OSEC

Neohapsis is currently accepting applications for employment. For more information, please visit our website www.neohapsis.com or email hr@neohapsis.com
 
From: Chavez Gutierrez, Freddy (fchavezintercorp.com.pe)
Date: Fri Nov 02 2001 - 16:50:53 CST

  • Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

    This is an extract from http://www.snort.org/docs/faq.html :

    3.1 --faq-- --snort-- --faq-- --snort-- --faq-- --snort-- --faq--
    Q: How do I setup snort on a 'stealth' interface?

    A: Bring up the interface without an IP address on it. See FAQ 3.2...
        http://www.geocrawler.com/archives/3/4890/2000/9/0/4399696/
    A: Use an ethernet tap, or build your own 'receive-only' ethernet cable.
        http://personal.ie.cuhk.edu.hk/~msng0/sniffing_cable/index.htm
    A: Anyway, here is the cable I use:

        LAN Sniffer
        1 -----\ /-- 1
        2 ---\ | \-- 2
        3 ---+-*------- 3
        4 - | - 4
        5 - | - 5
        6 ---*-------- 6
        7 - - 7
        8 - - 8
        
        Basically, 1 and 2 on the sniffer side are connected, 3 and 6
        straight through to the LAN. 1 and 2 on the LAN side connect to 3 and
        6 respectively. This fakes a link on both ends but only allows
        traffic from the LAN to the sniffer. It also causes the 'incoming'
        traffic to be sent back to the LAN, so this cable only works well on
        a hub. You can use it on a switch but you will get ...err...
        interesting results. Since the switch receives the packets back in on
        the port it sent them out, the MAC table gets confused and after a
        short while devices start to drop off the switch. Works like a charm
        on a hub though.

    3.2 --faq-- --snort-- --faq-- --snort-- --faq-- --snort-- --faq--
    Q: How do I run snort on an interface with no IP address?

    A: ifconfig ethN up

    Freddy Chávez.

    -----Mensaje original-----
    De: Ashley Thomas [mailto:athomasunity.ncsu.edu]
    Enviado el: Friday, November 02, 2001 5:15 PM
    Para: snort-userslists.sourceforge.net
    Asunto: [Snort-users] Doing sniffing on interface without ip-address.

    hi,

    Where can i get some information how to listen on
    a network interface in PROMISCOUS mode without
    setting an ip-address on the interface.

    Any pointers / hints is welcome.

    thanks a lot
    Ashley

    _______________________________________________
    Snort-users mailing list
    Snort-userslists.sourceforge.net
    Go to this URL to change user options or unsubscribe:
    https://lists.sourceforge.net/lists/listinfo/snort-users
    Snort-users list archive:
    http://www.geocrawler.com/redir-sf.php3?list=snort-users

    _______________________________________________
    Snort-users mailing list
    Snort-userslists.sourceforge.net
    Go to this URL to change user options or unsubscribe:
    https://lists.sourceforge.net/lists/listinfo/snort-users
    Snort-users list archive:
    http://www.geocrawler.com/redir-sf.php3?list=snort-users