|
Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com |
HP-UX series 800 10.X patch digest
From: IT Resource Center (support_feedback
us-support2-mail.external.hp.com)
Date: Wed Apr 14 2004 - 09:28:11 CDT
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
HP Support Information Digests
===============================================================================
o IT Resource Center World Wide Web Service
---------------------------------------------------
If you subscribed through the IT Resource Center and would
like to be REMOVED from this mailing list, access the
IT Resource Center on the World Wide Web at:
http://support.itrc.hp.com/
Login using your IT Resource Center User ID and Password.
Then select Support Information Digests (located under
Maintenance and Support). You may then unsubscribe from the
appropriate digest.
To download a patch referenced below, access the
IT Resource Center on the World Wide Web at:
http://support.itrc.hp.com/
Login using your IT Resource Center User ID and Password.
Then select Individual Patches (under Maintenance and Support)
to access the patch. You may also download a patch via anonymous
ftp(1) from ftp.itrc.hp.com.
===============================================================================
Digest Name: weekly HP-UX series 800 10.X patch digest
Created: Sun Apr 4 7:15:04 EDT 2004
Table of Contents:
Document ID Title
--------------- -----------
PHCO_30610 s700_800 10.26 Directory patch
PHSS_30141 s700_800 10.20 OV OB4.10 patch - MA packet
The documents are listed below.
-------------------------------------------------------------------------------
Document ID: PHCO_30610
Date Loaded: 20040331
Title: s700_800 10.26 Directory patch
Patch Name: PHCO_30610
Patch Description: s700_800 10.26 Directory patch
Creation Date: 04/03/23
Post Date: 04/03/31
Hardware Platforms - OS Releases:
s700: 10.26
s800: 10.26
Products: N/A
Filesets:
BLS.BLS-CORE
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHCO_30610
Symptoms:
PHCO_30610:
1. Incorrect directory privilege
Defect Description:
PHCO_30610:
1. Few directories have incorrect privilege.
Resolution:
1. This patch corrects the directory privilege.
SR:
0000000000
Patch Files:
/etc/auth/system/files.fcdb/05.base/PHCO_30610.fcdb
what(1) Output:
/etc/auth/system/files.fcdb/05.base/PHCO_30610.fcdb:
$Revision: 1.3 etc/auth/system/files.fcdb/05.base/PH
CO_30610.fcdb, cmds, hpux_10.26, ic5ip $ $Da
te: 04/03/23 13:06:32 $ Hewlett-Packard Co.
04/03/23 etc/auth/system/files.fcdb/05.base/PHCO_306
10.fcdb, cmds, hpux_10.26, ic5ip Revision 1.
3 PATCH_10.26 (PHCO_30610)
cksum(1) Output:
2743291419 1199 /etc/auth/system/files.fcdb/05.base/
PHCO_30610.fcdb
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies: None
Supersedes: None
Equivalent Patches: None
Patch Package Size: 60 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHCO_30610
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHCO_30610.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHCO_30610. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHCO_30610.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHCO_30610.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions: None
-----End of Document ID: PHCO_30610------------------------------------------
Document ID: PHSS_30141
Date Loaded: 20040330
Title: s700_800 10.20 OV OB4.10 patch - MA packet
Patch Name: PHSS_30141
Patch Description: s700_800 10.20 OV OB4.10 patch - MA packet
Creation Date: 04/03/22
Post Date: 04/03/30
Hardware Platforms - OS Releases:
s700: 10.20
s800: 10.20
Products:
OmniBackII A.04.10
Filesets:
OMNIBACK-II.OMNI-ACS-P,A.04.10
OMNIBACK-II.OMNI-DAS-P,A.04.10
OMNIBACK-II.OMNI-HPUX-P,A.04.10
OMNIBACK-II.OMNI-OTHUX-P,A.04.10
OMNIBACK-II.OMNI-FXMA-P,A.04.10
OMNIBACK-II.OMNI-NDMP-P,A.04.10
Automatic Reboot?: No
Status: General Release
Critical: No
Path Name: /hp-ux_patches/s700_800/10.X/PHSS_30141
Symptoms:
PHSS_30141:
Change Request: H555011185
NDMP Backup Media Agent fails with:
"|Critical| From: BSM<host> "<object>" Time:<time>
|61:6002| Error receiving catalog data from the
BMA<host> "<object>".
Ipc subsystem reports: IPC Read Error
System error: |10060| Connection timed out"
Change Request: H555011248
Media Agent operations such as backup and format may
fail with the following error message while
initializing or opening a device:
"|Major| From: MMA<hostname> "<object>" Time:<time>
|90:180| Cannot rewind medium. (Details unknown.)"
Change Request: H555011284
Command "query" does not list LTO tapes.
Change Request: H555011295
Direct Library Access does not work with ACS Media
Agent.
Change Request: H555011613
If tape is already mounted in drive, OmniBack II
detects it as a cleaning tape and reports:
"|Normal| From: BMA-NDMP-ACSCleaning Tape detected."
Change Request: H555011697
Media Agent fails if the "OB2TAPEALERT" environment
variable is set to 1 in the "omnirc" file.
Change Request: H555011999
OmniBack II is sometimes not able to enter tapes from
mailslots on the MSL5000 library.
Change Request: H555012177
When backing up large NDMP objects, greater than 2 TB
or when an estimate of reported bytes to be backed up
is greater then 2 TB (OmniBack II protocol
limitation), the Backup Session Manager (BSM) will
signal the Media Agent to quit if invalid values are
received.
Change Request: H555012208
After installing a general release patch PHSS_29862,
the STK ACS integration does not work properly.
