From: Andrea Riela (mlnesys.it)
Date: Mon Jul 21 2003 - 12:28:47 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Sorry,

This is the dmesg:

observe# dmesg
 port error, giving up port 2
syncing disks... ng upOpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST
2003
    deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon XP Model 8 (Thoroughbred) ("AuthenticAMD" 686-class)
1.25 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SIMD
real mem = 804827136 (785964K)
avail mem = 740536320 (723180K)
using 4278 buffers containing 40345600 bytes (39400K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/10/03, BIOS32 rev. 0
0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 0xf7940/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 PCI System I/O
Chipset" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb800 0xcb800/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 735 Host-PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 PCI System I/O Chipset" rev
0x00
ohci0 at pci0 dev 2 function 2 "SIS 5597/5598 USB" rev 0x07: irq 12,
OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 3 "SIS 5597/5598 USB" rev 0x07: irq 5, OHCI
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 16383 cyl, 16 head, 63 sec, 160086528
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97 Audio" rev 0xa0: irq 10,
SiS7012 AC97
ac97: codec id 0x434d4941
audio0 at auich0
sis0 at pci0 dev 3 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 10
address 00:0a:e6:79:14:03
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
uhci0 at pci0 dev 19 function 0 "VIA VT83C572 USB" rev 0x50: irq 11
usb2 at uhci0: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 19 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
usb3 at uhci1: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
"VIA VT6202 USB 2.0" rev 0x51 at pci0 dev 19 function 2 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 5860 netmask 5c60 ttymask 5ce2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhub2: port error, restarting port 1
uhub2: port error, giving up port 1
uhub2: port error, restarting port 2
uhub2: port error, giving up port 2
uhub3: port error, restarting port 1
uhub3: port error, giving up port 1
uhub3: port error, restarting port 2
uhub3: port error, giving up port 2
syncing disks... ng upOpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST
2003
    deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon XP Model 8 (Thoroughbred) ("AuthenticAMD" 686-class)
1.25 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SIMD
real mem = 804827136 (785964K)
avail mem = 740536320 (723180K)
using 4278 buffers containing 40345600 bytes (39400K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/10/03, BIOS32 rev. 0
0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 0xf7940/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 PCI System I/O
Chipset" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb800 0xcb800/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 735 Host-PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 PCI System I/O Chipset" rev
0x00
ohci0 at pci0 dev 2 function 2 "SIS 5597/5598 USB" rev 0x07: irq 12,
OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 3 "SIS 5597/5598 USB" rev 0x07: irq 5, OHCI
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 16383 cyl, 16 head, 63 sec, 160086528
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97 Audio" rev 0xa0: irq 10,
SiS7012 AC97
ac97: codec id 0x434d4941
audio0 at auich0
sis0 at pci0 dev 3 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 10
address 00:0a:e6:79:14:03
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
uhci0 at pci0 dev 19 function 0 "VIA VT83C572 USB" rev 0x50: irq 11
usb2 at uhci0: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 19 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
usb3 at uhci1: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
"VIA VT6202 USB 2.0" rev 0x51 at pci0 dev 19 function 2 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 5860 netmask 5c60 ttymask 5ce2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhub2: port error, restarting port 1
uhub2: port error, giving up port 1
uhub2: port error, restarting port 2
uhub2: port error, giving up port 2
uhub3: port error, restarting port 1
uhub3: port error, giving up port 1
uhub3: port error, restarting port 2
uhub3: port error, giving up port 2
observe#

Thanks for all
Andrea Riela

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]