redirects need to be placed before mappings!!!

try that and post again if no luck! ;-)

Dean Carey
PGP public key available upon request.

-----Original Message-----
From: Will Macdonald [mailto:wfmmacscan.co.uk]
Sent: Tuesday, May 01, 2001 11:20 AM
To: miscopenbsd.org
Subject: simple IPF and IPNAT but problem between chair and keyboard

I installed the 2.9 snapshot on a machine yesterday, and configures using
the same rules I had applied to a 2.8 machine recently, and am having
serious problems use rdr to send SMTP/www traffice to a machine on internal
network.

I have simplified the rules as much as possible, but no joy. I've also read
through www.obfuscation.org/ipf without any luck.

Can someone see what is wrong ?? I have modified the file sysctl.conf and
rc.conf accordingly. All traffic behind the NAT machine works OK, but when I
try to telnet to port 25 from outside i get no response.

In the ipnat.rules file I tried having the map rules after the rdr rules,
but no luck either way.
/etc/ipnat.rules
map ep0 10.1.1.7/24 -> 123.123.123.123/32 portmap tcp/udp 1025:65000
map ep0 10.1.1.7/24 -> 123.123.123.123/32

#map ppp0 10.0.0.0/8 -> ppp0/32 portmap tcp/udp 10000:20000
rdr ep0 123.123.123.123/32 port 25 -> 10.1.1.1 port 25
rdr ep0 123.123.123.123/32 port 80 -> 10.1.1.1 port 80
rdr ep0 123.123.123.123/32 port 110 -> 10.1.1.1 port 110
rdr ep0 123.123.123.123/32 port 143 -> 10.1.1.1 port 143
rdr ep0 123.123.123.123/32 port 993 -> 10.1.1.1 port 993

/etc/ipf.rules
pass in from any to any
pass out from any to any

pass in quick on ep0 proto tcp from any to 123.123.123.123/32 port = 25 keep
state
pass in quick on ep0 proto tcp from any to 123.123.123.123/32 port = 80 keep
state
pass in quick on ep0 proto tcp from any to 123.123.123.123/32 port = 143
keep state
pass out quick on ep0 proto tcp from any to any keep state

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]