From: Hanford, Seth (shanfordckure.com)
Date: Wed Sep 01 2004 - 12:39:37 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I installed the following packages on my sparc64:
postfix-sasl2-2.1.4.tgz
cyrus-sasl-2.1.19.tgz

and whenever I try to 'man saslauthd', the output is severely garbled.
According to the install log from the cyrus package, saslauthd is dropped in
/usr/local/man/cat8; the rest of the man pages are dropped in their
appropriate man folders and appear fine. I'm not positive, but from what I
can find on the net, cat is for legacy compatibility and man is the new
style. Perhaps having the manpage in the wrong directory is causing it to
be rendered with the wrong options? Perhaps I'm just ignorant and something
else is afoot.

I have removed these packages and reinstalled from multiple sites
(ftp3.usa.openbsd.org, ftp.lug.udel.edu), but the problem persists. The
snapshot of -current that I'm using is from Aug 18; the package is from
today's snapshots (Sep. 1).

I double-checked the ports tree and its PLIST shows saslauthd.0 heading to
/usr/local/man/cat8 as well.

I just wanted to let folks know before the package got pushed to the
3.6-release CD, in case there was something wrong.

Thanks,
Seth

> console is keyboard/display
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2004 OpenBSD. All rights reserved.
http://www.OpenBSD.org
>
> OpenBSD 3.6-beta (GENERIC) #278: Wed Aug 18 20:23:09 MDT 2004
> deraadtsparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
> total memory = 268435456
> avail memory = 235323392
> using 1638 buffers containing 13418496 bytes of memory
> bootpath: /pci1f,0/pci1,1/ide3,0/disk0,0
> mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz)
> cpu0 at mainbus0: SUNW,UltraSPARC-IIi 333 MHz, version 0 FPU
> cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external
(64 b/l)
> psycho0 at mainbus0 addr 0xfffc4000
> SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
> DVMA map: c0000000 to e0000000
> IOTDB: 1362000 to 13e2000
> pci0 at psycho0
> ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
> pci1 at ppb0 bus 1
> ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
> auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
> power at ebus0 addr 724000-724003 ipl 37 not configured
> SUNW,pll at ebus0 addr 504000-504002 not configured
> sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
> sabtty0 at sab0 port 0
> sabtty1 at sab0 port 1
> comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 34
> wskbd0 at comkbd0: console keyboard
> com0 at ebus0 addr 3062f8-3062ff ipl 42, mouse: ns16550a, 16 byte fifo
> lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34:
polled
> fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39
not configured
> clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80b53cf4
> flashprom at ebus0 addr 0-fffff not configured
> audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ipl 35 ipl 36: nvaddrs 0
> audio0 at audioce0
> hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: address
08:00:20:b5:3c:f4
> nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
> hme0: using ivec 3021 for interrupt
> vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c
> wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0
> pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using ivec 1820 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD200EB-53BHF0>
> wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <CD-ROM, Drive/F5A, B1.4> SCSI0 5/cdrom
removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
> pci2 at ppb1 bus 2
> pcons at mainbus0 not configured
> No counter-timer -- using %tick at 333MHz as system clock.
> root on wd0a
> rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
> WARNING: / was not properly unmounted
> WARNING: clock gained 6 days -- CHECK AND RESET THE DATE!
>

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]