsec.a(map_ids.o)
/usr/lib/libsec.a(discr.o)
/usr/lib/libsecurity.1
/tcb/bin/acld
/tcb/bin/dbck
/tcb/bin/m6d
/tcb/bin/m6dbck
/tcb/bin/m6mkdb
/tcb/bin/macilbd
/tcb/bin/mkdb
/usr/include/mandatory.h
/usr/lib/libsec.a(mandlib.o)
/usr/lib/libsec.a(psecerror.o)
/usr/lib/libsec.a(getprpwent.o)
/usr/lib/libsec.a(authcap.o)
/usr/share/man/man3.Z/mand.3
/usr/share/man/man3.Z/mand_ir_to_class_er.3
/usr/share/man/man3.Z/psecerror.3
/usr/share/man/man3.Z/strsecerror.3
/usr/lib/libsec.a(subsystems.o)
what(1) Output:
/usr/lib/libsec.a(smartcard.o):
99/06/25 lib/libsecurity/smartcard.c, hpux, hpux_10.
26, ic5cv Revision 1.4 PATCH_10.26 (PHCO_190
42)
/usr/lib/libsec.a(map_ids.o):
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
/usr/lib/libsec.a(discr.o):
01/03/26 lib/libsecurity/discr.c, hpux, hpux_10.26,
ic5fq Revision 1.3 PATCH_10.26 (PHCO_23735)
/usr/lib/libsecurity.1:
2003/06/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5ib -
DAV17 ]
99/05/21 lib/libsecurity/authcap.c, hpux, hpux_10.26
, ic5ib Revision 1.5 PATCH_10.26 (PHCO_18502
)
01/03/26 lib/libsecurity/discr.c, hpux, hpux_10.26,
ic5ib Revision 1.3 PATCH_10.26 (PHCO_23735)
03/06/24 lib/libsecurity/getprpwent.c, hpux, hpux_10
.26, ic5ib Revision 1.28 PATCH_10.26 (PHCO_2
9216)
03/06/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5ib Revision 1.5 PATCH_10.26 (PHCO_17760
) $
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5ib Revision 1.16 PATCH_10.26 (PHCO_2875
7)
99/03/09 lib/libsecurity/psecerror.c, hpux, hpux_10.
26, ic5ib Revision 1.4 PATCH_10.26 (PHCO_178
56)
03/04/23 lib/libsecurity/subsystems.c, hpux, hpux_10
.26, ic5ib Revision 1.6 PATCH_10.26 (PHCO_28
919)
99/05/21 lib/libsecurity/chsecattr.c, hpux, hpux_10.
26, ic5ib Revision 1.3 PATCH_10.26 (PHCO_185
02)
99/06/25 lib/libsecurity/smartcard.c, hpux, hpux_10.
26, ic5ib Revision 1.4 PATCH_10.26 (PHCO_190
42)
/tcb/bin/acld:
HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
00/01/05 lib/libc/net/net/innetgr.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_all.c, hpux, hpux_10.26,
ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782)
01/02/01 lib/libc/core/stdio/doprnt.c, hpux, hpux_10
.26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_23
181) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_bind.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782
)
00/01/05 lib/libc/net/yp/yp_match.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2)
00/01/05 lib/libc/net/rpc/xdr_mem.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
2003/02/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5hk -
DAV17 ]
99/11/15 seccmd/secpolicy/spdbm.c, hpux, hpux_10.26,
ic5hk Revision 1.7 PATCH_10.26 (PHCO_20467)
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
03/02/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_17760
) $
ic5ae_DAV17 lib/libc/archive_pa1/libc.a_01
Feb 24 2003 12:03:18
/tcb/bin/dbck:
HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
03/02/24 lib/libc/core/gen/ctime.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_17823
) UNMODIFIED
00/01/05 lib/libc/net/net/innetgr.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_all.c, hpux, hpux_10.26,
ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782)
00/01/05 lib/libc/net/yp/yp_bind.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782
)
01/02/01 lib/libc/core/stdio/doprnt.c, hpux, hpux_10
.26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_23
181) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_match.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2)
00/01/05 lib/libc/net/rpc/xdr_mem.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
2003/02/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5hk -
DAV17 ]
99/11/15 seccmd/secpolicy/spdbm.c, hpux, hpux_10.26,
ic5hk Revision 1.7 PATCH_10.26 (PHCO_20467)
01/03/26 lib/libsecurity/discr.c, hpux, hpux_10.26,
ic5hk Revision 1.3 PATCH_10.26 (PHCO_23735)
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
03/02/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_17760
) $
99/05/21 lib/libsecurity/authcap.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_18502
)
ic5ae_DAV17 lib/libc/archive_pa1/libc.a_01
Feb 24 2003 12:03:18
/tcb/bin/m6d:
HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
03/02/24 lib/libc/core/gen/ctime.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_17823
) UNMODIFIED
00/01/05 lib/libc/net/net/innetgr.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_all.c, hpux, hpux_10.26,
ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782)
00/01/05 lib/libc/net/yp/yp_bind.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782
)
00/01/05 lib/libc/net/yp/yp_master.c, hpux, hpux_10.
