From: Jun-ichiro itojun Hagino (itojunitojun.org)
Date: Wed Mar 22 2006 - 17:02:01 CST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> > it seems that i cannot remap capslock to control with 3.9 (snap on
> > ftp.openbsd.org) userland. what has changed? encoding=us.swapcapsctrl
> > does not work too.
> On what arch are you seeing this problem?

        oops, sorry. macppc (iBook G3 2002 dual usb).

itojun

[ using 339180 bytes of bsd ELF symbol table ]
console out [ATY,Fall_A]console in [keyboard] ADB found
using parent ATY,FallParent:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 3.9-current (GENERIC) #0: Thu Mar 23 12:54:07 JST 2006
    rootpeach.itojun.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 671088640 (655360K)
avail mem = 601980928 (587872K)
using 1254 buffers containing 33554432 bytes (32768K) of memory
mainbus0 (root): model PowerBook4,3
cpu0 at mainbus0: 750FX (Revision 0x112): 700 MHz: 512KB L2 cache
memc0 at mainbus0: uni-n
ki2c0 at memc0 offset 0xf8001000
iic0 at ki2c0
admtmp0 at iic0 addr 0xac
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility M6 LY" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 offset 0x59 irq 47
"programmer-switch" at macgpio0 offset 0x61 not configured
"firewire-linkon" at macgpio0 offset 0x5b not configured
"cpu-vcore-select" at macgpio0 offset 0x6b not configured
"extint-gpio4" at macgpio0 offset 0x5c not configured
"gpio9" at macgpio0 offset 0x73 not configured
"extint-gpio12" at macgpio0 offset 0x64 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 99% charged
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
ki2c1 at macobio0 offset 0x18000
iic1 at ki2c1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <IBM-IC25N040ATCS04-0>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-RW CRX800E, 1.3p> SCSI0 5/cdrom removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:1e:f7:11
audio0 at snapper0
ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00
"Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address 00:03:93:c3:a7:e0
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
bootpath: '/pcif2000000/mac-io17/ata-41f000/disk0/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02
ugen0 at uhub1 port 2
ugen0: HCF USB V.90 Data/Fax Modem Apple internal modem, rev 1.10/1.00, addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: MOUSE SYSTEM USB RF Mouse Receiver, rev 1.10/0.00, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]