Change Request: H555012237
A tape unloading fails with the following error message:
"|Major| From: BMA-NDMP<hostname> "<object>" Time:
<time> |90:64| Cannot unload exchanger medium (|6| The
handle is invalid.)"
Change Request: H555012361
Parallel scan on the same library fails with the
following error:
"|90:64| Cannot unload exchanger medium
|90:63| Can not load exchanger medium
|90:54| Can not open device."
Change Request: H555012398
If connection between Media Agents (MMA, BMA, RMA, and
UMA) is broken, OmniBack II cannot unload a tape
and reports the following error:
"|Critical| From: BMA-ACS<hostname> "<object>"
Time: <time> Cannot unload drive "0,0,10,2"
STATUS_DRIVE_IN_USE."
PHSS_29861:
Change Request: H555010400
Backup on Linux fails with:
"|Critical| From: UMA<hostname> "" Time:<time>
09:46:50
|90:59| /dev/sgi Cannot open exchanger control
device (Unit is not ready.)"
Change Request: H555010500
Data Protector can not initialize tape on AIX 5.1
client.
Change Request: H555010607
Just before backup completes, the following is reported:
"|Major| From: BSM<host> "<name>" Time:<time>
|61:3003| Lost connection to BMA named "<name>"
on host <host> Ipc subsystem reports: "IPC Read Error
System error: |232| Connection reset by peer."
Change Request: H555010615
When UMA command is used to move the cleaning tape
from or to slot, error message appears:
"|12:1012| Cannot access the file. System error:
|2| No such file or directory."
Change Request: H555010787
Backup session with debugs enabled stops responding
when BSM or BMA debug file reaches 2GB in size.
Change Request: H555010789
Sanconf utility incorrectly reads serial number from
the inquiry buffer and device configuration is
therefore not possible.
Change Request: H555010804
When trailing filemark write operation fails, backup
media agent is not aborted and media is not marked
as poor.
Change Request: H555010978
When device error occurs device error notifications
are not being sent.
Change Request: H555010980
Backup session fails with error message:
"|Critical| From: BMA-NDMP-ACS<host> "<dev>"
Time:<time>
StorageTek ACS error in "<dev>":
STATUS_SUCCESS".
Change Request: H555011003
Backup operation fails during tape load or unload
with the following message:
"|Major| From: BMA|90:63|Cannot load exchanger medium
(logical unit is in process of becoming ready)".
PHSS_28745:
Change Request: H555009054
Backup fails with an error:
"|Critical| From: BMA<host> "<device>" Time:<time>
|90:30| SM/MA protocol error => aborting"
Change Request: H555009430
Sanconf does not recognize the device that does not
have the /dev/rmt/*mn file name standard.
Change Request: H555009630
Restore session from physically write protected tapes
fails with following error message:
"|Major| From: RMA-NDMPhostname.com <host> <time>
Cannot open device (The medium is Write Protected.)"
Change Request: H555009873
Format of SuperDLT tape fails with an error:
"|Critical| From: <host> "datalist" <time>
|90:41| Invalid device type specified (14) =>
aborting".
Change Request: H555009914
TapeAlert functionality for detecting dirty drives is
disabled by default.
Change Request: H555010030
During NDMP Backup Session Omniback II Database gets
corrupted, which can be detected by running a
"omnidbcheck -sibf" command .
Change Request: H555010150
Backup session fails with an error:
"|Minor| From: <host> "datalist" <time>
|90:190| Invalid format version of OmniBack
II medium."
Change Request: H555010157
Device T9840 is not supported.
Change Request: H555010199
NDMP restore of the appending backup fails on EMC Calera
systems.
Change Request: H555010214
Autoconfiguration of Bnchmark VS160, Compaq VS160,
HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
FastStor 2 Autoloader, HP SS1016 Artic Wolf, HP MSL6000
Series, HP ESL9000 Series, SEAGATE DAT DAT 06241-xxx
and Spectra-Logic Gator libraries fails.
Change Request: H555010277
There are inconsistencies in output of silo query
command. Comparing the output of two commands: "omnimm
-repository" and "omnimm -silo_query" returuns different
results.
Change Request: H555010317
Tape does not get unloaded at the end of the backup
session.
Change Request: H555010332
Media Agent fails when it tries to connect to the STK
library if logical drive name is different from user id.
Change Request: H555010392
ACS and DAS Media Agent do not create tape statistics
logs.
PHSS_28333:
Change Request: H555006826
Tape is not marked poor after append fails.
Change Request: H555008826
Restore of incrementally backed up objects fails.
Change Request: H555008870
"ssi.sh" script fails with error:
"/opt/omni/acs/ssi.sh|17|: grep: not found.
Starting ACS daemons...
/opt/omni/acs/ssi.sh|4|: ps: not found.
/opt/omni/acs/ssi.sh|4|: grep: not found.
Problems starting ACS Event Logger
Unsuccessful in starting ACS daemons".
Change Request: H555009018
OmniBack II is not gathering tape I/O operation
statistics.
Change Request: H555009027
OmniBack II does not show the copy progress of tapes
in the GUI/CLI session report.
Change Request: H555009078
Autoconfiguration of Mammoth2 device fails.
Change Request: H555009095
When running backup and "omnimm -silo_query" command
at the same time, status of tapes that are used for
backup is set to "non resident".
Change Request: H555009101
Initialization of Magneto Optical (MO) medium fails
with error:
"|Major| From: MMA<host> "device" Time: <time>
|90:129| Medium has no capacity."
Change Request: H555009139
Media Agent reports errors:
"|Minor| From: BMA<host> "<device>" Time: <time>
|90:197| Could not read data (attribute
ID=AUX_OMNIBACK_MEDIA_HEADER) from cartridge memory ().
|Minor| From: BMA<host> "<device>" Time:<time>
|90:198| Could not write data (attribute
ID=<Host attributes>) from cartridge memory ()."