26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_207
82)
01/02/01 lib/libc/core/stdio/doprnt.c, hpux, hpux_10
.26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_23
181) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_match.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2)
00/01/05 lib/libc/net/rpc/xdr_mem.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
2003/02/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5hk -
DAV17 ]
seccmd/msix/m6d.c, m6d, hpux_mlpmp, mlpmp6 $Date: 96
/12/04 15:47:33 $Revision: 1.22 PATCH_10.16
(PHCO_7524)
99/11/15 seccmd/secpolicy/spdbm.c, hpux, hpux_10.26,
ic5hk Revision 1.7 PATCH_10.26 (PHCO_20467)
01/03/26 lib/libsecurity/discr.c, hpux, hpux_10.26,
ic5hk Revision 1.3 PATCH_10.26 (PHCO_23735)
03/02/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_17760
) $
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
99/05/21 lib/libsecurity/authcap.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_18502
)
ic5ae_DAV17 lib/libc/archive_pa1/libc.a_01
Feb 24 2003 12:03:18
/tcb/bin/m6dbck:
HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
03/02/24 lib/libc/core/gen/ctime.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_17823
) UNMODIFIED
00/01/05 lib/libc/net/net/innetgr.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_all.c, hpux, hpux_10.26,
ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782)
00/01/05 lib/libc/net/yp/yp_bind.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782
)
01/02/01 lib/libc/core/stdio/doprnt.c, hpux, hpux_10
.26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_23
181) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_match.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2)
00/01/05 lib/libc/net/rpc/xdr_mem.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
2003/02/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5hk -
DAV17 ]
99/11/15 seccmd/secpolicy/spdbm.c, hpux, hpux_10.26,
ic5hk Revision 1.7 PATCH_10.26 (PHCO_20467)
01/03/26 lib/libsecurity/discr.c, hpux, hpux_10.26,
ic5hk Revision 1.3 PATCH_10.26 (PHCO_23735)
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
03/02/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_17760
) $
99/05/21 lib/libsecurity/authcap.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_18502
)
ic5ae_DAV17 lib/libc/archive_pa1/libc.a_01
Feb 24 2003 12:03:18
/tcb/bin/m6mkdb:
HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
03/02/24 lib/libc/core/gen/ctime.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_17823
) UNMODIFIED
00/01/05 lib/libc/net/net/innetgr.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_all.c, hpux, hpux_10.26,
ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782)
00/01/05 lib/libc/net/yp/yp_bind.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782
)
01/02/01 lib/libc/core/stdio/doprnt.c, hpux, hpux_10
.26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_23
181) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_match.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2)
00/01/05 lib/libc/net/rpc/xdr_mem.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
2003/02/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5hk -
DAV17 ]
99/11/15 seccmd/secpolicy/spdbm.c, hpux, hpux_10.26,
ic5hk Revision 1.7 PATCH_10.26 (PHCO_20467)
01/03/26 lib/libsecurity/discr.c, hpux, hpux_10.26,
ic5hk Revision 1.3 PATCH_10.26 (PHCO_23735)
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
99/05/21 lib/libsecurity/authcap.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_18502
)
03/02/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_17760
) $
ic5ae_DAV17 lib/libc/archive_pa1/libc.a_01
Feb 24 2003 12:03:18
/tcb/bin/macilbd:
HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
00/01/05 lib/libc/net/net/innetgr.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_all.c, hpux, hpux_10.26,
ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782)
01/02/01 lib/libc/core/stdio/doprnt.c, hpux, hpux_10
.26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_23
181) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_bind.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782
)
00/01/05 lib/libc/net/yp/yp_match.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2)
00/01/05 lib/libc/net/rpc/xdr_mem.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
2003/02/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5hk -
DAV17 ]
03/02/24 seccmd/secpolicy/macilbd.c, hpux, hpux_10.2
6, ic5hk Revision 1.6 PATCH_10.26 (PHCO_1776
0)
99/11/15 seccmd/secpolicy/spdbm.c, hpux, hpux_10.26,
ic5hk Revision 1.7 PATCH_10.26 (PHCO_20467)
03/02/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_17760
) $
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
ic5ae_DAV17 lib/libc/archive_pa1/libc.a_01
Feb 24 2003 12:03:18
/tcb/bin/mkdb:
HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
evision: 74.03 $
03/02/24 lib/libc/core/gen/ctime.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_17823
) UNMODIFIED
00/01/05 lib/libc/net/net/innetgr.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_all.c, hpux, hpux_10.26,
ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782)
00/01/05 lib/libc/net/yp/yp_bind.c, hpux, hpux_10.26
, ic5hk Revision 1.2 PATCH_10.26 (PHCO_20782
)
01/02/01 lib/libc/core/stdio/doprnt.c, hpux, hpux_10
.26, ic5hk Revision 1.2 PATCH_10.26 (PHCO_23
181) UNMODIFIED
00/01/05 lib/libc/net/yp/yp_match.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2)
00/01/05 lib/libc/net/rpc/xdr_mem.c, hpux, hpux_10.2
6, ic5hk Revision 1.2 PATCH_10.26 (PHCO_2078
2) UNMODIFIED
2003/02/24 Hewlett-Packard HP-UX 10.26 TOS [ ic5hk -
DAV17 ]
99/11/15 seccmd/secpolicy/spdbm.c, hpux, hpux_10.26,
ic5hk Revision 1.7 PATCH_10.26 (PHCO_20467)
01/03/26 lib/libsecurity/discr.c, hpux, hpux_10.26,
ic5hk Revision 1.3 PATCH_10.26 (PHCO_23735)
03/02/24 lib/libsecurity/map_ids.c, hpux, hpux_10.26
, ic5hk Revision 1.16 PATCH_10.26 (PHCO_2875
7)
99/05/21 lib/libsecurity/authcap.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_18502
)
03/02/24 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5hk Revision 1.5 PATCH_10.26 (PHCO_17760
) $
ic5ae_DAV17 lib/libc/archive_pa1/libc.a_01
Feb 24 2003 12:03:18
/usr/include/mandatory.h:
$Revision: 1.6 include/mandatory.h, hpux, hpux_10.26
, ic5bb $ $Date: 99/02/25 16:11:03 $ Hewlett
-Packard Co. */
99/02/26 include/mandatory.h, hpux, hpux_10.26, ic5b
b Revision 1.6 PATCH_10.26 (PHCO_17760) */
/usr/lib/libsec.a(mandlib.o):
99/02/26 lib/libsecurity/mandlib.c, hpux, hpux_10.26
, ic5bb Revision 1.5 PATCH_10.26 (PHCO_17760
) $
/usr/lib/libsec.a(psecerror.o):
99/03/09 lib/libsecurity/psecerror.c, hpux, hpux_10.
