From: Andrea Riela (mlnesys.it)
Date: Mon Jul 21 2003 - 12:31:41 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Thanks Mike,

But the 6.4 and the 80Gb are IDE drivers.
I've reinstalled the OS and the services ...

Andrea Riela

> -----Messaggio originale-----
> Da: owner-miscopenbsd.org [mailto:owner-miscopenbsd.org]
> Per conto di Mike Ayers
> Inviato: lunedì 21 luglio 2003 18.49
> A: Andrea Riela
> Cc: miscopenbsd.org
> Oggetto: Re: Obsd 3.3 + services + freeze
>
>
> Andrea Riela wrote:
>
> > What's the problem? Probably maxproc or maxfiles?
> > With an HD 6.4Gb I haven't that problem, with my new HD 80Gb maxtor
> > with 80 pin connector ya.
>
> I believe that you mean that you had a 6.4GB drive that
> you replaced
> with an 80GB drive to get more space, and that the problems
> began after
> that replacement. Also, I read this to mean that the new drive is
> SCSI-3, and the old drive was not. If this is correct, I'd recommend
> checking the hardware thoroughly before making any configuration
> changes. There should have been some form of test suite that
> came with
> the hard drive - run that if you can. If you get failures,
> then you've
> probably found your problem. If not, well... it's good to check your
> hardware regularly, anyway!
>
>
> HTH,
>
> /|/|ike

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]