Change Request: H555009315
Backup fails with error:
"|Major| From: BMA<host> "<device>" Time: <time>
|90:51| |16| Device busy
Cannot write to device ((NULL))"
Change Request: H555009407
OmniBack II is performing unnecessary cleanings on
DLT drives.
Change Request: H555009859
Even if "OB2ACS_VOLUMEDRIVE_POOR=1" option is enabled
in ".omnirc" file, OmniBack II does not mark tape as
"Poor" in case tape mount operation fails with
ACS error: "STATUS_VOLUME_IN_DRIVE".
PHSS_27458:
Change Request: H555006734
When testing the drive cleaning configuration
using OmniBack II dirty drive simulation method
on DDS4 autoloader DAT40x6i/e the tape
unload fails with the following error message:
"[12:5] Internal error in
("/src/ma/pol/polmax.c /main/r31_split/3":565)
=> process aborted
This is an unexpected condition and is likely
due to a combination of circumstances involving
both this product and the operating system.
Report this error to your post-sales OmniBack II
Support Representative."
Change Request: H555007993
devbra is not working properly with devices in
environments where "st_san_safe" kernel parameter
is enabled.
Change Request: H555008050
Backup on LTO device on AIX platform fails with error:
"Cannot close after write problem. ([5] There is an
input or output error.)"
Change Request: H555008179
New inquiry strings are needed for Compaq devices.
Change Request: H555008242
During backup of NDMP integration Backup Media Agent
session completes with failures.
Change Request: H555008328
Backup fails with error:
"[90:135] Can not eject medium. ([5] I/O error)"
Change Request: H555008428
Auto configuration of Overland Data Neo Series
LXN2000 and Neo Series LXN4000 with Quantum
SDLT220 tape drives does not work.
Change Request: H555008496
OmniBack II displays incorrect message in Graphical
User Interface (GUI) when Medium header check
verification is performed:
"Medium verification completed, 0 errors found"
Change Request: H555008504
Bulk eject functionality does not work after
installing patch PHSS_26357/PHSS_26358.
Change Request: H555008634
OmniBack II does not unload tape at the end of the
backup.
Change Request: B555014660
Sanconf does not distinguish between tape devices
having serial numbers longer than 10 digits.
Change Request: H555008680
Cell Manager list and reformat does not work on
UNIX platforms.
Change Request: H555008555
Backup to multihost device fails in case that
reconnect option is used.
Change Request: H555008610
When during the backup end of tape is reached BMA
ends abnormally.
Change Request: H555008655
Backup to file device fails with error:
"[Major] From: BMA<host_name> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
[90:51] /FileDevice
Cannot write to device ([27] File too large)"
Change Request: H555008834
Backup to tape device on AIX platform fails with error:
"[Major] From: MMA<host_name> "<device_name>"
Time: <dd.mm.yy hh:mm:ss>
[90:173] REQUEST SENSE call failed.
Possible cleanme signal detection failure.
([14] Bad address)"
"[Critical] From: MMA<host_name> "device_name"
Time: <dd.mm.yy hh:mm:ss>
[90:43] /dev/rmt0.1
Invalid physical device type => aborting"
Change Request: H555008753
Incremental backup of big Net App filer volumes fails
if there are a lot of exclude parameters specified.
Change Request: H555008728
Backup to direct access media fails with error:
"Cannot write to device
([6] No such device or address)"
Change Request: H555008608
ACS Media Agent does not retry on errors.
Change Request: H555008747
Backup to 9840 device fails with error:
"Invalid physical device type => aborting."
Change Request: 8606263710
Backup to tape drive fails if cleaning tape is loaded.
PHSS_26357:
Change Request: H555007269
Library robotic mechanism is not released after tape
eject.
Change Request: H555007381
After failed backup session due to an I/O drive status
error, important information about the error in
debug.log file is missing.
Change Request: H555007513
Medium verification error is reported after
successfully completed backup:
"Medium verification completed, 1 errors found".
Change Request: H555007663
ACSLS query fails for STK 9940 media.
Change Request: H555007700
Backup fails with an error:
"[Critical] From: BMA<HOST> "<DEVICE>" Time:<TIME>
[90:30] SM/MA protocol error => aborting"
Change Request: H555007739
After OmniBack II detects dirty drive and loads a
cleaning tape, option for medium header check aborts
the backup session.
Change Request: H555007798
If 'InitOnLoosePolicy' is set to 0 and foreign tape
is loaded OmniBack II aborts backup session instead
of issuing a mount request.
Change Request: B555013119
Sony DTF device does not work correctly.
PHSS_26219:
Change Request: H555006666
Omniback does not check if the medium is corrupted
at the end of the backup.
Change Request: H555006790
DAS Media Agent cannot handle more than 15 drives.
Change Request: H555006798
Querying GRAU libraries hangs.
Change Request: H555006885
ACS Media Agent does not recognize LTO drives.
Change Request: B555012905
NDMP Media Agent packages do not contain devbra.
Change Request: H555006608
OmniBackII A.04.10 does not support HP VS80 and
Benchmark VS640 libraries.
Change Request: H555007051
During backup following messages are reported:
[Normal] From: BSMHostName "Datalist" Time: <time>
[61:1011] Received reconnect request from BMAHostName
"Device".
[Normal] From: BSMHostName "Datalist" Time: <time>
BMAHostName "Device" reconnected successfully.
Defect Description:
PHSS_30141:
Change Request: H555011185
Catalog dynamic reallocation for filenames longer than
1024 characters is not working properly.