26, ic5bo Revision 1.4 PATCH_10.26 (PHCO_178
56)
/usr/lib/libsec.a(getprpwent.o):
03/06/24 lib/libsecurity/getprpwent.c, hpux, hpux_10
.26, ic5ib Revision 1.28 PATCH_10.26 (PHCO_2
9216)
/usr/lib/libsec.a(authcap.o):
99/05/21 lib/libsecurity/authcap.c, hpux, hpux_10.26
, ic5cn Revision 1.5 PATCH_10.26 (PHCO_18502
)
/usr/share/man/man3.Z/mand.3:
None
/usr/share/man/man3.Z/psecerror.3:
None
/usr/share/man/man3.Z/mand_ir_to_class_er.3:
None
/usr/share/man/man3.Z/strsecerror.3:
None
/usr/lib/libsec.a(subsystems.o):
03/04/23 lib/libsecurity/subsystems.c, hpux, hpux_10
.26, ic5ht Revision 1.6 PATCH_10.26 (PHCO_28
919)
cksum(1) Output:
2147740892 3872 /usr/lib/libsec.a(smartcard.o)
3343840040 25148 /usr/lib/libsec.a(map_ids.o)
2824789469 4872 /usr/lib/libsec.a(discr.o)
2307300816 385024 /usr/lib/libsecurity.1
4133915739 523008 /tcb/bin/acld
552436238 642868 /tcb/bin/dbck
3994315659 2097288 /tcb/bin/m6d
1073704621 649592 /tcb/bin/m6dbck
1385638743 626336 /tcb/bin/m6mkdb
4039641505 559972 /tcb/bin/macilbd
342165593 626336 /tcb/bin/mkdb
2696317173 12952 /usr/include/mandatory.h
3481558456 13080 /usr/lib/libsec.a(mandlib.o)
23154580 2072 /usr/lib/libsec.a(psecerror.o)
3700106534 17604 /usr/lib/libsec.a(getprpwent.o)
401969751 14232 /usr/lib/libsec.a(authcap.o)
11071229 10246 /usr/share/man/man3.Z/mand.3
1539658251 1088 /usr/share/man/man3.Z/psecerror.3
11071229 10246 /usr/share/man/man3.Z/mand_ir_to_class_er.3
1539658251 1088 /usr/share/man/man3.Z/strsecerror.3
376502241 15284 /usr/lib/libsec.a(subsystems.o)
Patch Conflicts: None
Patch Dependencies:
s700: 10.26: PHKL_17761 PHCO_20322 PHCO_20022
s800: 10.26: PHKL_17762 PHCO_20322 PHCO_20022
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHCO_28919 PHCO_28757 PHCO_27822 PHCO_18502 PHCO_18179 PHCO_17856
PHCO_17760 PHCO_19042 PHCO_20430 PHCO_20467 PHCO_23735
Equivalent Patches: None
Patch Package Size: 2470 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_29216
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHCO_29216.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHCO_29216. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHCO_29216.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_29216.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
-----End of Document ID: PHCO_29216------------------------------------------
Document ID: PHSS_29137
Date Loaded: 20030624
Title: s700_800 10.20 OV OB4.10 patch - CORE packet
Patch Name: PHSS_29137
Patch Description: s700_800 10.20 OV OB4.10 patch - CORE packet
Creation Date: 03/06/23
Post Date: 03/06/24
Hardware Platforms - OS Releases:
s700: 10.20
s800: 10.20
Products:
OmniBackII A.04.10
Filesets:
OMNIBACK-II.OMNI-CORE-IS,A.04.10
OMNIBACK-II.OMNI-JPN-LS-P,A.04.10
OMNIBACK-II.OMNI-INTEG-P,A.04.10
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_29137
Symptoms:
PHSS_29137:
Id = HSLco38421 SR: H555009102
OmniBack II backs up "pseudo" file systems like
"procfs", "autofs", "namefs" etc twice.
Id = HSLco40611 SR: H555009907
Autoconfiguration of NEC libraries fails.
Id = HSLco41413 SR:H555010282
If Solaris OS uses only "/etc/hosts" file for
name resolving ".util HOSTNAME" command fails
with error:
"*** Can't find server name for address
127.0.0.1: No response from server
*** Default servers are not available."
Id = JAGae62938 SR: 8606299444
Executing "Check Installation" results in the
following error:
"|Critical| |110:1043| Hostname reported by client
(client_name) does not match with its name in the
Cell Manager configuration files (client_name).
|Critical| <client_name> Update of client system
<client name> FAILED! "
PHSS_28584:
Id = HSLco40059 SR: H555009621
Backup of Oracle8 database reports the following
warning:
"Warning: Invalid environment setting".
Id = HSLco36196 SR: H555008622
Installation and configuration packages do not exist
for IBM AIX 5L operating system.
PHSS_28232:
Id = HSLco36659 SR: H555008681
When using command "omnidb -help", -msese argument is
not displayed.
Id = HSLco37433 SR: H555008856
When restoring Object with using "Interval",
in the restore Graphical User Interface
the following message is displayed:
"Bad catalog access for message #10928 in set 12".
Id = HSLco37754 SR: H555008900
In Cell Manager environment with large number of
clients, when operations like check_installation or
add_components are performed at the same time on all
clients, the error message appears for the linux
clients:
"|Critical| <host>: Unsupported architecture/OS type
(<host> <time>)
Skipping client!".
Id = HSLco38032 SR: H555008977
During Oracle Split Mirror Backup Data Protector
displays error:
"Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
cannot create
Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
cannot open
|Major| From: ob2rman.exe<hostname> "<barlist_name>"
Time: mm/dd/yy hh:mm:ss
The Production Database is not in automatic archival
mode.
Please set log_archive_start = true in your init.ora
file".
Id = HSLco38113 SR: H555009015
Check Installation feature fails for Red Hat 8.0 Linux
clients.
Id = HSLco38384 SR: H555009084
Installation of Red Hat 8.0 Linux client fails.
Id = HSLco37977 SR: H555008950
After running "omnidbutil -cdbsync" the Catalog
Database (CDB) is lost.
Id = HSLco39544 SR: H555009435
Restore session on HP-UX with vxfs 3 reports error:
"Cannot restore ACLs"
for every file restored.
