From: Gordon Grieder (grubgrub.net)
Date: Wed Apr 26 2006 - 13:12:32 CDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

I've installed 3.9 from CD on an AMD64X2 dual core machine. When booting
bsd.mp the system seems to only see one core (no CPU1 shows up)

I've only installed the OS and haven't done anything with the other two
hard disks (to be mirrored when running)

(as an aside, when I tried bsd.mp from 3.8, the machine whined loudly
with a lot of IDE timeouts and would lock up during bootup soon after
the message about the second core popped up. I could transcribe by hand
if anyone wants)

I've googled but nothing of relevance seems to show up.
Any ideas?

 Gord

Here's a dmesg:

OpenBSD 3.9 (GENERIC.MP) #736: Thu Mar 2 04:02:03 MST 2006
    deraadtamd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146758656 (2096444K)
avail mem = 1835532288 (1792512K)
using 22937 buffers containing 214884352 bytes (209848K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2004.79 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3D
NOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "ATI RX480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X600 (RV370)" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X600 (RV370) Sec" rev 0x00 at pci1 dev 0 function 1 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
ppb1 at pci0 dev 26 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci2 dev 17 function 0 "Texas Instruments PCI2250 PCI-PCI" rev 0x02
pci3 at ppb2 bus 3
sis0 at pci3 dev 0 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 5, address 00:00:24:c5:98:54
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci3 dev 1 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c5:98:55
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci3 dev 2 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 11, address 00:00:24:c5:98:56
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
sis3 at pci3 dev 3 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 7, address 00:00:24:c5:98:57
nsphyter3 at sis3 phy 0: DP83815 10/100 PHY, rev. 1
skc0 at pci2 dev 20 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x14, Marvell Yukon Lite (0x9): irq 7
sk0 at skc0 port A, address 00:15:f2:87:34:f6
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
ohci0 at pci0 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: irq 3, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: irq 5, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: irq 10, version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Acer Labs EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 30 function 0 vendor "Acer Labs", unknown product 0x1575 rev 0x00
"Acer Labs M7101 Power" rev 0x00 at pci0 dev 30 function 1 not configured
pciide0 at pci0 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to compatibility, channel 1 configured to co
mpatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2500JB-00GVA0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4167B, DL11> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 1 vendor "Acer Labs", unknown product 0x5288 rev 0x10: DMA (unsupported), channel 0 wired to native-PCI, chan
nel 1 wired to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <ST3400832AS>
wd1: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd2 at pciide1 channel 1 drive 0: <ST3400832AS>
wd2: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Chicony USB Keyboard, rev 1.10/3.90, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Chicony USB Keyboard, rev 1.10/3.90, addr 2, iclass 3/1
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd1 matches BIOS drive 0x82 IGNORED
wd2: no disk label
dkcsum: wd2 matches BIOS drive 0x81 IGNORED
dkcsum: wd2 matches BIOS drive 0x82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]