"disable cardbus" is ineffective. You need to do "disable cbb". Can you
try this and let us know if it worked?

On Mon, 2 Apr 2001, Jan Johansson wrote:

> Hello,
>
> I hope that someone can help me resolve this hardware issue as I
> at a total lost when it comes to hardware.
>
> The 3Com (3C562D) works in the Toshiba without any problems but
> in the Dell I get a "can't allocate i/o space" message.
>
> Windows 98 on the Dell reports the card as using "Input/Output
> Range: 1000-100F" and "Interrupt Request: 3" and it works.
>
> I have tried boot -c and then "diable cardbus" and "disable
> pcibios" but no change I also updated the BIOS in the Dell. And
> have been thinking of flashing the card, though I doupt it would
> help.
>
> Dell is a Latitude CP M233ST
> Toshiba is a Satellite Pro 440CDX
>
> --begin /kern/msgbuf DELL--
>
> OpenBSD 2.8-current (RAMDISKC) #141: Sun Mar 25 23:41:04 MST 2001
> deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKC
> cpu0: F00F bug workaround installed
> cpu0: Intel Pentium/MMX (Tillamook) ("GenuineIntel" 586-class) 234 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem = 66629632 (65068K)
> avail mem = 58392576 (57024K)
> using 838 buffers containing 3432448 bytes (3352K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 02/14/01, BIOS32 rev. 0 0xffe90
> apm0 at bios0: Power Management spec V1.2
> pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev. 1.0 0xfb950/112 (5 entries)
> pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371 PCI-ISA and IDE" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xc000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01
> "Intel 82371AB PIIX4 ISA" rev 0x01 at pci0 dev 1 function 0 not configured
> pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHH2064AT>
> wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680 sectors
> pciide0: channel 0 interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1
> scsibus0 at atapiscsi0: 2 targets
> wdc_atapi_intr: warning: reading only 14 of 18 bytes
> wdc_atapi_intr: warning: reading only 14 of 36 bytes
> cd0 at scsibus0 targ 0 lun 0: <TORiSAN, CD-ROM CDR_U200, 1.09> SCSI0 5/cdrom removable
> pciide0: channel 1 interrupting at irq 15
> cd0(pciide0:1:0): using PIO mode 0, DMA mode 1
> "Intel 82371AB USB" rev 0x01 at pci0 dev 1 function 2 not configured
> "Intel 82371AB Power Management" rev 0x01 at pci0 dev 1 function 3 not configured
> vga1 at pci0 dev 2 function 0 "Neomagic Magicgraph NM2160" rev 0x00
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1131 PCI-CardBus" rev 0x01: irq 11
> cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1131 PCI-CardBus" rev 0x01: irq 11
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8, lattimer 0x20
> pcmcia1 at cardslot1
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask c840 netmask c840 ttymask c842
> rd0: fixed, 3560 blocks
> wd0: no disk label
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> ep1 at pcmcia0 function 0 "3Com Corporation, 3C562D/3C563D, EtherLink III": can't allocate i/o space
> pccom3 at pcmcia0 function 1 "3Com Corporation, 3C562D/3C563D, EtherLink III" port 0x22f8/8: ns16550a, 16 byte fifo
> OpenBSD 2.8 (RAMDISKC) #81: Mon Nov 6 11:29:16 MST 2000
> deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKC
> cpu0: F00F bug workaround installed
> cpu0: Intel Pentium/MMX (Tillamook) ("GenuineIntel" 586-class) 234 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem = 66629632 (65068K)
> avail mem = 57929728 (56572K)
> using 838 buffers containing 3432448 bytes (3352K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 02/14/01, BIOS32 rev. 0 0xffe90
> apm0 at bios0: Power Management spec V1.2
> pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
> pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfb950, size 112 bytes (5 entries)
> pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371 (Triton MX) PCI-ISA and IDE" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> pci_addr_fixup: 000:03:0 0x104c 0xac15 new address 0x04000000
> pci_addr_fixup: 000:03:1 0x104c 0xac15 new address 0x04001000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82439TX System (MTXC)" rev 0x01
