From: R. Clayton (rclaytonmonmouth.edu)
Date: Wed Sep 01 2004 - 14:35:29 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I'm running 3.5 on an elderly toshiba satellite laptop, and I'm having problems
using a USB flash memory stick: I plug the stick in and get

  $ dmesg | tail -20
  sysbeep0 at pcppi0
  lpt0 at isa0 port 0x378/4 irq 7
  npx0 at isa0 port 0xf0/16: using exception 16
  pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
  pccom1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
  fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
  fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
  cardslot0 at cbb0 slot 0 flags 0
  cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x0
  pcmcia0 at cardslot0
  biomask c840 netmask c840 ttymask d8c2
  pctr: 686-class user-level performance counters enabled
  mtrr: Pentium Pro MTRR support
  dkcsum: wd0 matched BIOS disk 80
  root on wd0a
  rootdev=0x0 rrootdev=0x300 rawdev=0x302
  umass0 at uhub0 port 1 configuration 1 interface 0
  umass0: PNY Attache 2.0, rev 2.00/2.00, addr 2
  umass0: using SCSI over Bulk-Only
  scsibus1 at umass0: 2 targets

  $ usbdevs
  addr 1: UHCI root hub, Intel
   addr 2: Attache 2.0, PNY

  $ for i in 0 1 2 3 4 ; do sudo disklabel sd$i ; done
  disklabel: /dev/rsd0c: Device not configured
  disklabel: /dev/rsd1c: Device not configured
  disklabel: /dev/rsd2c: Device not configured
  disklabel: /dev/rsd3c: Device not configured
  disklabel: /dev/rsd4c: Device not configured

  $

The stick works correctly under linux. Any suggestions?

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]