PHSS_27456:
Id = HSLco33764 SR:H555007590
OmniBack II does not check into what slot mediums were
entered when mount request is confirmed.
Id = HSLco34641 SR:H555008020
"Restore to another instance field" is missing in
SQL 2000 restore context.
Id = HSLco35716 SR:H555008511
Data protection and catalog protection date for same
object differs for one day.
Id = JAGad92807 SR:8606223711
The current link in the Info menu is labeled
'OmniBack II FAQ' and it points to:
http://ovweb3.external.hp.com/ovfaq
Id = JAGae08985 SR:8606241727
Upgrade fails on non HP-UX UNIX clients if OmniBack II
port is not default.
PHSS_26349:
Id = HSLco32873 SR: H555007218
When restoring files in an interval that
does not include full backup the following error
appears:
"DB unknown error".
PHSS_25964:
Id = HSLco31142 SR: H555006771
Load balancing is not working properly.
Id = JAGad96899 SR: 8606227839
Omniback II does not support Ext3 filesystem on
Linux systems.
Id = HSLco32089 SR: H555006968
Autorecover fails with:
"Current medium is refused for restore. Aborting!".
Id = HSLco31949 SR: H555006942
OmniBack II A.04.10 GUI abnormally ends when trying to
connect to OmniBack II A.04.00 Cell Manager.
Defect Description:
PHSS_29137:
Id = HSLco38421 SR: H555009102
Output from "mount" command is used directly, without
checking file system type.
Resolution:
Filter mechanism is added in order to exclude "pseudo"
file systems from list of mounpoints.
Id = HSLco40611 SR: H555009907
Device Browser can not recognize NEC Libraries because
"scsitab" file does not have entry for it.
Resolution:
New entry for NEC libraries is added in "scsitab" file.
Id = HSLco41413 SR:H555010282
"nslookup" command on Solaris OS does not look
for hostnames in "/etc/hosts" file.
Resolution:
".util" script is changed in order to return
hostname from "/etc/defaultdomain" and
"/etc/hosts" if "nslookup" command can not resolve
hostname. If "/etc/defaultdomain" file does not
exist ".util" returns only hostname from
"/etc/hosts" file.
Id = JAGae62938 SR: 8606299444
If the system uses only "/etc/hosts" file for name
resolving and the hostname is in uppercase
the OmniBack II name resolving does not work correctly.
Resolution:
The OmniBack II name resolving procedure is changed
in order to correctly handle hostnames written in
uppercase.
PHSS_28584:
Id = HSLco40059
Command "util_cmd -getopt" outputs random data in cases
when empty "Enviroment" subsection in /etc/hosts is
found. This happens because random data is collected
from uninitialized buffer filled during the previous
execution of util_cmd.
Resolution:
Buffer containing "-getopt" data is re-initialized
before every execution.
Id = HSLco36196
Installation and configuration packages do not exist
for IBM AIX 5L operating system.
Resolution:
Installation and configuration packages are added
for IBM AIX 5L operating system.
PHSS_28232:
Id = HSLco36659
Argument "-msese" is missing in the catalog.
Resolution:
Argument "-msese" is added in the catalog.
Id = HSLco37433
Message for restoring Object with using "Interval"
is not added to Japanese message catalog.
Resolution:
Message catalog is updated.
Id = HSLco37754
When adding components to more Linux clients the
variable which holds the index to machine type is
changing, so the machine type matching is not
successful.
Resolution:
Algorithm for unix platform is changed.
Id = HSLco38032
The /var/opt/omni/tmp/smb.(PID) file is not removed
at the completion of the smb_common.sh script.
When the PID is duplicated then the new
/var/opt/omni/tmp/smb.(PID) file can not be created.
Resolution:
The /var/opt/omni/tmp/smb.(PID) file is removed
at the completion of the smb_common.sh script.
Part of SSPUX410_047.
Id = HSLco38113
Red Hat 8.0 Linux command "nslookup" outputs an extra
message which causes Check Installation to fail.
Resolution:
"-silent" option is used when running Check Installation
feature on Red Hat 8.0 Linux clients.
Id = HSLco38384
Default installation of Red Hat 8.0 Linux operating
system does not contain "uncompress" utility.
Resolution:
Data Protector installation on Red Hat 8.0 Linux uses
one of the default decompressing utilities.
Id = HSLco37977
If "omnidbutil -cdbsync" is started on the
Manager-of-Managers client, local Media Management
Database (MMDB) is used for database synchronization.
Resolution:
If command "omnidbutil -cdbsync" is running
on a Manager of Mangers(MOM) client, it issues
an error message and stops the operation.
Id = HSLco39544
While restoring Minor error is reported for every file.
Resolution:
Message "Destination file system does not support ACLs!"
is reported once, and then further occurences of the
error message are suppressed.
PHSS_27456:
Id = HSLco33764
Before loading medium on mount request confirmation
database is not checked properly.
Resolution:
On mount request confirmation database is checked
properly.
Id = HSLco34641
"Restore to another instance" combo box for displaying
instances installed on SQL Server 2000 is missing.
Resolution:
"Restore to another instance" combo box is added.
Id = HSLco35716
Data protection value is improperly calculated.
Resolution:
Data protection calculation is improved.
Id = JAGad92807
This page is outdated. It must be labeled 'eCare
Support' and it must point to:
http://support.openview.hp.com/support.jsp?FromPROD
=ob_4_1
Resolution:
Label and links are fixed.
Id = JAGae08985
Check for echo command is not done correctly.
Resolution:
Checking mechanism is corrected.
PHSS_26349:
Id = HSLco32873
Selecting files for restore within interval that
does not include the full backup will trigger
an error.
Resolution:
The error is marked and send to the Graphical User
Interface (GUI), which displays a message:
"You have chosen an interval which
doesn't include all the sessions needed to
compose a full restore chain. Please reconnect
to the Cell Server."
