From: Alexander Farber (Alexander.Farbert-online.de)
Date: Sat Dec 18 2004 - 08:25:13 CST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

because of a hard disk failure I had to reinstall by dual-boot
desktop with the "SPDIFF audio" version of the A78VX mainboard.
And because I needed a slot for a SATA controller I had to
take the cmpci card out. So I tried to switch on the onboard
sound chip "VIA VT8233 AC97" and while it seems to work fine
on Windows XP on the same PC, the -current (few days old) GENERIC
kernel hangs at the boot process, when this line shows:

  auvia0 at pci0 dev 17 function5 "VIA VT8233 AC97" rev 0x50

I've tried to search the archives, but the only
mails I could find, are my own, for the same PC:

  http://monkey.org/openbsd/archive/misc/0301/msg00729.html

Does anybody have any new information please? The dmesg is below.

It is an ASUS A7V8X mainboard, a "sound SPDIFF" version
with a non-gigabit Broadcom NIC (BCM 4401) onboard:

  http://www.asus.com/prog/spec.asp?m=A7V8X

Regards
Alex

o probe returned 0
>>> probing for pciide*
>>> pciide probe returned 0
>>> probing for ppb*
>>> ppb probe returned 0
>>> probing probing for rl*
>>> rl probe returned 0
>>> probing for vr*
>>>v*
>>> sv probe returned 0
>>> probing for bktr0
>>> bktr probe returned 0
>>> probing for xl*
>>> xl probe returned 0
>>> probing for fxp*
>>> fxp probe returned 0
>>> probing for em*
>>> em or wb*
>>> wb probe returned 0
>>> probing for sf*
>>> sf probe returned 0
>>> probing for sis*
>>> sis probe returned 0
>>> prong for cbb*
>>> cbb probe returned 0
>>> probing for skc*
>>> skc probe returned 0
>>> probing for puc*
>>> puc probe returned 0
>>> probing for wi*
>>> wi probe returned 0
>>> probing for an*robing for ste*
>>> ste probe returned 0
>>> probing for uhci*
>iha probe returned 0
>>> probing for trm*
>>> trm probe returnedprobe returned 0
>>> probing for re*
>>> re probe returned 0
>>>turned 0
>>> probing for iwi*
>>> iwi probe returned 0
>>> probi
>>> stge probe returned 0
>>> probing for viaenv*
>>> viaenv pr> iha probe returned 0
>>> probing for trm*
>>> trm probe return probing for ath*
>>> ath probe returned 0
>>> probing for atw*
ng for nge*
>>> nge probe returned 0
>>> probing for bge*
>>> bge*
>>> stge probe returned 0
>>> probing for viaenv*
>>> viaenv probe returned 0
>>> probing for bce*
>>> bce probe returned 1
>>> probing for ath*
>>> ath probe returned 0
>>> probing for atwturned 0
>>> probing for pchb*
>>> pchb probe returned 0
>>> prodesc*
>>> geodesc probe returned 0
>>> probing for pcib*
>>> pciturned 0
>>> probing for gscpcib*
>>> gscpcib probe returned 0
>>> probing for hme*
>>> hme probe returned 0
>>> probing for pcic*
>>> pcic probe returned 0
>>> bce probe won
bce0 at pci0 dev 9 function 0 "Broadcom BCM4401" rev 0x01: irq 7, address 00:e0:18:d1:19:99
>>> probing for nsphy*
>>> nsphy probe returned 0
>>> probing for nsphyter*
>>> nsphyter probe returned 0
>>> probing for qsphy*
>>> qsphy probe returned 0
>>> probing for inphy*
>>> inphy probe returned 0
>>> probing for iophy*
>>> iophy probe >> probing for adv*
>>> adv probe returned 0
>>> probing for adw*
>>> adw probe returned 0
>>> probing for bha*
>>> bha probe returned 0
>>> probing for twe*
>>> twe probe returned 0
>>> probiphy probe returned 0
>>> probing for mtdphy*
>>> mtdphy probe rep probe returned 0
>>> probing for eap*
>>> eap probe returned 0 probing for sqphy*
>>> sqphy probe returned 0