Resolution:
Catalog dynamic reallocation for filenames is improved.
Change Request: H555011248
The error occurs during an FC adapter driver drive
initialization.
Resolution:
The "OB2FORCESCIOLSTOP" variable is introduced in the
"omnirc" file. If enabled, it overrides the "adapter
already in use" problem.
Change Request: H555011284
Data Protector does not properly recognize LTO tapes.
Resolution:
Command "query" properly handles LTO tapes.
Change Request: H555011295
"Direct Library Access" functionality is not
implemented for ACS Media Agent.
Resolution:
Functionality for ACS Media Agent is implemented.
Change Request: H555011613
OmniBack II marks occupied tapes as cleaning tapes.
Resolution:
Error handling for occupied tape is changed. If the
environment variable "OB2ACS_VOLUMEDRIVE_POOR" is set
to 1 (OB2ACS_VOLUMEDRIVE_POOR=1), occupied tapes are
marked as poor and session does not fail.
If "OB2ACS_VOLUMEDRIVE_POOR" is set to 0
(OB2ACS_VOLUMEDRIVE_POOR=0), the session fails.
Change Request: H555011697
OmniBack II does not properly send a command
for tape alert.
Resolution:
Tape Alert functionality is improved.
Change Request: H555011999
OmniBack II tries to enter tapes while the picker is
still busy.
Resolution:
New environment variable OB2READELEMENTSTATUSRETRY=n
(n = number of retries) is introduced in the "omnirc"
file.
Change Request: H555012177
The procedure for handling estimated and written bytes
has problems with some values reported from the NDMP
server.
Resolution:
The procedure for handling estimated and written bytes
is improved.
Change Request: H555012208
If the "OB2USERID=1" environment variable is set in
the "omnirc" file, OmniBack II does not properly set
the user ID for the connection to the ACSLS server.
Resolution:
If the "OB2USERID=1" environment variable is set in
the "omnirc" file, OmniBack II uses a logical name of
a drive name for the user ID (ACSAPI_USER_ID).
Change Request: H555012237
If the library picker is connected to the local system
and a drive is connected to the NDMP server, an
illegal SCSI operation is attempted during a NDMP tape
unloading.
Resolution:
The correct operation is performed during a NDMP tape
unloading.
Change Request: H555012361
OmniBack II cannot handle multiple scans. Command
"Move Medium" fails. Possible error message is:
"Logical unit not ready, cause not reportable (ASC: 04
ASCQ: 00) Not ready to ready transition (Medium may
have changed) (ASC: 28 ASCQ: 00)."
Resolution:
Retries for command "Move Medium" are implemented in
case the command fails. Number of retries can be
increased through "omnirc" environment variables
"OB2MOUNTRETRY" and "OB2DISMOUNTRETRY".
Change Request: H555012398
Second Utility Media Agent (UMA) cannot dismount a
tape from a drive because the tape is still locked by
the first UMA.
Resolution:
When connection between Media Agents is broken,
OmniBack II successfully unloads a tape from a drive.
PHSS_29861:
Change Request: H555010400
Data Protector is failing to access the robotics on
Linux. Ioctl function is unsuccessfully repeated 60
times and then it fails.
Resolution:
Device major number is checked with fstat, if it is
21 (sg device), SCSI command is passed with
SCTL_io_linux_SG_driver function. Sending SCSI command
with SCSI_IOCTL_SEND_COMMAND ioctl to sg is deprecated.
Change Request: H555010500
When Data Protector tries to load the tape, Media agent
aborts session.
Resolution:
Data Protector successfully initializes tape.
Change Request: H555010607
BMA closes too quickly and because of that it does not
send the close message to BSM.
Resolution:
An additional sleep with environment variable
OB2BMASLEEPBEFORECLOSE is introduced to allow BMA to
send close message successfully.
Change Request: H555010615
OmniBack II does not handle error messages properly.
Resolution:
When cleaning tape is loaded into drive with UMA
command, OmniBack II reports:
"move: Cleaning cartridge installed."
Change Request: H555010787
Binaries are not properly build.
Resolution:
Binaries are properly build.
Change Request: H555010789
Serial numbers for drives are not read properly.
Because of this, devbra does not know how to combine
drives together with robotics.
Resolution:
SCTL_ReadElementStatusSerial is rewritten so that it
supports SCSI-2 and SCSI-3 specifications.
Part of SSPUX410_076.
Change Request: H555010804
The failure of trailing filemark write is caused
by a hardware problem.The backup media agent error
handling in this very specific case is not adequate.
Resolution:
The media is marked as poor and BMA is aborted if the
backup fails on last FMwrite.
Change Request: H555010978
Device error notifications are not sent even when
device error occurs. Device error notification sending
is not implemented in OmniBack II A.04.10.
Resolution:
Device error notification sending is implemented in
OmniBack II A.04.10.
Change Request: H555010980
With patch PHSS_28745 user ID for accessing STK library
is changed. All ACS Media Agents now access to STK
library with unique user ID.
Resolution:
Unique user ID can be changed to logical drive name
with setting environment variable OB2USERID=1 in
.omnirc file.
Part of SSPUX410_081.
Change Request: H555011003
If option "Load Port" is used on ESL 9000 libraries
OmniBack can not load or unload the tape.
Resolution:
With new environment variables OB2MOUNTSLEEP and
OB2DISMOUNTSLEEP sleep in seconds before executing
load and unload command is added in .omnirc file.
Part of SSPUX410_080.
PHSS_28745:
Change Request: H555009054
In case that reconnect option is used for backup,
it is possible that Media Agent fails due to a
protocol error.
Resolution:
Protocol between Session Manager and Media Agent is
changed in order not to acknowledge normal formatted
messages.