PHSS_25964:
Id = HSLco31142
There is no warning reported when one creates a
datalist or a barlist with load balancing enabled and
minimum number of devices greater than number of
configured logical devices.
Resolution:
New warning is added.
Id = JAGad96899
Omniback II does not support Ext3 filesystem on
Linux systems.
Resolution:
Omniback II supports Ext3 filesystem on Linux systems.
Id = HSLco32089
There are duplicated strings in the messages reported
by OmniBack during autorecover.
Resolution:
Duplicated messages are removed from message catalog.
Id = HSLco31949
Any attempt to establish connection to OmniBack II
A.04.00 Cell Manager from OmniBack II A.04.10 GUI,
when having no permissions to do so, results in
core dump of OmniBack II A.04.10 GUI.
Resolution:
Message "No permission" is displayed when one tries to
connect to a system where one does not have
sufficient permissions.
Part of SSPUX410_004.
SR:
H555009907 H555009981 H555009102 8606299444 H555010282
H555009621 H555008622 H555008891 H555008856 H555008667
H555008686 H555009015 H555008977 H555008900 H555008632
H555008641 H555008651 H555009435 H555009084 H555008950
H555008681 H555008807 H555008020 8606241727 8606223711
H555007590 H555008511 H555007218 8606227839 H555006942
H555006968 H555006771
Patch Files:
/opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
A.04.10/packet.Z
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
require.dat
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.10/
packet.Z
/opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
A.04.10/packet.Z
/opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
A.04.10/packet.Z
/opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
A.04.10/packet.Z
/opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.10/
packet.Z
/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-1020/
A.04.10/packet.Z
/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
packet.Z
/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
require.dat
/opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.10/
packet.Z
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
packet.Z
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
require.dat
/opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
A.04.10/packet.Z
/opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar
/opt/omni/databases/utils/gpl/i386/linux-60/utils.tar
/opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar
/opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar
/opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar
/opt/omni/databases/utils/ibm/rs6000/aix-51/utils.tar
/opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar
/opt/omni/databases/utils/sco/i386/sco_sv/utils.tar
/opt/omni/databases/utils/sco/i386/unixware/utils.tar
/opt/omni/databases/utils/sequent/i386/dynix/utils.tar
/opt/omni/databases/utils/sgi/mips/irix-62/utils.tar
/opt/omni/databases/utils/siemens/r400/sinix/utils.tar
/opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar
/opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar
/opt/omni/lbin/bmsetup
/opt/omni/lbin/.CII_CORE-IS
what(1) Output:
/opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
A.04.10/packet.Z:
None
/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
require.dat:
None
/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
A.04.10/packet.Z:
None
/opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
A.04.10/packet.Z:
None
/opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
A.04.10/packet.Z:
None
/opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-1020/
A.04.10/packet.Z:
None
/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
require.dat:
None
/opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
require.dat:
None
/opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
A.04.10/packet.Z:
None
/opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar:
None
/opt/omni/databases/utils/gpl/i386/linux-60/utils.tar:
None
/opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar:
None
/opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar:
None
/opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar:
None
/opt/omni/databases/utils/ibm/rs6000/aix-51/utils.tar:
None
/opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar:
None
/opt/omni/databases/utils/sco/i386/sco_sv/utils.tar:
None
/opt/omni/databases/utils/sco/i386/unixware/utils.tar:
None
/opt/omni/databases/utils/sequent/i386/dynix/utils.tar:
None
/opt/omni/databases/utils/sgi/mips/irix-62/utils.tar:
None
/opt/omni/databases/utils/siemens/r400/sinix/utils.tar:
None
/opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar:
None
/opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar:
None
/opt/omni/lbin/bmsetup:
[TZ=GMT0 /opt/omni/lbin/bmsetup -version]
HP OpenView OmniBack II A.04.10: BMSETUP, internal b
uild PHSS_29137/PHSS_29138, built on Wed Jun
4 09:34:13 2003
/opt/omni/lbin/.CII_CORE-IS:
None
cksum(1) Output:
1593625532 1858253 /opt/omni/databases/vendor/omnicf/dec/
alpha/osf1-4/A.04.10/packet.Z
626441493 1374677 /opt/omni/databases/vendor/omnicf/gpl/
i386/linux-60/A.04.10/packet.Z
4184972344 1759727 /opt/omni/databases/vendor/omnicf/hp/
s800/hp-ux-1020/A.04.10/packet.Z
895974907 1767831 /opt/omni/databases/vendor/omnicf/hp/s800/
hp-ux-11/A.04.10/packet.Z
3356960568 1611983 /opt/omni/databases/vendor/omnicf/ibm/
rs6000/aix-42/A.04.10/packet.Z
1351761271 18 /opt/omni/databases/vendor/omnicf/ibm/rs6000/
aix-51/A.04.10/require.dat
864987974 1620597 /opt/omni/databases/vendor/omnicf/ibm/
rs6000/aix-51/A.04.10/packet.Z
4133457961 1565831 /opt/omni/databases/vendor/omnicf/ncr/
i386/mp-ras/A.04.10/packet.Z