>>> probing for tqphy*
>>> tqphy probe returned 0
>>> probing for ukphy*
>>> ukphed 0
>>> probing for bmtphy*
>>> bmtphy probe returned 0
>>> prohy*
>>> xmphy probe returned 0
>>> probing for amphy*
>>> amphy probe returned 0
>>> probing for acphy*
>>> acphy probe returnedng for urlphy*
>>> urlphy probe returned 0
>>> probing for rgephic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0036, rev. 0
>>> probing for vga*
>>> vga probe returned 0
>>> probing for ahc*
>>> ahc probe returned 0
>>> probing for ahd*
>>> ahd probe returned 0
>>> probing for dpt*
>>> dpt probe returned 0
>>> probing for adv*
>>> adv probe returned 0
>>> probing for adw*
>>> adw probe returned 0
>>> probing for bha*
>>> bha probe iop probe returned 0
>>> probing for eap*
>>> eap probe returned 0
>>> probing for eso*
>>> eso probe returned 0
>>> probing fod 0
>>> probing for clcs*
>>> clcs probe returned 0
>>> probing for clct*
>>> clct probe returned 0
>>> probing for maestro*
>>>urned 0
>>> probing for yds*
>>> yds probe returned 0
>>> probing for fms*
>>> fms probe returned 0
>>> probing for auvia*
>>> auvia probe returned 0
>>> probing for gdt*
>>> gdt probe returned 0
>>> probing for aac*
>>> aac probe returned 0
>>> probing for cac*
>>> cac probe returned 0
>>> probing for isp*
>>> isp probe returned 0
>>> probing for mpt*
>>> mpt probe returned 0
>>> probing for de*
>>> de probe returned 0
>>> probing for ep0
>>> *
>>> le probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> probing for neo*
>>> neo probe returned 0
>>> probing for pciide*
>>> pciide probe returned 0
>>> probing for ppb*
>>> ppb probe returned 0
>>> probing for cy*
>>> cy probe returned 0
>>> probing for lmc*
>>> lmc probe returned 0
>>> probing for mtd*
>>> mtd probe returned 0
>>> probing for rl*
>>> rl proxp probe returned 0
>>> probing for sv*
>>> sv probe returned 0
>>> probing for bktr0
>>> bktr probe returned 0
>>> probing for eturned 0
>>> probing for em*
>>> em probe returned 0
>>> probineturned 0
>>> probing for skc*
>>> skc probe returned 0
>>> prob> probing for ipw*
>>> ipw probe returned 0
>>> probing for iwi*
>>> iwi probe returned 0
>>> probing for cmpci*
>>> cmpci probe>> pcscp probe returned 0
>>> probing for nge*
>>> nge probe returned 0
>>> probing for bge*
>>> bge probe returned 0
>>> probinrobe returned 0
>>> probing for atw*
>>> atw probe returned 0
>>robe returned 0
>>> probing for geodesc*
>>> geodesc probe returned 0
>>> probing for pcib*
>>> pcib probe returned 0
>>> probincib*
>>> gscpcib probe returned 0
>>> probing for hme*
>>> hme probe returned 0
>>> probing for pcic*
>>> pcic probe returned 0
>>> no winning probe
"AVM Fritz v2.0 ISDN" rev 0x02 at pci0 dev bing for ahd*
>>> ahd probe returned 0
>>> probing for dpt*
>>> dpt probe returned 0
>>> probing for adv*
>>> adv probe returned 0
>>> probing for adw*
>>> adw probe returned 0
>>> probing fore returned 0
>>> probing for ami*
>>> ami probe returned 0
>>> png for emu*
>>> emu probe returned 0
>>> probing for autri*
>>> autri probe returned 0
>>> probing for clcs*
>>> clcs probe retung for maestro*
>>> maestro probe returned 0
>>> probing for esa*
>>> esa probe returned 0
>>> probing for yds*
>>> yds probe reOpenBSD 3.6-current (GENERIC) #197: Sat Dec rned 0
>>> probing for isp*
>>> isp probe returned 0
>>> probing for mpt*
>>> mpt probe returned 0
>>> probing for de*
>>> de probe returned 0
>>> probing for ep0
>>> ep probe returned 0
>>> probing for ep*
