On Tue, 10 Apr 2001, Felix Kronlage wrote:

> |wd0a: DMA error reading fsbn 435360 of 435360-435391 (wd0 bn 435423; cn 431 tn 15 sn 30),
> |retrying
> |wd0: soft error (corrected)
> |wd1a: DMA error reading fsbn 16 of 16-31 (wd1 bn 79; cn 0 tn 1 sn 16), retrying
> |wd1a: DMA error reading fsbn 16 of 16-31 (wd1 bn 79; cn 0 tn 1 sn 16), retrying
> |wd1a: DMA error reading fsbn 16 of 16-31 (wd1 bn 79; cn 0 tn 1 sn 16), retrying
> |wd1: transfer error, downgrading to Ultra-DMA mode 1
> |wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 1

I get the following msgs with -current and softupdates, with new fsck_ffs,
mount_ffs, and tunefs binaries:

wd0a: aborted command, interface CRC error writing fsbn 544 of 544-549
(wd0 bn607; cn 0 tn 9 sn 40), retrying
wd0a: aborted command, interface CRC error writing fsbn 544 of 544-549
(wd0 bn607; cn 0 tn 9 sn 40), retrying
wd0a: aborted command, interface CRC error writing fsbn 544 of 544-549
(wd0 bn607; cn 0 tn 9 sn 40), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
wd0a: aborted command, interface CRC error writing fsbn 544 of 544-549
(wd0 bn607; cn 0 tn 9 sn 40), retrying
wd0: soft error (corrected)

As you can see, it downgrades to Ultra-DMA mode 1 for me, too. But the
drives continue to work fine (and are very fast in fact). This is a new
1.2GHz Athlon system with an Abit K7TA-RAID motherboard. I am using the
80wire/40pin ribbon cable that it came with to connect the hard drive
(which is a new Western Digital 7200RPM UDMA100 20GB drive).

---
Aaron Campbell (aaronmonkey.org || aaronopenbsd.org)
http://www.monkey.org/~aaron

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]