1133337245 1525781 /opt/omni/databases/vendor/omnicf/sco/
i386/sco_sv/A.04.10/packet.Z
337844045 1497053 /opt/omni/databases/vendor/omnicf/sco/
i386/unixware/A.04.10/packet.Z
3206128836 1540527 /opt/omni/databases/vendor/omnicf/
sequent/i386/dynix/A.04.10/packet.Z
1186509173 1811603 /opt/omni/databases/vendor/omnicf/
siemens/r400/sinix/A.04.10/packet.Z
519500942 1623207 /opt/omni/databases/vendor/omnicf/sun/
sparc/solaris-26/A.04.10/packet.Z
3927684842 2243687 /opt/omni/databases/vendor/omnicf/sgi/
mips/irix-62/A.04.10/packet.Z
821937929 13223651 /opt/omni/databases/vendor/jpn_ls/hp/
s800/hp-ux-1020/A.04.10/packet.Z
3679214014 13223683 /opt/omni/databases/vendor/jpn_ls/hp/
s800/hp-ux-11/A.04.10/packet.Z
2682333999 2312509 /opt/omni/databases/vendor/integ/dec/
alpha/osf1-4/A.04.10/packet.Z
2556158646 17 /opt/omni/databases/vendor/integ/dec/alpha/
osf1-4/A.04.10/require.dat
2104963712 1572398 /opt/omni/databases/vendor/integ/gpl/
i386/linux-60/A.04.10/packet.Z
1115546228 2318337 /opt/omni/databases/vendor/integ/hp/s800/
hp-ux-1020/A.04.10/packet.Z
1079684385 2318795 /opt/omni/databases/vendor/integ/hp/s800/
hp-ux-11/A.04.10/packet.Z
202835207 2316179 /opt/omni/databases/vendor/integ/ibm/
rs6000/aix-42/A.04.10/packet.Z
1143863115 2319091 /opt/omni/databases/vendor/integ/ibm/
rs6000/aix-51/A.04.10/packet.Z
1351761271 18 /opt/omni/databases/vendor/integ/ibm/rs6000/
aix-51/A.04.10/require.dat
375362772 2036041 /opt/omni/databases/vendor/integ/sun/
sparc/solaris-26/A.04.10/packet.Z
3999542511 51200 /opt/omni/databases/utils/dec/alpha/osf1-4/
utils.tar
998960559 51200 /opt/omni/databases/utils/gpl/i386/linux-60/
utils.tar
1152941383 40960 /opt/omni/databases/utils/hp/s800/
hp-ux-1020/utils.tar
1152941383 40960 /opt/omni/databases/utils/hp/s800/hp-ux-11/
utils.tar
3550848943 51200 /opt/omni/databases/utils/ibm/rs6000/
aix-42/utils.tar
3550848943 51200 /opt/omni/databases/utils/ibm/rs6000/
aix-51/utils.tar
1459754954 51200 /opt/omni/databases/utils/ncr/i386/mp-ras/
utils.tar
472814854 51200 /opt/omni/databases/utils/sco/i386/sco_sv/
utils.tar
472814854 51200 /opt/omni/databases/utils/sco/i386/unixware/
utils.tar
1459754954 51200 /opt/omni/databases/utils/sequent/i386/
dynix/utils.tar
3510794158 51200 /opt/omni/databases/utils/sgi/mips/irix-62/
utils.tar
2723478847 51200 /opt/omni/databases/utils/siemens/r400/
sinix/utils.tar
1867883458 51200 /opt/omni/databases/utils/sun/sparc/
solaris-26/utils.tar
320273293 51200 /opt/omni/databases/utils/sun/sparc/
solaris-7/utils.tar
4081584131 427209 /opt/omni/lbin/bmsetup
274919816 71 /opt/omni/lbin/.CII_CORE-IS
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes:
PHSS_25964 PHSS_26349 PHSS_27456 PHSS_28232 PHSS_28584
Equivalent Patches:
PHSS_29138:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Patch Package Size: 58860 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_29137
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHSS_29137.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHSS_29137. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHSS_29137.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_29137.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_29137:
NOTE!
This Patch has to be installed on all Installation
server hosts.
Because the Core package is a part of all agents, all
client packages need to be redistributed after this patch
was installed on the installation server in order to
enable the changes (Disk Agents, Media Agents, ...).
Patch includes the following Site Specific Patches:
SSPUX410_004
SSPUX410_047
-----End of Document ID: PHSS_29137------------------------------------------
Document ID: PHSS_28742
Date Loaded: 20030624
Title: s700_800 10.20 OV OB4.10 patch - SSEA packet
Patch Name: PHSS_28742
Patch Description: s700_800 10.20 OV OB4.10 patch - SSEA packet
Creation Date: 03/06/23
Post Date: 03/06/24
Hardware Platforms - OS Releases:
s700: 10.20
s800: 10.20
Products:
OmniBackII A.04.10
Filesets:
OMNIBACK-II.OMNI-SSEA-P,A.04.10
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28742
Symptoms:
PHSS_28742:
Id = HSLco38904 SR: H555009231
OmniBack II A.04.10 does not support XP1024 split
mirror box.
Id = HSLco39583 SR: H555009456
SSEA backup session report displays messages:
"|Normal| From: SSEA<hostname> "" Time: <time>
ABORTED SSEA-Backup Agent on <hostname>.
|Normal| From: SSEA<hostname> "" Time: <time>
ABORTED SSEA-Application Agent on <hostname>.
|Critical| From: BSM<hostname> "<datalist>"
Time: <time>
None of the Disk Agents completed successfully.
Session has failed.".
Id = HSLco40897 SR: H555010044
During multiple SSEA sessions running at the same time
following is reported in the session report:
"|Major| From: SYMA<R2_hostname> "" Time: <time>
Filesystem <fs_name> could not be mounted
to <mountpoint>.
/usr/sbin/mount -F vxfs -r <fs_name> 2>&1
mount: file system table may be corrupt".
Id = HSLco41311 SR: H555010251
Volume group activation fails during Instant Recovery.
Id = HSLco41923 SR:H555010436
SSEA integration backup fails with:
"[Major] From: OB2BAR<backup_hostname> Time:<time>
Resolve of the disks fails.
"[Major] From: OB2BAR<backup_hostname> Time:<time>
Resolving to disk level failed (error=-14)".
PHSS_28338:
Id = HSLco38493 SR: H555009140
Aborting SSEA Integration backup session after the
mirror disks have been split, leaves backup system
enabled.
Id = HSLco39063 SR: H555009270
SSEA Integration backup occasionally fails with:
"|Critical| From: BSM<hostname> <barlist>
Time: <time>
None of the Disk Agents completed successfully.
Session has failed."
Id = HSLco39896 SR: H555009573
Instant Recovery fails reporting an invalid BC pairs
status.
