I can't seem to find the black magic to get an interrupt assigned
to the pci adapters for my orinoco silver cards. The exact error
message is:

cbb0 at pci0 dev 6 function 0 "Texas Instruments PCI1410 PCI-CardBus"
rev 0x01pci_intr_map: no mapping for pin A

cbb1 at pci0 dev 7 function 0 "Texas Instruments PCI1410 PCI-CardBus"
rev 0x01pci_intr_map: no mapping for pin A

I've tried changing the pcibios flags to 0x0008, and 0x0010. No luck.
My dmesg from the kernel with 0x0010 set is below.

I'm not sure what else to try.. any suggestions?

Thanks,
Jolan

OpenBSD 3.1-beta (NORM) #0: Mon Apr 1 20:14:02 CST 2002
    jolannorm:/usr/src/sys/arch/i386/compile/NORM
cpu0: AMD Athlon Model 6 (Palomino) ("AuthenticAMD" 686-class) 1.34 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem = 536391680 (523820K)
avail mem = 491548672 (480028K)
using 5689 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/26/01, BIOS32 rev. 0
0xfdaf0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
pcibios0: config mechanism [1][x], special cycles [x][x], last bus 1
pcibios0: PCI IRQ Routing Table rev. 1.0 0xf7510/192 (10 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3074
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI bridge 2: primary 0, secondary 3, subordinate 3
pcibios0: PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
  device vendor product
  register space address size
--------------------------------------------
000:00:0 1106:3099
        10h mem 0xe0000000 0x04000000
                [OK]
000:01:0 1106:b099
                [OK]
000:05:0 1102:0002
        10h port 0x0000e800 0x00000020
                [OK]
000:05:1 1102:7002
        10h port 0x0000ec00 0x00000008
                [OK]
000:06:0 104c:ac50
        10h mem 0x00000000 0x00001000
                [NG]
000:07:0 104c:ac50
        10h mem 0x00000000 0x00001000
                [NG]
000:08:0 8086:1229
        10h mem 0xdffff000 0x00001000
        14h port 0x0000e400 0x00000040
        18h mem 0xdfe00000 0x00100000
                [OK]
000:09:0 8086:1229
        10h mem 0xdfffe000 0x00001000
        14h port 0x0000e000 0x00000040
        18h mem 0xdfc00000 0x00100000
                [OK]
000:17:0 1106:3074
                [OK]
000:17:1 1106:0571
        20h port 0x0000fc00 0x00000010
                [OK]
001:00:0 10de:0110
        10h mem 0xde000000 0x01000000
        14h mem 0xd0000000 0x08000000
                [OK]
--------------------------[ 2 devices bogus]
 Physical memory end: 0x1ffee000
 PCI memory mapped I/O space start: 0x20000000
[PCIBIOS fixup stage]-----------------------
  device vendor product
  register space address size
--------------------------------------------
000:00:0 1106:3099
        10h mem 0xe0000000 0x04000000
                [OK]
000:01:0 1106:b099
                [OK]
000:05:0 1102:0002
        10h port 0x0000e800 0x00000020
                [OK]
000:05:1 1102:7002
        10h port 0x0000ec00 0x00000008
                [OK]
000:06:0 104c:ac50
        10h mem 0x20000000 0x00001000
                [OK]
000:07:0 104c:ac50
        10h mem 0x20001000 0x00001000
                [OK]
000:08:0 8086:1229
        10h mem 0xdffff000 0x00001000
        14h port 0x0000e400 0x00000040
        18h mem 0xdfe00000 0x00100000
                [OK]
000:09:0 8086:1229
        10h mem 0xdfffe000 0x00001000
        14h port 0x0000e000 0x00000040
        18h mem 0xdfc00000 0x00100000
                [OK]
000:17:0 1106:3074
                [OK]
000:17:1 1106:0571
        20h port 0x0000fc00 0x00000010
                [OK]
001:00:0 10de:0110
        10h mem 0xde000000 0x01000000
        14h mem 0xd0000000 0x08000000
                [OK]
--------------------------[ 0 devices bogus]
bios0: ROM list: 0xc0000/0xc800 0xcc800/0x1000 0xcd800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
emu0 at pci0 dev 5 function 0 "Creative Labs SoundBlaster Live" rev
0x07: irq 11
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Live Digital Input" rev 0x07 at pci0 dev 5
function 1 not configured
cbb0 at pci0 dev 6 function 0 "Texas Instruments PCI1410 PCI-CardBus"
rev 0x01pci_intr_map: no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 7 function 0 "Texas Instruments PCI1410 PCI-CardBus"
rev 0x01pci_intr_map: no mapping for pin A
: couldn't map interrupt
fxp0 at pci0 dev 8 function 0 "Intel 82557" rev 0x08: irq 10, address
00:90:27:c2:01:4d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci0 dev 9 function 0 "Intel 82557" rev 0x08: irq 11, address
00:90:27:44:26:85
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
pcib0 at pci0 dev 17 function 0 "VIA VT8366 PCI-ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 5T030H3>
wd0: 16-sector PIO, LBA, 29311MB, 16383 cyl, 16 head, 63 sec, 60030432
sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 54098H6>
wd1: 16-sector PIO, LBA, 39083MB, 16383 cyl, 16 head, 63 sec, 80043264
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
atapiscsi0(pciide0:1:0): using PIO mode 3, DMA mode 1
cd0 at scsibus0 targ 0 lun 0: <HITACHI, DVD-ROM GD-5000, 0213> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 3, DMA mode 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask cc40 ttymask dcc2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]