From: David Clarke (pigwin32gmail.com)
Date: Tue Jan 04 2005 - 03:42:53 CST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi

I've installed 3.6 on an Apple Cube, intending to run it headless as a
development server (nice and quiet to keep my family happy). The
cube has been modded by the previous owner including a
processor card upgrade. The mod that appears to be giving me
grief is the 3rd-party DVD writer. There appears to have been some
jiggery pokery involved in the installation and the Open Firmware
aliases for hd & cd are reversed (which means eject hd: actually
ejects the cd). Apart from my usual wrestle with disklabel & fdisk,
the install was fine but as you can see in dmesg below, I have to
specify where the root device is. I could just about live with this but
I really want to run it headless. I've googled but haven't been able
to locate anything particularly useful.

Any help would be appreciated.

Thanks
Dave

[ using 373324 bytes of bsd ELF symbol table ]
console out [ATY,Rage128Pd]console in [keyboard] USB found
: memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr
90020000, size 20000: memtag 8000, iotag 8000: width 640 linebytes 768
height 480 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 3.6 (GENERIC) #47: Fri Sep 17 14:55:19 MDT 2004
    deraadtmacppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 129826816 (126784K)
avail mem = 113201152 (110548K)
using 1254 buffers containing 6488064 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 7455 (Revision 303): 1200 MHz: 256KB L2 cache, 2MB L3 cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Rage Fury" rev 0x00, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x16
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0: version 0x4614
gpio_obio0 at macobio0
gpio_obio1 at gpio_obio0 irq 47
programmer-switch at gpio_obio0 not configured
zsc0 at macobio0: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at macobio0 irq 25: via-pmu 0 targets
aed0 at adb0 addr 0: ADB Event device
apm0 at adb0: battery flags 0x9, 0% charged
ki2c0 at macobio0
wdc0 at macobio0 irq 19: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-815, DWDB> SCSI0
5/cdrom removable
wd0 at wdc0 channel 0 drive 1: <ST360015A>
wd0: 16-sector PIO, LBA, 57241MB, 117231408 sectors
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 irq 20: DMA
wdc2 at macobio0 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at uhub0 port 1
uhub1: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0,
rev 1.10/1.22, addr 2
uhub1: 3 ports with 2 removable, bus powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub2 at usb1
uhub2: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci1 dev 26
function 0 not configured
mpcpcibr2 at mainbus0: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x01: irq 41, address
00:30:65:ac:0b:62
lxtphy0 at gem0 phy 0: LXT971 10/100 media interface, rev. 1
bootpath: '/pcif2000000/mac-io17/ata-41f000/disk1/bsd'
boot device: lookup 'wd1a' failed.
root device : wd0a
swap device (default wd0b):
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]