PHSS_27593:
Id = HSLco36407 SR:H555008644
During an OmniBack II XP Integration restore
following error message is reported:
"[Major] From: SSEA<hostname> "" Time: <time>
Filesystem /dev/vx/dsk/<disk_group>/<lvol>
could not be dismounted from /<mountpoint>
(Details unknown.)".
Id = HSLco36669 SR:H555008685
In some cases SSEA takes a long time to resolve
all the objects on the backup side.
Id = HSLco37123 SR:H555008788
SSEA backup fails with:
"/usr/sbin/vgchange -q n -a y /dev/<vg_name>
[Major] From: SSEA<hostname> "" Time: <time>
Volume group /dev/<vg_name> could not be activated.".
Id = HSLco37703 SR:H555008886
SSEA agent abnormally ends on the application side
after Disk Agents are completed successfully.
Id = HSLco37704 SR:H555008887
The connection with the host running SSEA agent is
broken.
PHSS_26883:
Id = HSLco32243 SR: H555006991
OmniBack II XP split-mirror backup fails with:
"[Critical] From: SSEA<hostname> "" Time: <time>
Failed to attach to the command device <device>.
(Bad catalog access for message #10822 in set 12!)"
Id = HSLco32969 SR: H555007253
OmniBack II XP split-mirror backup fails with:
"[Major] From: SSEA<hostname> "" Time: <time>
Failed to split the BC pair of
LDEV <ldev#>, SEQ# <seq#>, MU# <mu#>."
Id = HSLco33105 SR: H555007298
SSEA agent dies ungracefully right after the last
medium is unloaded at the end of backup.
Id = HSLco33681 SR: H555007572
OmniBack II XP integration sessions fail with:
"[Major] From: SSEA<hostname> "" Time: <time>
Failed to split the <BC or CA> pair of
LDEV <ldev#>, SEQ# <seq#>, MU# <mu#>."
Id = HSLco33697 SR: H555007572
OmniBack II XP Integration backup reports:
"[Warning] From: SSEA<hostname> "" Time: <time>
File system <filesystem_path> could not be mounted
to <mountpoint>. ([27] File too large)."
Id = HSLco34841 SR: H555008141
Pre- and post-exec scripts are improperly executed under
shell or "sh -c" type.
Id = HSLco35984 SR: H555008573
During an OmniBack II XP Integration backup following
error message is reported:
"[Critical] From: SSEA<hostname> "" Time: <time>
Failed to attach to the command device <device>.
(Raid Manager LIB Error: [2] Can't attach to the
command device.)"
Id = HSLco36041 SR: H555008585
A warning:
"[Warning] From: SSEA<hostname> "" Time: <time>
Failed to get a BC pair for LDEV 0, MU# 0
in RAID <num>. (Details unknown.)"
is reported during an OmniBack II XP Integration
backup.
Id = JAGae22283 SR: 8606257980
OmniBack II XP Integration backup using split-mirror
fails with:
"[Major] From: SSEA<hostname> "" Time: <time>
File system for / object not mounted or local
disk is in backup."
Defect Description:
PHSS_28742:
Id = HSLco38904
OmniBack II A.04.10 does not support XP1024 split
mirror box.
Resolution:
OmniBack II A.04.10 supports XP1024 split mirror box.
Id = HSLco39583
pairvolstat () API call fails for some disks.
Resolution:
Three parameters (linenumber, detailerrno and
sourcename)of pCmd data structure which holds
information used forcalling the pairvolstat() API are
re-initialized beforea new pairvolstat() call. Call of
ErrClearError is addedin SarQuery function.
Part of SSPUX410_063.
Id = HSLco40897
In the situation when multiple SSEA backups are running,
and the R2 host is being prepared by two or more
sessions at the same time, the mount system command
might fail because the /etc/mnttab is refreshed by one
of the other SSEA sessions at rightthat m-oment.
Resolution:
A retry/sleep is introduced for the problematic mount
system command.
Id = HSLco41311
When the OmniBack II mounts the data from the primary
server to the backup server in order to move data to
tape, it turns off the cluster bit for the volume
group. The problem appears during reactivation of the
volume groups after the Instant Recovery disk
resynchronization is completed. Data is resynchronized
onto the original volume group, but the cluster bit is
still turned off. As a result, volume group activation
fails.
Resolution:
If SSEA_IR_VGCHANGE_A in .omnirc file is set to
"vgchange -a e", "vgchange -c y <volume group name>" is
executed before "vgchange -a e <volume group name>" in
order to turn on the cluster bit of the volume group
after instant recovery.
Id = HSLco41923 SR:H555010436
HP-UX LVM Mirroring configuration looks for BC PVOLs
on all involved XP boxes instead of only on the XP
box(es) where the BC is configured.
Resolution:
PVOLs are sought only on the XP box(es) where BC is
configured.
Part of SSPUX410_073.
PHSS_28338:
Id = HSLco38493
Clean-up procedure is not executed after backup session
is aborted. Volume groups on backup host are left
activated with the filesystems mounted.
Resolution:
Proper clean-up procedure (deactivation of volume
groups, umounting the filesystems and re-synching the
mirror) is executed after backup session is aborted.
Part of SSPUX410_055.
Id = HSLco39063
Backup session fails because of incorrect information
sent to pairvolstat() API.
Resolution:
The data structure carrying the information to be
provided to pairvolstat() API is re-initialized before
executing new pairvolstat() call.
Id = HSLco39896
If only one BC pair target disk is configured for
Instant Recovery, then the session fails due to
incorrect checking for more target disks.
Resolution:
Status checking for target disks is improved in a
manner that it correctly recognizes what disks are
going to be used for Instant Recovery.
PHSS_27593:
Id = HSLco36407
If during the restore SSEA fails to unmount the
only mountpoint present in the session on the
application side, agent proceeds with synching
and splitting the disks although it should abort
the session.
Resolution:
If the only mountpoint present in the session fails
to be unmounted on the application side, then the
session fails immediately.
If there are multiple mountpoints in the session,
and some of the mountpoints fail to be unmounted
then SSEA skips the restore of the disks related
to those mountpoints, but proceeds the restore of
disks related to the mountpoints that were
successfully unmounted.
