From: Marco Peereboom (slashpeereboom.us)
Date: Mon Nov 06 2006 - 06:13:46 CST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Might have to do with the fact that there is no apm device on your
machine. This is an acpi exclusive machine. Acpi is under active
development so stay tuned.

atstake atstake wrote:
> I am running OBSD 4.0-release (i386) on Toshiba Satellite A30.
> I started apmd and here's my ps output
>
> root 10023 0.0 0.1 240 316 ?? Ss 5:57AM 0:00.00 apmd
>
> But when I do "apm" it says
>
> Battery state: unknown, 0% remaining, unknown life estimate
> A/C adapter state: not known
> Performance adjustment mode: manual (3200 MHz)
>
> Also, "halt -p" doesn't work and I need to hard-shutdown. I got
> powerdown=YES
> in /etc/rc.shutdown.
>
> Here's my dmesg -
>
> OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
> deraadti386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel"
> 686-class) 3.21 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
>
> real mem = 468676608 (457692K)
> avail mem = 419454976 (409624K)
> using 4256 buffers containing 23535616 bytes (22984K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(4a) BIOS, date 04/07/05, BIOS32 rev. 0
> 0xfd700, SMBIOS rev. 2.31 0xd6010 (31 entries)
> bios0: TOSHIBA Satellite A30
> pcibios0 at bios0: rev 2.1 0xfd700/0x900
> pcibios0: PCI IRQ Routing Table rev 1.0 0xfdf00/224 (12 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x434c
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xf000 0xd0000/0x6000! 0xd6000/0x800!
> 0xd8000/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ATI RS300_133 Host" rev 0x02
> ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ohci0 at pci0 dev 19 function 0 "ATI SB200 USB" rev 0x01: irq 11,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1 at pci0 dev 19 function 1 "ATI SB200 USB" rev 0x01: irq 11,
> version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1
> uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> ehci0 at pci0 dev 19 function 2 "ATI SB200 USB2" rev 0x01: irq 11
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 6 ports with 6 removable, self powered
> piixpm0 at pci0 dev 20 function 0 "ATI SB200 SMBus" rev 0x17: SMI
> iic0 at piixpm0
> pciide0 at pci0 dev 20 function 1 "ATI IXP200 IDE" rev 0x00: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FA-60>
> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R6112, 1031> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> pcib0 at pci0 dev 20 function 3 "ATI SB200 PCI-ISA" rev 0x00
> ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI-PCI" rev 0x00
> pci2 at ppb1 bus 2
> "TI TSB43AB21 FireWire" rev 0x00 at pci2 dev 0 function 0 not configured
> ath0 at pci2 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11
> ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR4W, address
> 00:90:96:72:4d:f1
> rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 11, address
> 00:02:3f:d3:3a:7b
> rlphy0 at rl0 phy 0: RTL internal PHY
> cbb0 at pci2 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 11
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> auixp0 at pci0 dev 20 function 5 "ATI IXP200 AC97" rev 0x00: irq 11
> auixp0: soft resetting aclink
> auixp0: not up; resetting aclink hardware
> auixp0: not up; resetting aclink hardware
> auixp0: aclink hardware reset successful
> "ATI IXP200 Modem" rev 0x01 at pci0 dev 20 function 6 not configured
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> biomask ef75 netmask ef75 ttymask fff7
> pctr: user-level cycle counter enabled
> ath1 at cardbus0 dev 0 function 0 "Atheros Communications, Inc.,
> AR5001-0000-0000, Wireless LAN Reference Card": irq 11
> ath1: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> ac97: codec id 0x414c4740 (Avance Logic ALC202)
> ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
> audio0 at auixp0
> ath0: device timeout

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]