On Tue, Apr 17, 2001 at 03:26:13PM -0700, Louis Hopcraft wrote:
> Hello All.
>
> I have a PIII 660 with a ATA 100 pci (promise card) with 4 40GB drives
> connected to both ide channels on the promise card, and One 10GB drive
> connected to the primary IDE channel on the mother board. The BIOS on
> the PC shows the primary IDE master as the 10GB drive (which is what I
> want to happen) and nothing else show's here. Once I boot with the OBSD
> boot disk, it show's all five of the drive's wd0,wd1,wd2,wd3 and wd4
> (which turns out to be the 10GB drive).
>
> What I want to do here is make wd4 the bootdisk, but when I choose this
> I get the following error.
> disklabel /dev/rwd4: No such file or directory. I took a look at the
> /dev directory on the floopy and notices that there is no wd4*(a-p),
> only wd0-wd3? Does this mean that I'm out of luck with having five
> drives? Sorry about the long post, but does anyone have any ideas?

edit /dev/MAKEDEV (search for 'wd3') add wd4 and wd5 and
run '/dev/MAKEDEV all'

-- 
Exit! Stage Left!

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]