Hi,

We received a server preinstalled with OBSD 3.0 beta (this was before 3.0
was released). The box had network problems and would not send anything on
the network (arp replies, ip, etc.), but using tcpdump, it could see the
traffic from other hosts on the ethernet.

We thought it could be a bug in 3.0b, so we tried 2.9, but got the same
results. We requested a new motherboard, but with the new one, we have the
same problem (can receive but not send).

We tried with 3.0 from the CD, then 3.0-stable, then 3.1 snapshot and
nothing worked. We installed Windows 2000 server and the drivers that
shipped with the CD and the interface worked fine!

Here is a dmesg from the 3.0 CD install with the original generic kernel.
Any help would be greatly appreciated.

OpenBSD 3.0 (GENERIC) #94: Thu Oct 18 14:48:27 MDT 2001
    deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron ("AuthenticAMD" 686-class) 697 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 251244544 (245356K)
avail mem = 227430400 (222100K)
using 3092 buffers containing 12664832 bytes (12368K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/13/01, BIOS32 rev. 0 0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 0xf8350/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "SIS", unknown product 0x730 rev 0x02
pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD200EB-00CSF0>
wd0: 16-sector PIO, LBA, 19092MB, 16383 cyl, 16 head, 63 sec, 39102336
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 52X L, 31> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x00
sis0 at pci0 dev 1 function 1 "SIS 900 10/100BaseTX" rev 0x82: irq 3 address
02:29:02:50:80:00
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
ohci0 at pci0 dev 1 function 2 "SIS 5597/5598 USB" rev 0x07: irq 5, OHCI
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 1 function 3 "SIS 5597/5598 USB" rev 0x07: irq 5, OHCI
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vendor "SIS", unknown product 0x7018 (class multimedia, subclass audio, rev
0x02) at pci0 dev 1 function 4 not configured
ppb0 at pci0 dev 2 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6300" rev 0x31
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c060 netmask c068 ttymask d0ea
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]