From: Jason Eggleston (jegglestonnextweb.net)
Date: Tue Aug 03 2004 - 18:09:52 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I purchased two Adaptec 1210SA controllers (new, from IronSystems), which is
supposed to be supported by OpenBSD-current. However, it does not, and I'm
starting to understand why not.

The card has two chips:

1. BIOS chip - M29W010B90N1
2. Serial ATA controller chip - Silicon Image SataLink Sil3112ACT144

There is no RAID controller chip, and unless the aac driver implements
software raid, I don't see how this card will work. Also, the aac driver
doesn't detect the card correctly. Maybe there are two versions of this
card out there, but in any case, here's the dmesg when booting from the
install cd for 3.5-current (I also tried the "B" floppy, same result):

# tip tty00
connected
>> OpenBSD/i386 BOOT 2.06
boot>
booting fd0a:/bsd: 4404064+734000=0x4e67d8
entry point at 0x100120
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 3.5-current (RAMDISK_CD) #312: Sun Aug 1 16:48:53 MDT 2004
    deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1073324032 (1048168K)
avail mem = 988602368 (965432K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/18/03, BIOS32 rev. 0 0xf0010
pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 0xf47e0/256 (14 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2480
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x254c rev
0x01
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH HI_B vppb 1" rev 0x01
pci1 at ppb0 bus 1
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
9, address: 00:e0:81:26:4c:de
em1 at pci2 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
9, address: 00:e0:81:26:4c:df
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
ppb3 at pci0 dev 3 function 0 "Intel E7500 MCH HI_C vppb 1" rev 0x01
pci4 at ppb3 bus 4
"Intel P64H2 IOxAPIC" rev 0x04 at pci4 dev 28 function 0 not configured
ppb4 at pci4 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci5 at ppb4 bus 5
em2 at pci5 dev 3 function 0 "Intel PRO/1000MF DP (82546EB)" rev 0x03: irq
7, address: 00:04:23:a1:7b:ac
em3 at pci5 dev 3 function 1 "Intel PRO/1000MF DP (82546EB)" rev 0x03: irq
7, address: 00:04:23:a1:7b:ad
"Intel P64H2 IOxAPIC" rev 0x04 at pci4 dev 30 function 0 not configured
ppb5 at pci4 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci6 at ppb5 bus 6
em4 at pci6 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
7, address: 00:e0:81:26:4c:dc
em5 at pci6 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq
7, address: 00:e0:81:26:4c:dd
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci7 at ppb6 bus 7
fxp0 at pci7 dev 1 function 0 "Intel 82557" rev 0x10: irq 5, address
00:e0:81:26:50:b4
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
vga1 at pci7 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "CMD Technology", unknown product 0x240 (class mass storage subclass
RAID, rev 0x02) at pci7 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff45 netmask ffe5 ttymask ffe7
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell?

Thanks,
 -Jason

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]