Change Request: H555009430
Only device files of the format /dev/rmt/*mn are
filtered in devlist_ux.c.
Resolution:
New environment variable OB2BROWSEALLDEVICES is
introduced in ".omnirc" file. Possible values are
0 (default) and 1. If set to 1 the function will
also browse the /dev/rmt/*n device files.
Change Request: H555009630
The tape is unnecessarily checked for physical write
protection during Restore Session.
Resolution:
OmniBack II properly handles physically write protected
tapes.
Change Request: H555009873
SuperDLT is not supported.
Resolution:
SuperDLT is added as supported device in OmniBack II
DAS Media Agent.
Change Request: H555009914
TapeAlert functionality for detecting dirty drives is
disabled by default.
Resolution:
TapeAlert functionality for detecting dirty drives is
enabled by default.
Change Request: H555010030
Meta files are removed although there are still object
versions in the Omniback II Database with reference to
those meta files.
Resolution:
Meta files are no longer removed if there are object
versions in the Omniback II Database with references
to them.
Change Request: H555010150
Backup session on Linux Red Hat fails if IBM 3581 driver
is not installed.
Resolution:
In case that IBM 3581 driver is not installed on the
system, environment variable OB2NOIBM3581=1 must be
added in ".omnirc" file.
Change Request: H555010157
Entry for T9840 and T9940 devices is missing from device
table.
Resolution:
Devices T9840 and T9940 are added to the device table.
Change Request: H555010199
NDMP by default skips tape filemarks, but Celera
implements filemark read in NDMP protocol version 3
and filemarks are not skipped.
Resolution:
By setting variable OB2NDMPFMV4=1 in ".omnirc" file
OmniBack II properly handles filemark skip when
backup is appended.
Change Request: H555010214
Autoconfiguration of Bnchmark VS160, Compaq VS160,
HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
FastStor 2 Autoloader, HP SS1016 Artic Wolf Lib,
HP MSL6000 Series Lib, HP ESL9000 Series Lib,
SEAGATE DAT DAT 06241-xxx and Spectra-Logic Gator
libraries fails because they are not supported by
Data Protector.
Resolution:
New entries are added in "scsitab" file in order to
support Bnchmark VS160, Compaq VS160, HP 2Gen LTO,
Seagate DAT STDL42401LW drives and ADIC FastStor 2
Autoloader, HP SS1016 Artic Wolf Lib, HP MSL6000
Series Lib, HP ESL9000 Series Lib, SEAGATE DAT DAT
06241-xxx and Spectra-Logic Gator libraries.
Change Request: H555010277
omnimm -silo_query command returns invalid number of
media because every 1000th medium is counted twice.
Resolution:
Function returning the list and number of media
is changed.
Change Request: H555010317
If connection between BMA and UMA is broken during
the backup and no IPC error is reported, BMA terminates
session when it fails to instruct UMA to unload the
tape.
Resolution:
New instance of UMA is started.
Change Request: H555010332
All MA agents use logical drive names as user_id when
accessing a STK library. Library only accepts unique
user_id, so Omniback II MA should access it with a
unique user_id.
Resolution:
The user_id MA used to access the library has been
unified.
Change Request: H555010392
Tape statistics logging is not implemented in ACS
and DAS Media Agent.
Resolution:
Functionality is implemented.
Part of SSPUX410_072.
PHSS_28333:
Change Request: H555006826
If append fails during positioning, the tape is not
marked poor.
Resolution:
Error handling is improved.
Change Request: H555008826
Because of drive problems, Media Agent does not
position the tape to the right location.
Resolution:
The way Restore Media Agent finds the right position
on the tape has been changed. If you receive error
message:
"|Major|From RMA<host> "<device>" time:<time>
|90:184| Cannot forward block. |Details unknown.|"
then set new environment variable OB2NOBLOCKSEEK in
.omnirc file to 1 .
Change Request: H555008870
When started during the system startup, "ssi.sh"
script fails because environment variable PATH is
not set.
Resolution:
PATH is set in the "ssi.sh" script and works
correctly during the system startup.
Part of SSPUX410_045.
Change Request: H555009018
Tape I/O operation statistics functionality is not
implemented in OmniBack II.
Resolution:
Tape I/O operation statistics functionality was added.
To enable it, add the new environment variable
"OB2TAPESTATISTICS" to the ".omnirc" file and switch
it on (OB2TAPESTATISTICS=1).
Tape I/O operation statistics is then logged in
"/var/opt/omni/log/tapestatistics.log" file.
The statistics consist of:
1. Errors corrected without substantial delay
2. Errors corrected with possible delays
3. Total rewrites or rereads
4. Total errors corrected
5. Total times correction algorithm processed
6. Total bytes processed
7. Total uncorrected errors
Part of SSPUX410_049.
Change Request: H555009027
OmniBack II does not include 'show tape copy progress'
functionality.
Resolution:
This functionality is added. To enable it, add the
new environment variable "OB2COPYTAPEMSG=k"
in ".omnirc" file. OmniBack II then for every k-th
segment shows a message:
"|Normal| From: CMA-ACS<hostname> "<device>"
Time: <time>
Copying segment k"
Change Request: H555009078
The device autoconfiguration fails, because the drive
is not recognized.
Resolution:
Autoconfiguration "Product ID" string in scsitab file
is changed from "Mammoth2" to "MAMMOTH2".
Change Request: H555009095
OmniBack II does not properly handle mounted tapes.
Resolution:
Tapes in home position and mounted tapes are handled
the same way. They are both considered 'resident'.
Change Request: H555009101
In case that Media Agent host uses the old NIO SCSI
bus, OmniBack II is not able to get the capacity of
a mounted Magneto Optical (MO) medium.
