Hello all,
 
I'm getting desperate here.
First of all, I'm a total newbie with OpenBSD. I've setup a P2/300
machine with 2 NICs at act as a firewall/NAT. The first NIC is connected
to my cable modem and receives its IP address, netmask, gateway and DNS
servers via DHCP. That connection is working good. I can surf with Lynx,
ssh to a remote host, ftp ... it's basically working fine.
 
The other NIC is connected to a 10Mbit hub in my private network
192.168.0.0/24. BSD is running dhcpd, sshd and inetd. The client
computer running WinXP receives an IP address, netmask, gateway (the BSD
box) and DNS servers just fine. The connection from the Windows machine
to BSD box work great. I can ssh, sftp etc. just fine.
 
I've enabled packet filtering in rc.conf, IP forwarding in sysctl.conf.
I have "pass in all, pass out all" in pf.conf (for testing and
troubleshooting)
nat.conf contains "nat on tl1 from 192.168.0.0/24 to any -> tl1", where
tl1 is the interface connected to the cable modem.
 
But basically the only thing that works through the BSD box is ping! And
name resolution. Everything else is horribly slow! it can take a minute
before a single character is printed on screen when shh'ing to a remote
host. Surfing with IE is slow too. It connects to a site really fast but
when it should start to download stuff everything comes to a halt.
Outlook times out when trying to fetch my mail. What could be the
problem?!?!? Please, if anyone have any ideas ...
 
hostname.tl0:
inet 192.168.0.1 255.255.255.0 NONE media 10baseT
 
hostname.tl1:
dhcp NONE NONE NONE media 10baseT
 
dmesg:
OpenBSD 3.0 (GENERIC) #94: Thu Oct 18 14:48:27 MDT 2001
 
<mailto:deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC>
deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Klamath) ("GenuineIntel" 686-class, 512KB L2
cache) 300 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,MMX
real mem = 16363520 (15980K)
avail mem = 9912320 (9680K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b6) BIOS, date 07/04/98
apm0 at bios0apm0: APM power management enable: power management
disabled (1)
: Power Management spec V1.1 (BIOS mgmt disabled)
apm0: AC on, battery charge unknown
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks PCIHB5" rev 0x00
vga1 at pci0 dev 4 function 0 "Matrox MGA Millennium II 2164W" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
tl0 at pci0 dev 5 function 0 "Compaq Netelligent 10/100 TX" rev 0x10:
irq 9 address 00:08:c7:24:d2:aa
nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
ukphy0: OUI 0x100014, model 0x0001, rev. 5
pcib0 at pci0 dev 15 function 0 "Compaq PCI-ISA" rev 0x0c
pciide0 at pci0 dev 15 function 1 "Compaq Netelligent IDE" rev 0x0a: DMA
(unsupported), channel 0 configured to compatibility, channel 1
configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-5850, ZD16> SCSI0
5/cdrom removable
pciide0: channel 1 ignored (not responding; disabled or no drives?)
pchb1 at pci0 dev 17 function 0 "ServerWorks PCIHB5" rev 0x00
pci1 at pchb1 bus 1
ohci0 at pci1 dev 10 function 0 "Compaq USB OpenHost" rev 0x05: irq 11,
OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
tl1 at pci1 dev 11 function 0 "Compaq Netelligent 10/100 TX" rev 0x10:
irq 10 address 00:80:5f:9b:38:16
nsphy1 at tl1 phy 1: DP83840 10/100 media interface, rev. 1
ukphy1 at tl1 phy 31: Generic IEEE 802.3u media interface
ukphy1: OUI 0x100014, model 0x0001, rev. 6
siop0 at pci1 dev 12 function 0 "Symbios Logic 53c875" rev 0x04: irq 7,
has RAM
siop0: scsi bus reset
scsibus1 at siop0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <COMPAQ, ST34371W, 0682> SCSI2 0/direct
fixed
siop0: target 0 now using tagged 16 bit 20 MHz 15 REQ/ACK offset xfers
sd0: 4094MB, 5172 cyl, 10 head, 162 sec, 512 bytes/sec, 8386000 sec
total
sd1 at scsibus1 targ 1 lun 0: <COMPAQ, ST34371W, 0388> SCSI2 0/direct
fixed
siop0: target 1 now using tagged 16 bit 10 MHz 15 REQ/ACK offset xfers
sd1: 4094MB, 5172 cyl, 10 head, 162 sec, 512 bytes/sec, 8386000 sec
total
sd2 at scsibus1 targ 2 lun 0: <COMPAQ, ST34572W, 0892> SCSI2 0/direct
fixed
siop0: target 2 now using tagged 16 bit 20 MHz 15 REQ/ACK offset xfers
sd2: 4094MB, 6300 cyl, 8 head, 166 sec, 512 bytes/sec, 8386000 sec total
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
"ESS ES1868 Plug and Play AudioD, ESS0000, , " at isapnp0 port 0x800/8
not configured
ess0 at isapnp0 "ESS ES1868 Plug and Play AudioD, ESS1868, , " port
0x220/16,0x388/4,0x330/2 irq 5 drq 1,0: ESS Technology ES1868 [version
0x688b]
ess0: audio1 interrupting at irq 5
audio0 at ess0
opl0 at ess0: model OPL3
midi1 at opl0: <ESS Yamaha OPL3>
biomask 48c0 netmask 4ec0 ttymask 5ec2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 matched BIOS disk 81
dkcsum: sd2 matched BIOS disk 82
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]