Id = HSLco36669
Resolving of objects from Business Copy XP on backup
host proceeds very slowly if some (out of backup)
objects are in PAIR state:
-CA PAIR are in PSUS/SUSU: resolving takes less
then <x> minutes,
-CA PAIR are in PAIR state: resolving takes more
then <6*x> minutes.
The resolving algorithm has a very bad performance
in this case.
Resolution:
The resolving algorithm is improved.
Part of SSPUX410_041.
Id = HSLco37123
If the application side is configured in a MC/SG
cluster then the volume groups on the backup side
can not be activated in the read/write mode with
"vgchange -q n -a y" command.
Resolution:
The volume group on the backup side is marked as
"not clustered" with the "vgchange -q n -c n" command
before the activation in the read/write mode happens.
To change this behavior set the SMB_CLUS_DEACT=1
environment variable in the .omnirc file on the R2 host.
Part of SSPUX410_044.
Id = HSLco37703
The allocated buffer size is too small.
Resolution:
The allocated buffer size is increased.
Id = HSLco37704
In environments where the firewall between Cell Server
and client(s) with firewall idle timeout of <x>
minutes is present, it can happen that an agent is in
idle state for the amount of time longer than mentioned
timeout. In such cases, firewall breaks the connection
between Cell Server and the client(s).
Resolution:
New environment variable OB2IPCKEEPALIVE is introduced.
Setting its value to any of YES, TRUE, ON or 1 in
/opt/omni/.omnirc file on Cell Server causes sending a
dummy package from time to time in order to keep the
connection open.
Part of SSPUX410_046.
PHSS_26883:
Id = HSLco32243
SSEA agent tries to attach to the first command device
it finds. In cases when first command device is busy,
SSEA fails to attach.
Resolution:
A list of command devices is created and if one of them
is busy, SSEA agent tries to attach to the next one.
Id = HSLco32969
SSEA agent collects physical volume names from
"vgdisplay" output. In environments where physical
volumes are configured their names are collected as
well although they are not needed for resolving
process. This causes backup to fail.
Resolution:
SSEA agent skips parsing of "vgdisplay" command as
soon as "PVG name" token is encountered.
Part of SSPUX410_010.
Id = HSLco33105
SSEA agent dies when updating XP database because of
buffering problem.
Resolution:
Buffer holding logical devices information is extended.
Part of SSPUX410_011.
Id = HSLco33681
A "Major" message is displayed instead of "Warning" is
environments with LVM mirroring on application side.
Resolution:
Message level is lowered to the level documented in
XP Integration Guide.
Id = HSLco33697
Some combinations of mount API options and ownerships
of disk groups cause failures when import mapfile from
Application to Backup host.
Resolution:
Command line mount is used instead of mount API.
Id = HSLco34841
Scripts are executed with ".%s" which is "sh" instead of
script name.
Resolution:
The dot is removed from function that executes the
scripts.
Id = HSLco35984
Attaching fails in environments where alternate links
are used because of incorrect instance number counting.
Resolution:
Instance numbers are properly counted if alternate links
are used.
Id = HSLco36041
SSEA agent improperly handles "LDEV 0" (unknown logical
device).
Resolution:
Logical device resolution is improved by adding
additional checking in cases where "LDEV 0" is
encountered.
Part of SSPUX410_032.
Id = JAGae22283
SSEA agent cannot handle "/" (root) mountpoint when
performing a split-mirror backup.
Resolution:
Mountpoint "/" (root) can be used in SSEA split-mirror
backup if following is satisfied:
1. Root mountpoint is located on an XP disk.
2. SSEA_PRESERVE_MOUNTPOINT environment variable is not
set to 1 on Backup host.
3. SSEA_BACKUP_ROOT_MOUNTPOINT environment variable is
set to 1 on Application side.
Note: Such backup cannot be used for Instant Recovery!
SR:
H555010251 H555010044 H555010436 H555009231 H555009456
H555009270 H555009140 H555009573 H555008685 H555008644
H555008886 H555008788 H555008887 H555006991 H555008585
H555007298 H555007748 8606257980 H555008141 H555007253
H555007572 H555007564 H555008573
Patch Files:
/opt/omni/databases/vendor/ssea/sun/sparc/solaris-7/A.04.10/
packet.Z
/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-11/A.04.10/
packet.Z
what(1) Output:
/opt/omni/databases/vendor/ssea/sun/sparc/solaris-7/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
cksum(1) Output:
1759720013 251779 /opt/omni/databases/vendor/ssea/sun/sparc/
solaris-7/A.04.10/packet.Z
1300315943 523865 /opt/omni/databases/vendor/ssea/hp/s800/
hp-ux-1020/A.04.10/packet.Z
960820909 539177 /opt/omni/databases/vendor/ssea/hp/s800/
hp-ux-11/A.04.10/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If any newer SSP for the SSEA is installed
on your system, you must re-apply the SSP after
installing this SSEA patch.
PHSS_28731:
Cell Server (CS) packet patch,
Release Date: Available
Id = HSLco37704 SR:H555008887
PHSS_28731 is required for this defect fix.
Supersedes:
PHSS_26883 PHSS_27593 PHSS_28338
Equivalent Patches:
PHSS_28743:
s700: 11.00 11.11 11.20
s800: 11.00 11.11 11.20
Patch Package Size: 1300 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_28742
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHSS_28742.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHSS_28742. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHSS_28742.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_28742.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_28742:
NOTE!
This patch has to be installed on the Installation
Server host.
The OB2 SSEA agent must be redistributed to the SSEA
client system(s) after the installation of the patch
in order to get the fixes into effect.
For distribution of the SSEA agent, refer to
the OmniBackII Installation guide.
Patch includes the following Site Specific Patches:
SSPUX410_010
SSPUX410_011
SSPUX410_032
SSPUX410_041
SSPUX410_044
SSPUX410_046
SSPUX410_055
SSPUX410_063
SSPUX410_073
-----End of Document ID: PHSS_28742------------------------------------------
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]