Resolution:
Media Agent is improved to correctly get the
capacity of the MO medium.
Change Request: H555009139
Read/write of Cartridge Memory on LTO devices does not
work properly.
Resolution:
Media Agent is improved to work correctly with
Cartridge Memory on LTO devices.
Change Request: H555009315
In AIX SAN environment it is possible that a device
is not available for a couple of seconds due to other
activities in SAN environment. In such cases the
"write()" command fails with EBUSY error.
Resolution:
Retry is added in case of EBUSY error. Retry can be
configured with environment variables
OB2SPTRETRY (default 10 retries) and
OB2SPTSLEEP (default 10 seconds) in ".omnirc" file.
Part of SSPUX410_057.
Change Request: H555009407
OmniBack II is performing cleaning of DLT drives in
case that cleaning light is on. But in some cases
this light is still on even after drive is cleaned
and OmniBack II repeats cleaning cycle.
Resolution:
New environment variable, "OB2DLTCLEANINGLIGHTCHECK"
is added in ".omnirc" file. By default it is set to
"0" and cleaning is not performed when cleaning light
is on. If variable is set to "1", cleaning is performed.
Change Request: H555009859
OmniBack II is not designed to mark tape as occupied
when tape mounting fails with "STATUS_VOLUME_IN_DRIVE".
Resolution:
OmniBack II properly marks tape as "Poor" in case
when mount operation fails with ACS error:
"STATUS_VOLUME_IN_DRIVE".
Part of SSPUX410_058.
PHSS_27458:
Change Request: H555006734
When the devices automatically unloads, OmniBack II
tries to unload but fails since the device already
unloaded tape.
Resolution:
New environment variable OB2NOEJECTCLEANINGTAPE which
has to be set to 1 in omnirc file, was implemented in
order to prevent OmniBack II to unload the cleaning
tape.
Change Request: H555007993
Enabled "st_san_safe" parameter causes incorrect
system handling for the devices with "rewind on close"
implemented. This causes devbra to return unusable
devices.
Resolution:
devbra is adapted in order to work properly when
"st_san_safe" kernel parameter is enabled.
Change Request: H555008050
Media Agent on AIX platform does not handle End
of Medium correctly for LTO devices.
Resolution:
End of Medium handling is improved for LTO devices
on AIX platform.
Change Request: H555008179
New inquiry strings are needed for Compaq devices.
Resolution:
New inquiry strings are added for Compaq devices.
Change Request: H555008242
In case that NDMP backup contains large number of
files, Backup Media Agent uses large amount of memory.
Resolution:
Backup Media Agent memory usage is improved so it can
backup up to 5 million files.
Change Request: H555008328
Sometimes it is possible that eject operation fails
after the medium header verification.
Resolution:
Additional medium rewind operation is added before the
offline operation.
Change Request: H555008428
Auto configuration of Overland Data Neo Series
LXN2000 and Neo Series LXN4000with Quantum
SDLT220 tape drives does not work because of
inquiry strings missing.
Resolution:
Inquiry strings are added for auto configuration.
Change Request: H555008496
Message is implying that medium verification has been
done although only the medium header sanity check has
been performed.
Resolution:
Message is changed to:
"Medium header verification completed".
Part of SSPUX410_028.
Change Request: H555008504
When performing bulk eject media agent aborts session.
Resolution:
Ejecting tape from mailslot works properly.
Change Request: H555008634
If during the backup connection between BMA and UMA
is broken and no IPC error is reported, BMA terminates
when it fails to instruct UMA to unload the tape.
Resolution:
New instance of UMA is started.
Change Request: B555014660
Devbra and sanconf are limited to 10 character serial
numbers only. When there are devices with 12 digit
SN detected, devbra truncates the last two digits.
As a result, several physical devices are then treated
as one and the same device.
Resolution:
Devbra is using all digits of the device SN to
distinguish between devices.
Part of SSPUX410_040.
Change Request: H555008680
Reading and accessing the Cell Manager info resulted
in xma ending abnormally.
Resolution:
Source code for updating Cell Manager info has been
modified slightly.
Change Request: H555008555
Media Agent protocol is incorrect for the devices
with multi-host connection.
Resolution:
Media Agent protocol is improved for the devices using
multi-host connections.
Part of SSPUX41_031.
Change Request: H555008610
Solaris Media Agent is not capable of handling SCSI
sense information bigger than 144 bytes.
Problem typically occurs in combination with certain
types of SAN FC switches/drivers.
Resolution:
Buffer receiving SCSI sense information is increased.
Part of SSPUX410_035.
Change Request: H555008655
Media Agent is not able to write beyond 2GB limitation
on file devices.
Resolution:
The 2Gb limitation on file devices is increased.
Part of SSPUX410_037.
Change Request: H555008834
OmniBack II does not support FC devices on
AIX platform.
Resolution:
Support for FC devices on AIX platform is added.
Part of SSPUX410_038.
Change Request: H555008753
Ascii to Unicode conversions of large number of
filenames generate stack overflow while transferring
the catalog information.
Resolution:
Function for Ascii to Unicode conversion is replaced.
Part of SSPUX410_042.
Change Request: H555008728
In case that backup to direct access devices contains
large number of small files, it is possible that
catalog size is bigger than space available on medium.
Because of this backup fails to write complete catalog
to the medium.
Resolution:
Calculation of space needed for catalog is improved in
order not to exceed available space.
Change Request: H555008608
New values are returned by SN6000.
Resolution:
New returned values for SN6000 are supported.
Change Request: H555008747
OmniBack II does not work correctly with 9840 device
which product ID starts with "T9840".
Resolution:
Media Agent is improved in order to support 9840
devices which product ID starts with "T9840".
