To answer my own question, here's the dmesg from one of these things:

OpenBSD 3.1-current (GENERIC) #1: Tue Apr 30 10:25:14 JST 2002
    rootstorage:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C3 Samuel 2 ("CentaurHauls" 686-class) 533 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX,3DNOW
real mem = 528003072 (515628K)
avail mem = 483725312 (472388K)
using 5689 buffers containing 26501120 bytes (25880K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(30) BIOS, date 03/18/02, BIOS32 rev. 0 0xfb370
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 0xf0000/0xdce4
pcibios0: PCI IRQ Routing Table rev. 1.0 0xfdc70/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x9800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8601 Host-PCI" rev 0x05
ppb0 at pci0 dev 1 function 0 "VIA VT82C601 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade i1" rev 0x6a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 17 function 0 vendor "VIA", unknown product 0x8231 rev 0x10
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DJNA-371350>
wd0: 16-sector PIO, LBA, 12949MB, 16383 cyl, 16 head, 63 sec, 26520480 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1e: irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x1e: irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vendor "VIA", unknown product 0x8235 (class bridge, subclass miscellaneous, rev 0x10) at pci0 dev 17 function 4 not configured
auvia0 at pci0 dev 17 function 5 "VIA VT82C686 AC97 Audio" rev 0x40: irq 10
ac97: codec id 0x56494161
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Unknown 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x51: irq 11 address 00:40:63:c0:2a:ee
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004040, model 0x0000, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask 5000 netmask 5800 ttymask 5882
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

  It's a nice board. Just add SDRAM and a disk - everything else is
already there. Two IDE channels. No floppy connector. Ob-board video has
svideo (mini-din) and RCA output. No Fans. I understand there is also a
model with a disk-on-chip added - this dmesg is from the model without
this.

Regards,

Jonathon

On Sun, 28 Apr 2002, openbsd at zenbu.com wrote:
>
> Has anyone any experience of running OpenBSD on a VIA Eden board ?
>
> http://www.via.com.tw/en/Products/eden.jsp
>
> They look quite nice, but I thought I should check before
> experimenting with cash.
>
> They are not mentioned on http://www.openbsd.org/i386.html . Didn't
> see any mention searching the archives.
>
> Regards,
>
> Jonathon
>
>

-- 
  Jonathon Fletcher

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]