From: Marco Peereboom (slashpeereboom.us)
Date: Tue Aug 03 2004 - 20:07:12 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Apply the patch in the bottom of that email and send me the dmesg.
http://www.sigmasoft.com/cgi-bin/wilma_hiliter/openbsd-misc/200407/
msg01780.html

So, what could be the case is that you have one of those hostraid
things. That means that the raid code actually runs in the driver;
only windows (and possibly linux) supports the proprietary raid code.

If you send me the dmesg I can add it to aac to see if it works or not.

Thanks,
/marco

PS: I need to do some research on the 1210 because I believe there are
two versions and i386.html might be confusing people.

On Aug 3, 2004, at 6:09 PM, Jason Eggleston wrote:

> I purchased two Adaptec 1210SA controllers (new, from IronSystems),
> which is
> supposed to be supported by OpenBSD-current. However, it does not,
> and I'm
> starting to understand why not.
>
> The card has two chips:
>
> 1. BIOS chip - M29W010B90N1
> 2. Serial ATA controller chip - Silicon Image SataLink Sil3112ACT144
>
> There is no RAID controller chip, and unless the aac driver implements
> software raid, I don't see how this card will work. Also, the aac
> driver
> doesn't detect the card correctly. Maybe there are two versions of
> this
> card out there, but in any case, here's the dmesg when booting from the
> install cd for 3.5-current (I also tried the "B" floppy, same result):
>
> # tip tty00
> connected
>>> OpenBSD/i386 BOOT 2.06
> boot>
> booting fd0a:/bsd: 4404064+734000=0x4e67d8
> entry point at 0x100120
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights
> reserved.
> Copyright (c) 1995-2004 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 3.5-current (RAMDISK_CD) #312: Sun Aug 1 16:48:53 MDT 2004
> deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
> ,CFLU
> SH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 1073324032 (1048168K)
> avail mem = 988602368 (965432K)
> using 4278 buffers containing 53768192 bytes (52508K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 11/18/03, BIOS32 rev. 0
> 0xf0010
> pcibios0 at bios0: rev. 2.1 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev. 1.0 0xf47e0/256 (14 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2480
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #7 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x254c
> rev
> 0x01
> ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH HI_B vppb 1" rev 0x01
> pci1 at ppb0 bus 1
> "Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
> ppb1 at pci1 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
> pci2 at ppb1 bus 2
> em0 at pci2 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
> irq
> 9, address: 00:e0:81:26:4c:de
> em1 at pci2 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
> irq
> 9, address: 00:e0:81:26:4c:df
> "Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
> ppb2 at pci1 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 3 function 0 "Intel E7500 MCH HI_C vppb 1" rev 0x01
> pci4 at ppb3 bus 4
> "Intel P64H2 IOxAPIC" rev 0x04 at pci4 dev 28 function 0 not configured
> ppb4 at pci4 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
> pci5 at ppb4 bus 5
> em2 at pci5 dev 3 function 0 "Intel PRO/1000MF DP (82546EB)" rev 0x03:
> irq
> 7, address: 00:04:23:a1:7b:ac
> em3 at pci5 dev 3 function 1 "Intel PRO/1000MF DP (82546EB)" rev 0x03:
> irq
> 7, address: 00:04:23:a1:7b:ad
> "Intel P64H2 IOxAPIC" rev 0x04 at pci4 dev 30 function 0 not configured
> ppb5 at pci4 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
> pci6 at ppb5 bus 6
> em4 at pci6 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
> irq
> 7, address: 00:e0:81:26:4c:dc
> em5 at pci6 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
> irq
> 7, address: 00:e0:81:26:4c:dd
> uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
> pci7 at ppb6 bus 7
> fxp0 at pci7 dev 1 function 0 "Intel 82557" rev 0x10: irq 5, address
> 00:e0:81:26:50:b4
> inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
> vga1 at pci7 dev 2 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> vendor "CMD Technology", unknown product 0x240 (class mass storage
> subclass
> RAID, rev 0x02) at pci7 dev 3 function 0 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA,
> channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> "Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not
> configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ff45 netmask ffe5 ttymask ffe7
> rd0: fixed, 3560 blocks
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> (I)nstall, (U)pgrade or (S)hell?
>
>
> Thanks,
> -Jason

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]