Change Request: 8606263710
Automatic cleaning does not work if library does not
have barcode support.
Resolution:
New OmniBack II environment variable is added:
OB2CLNSLOT. Variable has to be set on Media Agent host
and has to contain number of Cleaning slot configured
for the library.
PHSS_26357:
Change Request: H555007269
When split library in SAN environment is assigned to
2 systems and "omnimm -eject" is run on host B, host A
can no longer access the changer.
Resolution:
Library robotic mechanism is released after tape
eject.
Change Request: H555007381
Not all information is written to the debug.log after
I/O drive status error occurs.
Resolution:
Information is added to the debug.log file.
Change Request: H555007513
With OmniBack II A.04.00 release verification of DA
block part is introduced. In case that data length for
the data record is "0", verify reports an error.
Resolution:
Verify is changed in order to ignore "0" data length
for data record, because this does not influence data
restore.
Part of SSPUX410_016.
Change Request: H555007663
In case that STK 9940 drives are configured as T9840,
query does not work correctly because OB2 expects that
those drives are configured as type 3590.
Resolution:
Configuration for STK 9940 is changed in order to be
recognized as T9840 media type.
Change Request: H555007700
In case in which reconnect option is used for backup,
it is possible that Media Agent fails due to a protocol
error.
Resolution:
Protocol between Session Manager and Media Agent is
changed in order not to acknowledge normal formatted
messages.
Complete functionality of this fix will be available
when Cell Server patch PHSS_26353/PHSS_26354 is
installed - or successors of it.
Part of SSPUX410_017.
Change Request: H555007739
Header verification can not handle a dirty drive
situation.
Resolution:
If OmniBack II detects cleaning tape medium header is
not checked before unloading.
Change Request: H555007798
When loading a tape medium header check is run. If the
medium is foreign or blank OmniBack II aborts backup
session.
Resolution:
If loaded tape is foreign or blank OmniBack II does not
check medium header when closing device.
Change Request: B555013119
In order for Sony DTF device to work correctly,
"OB2DBD=1" entry has to be added to omnirc file.
Resolution:
Entry for Sony DTF drive is updated in order to make
the device work correctly without omnirc entry.
PHSS_26219:
Change Request: H555006666
Medium header verification is not implemeted.
Resolution:
Environment variable OB2DISABLEHEADERCHECK is
introduced.
Medium header is checked by default. Setting the
variable to 1 in /opt/omni/.omnirc file turns the
functionality off.
Change Request: H555006790
DAS Media Agent is checking incorrect environment
variable.
Resolution:
Setting environment variable OB2DASDRIVESTATUS2 to 1
in the /opt/omni/omnirc file makes usage of more than
15 drives possible.
Change Request: H555006798
Query operation hangs when performed on GRAU
libraries with more than 1000 tapes.
Resolution:
Query operation can handle more than 1000 tapes
within GRAU library.
Change Request: H555006885
LTO drives are not supported with Omniback ACS
integration.
Resolution:
Omniback ACS integration supports LTO drives.
Change Request: B555012905
NDMP Media Agent packages do not contain devbra.
Resolution:
devbra is added to NDMP Media Agent packages.
Change Request: H555006608
OmniBackII A.04.10 does not support HP VS80 and
Benchmark VS640 libraries.
Resolution:
OmniBackII A.04.10 supports HP VS80 and Benchmark VS640
libraries on HP-UX, Linux and Sun Solaris systems.
Part of SSPUX410_002.
Change Request: H555007051
In case that reconnect option is used and OB2PORTRANGE
environment variable is set, it is possible that
reconnect occurs at the beginning of the session
due to incorrectly set timeout.
Resolution:
Timeout is set to correct value.
SR:
H555011613 H555012361 H555012208 H555011999 H555012237
H555011284 H555011248 H555011185 H555011295 H555012177
H555012398 H555011697 H555010978 H555010789 H555010804
H555010615 H555010607 H555010980 H555011003 H555010400
H555010500 H555010787 H555010332 H555009873 H555010317
H555010157 H555010392 H555009430 H555010277 H555009054
H555009630 H555010199 H555010030 H555009914 H555010150
H555010214 H555009101 H555009859 H555009315 H555009018
H555009027 H555009407 H555009139 H555006826 H555008870
H555009095 H555008826 H555009078 H555008728 H555008179
H555008747 H555008496 H555007993 8606263710 B555014660
H555008050 H555008421 H555008610 H555008242 H555008504
H555006734 H555008328 H555008634 H555008608 H555008428
H555008662 H555008680 H555008834 H555008753 H555008555
H555008655 B555013119 H555007739 H555007700 H555007798
H555007513 H555007381 H555007663 H555007269 B555012905
H555006885 H555006608 H555007051 H555006798 H555006790
H555006666
Patch Files:
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
packet.Z
/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
packet.Z
/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
packet.Z
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
packet.Z
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
packet.Z
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
packet.Z
/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
A.04.10/packet.Z
what(1) Output:
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
packet.Z:
None
