From: Josh Black (raskchankyyahoo.com)
Date: Tue Jan 04 2005 - 17:22:08 CST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi -

I'm using a generic PC running 3.6 as my firewall. Everything was
working wonderfully until about 3 weeks ago when it started randomly
locking up. The entire machine freezes. It doesn't respond to pings,
the console keyboard doesn't work, nothing. The only thing I can do is
cycle the power.

So far I've tried swapping out the NICs, the keyboard, even the entire
PC itself for another spare one I have that runs 3.6 as well. Nothing
makes a difference.

I have been searching and searching trying to figure out why it's doing
this, but I can't find any answers. I checked /var/log/messages and
there are no error messages there. The screen doesn't show a kernel
panic or anything like that. I'm not even sure where I need to be
looking. Any ideas at all would be helpful at this point. Thanks!

Here is my dmesg:

OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
    deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID
2eal mem = 2595635\^R0 (253480K)
avail mem = 229957632 (224568K)
using 3194 buffers containing 13082624 bytes(12776K) of memory
mainbus0 (rOot)
bios0 at mainbus0: AT/286+(9f) BIOS, date 08/31/04, BIOS32 rev. 0
0xfb460
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 0xfded0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 3 5 9 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb200! 0xcc000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82845G/GL Video" rev 0x03:
aperture at 0xd8000000, size 0x8000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9.0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intal 82801DB USB" rev 0x02: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci1 at ppb0 bus 1
sis0 at pci1 dev 2 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 5, address 00:0f:b5:08:f9:af
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
sis1 at pci1 dev 3 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 10, address 00:0f:b5:08:da:29
nsphyter1 at sis1 phy 0: DP83815 10/100 integrated, rev. 1
rl0 at pci1 dev 9 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:11:5b:35:ec:2c
rlphy0 at rl0 phy 0: RTL internal phy
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00JHA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 08 <COMBO, IDE5232CO, 0040> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
"Intel 82801DB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 9,
ICH4 AC97
ac97: codec id 0x434d4983 (C-Media Eleatronics <83>)
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifk
biomask ed6d netmask ed6d ttymask fdef
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uhub0: port 1, set config at addr 2 failed
uhub0: device problem, disabling port 1

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]