From: Okan Demirmen (odemirmenkhaoz.org)
Date: Thu May 01 2003 - 17:16:10 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

looks like you are trying to boot a.out /bsd with an elf boot

try a 3.3-release bootdisk.

ATTR:Eric (eric-list-openbsdcatastrophe.net) wrote concerning IBM eServer x305 Multi-disk Boot Problem (3.3-release), on [03.05.01 17:33]:
> I have an IBM eServer x305 with two IDE disks in it. In a post I
> made a week or so ago, I mentioned that this machine would return
>
> "Using Drive: 0 Partition: 3"
>
> So, as per FAQ 14.6, I did the following...
>
> 1. Booted to single user mode from the CD
> 2. Mounted /dev/wd0a as /mnt/root
> 3. fdisk -i -f Boot.bin wd0 (answering yes to rewriting MBR)
> 4. Reboot
>
> Still, I get "Using Drive: 0 Parition: 3"
>
> When I get to the boot prompt, I see this...
>
> reading boot......
> probing: pc0 com0 mem[640K 510M a20=on]
> disk: fd0 fd1 hd0 hd1
> >> OpenBSD BOOT 2.00
> boot> boot wd0a:/bsd
> booting wd0a:/bsd: open wd0a:/bsd: Invalid argument
> failed(22). will try /bsd.old
> boot>
>
> I know that wd0 and wd1 exist (see dmesg!)....but am at a loss as
> to where the problem lies. Any help is appreciated.
>
> - Eric
>
> start dmesg
>
> OpenBSD 3.3-current (RAMDISK_CD) #49: Thu Apr 17 04:33:20 MDT 2003
> deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.40 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD,3DNOW
> real mem = 536330240 (523760K)
> avail mem = 492302336 (480764K)
> using 4278 buffers containing 26918912 bytes (26288K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(ff) BIOS, date 01/15/03, BIOS32 rev. 0 0xf0230
> pcibios0 at bios0: rev. 2.1 0xf0200/0xb00
> pcibios0: PCI BIOS has 8 Interrupt Routing table entries
> pcibios0: no compatible PCI ICU found
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_SL Host" rev 0x32
> pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_SL Host" rev 0x00
> pci1 at pchb1 bus 1
> vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
> wd0 at pciide0 channel 0 drive 0: <ST340016A>
> wd0: 16-sector PIO, LBA, 38162MB, 16383 cyl, 16 head, 63 sec, 78156288 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8245B, 1.16> SCSI0 5/cdrom removable
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> cd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> wd1 at pciide0 channel 1 drive 0: <IC35L120AVVA07-0>
> wd1: 16-sector PIO, LBA, 114473MB, 16383 cyl, 16 head, 63 sec, 234441648 sectors
> wd1(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 10, OHCI version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pchb2 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI Bridge" rev 0x00
> pchb3 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x03
> pchb4 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x03
> pci2 at pchb4 bus 2
> bge0 at pci2 dev 4 function 0 "Broadcom BCM5703X" rev 0x02: irq 7: address: 00:02:55:b7:78:c5
> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseTX PHY, rev. 2
> bge1 at pci2 dev 5 function 0 "Broadcom BCM5703X" rev 0x02: irq 5: address: 00:02:55:b7:78:c6
> brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseTX PHY, rev. 2
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> biomask c400 netmask c4a0 ttymask c4a2
> rd0: fixed, 3560 blocks
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

--

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]