/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
A.04.10/packet.Z:
None
cksum(1) Output:
3094641178 2534343 /opt/omni/databases/vendor/ma/hp/s800/
hp-ux-1020/A.04.10/packet.Z
91847649 2535998 /opt/omni/databases/vendor/ma/hp/s800/
hp-ux-11/A.04.10/packet.Z
1632292559 2090431 /opt/omni/databases/vendor/ma/gpl/i386/
linux-60/A.04.10/packet.Z
1249677023 2163697 /opt/omni/databases/vendor/ma/ibm/rs6000/
aix-42/A.04.10/packet.Z
2874338070 1892464 /opt/omni/databases/vendor/ma/sco/i386/
sco_sv/A.04.10/packet.Z
3178890692 2101773 /opt/omni/databases/vendor/ma/sequent/
i386/dynix/A.04.10/packet.Z
1484648346 2432595 /opt/omni/databases/vendor/ma/siemens/
r400/sinix/A.04.10/packet.Z
2659036617 2429475 /opt/omni/databases/vendor/ma/sun/sparc/
solaris-26/A.04.10/packet.Z
2944622068 3101205 /opt/omni/databases/vendor/acs/hp/s800/
hp-ux-11/A.04.10/packet.Z
1498047965 3102329 /opt/omni/databases/vendor/acs/hp/s800/
hp-ux-1020/A.04.10/packet.Z
3291798518 3046135 /opt/omni/databases/vendor/acs/sun/sparc/
solaris-26/A.04.10/packet.Z
1646966207 2724717 /opt/omni/databases/vendor/acs/ibm/
rs6000/aix-42/A.04.10/packet.Z
582049678 2626828 /opt/omni/databases/vendor/das/hp/s800/
hp-ux-11/A.04.10/packet.Z
2675976398 2624818 /opt/omni/databases/vendor/das/hp/s800/
hp-ux-1020/A.04.10/packet.Z
2038326812 2577109 /opt/omni/databases/vendor/das/ibm/
rs6000/aix-42/A.04.10/packet.Z
4089387031 2989819 /opt/omni/databases/vendor/ndmp/hp/s800/
hp-ux-1020/A.04.10/packet.Z
4147353507 3007402 /opt/omni/databases/vendor/ndmp/hp/s800/
hp-ux-11/A.04.10/packet.Z
2965366813 2803295 /opt/omni/databases/vendor/ndmp/sun/
sparc/solaris-7/A.04.10/packet.Z
3797533921 2974903 /opt/omni/databases/vendor/fxma/hp/s800/
hp-ux-1020/A.04.10/packet.Z
3303832516 2975781 /opt/omni/databases/vendor/fxma/hp/s800/
hp-ux-11/A.04.10/packet.Z
1767308249 2771624 /opt/omni/databases/vendor/fxma/sun/
sparc/solaris-26/A.04.10/packet.Z
Patch Conflicts: None
Patch Dependencies: None
Hardware Dependencies: None
Other Dependencies:
If the Cell Server is running on HP-UX, then the
Cell Server patch PHSS_30128/PHSS_30129 (or later)
for HP-UX must be installed before this Media Agent
patch. If this is not done, the connection between
Media Agents and Cell Server will no longer work.
In a mixed environment, if the Cell Server is running
on Windows NT/2000, then Cell Server patch
OMNIBACK_00106 (or later) must be installed at the
same time.
PHSS_30128:
Cell Server (CS) packet patch,
Release Date: Available
Change Request: H555010787
Change Request: H555007700
Change Request: H555008242
Change Request: H555008680
Change Request: H555009054
Change Request: H555010030
PHSS_30128 is required for these defect fixes.
PHSS_30130:
Cell Console (CC) packet patch,
Release Date: Available
Change Request: B555014660
Change Request: H555009430
PHSS_30130 is required for these defect fixes.
Supersedes:
PHSS_26219 PHSS_26357 PHSS_27458 PHSS_28333 PHSS_28745 PHSS_29861
Equivalent Patches:
PHSS_30142:
s700: 11.00 11.11
s800: 11.00 11.11
Patch Package Size: 51020 KBytes
Installation Instructions:
Please review all instructions and the Hewlett-Packard
SupportLine User Guide or your Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitation of liability and warranties,
before installing this patch.
------------------------------------------------------------
1. Back up your system before installing a patch.
2. Login as root.
3. Copy the patch to the /tmp directory.
4. Move to the /tmp directory and unshar the patch:
cd /tmp
sh PHSS_30141
5a. For a standalone system, run swinstall to install the
patch:
swinstall -x autoreboot=true -x match_target=true \
-s /tmp/PHSS_30141.depot
By default swinstall will archive the original software in
/var/adm/sw/patch/PHSS_30141. If you do not wish to retain a
copy of the original software, you can create an empty file
named /var/adm/sw/patch/PATCH_NOSAVE.
WARNING: If this file exists when a patch is installed, the
patch cannot be deinstalled. Please be careful
when using this feature.
It is recommended that you move the PHSS_30141.text file to
/var/adm/sw/patch for future reference.
To put this patch on a magnetic tape and install from the
tape drive, use the command:
dd if=/tmp/PHSS_30141.depot of=/dev/rmt/0m bs=2k
Special Installation Instructions:
PHSS_30141:
NOTE!
This Patch has to be installed on the Installation
Server host.
The OB2 Media Agent must be redistributed to the Media
Agent client system(s) after the installation of the patch
in order to get the fixes into effect.
For distribution of the Media Agent, refer to the
OmniBackII Installation guide.
Patch includes the following Site Specific Patches:
SSPUX410_002
SSPUX410_016
SSPUX410_017
SSPUX410_028
SSPUX410_031
SSPUX410_035
SSPUX410_037
SSPUX410_038
SSPUX410_040
SSPUX410_042
SSPUX410_045
SSPUX410_049
SSPUX410_057
SSPUX410_058
SSPUX410_072
SSPUX410_076
SSPUX410_080
SSPUX410_081
A Site Specific Patch is a temporary hotfix that
you might have received from HP Support if you
have encountered a problem with Data Protector
for which no General Release patch was or is
available yet.
If any newer Site Specific Patch - that is
one with a higher number - for the Cell Console
is installed on your system, then you
must re-apply this SSP after installing
this Cell Console patch.
-----End of Document ID: PHSS_30141------------------------------------------
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]