> "Intel 82371AB PIIX4 ISA" rev 0x01 at pci0 dev 1 function 0 not configured
> pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHH2064AT>
> wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680 sectors
> pciide0: channel 0 interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
> atapiscsi0 at pciide0 channel 1
> scsibus0 at atapiscsi0: 2 targets
> wdc_atapi_intr: warning: reading only 14 of 18 bytes
> wdc_atapi_intr: warning: reading only 14 of 36 bytes
> cd0 at scsibus0 targ 0 lun 0: <TORiSAN, CD-ROM CDR_U200, 1.09> SCSI0 5/cdrom removable
> cd0: can use 32-bit, PIO mode 3, DMA mode 1
> pciide0: channel 1 interrupting at irq 15
> cd0(pciide0:1:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
> "Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 1 function 2 not configured
> "Intel 82371AB Power Management (PIIX4)" rev 0x01 at pci0 dev 1 function 3 not configured
> "Neomagic Magicgraph NM2160" rev 0x00 at pci0 dev 2 function 0 not configured
> cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1131 PCI-CardBus" rev 0x01
> cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1131 PCI-CardBus" rev 0x01
> cbb0: irq 11
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> cbb1: irq 11
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8, lattimer 0x20
> pcmcia1 at cardslot1
> isa0 at mainbus0
> isadma0 at isa0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask c840 netmask c840 ttymask c842
> rd0: fixed, 3560 blocks
> wd0: no disk label
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> ep1 at pcmcia0 function 0 "3Com Corporation, 3C562D/3C563D, EtherLink III": can't allocate i/o space
> pccom3 at pcmcia0 function 1 "3Com Corporation, 3C562D/3C563D, EtherLink III" port 0x22f8/8: ns16550a, 16 byte fifo
>
> --end /kern/msgbuf DELL--
>
> --begin /kern/msgbuf Toshiba--
>
> OpenBSD 2.8 (RAMDISKC) #81: Mon Nov 6 11:29:16 MST 2000
> deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKC
> cpu0: F00F bug workaround installed
> cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 133 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem = 33271808 (32492K)
> avail mem = 27000832 (26368K)
> using 431 buffers containing 1765376 bytes (1724K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(63) BIOS, date 11/26/98, BIOS32 rev. 0 0xfe95b
> apm0 at bios0: Power Management spec V1.2
> pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
> pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xf97e0, size 80 bytes (3 entries)
> pcibios0: PCI Interrupt Router at 000:01:0 ("Toshiba(2) PCI-ISA" rev 0x00)
> pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #0 is the last bus
> WARNING: can't reserve area for I/O APIC.
> WARNING: can't reserve area for Local APIC.
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Toshiba(2) Host-PCI" rev 0x27
> "Chips and Technologies 65554" rev 0xc2 at pci0 dev 4 function 0 not configured
> "NEC USB" rev 0x01 at pci0 dev 11 function 0 not configured
> isa0 at mainbus0
> isadma0 at isa0
> wdc0 at isa0 port 0x1f0/8 irq 14
> wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1403MAV>
> wd0: can use 16-bit, PIO mode 4
> wd0: 16-sector PIO, LBA, 1376MB, 2796 cyl, 16 head, 63 sec, 2818368 sectors
> wdc1 at isa0 port 0x170/8 irq 15
> atapiscsi0 at wdc1 channel 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1502BN, 1001> SCSI0 5/cdrom removable
> cd0: can use 16-bit, PIO mode 3
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
> pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
> pcmcia0 at pcic0 controller 0 socket 0
> pcmcia1 at pcic0 controller 0 socket 1
> ep1 at pcmcia1 function 0 "3Com Corporation, 3C562D/3C563D, EtherLink III" port 0x340/16 irq 3: address 00:60:97:f8:a5:8c, utp/aui/bnc (default utp)
> pccom3 at pcmcia1 function 1 "3Com Corporation, 3C562D/3C563D, EtherLink III" port 0x2f8/8 irq 9<3>stray interrupt 3
> : ns16550a, 16 byte fifo
> pcic0: irq 3, polling enabled
> biomask c040 netmask c040 ttymask c24a
> rd0: fixed, 3560 blocks
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
>
> --end /kern/msgbuf Toshiba--
>
>

---
Aaron Campbell (aaronmonkey.org || aaronopenbsd.org)
http://www.monkey.org/~aaron

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]