On Sunday, 3 March 2002 at 21:35:41 -0500, Josh Ziering wrote:
> On Sunday, March 03, 2002 7:59 PM, Todd C. Miller <Todd.Millercourtesan.com> wrote:
>
>> This is almost certainly firmware version specific. On OpenBSD the
>> firmware rev. is listed in the kernel bootup message. I have no
>> idea what FreeBSD does. The OpenBSD wicontrol also prints this
>> info but I don't think FreeBSD's does.
>>
>> Anyway, I do this for an IBSS master:
>> wicontrol wi0 -p 0 -c 1 -n 'My BSSID' -q 'My BSSID'
>> And for a client:
>> wicontrol wi0 -p 0 -n 'My BSSID'
>>
>> That is using Lucent firmware 8.10. I have also done this with
>> Prism2 cards using firmware 0.8.3. If you are using a Lucent card
>> where '-p 0' doesn't work, '-p 1' should work instead unless your
>> firmware is < 6.16 in which case it does not support IBSS. If you
>> are using Prism2 firmware < 0.8.2 IBSS probably doesn't work.
>>
>> - todd
>>
>
> Hmm, Still nothing. I used the command set that Todd gave, and it seems I
> still can't ping my clients. My wicontrol output is:
>
> NIC serial number: [ 99SA01000000 ]
> Station name: [ WaveLAN/IEEE node ]
> SSID for IBSS creation: [ Josh's Network ]
> Current netname (SSID): [ Josh's Network ]
> Desired netname (SSID): [ Josh's Network ]
> Current BSSID: [ 02:05:ea:19:43:04 ]

This shows a different MAC address for the IBSS.
 
> Channel list: [ 2047 ]
> IBSS channel: [ 11 ]
> Current channel: [ 11 ]
> Comms quality/signal/noise: [ 58 99 3 ]

And I haven't seen any valid comms quality display when running IBSS
mode, though this may be due to different firmware.

> Promiscuous mode: [ Off ]
> Port type (1=BSS, 3=ad-hoc): [ 0 ]
> MAC address: [ 00:05:5d:d7:0c:35 ]
> TX rate (selection): [ 3 ]
> TX rate (actual speed): [ 11 ]
> Maximum data length: [ 2304 ]
> RTS/CTS handshake threshold: [ 2347 ]
> Create IBSS: [ On ]
> Microwave oven robustness: [ 249 3577 3602 ]
> Roaming mode(1:firm,3:disable): [ 1 ]
> Access point density: [ 1 ]
> Power Mgmt (1=on, 0=off): [ 0 ]
> Max sleep time: [ 100 ]
> Card info: [ PRISM 2.5 ISL3873, Firmware 1.3
> variant 5
> WEP encryption: [ Off ]
> Authentication type
> (1=OpenSys, 2=Shared Key): [ 1 ]
> TX encryption key: [ 1 ]
> Encryption keys: [ ][ ][ ][ ]

On Sunday, 3 March 2002 at 19:41:05 -0700, Todd C. Miller wrote:
> In message <036201c1c325$4739a150$0400a8c0Lapadapolis>
> so spake Josh Ziering (whoredware):
>
>> wi0 at pci0 dev 10 function 0 "Global Sun GL24110P02" rev 0x02: irq 12
>> wi0: "D, Link DWL-650 11Mbps WLAN Card, Version 01.02"
>> wi0: PRISM 2.5 ISL3873, Firmware 1.3 variant 5, address 00:05:5d:d7:0c:35
>>
>> Isn't 1.3 a really high firmware number?
>
> That's a Prism 2.5 card, they use different firmware than Prism 2.
> I don't have a Prism 2.5 card so I've never tested '-p 0' on one.
> However, your wicontrol output looks good if you are trying to be
> an IBSS master--have you verified that your clients are using the
> same channel?

It would be interesting to see the result of a '-p 1' under these
circumstances. Also, it's correct that you're not using a base
station, right? Otherwise you shouldn't be trying IBSS mode.

Greg

--
Finger groglemis.com for PGP public key
See complete headers for address and phone numbers

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]