OSEC

Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com
 
Re: [macppc] empty adb bus detection

From: Felix Kronlage (fkrhazardous.org)
Date: Thu Mar 02 2006 - 03:31:07 CST


On Mon, Feb 27, 2006 at 10:13:43PM +0000, Miod Vallat wrote:

> Could you guys with Apple hardware test the following diff, especially
> on cold boots or booting off cdrom? Thanks.

works here (667Mhz G4-Powerbook), dmesg attached.

felix
--
Felix Kronlage Tel: (+49)(0)441 - 36116410
kronlagebytemine.net Fax: (+49)(0)441 - 36116419
http://www.bytemine.net/ PGP/GPG: 0xD9AC74D0
bytemine - Entwicklungsmanufaktur fuer innovative Loesungen
[ using 340440 bytes of bsd ELF symbol table ]
console out [ATY,Crown_A]console in [keyboard] ADB found
using parent ATY,CrownParent:: memaddr b8000000 size 8000000, : consaddr bc008000, : ioaddr b0020000, size 20000: memtag 8000, iotag 8000: width 1280 linebytes 5120 height 854 depth 32
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 3.9 (GENERIC) #1: Thu Mar 2 09:57:53 CET 2006
    fkrpdx.bytemine.net:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 805306368 (786432K)
avail mem = 727023616 (709984K)
using 1254 buffers containing 40263680 bytes (39320K) of memory
mainbus0 (root): model PowerBook3,4
cpu0 at mainbus0: 7455 (Revision 0x201): 667 MHz: 256KB L2 cache, 1MB L3 cache
memc0 at mainbus0: uni-n
ki2c0 at memc0 offset 0xf8001000
iic0 at ki2c0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N2 AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility M7 LW" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 offset 0x59 irq 47
"programmer-switch" at macgpio0 offset 0x61 not configured
"firewire-linkon" at macgpio0 offset 0x5f not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio4" at macgpio0 offset 0x5c not configured
"gpio11" at macgpio0 offset 0x75 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x7, 94% charged
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
ki2c1 at macobio0 offset 0x18000
iic1 at ki2c1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <IBM-IC25N030ATCS04-0>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 offset 0x20000 irq 20: DMA
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8121, AA17> SCSI0 5/cdrom removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 offset 0x21000 irq 21: DMA
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:05:81:09
audio0 at snapper0
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0 "Texas Instruments PCI1410 CardBus" rev 0x02: irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
"AT&T/Lucent FW322 1394" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, address 00:03:93:8a:bd:f8
brgphy0 at gem0 phy 0: BCM5421 10/100/1000baseT PHY, rev. 1
bootpath: '/pcif2000000/mac-io17/ata-41f000/disk0/bsd.generic'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02