Since upgrading to the April 11 snapshot, my CD drives have been behaving
badly. Whenever I try to mount one, or rip audio music from one, I get lots
of messages akin to the ones I get just before the dmesg finishes. I wasn't
sure what details you needed, so I attached a dmesg. If you need anything
else, i'll be happy to send.
Thanks in advance.

# DMESG
OpenBSD 3.1 (GENERIC) #52: Thu Apr 11 20:39:36 MDT 2002
    deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 6 (Palomino) ("AuthenticAMD" 686-class) 1.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem = 267956224 (261676K)
avail mem = 242667520 (236980K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/04/01, BIOS32 rev. 0 0xfdaf0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 0xf7d60/192 (10 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3074
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xbc00
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
emu0 at pci0 dev 9 function 0 "Creative Labs SoundBlaster Live" rev 0x07: irq
11
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Live Digital Input" rev 0x07 at pci0 dev 9
function 1 not configured
pcib0 at pci0 dev 17 function 0 "VIA VT8366 PCI-ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 16383 cyl, 16 head, 63 sec, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-24102B, 5S54> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <SONY, DVD-ROM DDU1621, S1.6> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c040 ttymask d0c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ppp0: IPv6 not supported
ppp0: IPv6 not supported
cd0(pciide0:1:0): timeout
        type: atapi

        c_bcount: 804
        c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x60
cd0(pciide0:1:0): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
cd0: transfer error, downgrading to Ultra-DMA mode 1
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 1
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:0): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
cd0: transfer error, downgrading to Ultra-DMA mode 0
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 0
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:0): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
cd0: transfer error, downgrading to DMA mode 2
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:0): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x61
cd0: transfer error, downgrading to PIO mode 4
cd0(pciide0:1:0): using PIO mode 4
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
cd0(atapiscsi0:0:0): Check Condition on opcode 0x28
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Mode For This Track
cd1(pciide0:1:1): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:1: bus-master DMA error: missing interrupt, status=0x40
cd1(pciide0:1:1): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:1: bus-master DMA error: missing interrupt, status=0x41
cd1: transfer error, downgrading to Ultra-DMA mode 1
cd0(pciide0:1:0): using PIO mode 4
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 1
cd1(pciide0:1:1): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:1: bus-master DMA error: missing interrupt, status=0x41
cd1: transfer error, downgrading to Ultra-DMA mode 0
cd0(pciide0:1:0): using PIO mode 4
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 0
cd1(pciide0:1:1): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:1: bus-master DMA error: missing interrupt, status=0x41
cd1: transfer error, downgrading to DMA mode 2
cd0(pciide0:1:0): using PIO mode 4
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): timeout
        type: atapi
        c_bcount: 804
        c_skip: 0
pciide0:1:1: bus-master DMA error: missing interrupt, status=0x41
cd1: transfer error, downgrading to PIO mode 4
cd0(pciide0:1:0): using PIO mode 4
cd1(pciide0:1:1): using PIO mode 4
cd1(atapiscsi1:0:0): Check Condition on opcode 0x28
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Mode For This Track
# END

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]