From: Otto Moerbeek (ottodrijf.net)
Date: Wed Nov 01 2006 - 09:44:50 CST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 1 Nov 2006, tobias Freitag wrote:

> Hi list,
>
> we (OpenBSD newbies) trying to install OpenBSD on a HP NetServer LC 3. The
> harddisks are connected with a scsi controller (Adaptec AIC-7880) that should
> be supported by OpenBSD 3.9 and 4.0, but both fail to load the driver.
>
> So no harddisks, no luck

Use floppy A, that one has the driver.
http://www.openbsd.org/i386.html shows (B) (C) in the driver listing,
meaning that driver is not on floppy B and C.

        -Otto

>
> dmesg.boot is attached
>
> --
> GMX DSL-Flatrate 0,- Euro* - \berall, wo DSL verf|gbar ist!
> NEU: Jetzt bis zu 16.000 kBit/s! http://www.gmx.net/de/go/dsl
> OpenBSD 4.0 (RAMDISKB) #34: Sat Sep 16 19:42:22 MDT 2006
> deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKB
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 450 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> real mem = 268005376 (261724K)
> avail mem = 240054272 (234428K)
> using 3297 buffers containing 13504512 bytes (13188K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(d1) BIOS, date 05/01/00, BIOS32 rev. 0 0xfd806
> pcibios0 at bios0: rev 2.1 0xfd710/0x8f0
> pcibios0: PCI IRQ Routing Table rev 1.0 0xfdf20/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> WARNING: can't reserve area for I/O APIC.
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x03
> pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-532E-B, 2.1A> SCSI0 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> "Intel 82371AB USB" rev 0x01 at pci0 dev 4 function 2 not configured
> "Intel 82371AB Power" rev 0x02 at pci0 dev 4 function 3 not configured
> ppb0 at pci0 dev 7 function 0 "DEC 21152 PCI-PCI" rev 0x03
> pci1 at ppb0 bus 1
> fxp0 at pci0 dev 8 function 0 "Intel 8255x" rev 0x05, i82558: irq 11, address 00:90:27:b6:89:5c
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
> "NS DP83815 10/100" rev 0x00 at pci0 dev 9 function 0 not configured
> "Adaptec AIC-7880" rev 0x01 at pci0 dev 10 function 0 not configured
> vga1 at pci0 dev 13 function 0 "Cirrus Logic CL-GD5446" rev 0x45
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask f7e5 netmask ffe5 ttymask ffe7
> rd0: fixed, 3800 blocks
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]