>>> ep probe returned 0
>>> probing for fpa*
>>> fpa probe returned 0
>>> probing for le*
>>> le probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> probing for6-current (GENERIC) #197: Sat Dec 11 21:39:34 MST 2004
    deraae probe returned 0
>>> probing for ppb*
>>> ppb probe returned 0
>>> probing for cy*
>>> cy probe returned 0
>>> probing for lmc*
>>> lmc probe returned 0
>>> probing for mtd*
>>> mtd probe returned 0
>>> probing for rl*
>>> rl probe returned 0
>>> probing for vr*
>>> vr probe returned 0
>>> probing for tl*
>>> tl probe returned 0
>>> probingOpenBSD 3.6-current (GENERIC) #197: Sat Dec 11 21:39:34 MST 2004
    deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP 2400+ ("AuthenticAMD" 686-class) 1.99 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536432640 (523860K)
avail mem = 482508800 (471200K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
User Kernel Config
UKC> find auvu\^H \^Hia
 66 auvia* at pci* dev -1 function -1 flags 0x0
UKC> disable auvia
 66 auvia* disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(bf) BIOS, date 04/21/04, BIOS32 rev. 0 0xf1aa0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 0xf0000/0x2162
pcibios0: PCI IRQ Routing Table rev 1.0 0xf2080/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x6000! 0xd8000/0x1000 0xdc000/0x800 0xe0000/0x4000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8235 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x4150 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x4170 (class display subclass miscellaneous, rev 0x00) at pci1 dev 0 function 1 not configured
bce0 at pci0 dev 9 function 0 "Broadcom BCM4401" rev 0x01: irq 7, address 00:e0:18:d1:19:99
ukphy0 at bce0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0036, rev. 0
"AVM Fritz v2.0 ISDN" rev 0x02 at pci0 dev 11 function 0 not configured
fxp0 at pci0 dev 13 function 0 "Intel 82557" rev 0x08, i82559: irq 11, address 00:02:b3:1a:eb:57
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ahc1 at pci0 dev 14 function 0 "Adaptec AHA-2940U" rev 0x00: irq 3
scsibus0 at ahc1: 8 targets
cd0 at scsibus0 targ 4 lun 0: <PLEXTOR, CD-R PX-W124TS, 1.07> SCSI2 5/cdrom removable
pciide0 at pci0 dev 15 function 0 "CMD Technology AAR-1210SA" rev 0x02: DMA
pciide0: using irq 7 for native-PCI interrupt
pciide0: port 1: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 1 drive 0: <SAMSUNG SP1614C>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:1:0): using BIOS timings, Ultra-DMA mode 7
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 9
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide1 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8160B, 0009> SCSI0 5/cdrom removable
cd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
"VIA VT8233 AC97" rev 0x50 at pci0 dev 17 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e7ed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhub4 at uhub2 port 1
uhub4: Kawatsu Semiconductor MiniHub 4000P, class 9/0, rev 1.10/1.00, addr 2
uhub4: 4 ports with 4 removable, self powered
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: WACOM ET-0405-UV1.1-1, rev 1.00/1.11, addr 3, iclass 3/1
uhidev0: 3 report ids
uhid0 at uhidev0 reportid 2: input=7, output=0, feature=2
uhid1 at uhidev0 reportid 3: input=0, output=0, feature=2
ugen0 at uhub4 port 4
ugen0: vendor 0x0421 Nokia Connectivity Cable DKU-5, rev 1.10/3.0a, addr 4

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]