I have a problem in obsd3 network.

I have this. rl0 is working fine!

EurecaBoX# ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33224
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
lo1: flags=8008<LOOPBACK,MULTICAST> mtu 33224
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        media: Ethernet autoselect (100baseTX)
        status: active
        inet 200.198.aaa.bbb netmask 0xfffffff8 broadcast 200.198.aaa.bbbc
        inet6 fe80::2e0:7dff:fe81:478b%rl0 prefixlen 64 scopeid 0x1
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        media: Ethernet autoselect (none)
        status: no carrier
        inet6 fe80::2e0:7dff:fe81:4791%rl1 prefixlen 64 scopeid 0x2
        inet 192.168.0.20 netmask 0xffffff00 broadcast 192.168.0.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33224
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=10<POINTOPOINT> mtu 3000
tun1: flags=10<POINTOPOINT> mtu 3000
enc0: flags=0<> mtu 1536
bridge0: flags=0<> mtu 1500
bridge1: flags=0<> mtu 1500
vlan0: flags=0<> mtu 1500
vlan1: flags=0<> mtu 1500
gre0: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

urecaBoX# route show
Routing tables

Internet:
Destination Gateway Flags
default 200.198.aaa.ade UG
127.0.0.0 localhost.terra.co UG
localhost.terra. localhost.terra.co UH
192.168.0.0 link#1 U
200.198.aaa.add link#1 U
200.198.aaa.ade 0:d0:9:fc:46:c4 UH
EurecaBoX localhost.terra.co UGH
BASE-ADDRESS.MCA localhost.terra.co U

Internet6:
Destination Gateway Flags
default ::1 UG
default ::1 UG
::1 ::1 UH
::127.0.0.0 ::1 UG
::224.0.0.0 ::1 UG
::255.0.0.0 ::1 UG
::ffff:0.0.0.0 ::1 UG
2002:: ::1 UG
2002:7f00:: ::1 UG
2002:e000:: ::1 UG
2002:ff00:: ::1 UG
fe80:: ::1 UG
fe80::%rl0 link#1 U
fe80::%rl1 link#2 U
fe80::%lo0 fe80::1%lo0 U
fec0:: ::1 UG
ff01:: ::1 U
ff02::%rl0 link#1 U
ff02::%rl1 link#2 U
ff02::%lo0 fe80::1%lo0 U
EurecaBoX#

If i try to ping rl1 i got error:
EurecaBoX# ping 192.168.0.20
PING 192.168.0.20 (192.168.0.20): 56 data bytes
ping: sendto: Host is down
ping: wrote 192.168.0.20 64 chars, ret=-1

I have to set a special route to link#2? How i set it?

Thanks

Ricardo Augusto de Souza
Network Admin.
Information Management
ricardoinfom.com.br
(55) 11-3253-6303

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]